Refrigerator
User Manual
BLS4682
48 3898 0003/ EN/ AP/ 04.11.25 09:42
7260442210
EN
EN / 2
Please read these instructions first before using your appliance
Thank you for choosing a Beko appliance.
Please take some time to read this user manual before using your appliance, to ensure you
know how to safely operate the controls and functions.
Carefully follow all unpacking and installation instructions to ensure the appliance is cor-
rectly connected and fitted prior to use.
Please write your product model and serial number on the last page of this user manual,
and store in a safe location close to the appliance for easy future reference.
This user manual may also be applicable for several other models. Differences between
models will be listed.
If you have any questions or concerns, please call our Customer Service Team or find help
and information online at www.beko.co.uk
Hazard that may result in death or injury.
Read the user manual.
The model information as stored in the product data
base can be reached by entering following website and
searching for your model identifier (*) found on energy la-
bel.
https://eprel.ec.europa.eu/
EN / 3
Table of Contents
1 Safety Instructions......................... 4
1.1 Important Safety Symbols ............ 4
1.2 Intention of Use ............................. 4
1.3 Safety of Children, Vulnerable
Persons and Pets ..........................
5
1.4 Electrical Safety............................. 5
1.5 Handling Safety ............................. 6
1.6 Installation Safety.......................... 6
1.7 Operational Safety......................... 9
1.8 Food Storage Safety...................... 12
1.9 Maintenance and Cleaning Safety 13
1.10 Lighting .......................................... 13
1.11 Disposal of the Old Product.......... 13
2 Environmental Instructions ............ 14
2.1 Compliance with the WEEE Dir-
ective and Disposing of the
Waste Product ...............................
14
3 Your Refrigerator ........................... 15
4 Installation..................................... 15
4.1 Right Place For Installation........... 15
4.2 Adjusting the Legs......................... 16
4.3 Hot Surface Warning..................... 16
5 Preparation.................................... 16
5.1 What To Do For Energy Saving ..... 16
5.2 First Use ......................................... 16
5.3 Climate Class and Definitions ...... 17
6 Operating the Product.................... 17
7 Use of Your Appliance.................... 17
7.1 Setting the Operating Temperat-
ure...................................................
17
7.2 Placing Your Refrigerator Under
the Countertop and Adjusting the
Feet.................................................
18
7.3 Reversing the Door Opening Side. 19
7.4 Replacing the Illumination Lamp.. 19
8 Maintenance and Cleaning ............. 19
9 Troubleshooting............................. 20
EN
EN / 4
1 Safety Instructions
• This section includes the
safety instructions necessary
to prevent the risk of personal
injury or material damage.
• Our company shall not be held
responsible for damages that
may occur if these instructions
are not observed.
• Always have installation and
repair operations performed by
manufacturer, authorized ser-
vice or a person who will be
described by importer com-
pany.
• Use original spare parts and
accessories only.
• Do not repair or replace any
component of the product un-
less it is clearly specified in the
user manual.
• Do not perform any modifica-
tions on the product.
1.1 Important Safety
Symbols
Risk of electric shock!
Read the user manual.
Danger that may result in
burns due to contact with hot
surfaces.
Combustible material, warn-
ing against fire hazard.
Risk of injury due to contact
with sharp surfaces!
Risk of UV-C radiation
1.2 Intention of Use
• This product is not suitable for
commercial use and should
not be used for a purpose
other than its intended use.
• This product is intended for
operating interiors, such as
households or similar.
For example;
In the staff kitchens of the
stores, offices and other work-
ing environments,
In farm houses,
In the units of hotels, motels or
other resting facilities that are
used by the customers,
In hostels, or similar environ-
ments,
In catering services and similar
non-retail applications.
• This product shall not be used
in open or enclosed external
environments such as vessels,
camper vans, balconies or ter-
races. Exposing the product to
rain, snow, sunlight and wind
may cause risk of fire.
EN
EN / 5
1.3 Safety of Children,
Vulnerable Persons
and Pets
• This product may be used by
children aged 8 years and
older and persons with under-
developed physical, sensory or
mental capabilities or lack of
experience and knowledge if
they are being supervised or
have been given instruction
concerning use of the appli-
ance in a safe way and the
hazards involved.
• Children between 3 and 8
years are allowed to put and
take out food into/from the
cooler product.
• Children and pets must not
play with, climb on, or get in-
side the product.
• Children and pets must be kept
away from the cabin area
(compressor) where electrical
parts are located.
