Loading ...
Loading ...
Loading ...
3
Proper Location
Position your portable freezer in a location where there is proper
air circulation and electrical connections.
Keep the portable freezer away from heat and direct sunlight if
possible.
This portable freezer is suitable for car use and camping
however, the appliance should not be exposed to rain or any
other severe weather elements.
This portable freezer should not be placed in a built-in or
recessed area. It is designed to be freestanding.
The normal operation of the freezer depends on heat radiation
from the condenser. For the initial use, remove all packaging
and allow at least 6” of room around the freezer (2” inches at
side, 4” at rear of unit).
Handling and Installation
1. Remove all interior and exterior packaging.
2. Position the freezer in a dry and well-ventilated place.
Keep the freezer away from direct sunlight, heaters and
corrosive gas.
3. Clean the interior surface with a little bit of lukewarm
water and a soft cloth.
4. When inserting the AC power-cord into the power socket,
make sure the power socket is a grounded 115V~AC /
60Hz socket. Also make sure that the unit’s grounding
prong has not being tampered with.
Note: When inserting the DC power-cord, make sure the input is
a 12V~DC / 24V power source.
5. When moving the freezer, always use both handles to the
carry the unit as level as possible. This is in order to
protect the compressor and the sealed system.
WARNING: Use two or more people to move and handle this unit. Failure to do
so can result in back or other injury. Carefully remove the packaging materials
and any shipping tape before using.
IMPORTANT: Do not remove any safety, warning, or product information labels
from your portable fridge/freezer.
NOTE: Because this unit
is compressor based,
ample space is required
around the unit to allow it
to exhaust properly.
Loading ...
Loading ...
Loading ...