EN Heat pad
Instruction for Use
HK 115
HK 58
HK 125
HK 58 Cosy
HK 115 Cosy
HK 125 XXL Cosy
2
ENGLISH
Contents
Explanation of symbols
The following symbols are used on the device, in these instructions for use, on the packaging and on the
type plate for the device:
WARNING: Warning of risks of injury or health hazards
CAUTION: Safety information about possible damage to appliance/accessories
NOTE: Important information
Read the instructions Do not insert pins
Do not use folded or rucked
Not to be used by very young children
(0 - 3years)
Manufacturer
The device has double protective insulation and therefore complies with protection class 2.
Please dispose of the device in accordance with EC Directive – WEEE (Waste Electrical
and Electronic Equipment).
Separate the packaging elements and dispose of them in accordance with local regula-
tions.
B
A
Marking to identify the packaging material. A = Material code, B = Material number:
1-7 = Plastics, 20-22 = Paper and cardboard
1. Items included in the package ...........................3
1.1 Description ...................................................3
2. Important instructions
Retain for future use ..........................................4
3. Intended use .......................................................6
4. Operation ............................................................6
4.1 Safety ...........................................................6
4.2 Initial use ......................................................6
4.3 Additional information for HK 58 Cosy .........6
4.4 Switching on .................................................6
4.5 Setting the temperature ................................6
4.6 Automatic switch-o ....................................7
4.7 Switching o .................................................7
5. Cleaning and maintenance .................................7
6. Storage ............................................................... 8
7. Disposal ..............................................................8
8. What if there are problems? ...............................8
9. Technical data ....................................................8
10. Guarantee / service .......................................... 8
Read these instructions for use carefully. Observe the warn-
ings and safety notes. Keep these instructions for use for fu-
ture reference. Make the instructions for use accessible to
other users. If the device is passed on, provide the instruc
-
tions for use to the next user as well.
3
Separate the product and packaging elements and dispose of them in accordance with
local regulations.
This product satisfies the requirements of the applicable European and national directives.
United Kingdom Conformity Assessed Mark
The products demonstrably meet the requirements of the technical Regulations of the
EAEU.
Manufacturer code for production data
The textiles used for this device meet the stringent human ecological requirements of
Oeko Tex Standard 100, as verified by Hohenstein Research Institute.
Wash at a maximum tempera-
ture of 30°C, Very gentle wash
Do not iron
Do not bleach
Do not dry-clean Do not dry in a tumble dryer
1. Items included in the package
Check that the exterior of the cardboard delivery packaging is intact and make sure that all contents are
present. Before use, ensure that there is no visible damage to the device or accessories and that all packag-
ing material has been removed. If you have any doubts, do not use the device and contact your retailer or
the specified Customer Service address.
1 Heat pad
1 Cover
1 Control
1 Instructions for use
1.1 Description
1. Power plug
2. Control
3. Sliding switch (ON = I / OFF = 0 )
4. Buttons for setting temperature
5. Illuminated display for temperature settings
6. Plug-in coupling
1
2
3
4
5
6
1
2
3
4
5
6
4
2. Important instructions
Retain for future use
WARNING
• Non-observance of the following notes may result in personal injury
or material damage (electric shock, skin burns, fire). The following
safety and hazard information is not only intended to protect your
health and the health of others, it should also protect the product.
For this reason, pay attention to these safety notes and include these
instructions when handing over the product to others.
• This heat pad must not be used by persons who are not sensitive to
heat or by other vulnerable persons who may not be able to react to
overheating (e.g. diabetics, people with skin alterations due to illness
or scarred tissue in the application area, after taking pain relief medi
-
cation or alcohol).
• This heat pad must not be used by very young children (0-3 years
old) as they are unable to respond to overheating.
• The heat pad can be used by children older than 3 and younger than
8 years of age provided they are supervised. For this, the control
must always be set to the minimum temperature.
• This heat pad may be used by children over the age of 8 and by peo
-
ple with reduced physical, sensory or mental skills or a lack of expe-
rience or knowledge, provided that they are supervised or have been
instructed on how to use the heat pad safely, and are fully aware of
the consequent risks of use.
• Children must not play with the heat pad.
• Cleaning and user maintenance must not be performed by children
unless supervised.