• Cleaning and user mainten-
ance must not be performed
by children unless there is
someone overseeing them.
• Keep the packaging materials
away from children. Risk of in-
jury and suffocation.
• If there is a lock available on
the product’s door, keep the
key out of children's reach.
1.4 Electrical Safety
• The product shall not be
plugged into the outlet during
installation, maintenance,
cleaning, repair, and transport-
ation operations.
• If the power cable is damaged,
it must be replaced by the per-
son sent by the manufacturer,
authorized service provider or
the importer to prevent any po-
tential danger.
• Do not tuck the power cable
under the product or to the
rear of the product. Do not put
heavy items on the power
cable. The power cable should
not be bent, crushed, and
come into contact with any
heat source.
• Use an original cable only. Do
not use cut or damaged
cables.
• Do not use an extension cord,
multi-plug or adaptor to oper-
ate your product.
• Portable multi-plugs or port-
able power supplies may over-
heat and cause fire. Thus, do
not have a multi-plug, portable
power sources behind or in the
vicinity of the product.
EN
EN / 6
• Before plugging the product
into the power source, please
remove the power cable from
the condenser hook (if avail-
able) during the installation.
• The user should not be able to
reach the electrical parts after
installation.
• Do not plug the product’s
power cord in a loose or dam-
aged power outlet. These
types of connections may
overheat and cause fire.
• The plug shall be easily ac-
cessible. If this is not possible,
a mechanism that meets the
electrical legislation and that
disconnects all terminals from
the mains (fuse, switch, main
switch, etc.) shall be available
on the electrical installation.
• The product must not be oper-
ated with an external switching
device such as a timer, or a re-
mote controlled system.
• Do not use the product when
your feet are bare or your body
is wet.
• Do not touch the plug with wet
hands.
• When unplugging the appli-
ance, don’t hold the power
cable, but the plug.
• Make sure that the plug is not
wet, dirty or dusty.
• Do not ever connect your
product to power saving
devices. These systems are
harmful for the product.
1.5 Handling Safety
• Make sure to unplug the appli-
ance before carrying the
product.
• This product is heavy, do not
handle it by yourself. Injuries
may occur if the product falls
on you. Do not bump into
places or drop the product
while transporting it.
• Always close the doors and do
not hold the product by its
doors while transporting it.
• Be careful not to damage the
cooling system and the pipes
while handling the product. Do
not operate the product if the
pipes are damaged, and con-
tact an authorized service.
1.6 Installation Safety
• To prepare the product for use,
see the information in the user
and installation manual and
make sure the electric and wa-
ter utilities are as required. If
not, call a qualified electrician
and plumber to arrange the
utilities as necessary.
• Failure to do so may result in
electric shock, fire, problems
with the product, or injury.
EN
EN / 7
• Before starting the installation,
switch off the fuse to de-ener-
gise the power line to which
the product is connected.
• The product should be in-
stalled by two or more people.
Use protective gloves while re-
moving the product from the
packaging and installation.
• This product is designed for
use at a maximum altitude of
2000 metres above sea level.
• Keep children away from in-
stallation area.
• Check for any damage on the
product before installing it. Do
not have the product installed
if it is damaged.
• Always use personal protective
equipment (gloves, etc.) during
product installation, mainten-
ance and repair. Risk of injury.
• Do not install or leave the
product in places where it may
be exposed to external ambi-
ent temperatures.
• Place the product on a clean,
level and hard surface and bal-
ance it with the adjustable legs
(by rotating the front feet to
the right or left). Otherwise, the
refrigerator may tip over and
cause injuries.
• Proceed with care to prevent
causing any damage to the
floors (tiling etc.) while moving
the product. Install the product
on a floor, or provide sufficient
support depending on the size,
weight and the use-case of the
product. Ensure that the
product is not near a heat
source, and all four feet are
stable and leaning against the
floor. Install the product as ne-
cessary, and ensure that it is
horizontal, using a bubble
level. To ensure the complete
efficiency of the refrigerant cir-
cuit, wait for at least two hours
before operating the product.
• The product shall be installed
in a dry and ventilated environ-
ment. Do not keep carpets,
rugs or similar covers under
the product. This may cause
risk of fire as a result of inad-
equate ventilation!
• Do not block or cover ventila-
tion holes. Otherwise, power
consumption increases and
your product may be damaged.
• Leave sufficient space by the
sides and above to ensure ad-
equate ventilation. The gap
between the back panel and
the wall behind the product
must be a minimum of 50mm
in order to prevent hot sur-
faces. Reducing this distance
may increase the energy con-
sumption of product.
