Loading ...
Loading ...
Loading ...
5
Temperature Adjustment
1. When the freezer is plugged in to a power outlet, press the
“set” button. The LED will display the factory pre-set
temperature of 0°F
2. To adjust the temperature:
a. Press the “set” button again
b. While the LED is flashing, press the “▲” or “▼”
buttons to reach the desired temperature
c. Once you have reached your desired set temperature,
wait until the LED stops flashing. The current internal
temperature will then be displayed. After the LED has
stopped flashing, you can check the set temperature
by pressing the set button again
d. To change the preset temperature again repeat steps
a., b. and c.
Fast Freeze Mode
Press the “FF” button to run the freezer on the “Fast Freeze” mode.
The Fast Freeze mode rapidly cools the unit to -8°F. The freezer
will then maintain this temperature.
Food Storage
Fresh foods should not be stored together with frozen foods. When
the temperature is set below 32°F, do not keep glass-bottled drinks
such as beer and lemonade, as the bottles might shatter.
Defrosting and Deodorizing
When the ice layer on the inner cabinet sides is over 0.2”, the
defrosting operation should be performed to improve the
refrigerating efficiency. To do this, follow these steps below:
1. Turn off the power, and remove all items located within the
chest.
2. Allow the ice to completely melt and discard water.
Tip: To remove bad odors place a piece of charcoal in the
chest
Note: Do not use the
refrigerator-freezer as
refrigerator when the
ambient temperature is
lower than 41°F
Note: Do not run the
unit on “FF” (fast
freeze) for more than
four hours, as this
might adversely affect
the refrigeration
system.
Note: Never remove
ice with a sharp
object or screwdriver
.
Loading ...
Loading ...
Loading ...