• This heat pad is not designed for use in hospitals.
• This heat pad is only intended for domestic/private use, not for com
-
mercial use.
• Do not insert pins.
• Do not use folded or rucked.
• Do not use if wet.
• This heat pad may only be used in conjunction with the control
specified on the label.
• This heat pad must only be connected to the mains voltage that is
specified on the label.
•
If the heat pad is being used over several hours, we recommend that
you set the lowest temperature setting on the control to avoid the
body overheating and thereby any potential burns to the skin or heat
stroke.
5
• The electrical and magnetic fields emitted by this heat pad may inter-
fere with the function of a pacemaker. However, they are still well
below the limits: electrical field strength: max. 5000V/m, magnetic
field strength: max. 80A/m, magnetic flux density: max. 0.1 millite
-
sla. Please therefore consult your doctor and the manufacturer of
your pacemaker before using this heat pad.
• Do not pull, twist or make sharp bends in the cables.
• If the cable and control of the heat pad are not positioned properly,
there may be a risk of becoming entangled in, being strangled by,
tripping over, or stepping on the cable and control. The user must
ensure that excess lengths of cable, and cables in general, are safely
routed.
• Please check this heat pad frequently for signs of wear and tear
or damage. If any such signs are evident, if the heat pad has been
used incorrectly or if it no longer heats up, it must be checked by the
manufacturer before being switched on again.
• Under no circumstances should you open or repair the heat pad
(including the accessories) yourself because faultless functionality
can no longer be guaranteed thereafter. Failure to observe this will
invalidate the guarantee.
• If the mains connection cable of this heat pad is damaged, it must be
disposed of. If it cannot be removed, the heat pad must be disposed
of.
• Do not expose control and cables to direct sunlight.
• When this heat pad is switched on:
– Do not place any sharp objects on it
– Do not place any heat sources, such as hot water bottles, heat
pads or similar, on it
• The electronic components in the control warm up when the heat
pad is in use. For this reason, the control must never be covered or
placed on the heat pad when it is in use.
• Allow the heat pad to cool down before storing it away. Otherwise
the heat pad may get damaged.
• To avoid any creasing in the heat pad, do not place any objects on
top of it while it is being stored. Otherwise the heat pad may get
damaged.
• It is essential to observe the information relating to the following
chapters: Operation, Cleaning and maintenance, Storage.
• If you should have any questions about using our devices, please
contact our Customer Services department.
6
3. Intended use
CAUTION
This heat pad is only designed to warm up the human body.
4. Operation
4.1 Safety
CAUTION
• The heat pad is fitted with a SAFETY SYSTEM. This sensor technology provides protection against
overheating across the entire surface of the heat pad with an automatic switch-off in the event of a
fault. If the SAFETY SYSTEM has switched off the heat pad, the temperature settings are no longer
illuminated when switched on.
• Please note that for safety reasons, the heat pad can no longer be operated after a fault has oc
-
curred and must be sent to the specified service address.
• Do not connect the defective heat pad with another control of the same type. This would trigger a
permanent switch-off via the control’s safety system.
4.2 Initial use
CAUTION
Ensure that the heat pad will not bunch up or become folded during use.
• To operate the heat pad connect the control to the heat pad by
plugging in the connector.
• Then plug in the power plug into the mains outlet.
4.3 Additional information for HK 58 Cosy
The exclusive shape of this heat pad was developed specifically for use on
the back and neck. Position the heat pad on the back so that the hook and
loop fastener on the neck part is in line with your neck. Then close the hook
and loop fastener. Adjust the length of the abdominal belt so that you are
comfortable and fasten the buckle by fitting one end into the other.
To undo the buckle, push both sides of the clasp together as shown in the
image.
4.4 Switching on
Push the sliding switch (3) on the right side of the control to the setting “I” (ON) – see image of control. When
the switch is on, the temperature settings display is illuminated.
4.5 Setting the temperature
To increase the temperature, press the
button (4). To reduce the temperature, press the button (4).
Level 1: minimum heat
Level 2-5: individual heat setting
Level 6: maximum heat
NOTE:
The fastest way to warm up the heat pad is to initially set the highest temperature setting.