EN
EN / 8
• When placing the product,
make sure that the supply
cable is not damaged or
pinched.
• The product must not be con-
nected to supply systems and
power sources which may
cause sudden voltage changes
(i.e. a portable solar-energy
power source). Otherwise,
damage to your product may
occur as a result of the abrupt
voltage fluctuations!
• The more refrigerant a refriger-
ator contains, the bigger its in-
stallation room shall be. In very
small rooms, a flammable gas-
air mixture may occur in case
of a gas leak in the cooling
system. At least 1 m³ of
volume is required for each 8
grams of refrigerant. The
amount of the refrigerant avail-
able in your product is spe-
cified in the Type Label.
• The product must never be
placed in such a way that
power cables, the metal hose
of the gas stove, metal gas or
water pipes come into contact
with the product's rear wall (or
the condenser).
• The installation place of the
product must not be exposed
to direct sunlight and it shall
not be in the vicinity of a heat
source such as stoves, radiat-
ors, etc. If you cannot prevent
installation of the product in
the vicinity of a heat source,
use a suitable insulation plate
and make sure the minimum
distance to the heat source is
as specified below:
– At least 30 cm away from
heat sources such as stoves,
ovens, heating units and
heaters, etc.,
– And at least 5 cm away from
electrical ovens.
• Your product has the protec-
tion class of I.
• Plug the product in a grounded
socket that conforms with the
Voltage, Current and Fre-
quency values specified in the
type label. The socket must
have a 10A – 16A fuse. Our
firm will not assume respons-
ibility for any damages due to
usage without earthing and
without power connection in
compliance with local and na-
tional regulations.
• The product’s power cable
must be unplugged during in-
stallation. Otherwise, risk of
electric shock and injury may
occur!
• Do not plug the product to
loose, broken, dirty, greasy
sockets or sockets that have
come out of their seats or
sockets with a risk of water
EN
EN / 9
contact. These types of con-
nections may overheat and
cause fire..
• Place the power cable and
hoses (if any) of the product
so that they shall not cause a
risk of tripping over.
• Penetration of humidity and li-
quid to live parts or to the
power cord may cause short
circuit. Thus, do not use the
product in humid environ-
ments or in areas where water
may splash (e.g. garage, laun-
dry room, etc.) If the refriger-
ator is wet by water, unplug it
and contact an authorized ser-
vice.
• Do not ever connect your refri-
gerator to power saving
devices. These systems are
harmful for the product.
• There is a risk of contact with
electrical parts when removing
the electronic board cover and
the compressor rear cover (if
fitted). Do not remove the elec-
tronic board cover and the
compressor rear cover (if fit-
ted). There is a risk of electro-
cution!
1.7 Operational Safety
• Do not ever use chemical
solvents on the product. These
materials contain an explosion
risk.
• In case of a failure of the
product, unplug it (or de-ener-
gise the fuse to which it is con-
nected), and do not operate
until it is repaired by the au-
thorized service. There is a risk
of electric shock!
• Do not place flames (lighted
candle, cigarette, etc.) or heat
sources (iron, hob, oven, etc.)
on or near the product. Do not
place flammable/explosive
materials near the product...
• Do not get on the product. Risk
of falling and injury!
• Do not cause damage to the
pipes of the cooling system us-
ing sharp and piercing tools.
The refrigerant that sprays out
in case of puncturing the gas
pipes, pipe extensions or upper
surface coatings may cause ir-
ritation of skin and injury to the
eyes.
• Do not intervene in or damage
the coolant circuit Risk of ex-
plosion.
• Do not place and operate elec-
trical appliances inside the re-
frigerator/freezer unless it is
advised by the manufacturer.
• Do not use any procedures
other than those recommen-
ded by the manufacturer to
speed up defrosting.
EN
EN / 10
• Take due care not to jam any
parts of your hands or your
body to the moving parts in-
side the product. Be careful to
prevent jamming of your fin-
gers between the refrigerator
and its door. Be careful while
opening or closing the door if
there are children around.
• Do not put ice cream, ice
cubes or frozen food to your
mouth as soon as you take
them out of the freezer. Risk of
frostbite!
• Do not touch the inner walls,
metal parts of the freezer or
food kept inside the freezer
with wet hands. Risk of frost-
bite!
• Do not place soda cans or
cans and bottles that contain
fluids that may be frozen to the
freezer compartment. Cans or
bottles may explode. Risk of
injury and material damage!
