1
2
3
4
5
6
7
2
2
4
4
1
1
2
1
Assembly Instructions for Mobile Workstation
Thanks for choosing our product. This stand ideally works as mobile podium, lectern and laptop workstation. The height of
stand can be easily adjusted. The integrated wheels provide ease of movement.
Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation,
please call a qualied contractor. Check carefully to make sure there are no missing or defective parts. Never use defective
parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not
explicitly specied in this manual. We can not be liable for damage or injury caused by incorrect mounting, incorrect
assembly, or incorrect use.
Required Tools: Phillips screw driver.
Supplied Parts
Long Square Tube
Short Square Tube
Pole Set
Tube Connector
Tube Connector Cover
No. Picture Description Quantity
Front
Back
Wheel & Washer
M6 Socket Plate
hole for
connecting
the Pole Set(7)
MWS-001BK
1
4
2
1
Connecting Tube
Plastic Sleeve
Soft Pad
Top Plate
No. Picture Description Quantity
2
10
12
8
9
11
13
14
15
16
18
17
Plastic Knob
Left Connecting Plate
2
1
4
M6 Nut
Right Connecting Plate
Shelf
1
1
Lever
2
Shelf Support
2
No. Picture Description Quantity
3
19
20
8
12
M6x10 Allen Head Bolt
M6x60 Allen Head Bolt
M5x6 Grub Screw
M4X6 Countersink Bolt
2
4
21
22
23 2
M6 Washer
Tool Kit
24 1
2
4
3
4
5-1 5-2
5-3
Turn this nut to adjust the height of wheel.
Important: Short square tube(2) should be on the same
side as the screw hole for Pole Set (7).
Adding plastic sleeves to
prevent pulling out the inner
poles from outer poles.
These holes are used
for connecting the
shelf(12), facing them
to the Long Square
Tube(1).
1
Use Tool kit(24)
Use Tool kit(24)
Use Tool kit(24)
Use Tool kit(24)
3
1
Use Tool kit(24)
3
7
5
8
9
20
2
6
19
4
20
22
Front
Back
hole for
connecting
the Pole Set(7)
3.1
3.2 3.3
Left
Right
5
7
8 9
10
Use Tool kit(24)
6
10
12
21
11
20
Use Tool kit(24)
Use Tool kit(24)
13
20
16
15
14
6
11
12 14
13
Adding the Soft
Pad(18) optionally.
17
23
tilt 40°
18