NOTE:
These heat pads have a fast heating function, which allows the pad to warm up faster in the first
10minutes.
la banda abdominal y aproxime los dos extremos conectores para
cerrarlos. Para separar los extremos conectores, apriete a la vez
Compruebe primero que el interruptor está conectado a la almo-
7
WARNING
If the heat pad is being used over several hours, we recommend that you set the lowest temperature
setting on the control to avoid overheating the heated body part, which may lead to burns to the skin.
4.6 Automatic switch-off
This heat pad is equipped with an automatic switch-off function. This turns off the heat supply
approx. 90 minutes after the initial use of the heat pad. A part of the displayed temperature
settings on the control then begins to flash. So that the heat pad can be switched back on, the
side sliding switch (3) must first be set to setting “0” (OFF). After about 5 seconds it is possible
to switch it on again.
4.7 Switching off
To switch the heat pad off, set the sliding switch (3) on the side of the control to setting “0” (OFF). The tem-
perature settings display is no longer illuminated.
NOTE:
If the heat pad is not in use, switch the side sliding switch (3) for ON/OFF to setting “0” (OFF) and
unplug the power plug from the socket. Then disconnect the control from the heat pad by unplugging
the plug-in coupling.
5. Cleaning and maintenance
WARNING
Before cleaning, always remove the power plug from the socket first. Then disconnect the control from
the heat pad by unplugging the plug-in coupling. Otherwise there is a risk of electric shock.
CAUTION
The control must never come into contact with water or other liquids, as this may cause damage.
• To clean the control, use a dry, lint-free cloth. Do not use any chemical or abrasive cleaning agents.
• The textile cover can be cleaned in accordance with the symbols on the label and must be removed from
the heat pad prior to cleaning.
• Small marks on the heat pad can be removed with a damp cloth and if necessary, with a little liquid de
-
tergent for delicate laundry.
CAUTION
Please note that the heat pad may not be chemically cleaned, wrung out, tumble dried, put through
a mangle or ironed. Otherwise the heat pad may be damaged.
• This heat pad is machine-washable.
• Set the washing machine to a particularly gentle wash cycle at 30 °C (wool cycle). Use a delicate laundry
detergent and measure it out according to the manufacturer’s instructions.
CAUTION
Please note that frequent washing of the heat pad has a negative effect on the product. The heat pad
should therefore be washed in a washing machine a maximum of 10 times during its life.
•
Immediately after washing, reshape the heat pad to its original dimensions while it is still damp and spread
it out flat on a clothes horse to dry.
90 min
STOP
8
CAUTION
•
Do not use pegs or similar items to attach the heat pad to the clothes horse. Otherwise the heat
pad may be damaged.
• Do not reconnect the control to the heat pad until the plug-in connection and the heat pad are
completely dry. Otherwise the heat pad may be damaged.
WARNING
Never switch the heat pad on to dry it! Otherwise there is a risk of electric shock.
6. Storage
If you do not plan to use the heat pad for a long period of time, we recommend that you store it in the
original packaging. For this purpose, disconnect the control from the heat pad by unplugging the
plug-in coupling.
7. Disposal
For environmental reasons, do not dispose of the device in the household waste at the end of
its useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the
device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If
you have any questions, please contact the local authorities responsible for waste disposal.
8. What if there are problems?
Problem Cause Solution
The temperature settings are not illuminated while
- the control is properly connected to the heat pad
- the power plug is connected to a working socket
- the side sliding switch on the control is set to setting
“I” (ON)
The safety system has
switched the heat pad
off permanently.
Send the heat pad
and the control for
servicing.
9. Technical data
See the rating label on the heat pad.
10. Guarantee / service
Further information on the guarantee and guarantee conditions can be found in the guarantee leaflet
supplied.
Subject to errors and changes
07.101.315_HK58-115-125_2024-02-05_01_IM2_BEU_EN
Beurer GmbH
•
Söflinger Str. 218
•
89077 Ulm, Germany
•
www.beurer.com
www.beurer-gesundheitsratgeber.com
•
www.beurer-healthguide.com
UK-Importer: Beurer UK Ltd.
Suite 16
•
Stonecross Place
•
Stonecross Lane North
•
WA3 2SH Lowton
•
United Kingdom