• Do not use or place materials
sensitive against temperature
such as flammable sprays,
flammable objects, dry ice or
other chemical agents in the
vicinity of the refrigerator. Risk
of fire and explosion!
• Do not store explosive materi-
als such as aerosol cans with
flammable materials inside the
product.
• Do not place cans containing
fluids over the product an open
state. Splashing of water on an
electrical part may cause an
electric shock or a fire.
• Due to risk of breaking, do not
store glass containers with li-
quid inside in the freezer com-
partment.
• This product is not intended
for storage and cooling of
medicines, blood plasma,
laboratory preparations or sim-
ilar materials and products
that are subject to the Medical
Products Directive.
• If the product is used against
its intended purpose, it may
cause damage to or deteriora-
tion of the products stored in-
side.
• If your refrigerator is equipped
with blue light, do not look at
this light with optical devices.
Do not stare directly at UV LED
light for a long time. Ultraviolet
rays may cause eye strain.
• Do not fill the product with
more contents than its capa-
city. Do not use any proced-
ures other than those recom-
mended by the manufacturer
to speed up defrosting. Injuries
or damages may occur if the
contents of the refrigerator fall
when the door is opened. Sim-
EN
EN / 11
ilar problems may also occur
when an object is placed over
the product.
• Ensure that you have removed
any ice or water that may have
fallen to the floor to prevent in-
juries.
• Change the locations of the
racks/bottle racks on the door
of your refrigerator only when
the racks are empty. Danger of
injury!
• Do not place objects that may
fall/tip over on the product.
These objects may fall while
opening or closing the door
and cause injuries and/or ma-
terial damages.
• Do not hit or exert excessive
pressure on glass surfaces.
Broken glass may cause injur-
ies and/or material damages.
• For products designed to use
an air filter inside an access-
ible fan cover, the filter must
always be in position when the
refrigerator is in function.
• Do not block out the fan (if
available) with food.
• Damaged gaskets should be
replaced as soon as possible.
• Your product may have special
compartments (Fresh Food
Compartment, Zero Degrees
Compartment etc.) Unless oth-
erwise stated in the relevant
manual of the product, these
compartments can be re-
moved, and the product can be
used with the same perform-
ance.
• The cooling system in your
product contains R600a refri-
gerant. The refrigerant type
used in the product is spe-
cified in the type label. This
gas is flammable. Therefore,
be careful not to damage the
cooling system and the pipes
while operating the product. In
case of damage to the pipes;
1. Do not touch the product or
the power cable.
2. Keep the product away from
potential sources of fire that
may cause the product to
catch fire.
3. Ventilate the area where the
product is placed. Do not use
a fan.
4. Contact Authorized Service.
Before disposing of old products
that shall not be used any more:
1. Unplug the power cord from
the mains socket.
2. Cut the power cable and re-
move it from the appliance
together with the plug.
3. Do not remove the racks and
drawers from the product to
prevent children from getting
inside the appliance.
4. Remove the doors.
EN
EN / 12
5. Store the product so that it
shall not be tipped over.
6. Do not allow children to play
with the scrapped product.
7. If the product is damaged
and you observe gas leak,
please stay away from the
gas. Gas may cause frostbite
if it contacts your skin.
• Do not dispose of the product
by throwing it into fire. Risk of
explosion.
• If there is a lock available on
the product’s door, keep the
key out of children's reach.
1.8 Food Storage
Safety
Please pay attention to the fol-
lowing warnings to avoid food
spoilage:
• Leaving the doors open for a
long time may cause the tem-
perature inside the product to
rise.
• Regularly clean the accessible
drainage systems in contact
with food.
• Clean the water tanks that
have not been used for 48
hours and mains-fed water
systems that have not been
used for more than 5 days.
• Store raw meat and fish
products in appropriate com-
partments within the product.
Thus, it does not drip on or
come into contact with other
foods.
• Two-star freezer compart-
ments are used for storing pre-
filled foods, making and stor-
ing ice and ice cream.
• One, two and three-star com-
partments are not appropriate
for freezing fresh food.
• If the cooling product has been
left empty for a long time, turn
off the product, defrost, clean,
and dry the product in order to
protect the housing of the
product.
• After the foods are placed,
check if the compartment
hatches, and especially the
freezer door, are properly
closed.
• Use the refrigerator compart-
ment for storing fresh foods,
and the freezer compartment
for storing frozen goods, freez-
ing fresh foods and preparing
ice cubes.
