Images are for demonstration only.
1 Product Overview
1910013821 REV1.0.0©2024 TP-Link
USB3.0 Type-A to SD & microSD 3.0 Adapter
USB-A Connector
*Achieve up to 200 MB/s read speeds with cutting-edge technology,
surpassing UHS-I 104 MB/s. This requires compatible devices
capable of such speeds. Actual transfer rates are not guaranteed
and may vary due to device conditions and environmental factors.
User Guide
microSD (TF) Card Slot
SD Card Slot
microSD (TF) Card / SD Card
Windows, iOS, macOS, iPadOS,
ChromeOS, Linux, Android, etc.
Input USB-A×1
Output
microSD (TF) Card slot ×1,
SD card slot ×1
Supports theoretical transfer
rates of up to 200 MB/s*
Memory Card
Transfer Speed
Supported
Memory Cards
Supported
Maximum
Card Size
Cable Length 150 mm (5.9 in)
Supported
Systems
2 TB or less
For technical support, replacement services, user guides, and
more information, please visit https://www.tp-link.com/support,
or simply scan the QR code.
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of directives
2014/30/EU, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tp-link.com/en/support/ce/
Safety Information
• When product has power button, the power button is one of the
way to shut o the product; when there is no power button, the only
way to completely shut o power is to disconnect the product or
the power adapter from the power source.
• Do not attempt to disassemble, repair, or modify the device. If you
need service, please contact us.
• Keep the device away from water, re, humidity or hot
environments.
• This equipment can be powered only by equipments that comply
with Power Source Class 2 (PS2) or Limited Power Source (LPS)
dened in the standard of IEC 62368-1.
Recycling
This product bears the selective sorting symbol for Waste
electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant to
European directive 2012/19/EU in order to be recycled or
dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling
organization or to the retailer when he buys a new electrical or
electronic equipment.
This adapter supports the Plug and Play feature. Plug the
USB-A connector into your host device, then insert your
microSD (TF) card and SD card into the corresponding slot.
Note: This device supports simultaneously reading and writing a
microSD (TF) card and an SD card.
2 Using the Adapter
microSD (TF) Card
USB-A Connector
USB-A Port
• With the gold contacts facing
down, insert the microSD (TF)
card into the slot until the card
is fully inserted.
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of the
Electromagnetic Compatibility Regulations 2016.
The original UK declaration of conformity may be found at
https://www.tp-link.com/support/ukca/
•
With the gold contacts facing up, insert the SD
card into the slot until the card is fully inserted.
SD Card
Product Name: USB3.0 Type-A to SD & microSD 3.0 Adapter
Model Number: UA430
Responsible party:
TP-Link Systems Inc.
Address: 10 Mauchly, Irvine, CA 92618
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: [email protected]
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or
TV interference caused by unauthorized modications to
this equipment. Such modications could void the user’s
authority to operate the equipment.
We, TP-Link Systems Inc., has determined that the
equipment shown as above has been shown to comply with
the applicable technical standards, FCC part 15. There is
no unauthorized change is made in the equipment and the
equipment is properly maintained and operated.
Issue Date: 2024-09-25
CE Mark Warning
This is a class B product. In a domestic environment, this
product may cause radio interference, in which case the
user may be required to take adequate measures
Operating Temperature: 0°C~40°C (32°F~104°F),
Storage Temperature: -40°C~60°C (-40°F ~140°F)
FCC Compliance Information Statement
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV
technician for help.
RECYCLING
This product bears the selective sorting symbol for Waste
electrical and electronic equipment (WEEE). This means that
this product must be handled pursuant to European
directive 2012/19/EU in order to be recycled or dismantled
to minimize its impact on the environment. User has the
choice to give his product to a competent recycling
organization or to the retailer when he buys a new electrical
or electronic equipment.
Indoor use only
DC voltage
AC voltage
Energy eciency marking (level VI)
Polarity of output terminals
Class II equipment
Operator’s manual
Caution
Explanation of the symbols on the product label
Symbols may vary from products.
Note: The product label can be on the product and its I.T.E. power supply.
Продукт сертифіковано згідно с правилами системи
УкрСЕПРО на відповідність вимогам нормативних
документів та вимогам, що передбачені чинними
законодавчими актами України.
BSMI Notice
安全諮詢及注意事項
•請使用原裝電源供應器或只能按照本產品注明的電源類型
使用本產品。
•清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔
劑或濕布進行清潔。
•注意防潮，請勿將水或其他液體潑灑到本產品上。
•插槽與開口供通風使用，以確保本產品的操作可靠並防止
過熱，請勿堵塞或覆蓋開口。
•請勿將本產品置放於靠近熱源的地方。除非有正常的通風，
否則不可放在密閉位置中。
•不要私自拆開機殼或自行維修，如產品有故障請與原廠或
代理商聯繫。
Pb
PCB
單元
外殼
五金組件
○ ○
Cd
○
○
○
○
g
○
○
○
CrV
○
○
○
○
PBB
○
○
○
○ ○
PBDE
○
○
○
○
配件及其他
備考1.〝超出0.1 wt %〞及〝超出0.01 wt %〞係指限用物質之百分比含
量超出百分比含量基準值
Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate
that the percentage content of the restricted substance exceeds
the reference percentage value of presence condition.
備考2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準
值。
Note 2：“○” indicates that the percentage content of the
restricted substance does not exceed the percentage of reference
value of presence.
備考3.〝－〞係指該項限用物質為排除項目。
Note 3：The “－” indicates that the restricted substance
corresponds to the exemption.
