This product contains a light source of energy eciency class <F>', where <F> shall be replaced by
the energy eciency class of the contained light source.
TECHNICAL DATA
CCT CHANGING
WITH REMOTE CONTROL
INSTRUCTION MANUAL
LED DOME LIGHT
MODEL
SKU
WATTS
LUMENS
BEAM ANGLE
LIFE SPAN
ON/OFF CYCLE
CRI
COLOR
TEMPERATURE
INPUT VOLTAGE
OPERATION
TEMPERATURE
IP RATING
MATERIAL
DIMENSION
120°
20,000 Hours
>15,000 Times
>80
AC: 220-240V, 50/60Hz
VT-85030 VT-85036 VT-85031 VT-85045 VT-85033 VT-85035
3000K-6500K (Changeable)
Plastic
IP20
-20°C to +45°C
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
60W(4000K)
30W (3000-6500K)
24194,24195 24196
24197,24198,24199 24201
24202,24203,24204
40W (4000K)
20W (3000-6500K)
4000 Lm (40W)
24200
VT-85034
24206,24205
495x67.6mm 491x80.1mm
480x57.6mm
493x67.6mm
495x72.2mm 391x63.6mm486x67.1mm
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
6000 Lm (60W)
@SPHERE360°
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before
starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or
local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid
for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and
tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The
products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is
warranted for manufacturing defects only.
ATTENTION! Do not look directly at LED light beam. Product can only be supplied by rated voltage or voltage within
the range provided. It's forbidden to use the product with damaged protective cover. Product must not be used in unfa-
vorable conditions, e.g. dust, water, moisture, vibrations, explosive air atmosphere, fumes, or chemical fumes, etc. In the
area of strong electromagnetic interference, the functioning of the product may be disrupted.
• Please make sure to turn o the power before starting the installation.
• Installation must be performed by a certified person.
• The light source contained in this luminaire shall only be replaced by the manufacturer or his
service agent or a similar qualified person.
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced
by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
• Method of attachment of the cable or cord such that any replacement can only be made by the
manufacturer, his service agent or similar qualifed person.
• Proper grounding should be ensured throughout the installation.
• For Indoor use only
Caution, risk of electric shock.
This marking indicates that this
product should not be disposed
of with other household wastes.
Replaceable light source
by a professional
LED
LED
6500K
6500K
3000K
3000K 4000K
Turn up the Lumens
Night light Mode
MAX 5M
+10 30
60 90
Delete
Timing delay
+ 10 minutes
Until 240 minutes
Cancel the Timing
Timing 60 minutes
Timing 30 minutes
Timing 90 minutes
Turn down the Lumens
REMOTE CONTROLLER INSTRUCTIONS
INTRODUCTION & WARRANTY
WARNING
Any maintenance work must be performed when the power supply is cut o and the product has cooled
down. Clean only with so and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure
free air access. Product may heat up to a higher temperature. Product designed with non-replaceable light
source of the LED type. Product cannot be fixed if the light source becomes damaged. Remote control works
on 2xAAA battery (not included).
• Switch O the Power Before Starting the Installation.
• Twist and remove the cover (Ref Image Part 2)
• Drill a hole in the ceiling to fix the light using screws (Ref Image Part 3)
• Connect the wires (Ref Image Part 4) before fixing the light using screws on the ceiling.
• Twist and lock the cover to the light (Ref Image Part 5)
• Switch ON the power and test the light.
INSTALLATION DIAGRAM
Read the manual before mounting. Mounting should be performed by a qualified electrician. Exercise cau-
tion. Product has a protective contact /terminal. Failure to connect the protective lead may lead to electric
shock. Mounting diagram: see pictures. Check for proper mechanical fastening and connection to electrical
power prior to first use.
L
USAGE GUIDELINES / MAINTENANCE
MOUNTING
INSTALLATION INSTRUCTION
REMOTE CONTROL SAFETY INSTRUCTIONS
• Before using this product, make sure that all parts are configured correctly according to the instructions in the
attached instruction.
• The product should not be used by persons under 5 years of age without supervision by a parent or guardian.
• Ensure that the power batteries are configured correctly and have the appropriate parameters as specified by
the manufacturer.
L
DISMANTLING INSTRUCTIONS
(For Market surveillance team only)
Note: Light source removal will void the warranty
V-TAC UK LTD. IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT PLEASE REACH OUT TO US AT
SUPPORT@VTACEXPORTS.COM V-TAC, 5A TUNGSTEN PARK, DOWNS ROAD, WITNEY, OXFORDSHIRE, OX29 0AX
V-TAC WEST EUROPE LTD. IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US
AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC WEST EUROPE LTD. GROUND FLOOR, 71 LOWER BAGGOT STREET, DUBLIN 02, IRELAND DO2 P593