• Do not store foods without
properly sealing them in the re-
frigerator and the freezer com-
partments, to prevent direct
contact with the inner sur-
faces.
EN
EN / 13
1.9 Maintenance and
Cleaning Safety
• Unplug the refrigerator or de-
energise the fuse before clean-
ing it or starting to perform
maintenance.
• Do not pull by the door or door
handle if you are going to
move the product for cleaning
purposes. The door may cause
injuries if the handle is pulled
too hard.
• Do not place hands, feet or
metal objects under or behind
your product. Jamming may
occur or any sharp edge may
cause personal injuries.
• Do not wash the inside or out-
side of the product with a pres-
sure washer, steam, spray wa-
ter or pouring water. Risk of
electric shock and fire.
• When cleaning the product, do
not use sharp and abrasive
tools or household cleaning
agents, detergent, gas, gasol-
ine, thinner, alcohol, varnish,
and similar substances. Use
only cleaning and maintenance
agents that are not harmful for
food inside the product.
• Do not use paper towels, kit-
chen sponges or other hard
cleaning materials.
• Do not ever use steam or
steamed cleaning materials for
cleaning the product and thaw-
ing the ice inside it. Steam con-
tacts the live areas in your re-
frigerator and causes short cir-
cuit or electric shock.
• Do not use any mechanical
tools or any other tools than
the recommendations of the
manufacturer to speed up the
thawing operation.
• Take care to keep water away
from the ventilation holes,
electronic circuits or lighting of
the product. Otherwise, risk of
fire or electric shock may oc-
cur.
• Use a clean, dry cloth to wipe
the dust or foreign material on
the tips of the plugs. Do not
use a wet or damp piece of
cloth to clean the plug. Other-
wise, risk of fire or electric
shock may occur.
1.10 Lighting
Contact an authorized service
when you shall replace the LED /
bulb using for lighting.
1.11 Disposal of the Old
Product
When disposing of your old
product follow the instructions
below:
• To prevent children from acci-
dentally locking themselves
into the product, if there is
door lock, disable it.
EN
EN / 14
• Splash of coolant is harmful to
the eyes. Do not damage any
part of the cooling system
while disposing of the product.
• It may be fatal if the com-
pressor oil is swallowed or if it
penetrates the respiratory
tract.
• Cooling system of your
product includes R600a gas as
specified in the type label. This
gas is flammable. Do not dis-
pose of the product by throw-
ing it into fire. Risk of explo-
sion!
• C -Pentane is used as a blow-
ing agent in insulation foam
and it is a flammable sub-
stance. Do not dispose of the
product by throwing it into fire.
2 Environmental Instructions
2.1 Compliance with the WEEE Dir-
ective and Disposing of the
Waste Product
This product complies with EU
WEEE Directive (2012/19/EU).
This product bears a classifica-
tion symbol for waste electrical
and electronic equipment
(WEEE).
This symbol indicates that this product
shall not be disposed with other household
wastes at the end of its service life. Used
device must be returned to offical collec-
tion point for recycling of electrical and
electronic devices. To find these collection
systems please contact to your local au-
thorities or retailer where the product was
puchased. Each household performs im-
portant role in recovering and recycling of
old appliance. Appropriate disposal of used
appliance helps prevent potential negative
consequences for the environment and hu-
man health.
Compliance with RoHS Directive
The product you have purchased complies
with EU RoHS Directive (2011/65/EU). It
does not contain harmful and prohibited
materials specified in the Directive.
Package information
Packaging materials of the product
are manufactured from recyclable
materials in accordance with our
National Environment Regulations.
Do not dispose of the packaging
materials together with the do-
mestic or other wastes. Take them
to the packaging material collection
points designated by the local au-
thorities.
Conformity with standards and
test information / Declaration of EC
conformity
Development, manufacture and
sales stages of this product con-
form to the safety rules in all relev-
ant guidelines of the European
Community. 2014/35/EU, 2014/30/
EU, 93/68/EC, IEC 60436/DIN
44990, EN 50242
EN
EN / 15
3 Your Refrigerator
1
2
3
4
5
6
7
8
9
*
1 Egg holder 2 Door Shelf
3 * Storage Box 4 Bottle Shelf
5 Adjustable Legs 6 Food Storage Compartment
7 Sliding Crisper Cover 8 Body Shelves
9 Lamp Thermostat Box
*Optional: Figures in this user manual are
schematic and may not exactly match your
product. If your product does not comprise
the relevant parts, the information pertains
to other models.
4 Installation
Read the “Safety Instructions” first!
4.1 Right Place For Installation
Contact the Authorized Service for the
product's installation. To prepare the
product for installation, see the information
in the user manual and make sure the elec-
tric and water utilities are as required. If
not, call an electrician and plumber to ar-
range the utilities as necessary.
• Place the product on a flat surface to
avoid vibration
• Place the product at least 30 cm away
from the heater, stove and similar
sources of heat and at least 5 cm away
from electric ovens.
• When placing two coolers in adjacent po-
sition, leave at least 4 cm distance
between the two units.
• Keep the product out of direct sunlight
and in a dry place.
• Your product requires adequate air circu-
lation to function efficiently. If you place
the product in an alcove, remember to
EN
EN / 16
leave at least 5 cm clearance between
the product and the ceiling, rear wall and
the side walls.
• Check if the rear wall clearance protec-
tion component is present at its location
(if provided with the product).
• If the component is not available, or if it
is lost or fallen, position the product so
that at least 5 cm clearance shall be left
between the rear surface of the product
and the wall of the room. The clearance
at the rear is important for efficient oper-
ation of the product.
4.2 Adjusting the Legs
If the product is not in balanced position,
adjust the front adjustable legs by rotating
them to right or left.
4.3 Hot Surface Warning
The side walls of your product are equipped
with cooler pipes to enhance the cooling
system. High pressure fluid may flow
through these surfaces, and cause hot sur-
faces on the side walls. This is normal and
it does not require servicing.
5 Preparation
Read the “Safety Instructions” first!
5.1 What To Do For Energy Saving
• This refrigerating appliance is not inten-
ded to be used as a built in appliance.
• When loading the food, leave enough
space inside the refrigerator to allow suf-
ficient air circulation for cooling.
• Since hot and humid air will not directly
penetrate into your product when the
doors are not opened, your product will
optimize itself in conditions sufficient to
protect your food. Under these circum-
stances, functions and components such
as compressor, fan, heater, defrost, light-
ing, display and so on will operate ac-
cording to the needs by consuming min-
imum energy.
• In case that multiple options are present,
glass shelves must be placed so that the
air outlets at the rear wall are not blocked
and preferably, in a way that air outlets
remain below the glass shelf. This com-
bination may help improving air distribu-
tion and energy efficiency.
• Store food in the cooler or chill compart-
ment according to proper storage condi-
tions to save energy.
5.2 First Use
Before using your product make sure the
necessary preparations are made in line
with the instructions in "Safety Instructions"
and "Installation" sections.
• Wait for at least 2 hours before operating
the product, to ensure the complete effi-
ciency of refrigeration.
• Keep the product running without placing
any food inside for 6 hours and the
product door should be kept as closed as
possible.
• The temperature change caused by open-
ing and closing of the door while using
the product may normally lead to con-
densation on door/body shelves and
glassware placed in the product.
• A sound will be heard when the com-
pressor is engaged. It is normal for the
product to make noise even if the com-
pressor is not running, as fluid and gas
may be compressed in the cooling sys-
tem.
• It is normal for the front edges of the
product to be warm. These areas are de-
signed to warm up in order to prevent
condensation
EN
EN / 17
• For some models, indicator panel turns
off automatically 1 minute after the door
closes. It will be reactivated when the
door is opened or any button is pressed.
5.3 Climate Class and Definitions
Please refer to the Climate Class on the rat-
ing plate of your device. One of the follow-
ing information is applicable to your device
according to the Climate Class.
• SN: Long Term Temperate Climate: This
cooling device is designed for use at am-
bient temperatures between 10 °C and 32
°C.
• N: Temperate Climate: This cooling
device is designed for use at ambient
temperatures between 16°C and 32 °C.
• ST: Subtropical Climate: This cooling
device is designed for use at ambient
temperatures between 16°C and 38°C.
• T: Tropical Climate: This cooling device
is designed for use at ambient temperat-
ures between 16°C and 43°C.
6 Operating the Product
Read the “Safety Instructions” first!
• The product shall be used for storing
food only.
• Turn off the water valve if you will be
away from home (e.g. at vacation) and
you will not be using the Icematic or the
water dispenser for a long period of time.
Otherwise, water leaks may occur.
Unplugging the Product
• Remove the food to prevent odours,
• Wait for the ice to melt, clean the interior
and let it dry, leave the doors open to
avoid damaging the inner body plastics.
7 Use of Your Appliance
7.1 Setting the Operating Temperat-
ure
The operating temperature is set by the
temperature control.
1=Lowest cooling setting (Warmest set-
ting)
5=Highest cooling setting (Coldest set-
ting)
or
Min. = Lowest cooling setting
(Warmest setting)
Max. = Highest cooling setting
(Coldest setting)
The average temperature inside the cooler
compartment should be around +5°C.
Please select a setting based on the de-
sired temperature.
Please note that there will be different tem-
peratures in the cooling area.
The coldest zone is just above the crisper.
The internal temperature also depends on
the ambient temperature, the frequency
with which the door is opened and the
amount of food stored inside.
Frequent opening of the door causes the in-
ternal temperature to rise.
It is therefore recommended to close the
door as soon as possible after use.
Use of interior compartments
Movable shelves: The distance between the
shelves can be adjusted as required.
EN
EN / 18
Vegetable drawer: In this compartment, ve-
getables and fruit can be stored for a long
time without spoiling.
Bottle shelf: Bottles, jars and cans can be
placed on these shelves.
Food storage
The refrigerator compartment is intended
for short-term storage of fresh food and
drinks.
Store dairy products in the designated com-
partment of the refrigerator.
Bottles can be stored in the bottle holder or
on the bottle shelf in the door.
Raw meat is best stored in a polyethylene
bag in the lowest compartment of the refri-
gerator.
Allow hot food and drinks to cool to room
temperature before placing them in the re-
frigerator.
• Caution:
Store concentrated alcohol only upright and
tightly closed.
• Caution:
Do not store explosive substances or con-
tainers with flammable propellants (cans,
spray cans, etc.) in the unit. Risk of explo-
sion.
Defrosting
Defrosting of the refrigerator compartment
is done automatically. The defrosted water
flows through the drain channel into a col-
lection container at the back of the appli-
ance.
During defrosting, water drops form at the
back of the refrigerator due to the evapor-
ator.
If the drops do not all flow downwards, they
may freeze again after defrosting. Clean
them with a cloth soaked in warm water,
but never with a hard or sharp object.
7.2 Placing Your Refrigerator Under
the Countertop and Adjusting
the Feet
When your refrigerator is placed, the dis-
tance between the wall and the product
should be at least 30 mm as shown in the
figure. The air intake ducts should not be
blocked to avoid a decrease in the perform-
ance of your refrigerator. (140 cm2)
If the refrigerator is not balanced;
It can be ensured to stand balanced by ro-
tating the front legs of the refrigerator as in
the figure. The corner of the leg is lowered
when rotated in the direction of black ar-
row; and it is raised when rotated in the
counter direction. Getting help from a per-
son to lift the refrigerator slightly during
this operation will make it much easier.
EN
EN / 19
7.3 Reversing the Door Opening
Side
The door opening side of your refrigerator
can be reversed according to the place you
put it. For the products that include elec-
tronical display when you need this, you
should definitely call the nearest Author-
ized Service.
7.4 Replacing the Illumination Lamp
Call the Authorized Service when the Bulb/
LED used for lighting in your refrigerator
will be replaced.
Lamp(s) used in this appliance cannot be
used for house lighting. Intended use of
this lamp is to help the user place food into
the refrigerator / freezer safely and com-
fortably.
8 Maintenance and Cleaning
Read the “Safety Instructions” first!
Before cleaning your product, unplug it or
de-energize the fuse to which it is connec-
ted.
Do not place your hands, feet or metal ob-
jects under the refrigerator or between the
refrigerator and the floor for whatsoever
reason. Jamming may occur or any sharp
edge may cause personal injuries.
• Do not use sharp or abrasive tools to
clean the product. Do not use materials
such as household cleaning agents,
soap, detergents, gas, gasoline, thinner,
alcohol, wax, etc.
• The dust shall be removed from the vent-
ilation grill on the rear of the product at
least once a year (without opening the
cover). Clean the product with a dry cloth.
• Take care to keep water away from the
lamp's cover and other electrical parts.
• Clean the door with a damp cloth. Re-
move all contents to remove the door
and body racks. Remove the door racks
by lifting them upwards. Clean and dry
the shelves, then attach back in place by
sliding from above.
• Do not use chlorinated water or cleaning
products on the exterior surface and
chrome coated parts of the product.
Chlorine will cause rust on such metallic
surfaces.
• Do not use sharp and abrasive tools,
soap, house cleaning materials, deter-
gents, gas, gasoline, varnish and similar
substances to prevent deformation of
and removal of prints on the plastic part.
Use warm water and a soft cloth for
cleaning, and then dry it.
• On the products without a No-Frost fea-
ture, water droplets and icing up to a
thickness of a finger may occur on the
rear wall of the cooler compartment. Do
not clean, and never apply oils or similar
materials.
EN
EN / 20
• Use only a mildly dampened micro-fibre
cloth to clean the external surface of the
product. Sponges and other types of
cleaning clothes may cause scratches.
• To clean all removable components dur-
ing the cleaning of the interior surface of
the product, wash these components
with a mild solution consisting of soap,
water and carbonate. Wash and dry thor-
oughly. Prevent contact of water with illu-
mination components and the control
panel.
• Do not use vinegar, rubbing alcohol or
other alcohol based cleaning agents on
any interior surface.
Stainless Steel External Surfaces
Use a non-abrasive stainless steel cleaning
agent and apply it with a soft lint-free cloth.
To polish, gently wipe the surface with a mi-
cro-fibre cloth dampened with water and
use dry polishing chamois. Always follow
the veins of the stainless steel.
Preventing Odours
The product is manufactured free of any
odorous materials. However, inappropri-
ately storing food and improper cleaning of
internal surfaces may lead to odours.
• To avoid this, clean the inside with car-
bonated water every 15 days.
• Keep the foods in sealed holders, as mi-
cro-organisms arising from foods kept in
unsealed containers will cause bad
odour.
• Do not keep expired and spoilt foods in
the refrigerator.
Protecting Plastic Surfaces
Oil spilled on plastic surfaces may damage
the surface and must be cleaned immedi-
ately with warm water.
9 Troubleshooting
Read the “Safety Instructions” first!
Check this list before contacting the ser-
vice. Doing so will save you time and
money. This list includes frequent com-
plaints that are not related to faulty work-
manship or materials. Certain features
mentioned herein may not apply to your
product.
If the problem persists after following the
instructions in this section, contact your
vendor or an Authorized Service. Do not try
to repair the product.
The refrigerator is not working.
• The power plug is not fully settled. >>>
Plug it in to settle completely into the
socket.
• The fuse connected to the socket power-
ing the product or the main fuse is blown.
>>> Check the fuse.
Condensation on the side wall of the
cooler compartment (MULTI ZONE,
COOL CONTROL and FLEXI ZONE).
• The door is opened too frequently. >>>
Take care not to open the product's door
too frequently.
• The environment is too humid. >>> Do
not install the product in humid environ-
ments.
• Foods containing liquids are kept in un-
sealed holders. >>> Keep the foods con-
taining liquids in sealed holders.
• The product's door is left open. >>> Do
not keep the product's door open for long
periods.
• The thermostat is set to a very cool tem-
perature. >>> Set the thermostat to an ap-
propriate temperature.
Compressor is not working.
• In case of sudden power failure or pulling
the power plug off and putting back on,
the gas pressure in the product's cooling
system is not balanced, which triggers
the compressor thermic safeguard. The
product will restart after approximately 6
minutes. If the product does not restart
after this period, contact the service.
• Defrosting is active. >>> This is normal
for a fully-automatic defrosting product.
The defrosting is carried out periodically.
• The product is not plugged in. >>> Make
sure the power cord is plugged in.
EN
EN / 21
• The temperature setting is incorrect. >>>
Select the appropriate temperature set-
ting.
• The power is out. >>> The product will
continue to operate normally once the
power is restored.
The refrigerator's operating noise is in-
creasing while in use.
• The product's operating performance
may vary depending on the ambient tem-
perature variations. This is normal and
not a malfunction.
The refrigerator runs too often or for too
long.
• The new product may be larger than the
previous one. Larger products will run for
longer periods.
• The room temperature may be high. >>>
The product will normally run for long
periods in higher room temperature.
• The product may have been recently
plugged in or a new food item is placed
inside. >>> The product will take longer to
reach the set temperature when recently
plugged in or a new food item is placed
inside. This is normal.
• Large quantities of hot food may have
been recently placed into the product.
>>> Do not place hot food into the
product.
• The doors were opened frequently or
kept open for long periods. >>> The warm
air moving inside will cause the product
to run longer. Do not open the doors too
frequently.
• The freezer or cooler door may be ajar.
>>> Check that the doors are fully closed.
• The product may be set to a temperature
that is too low. >>> Set the temperature
to a higher degree and wait for the
product to reach the adjusted temperat-
ure.
• The cooler or freezer door washer may
be dirty, worn out, broken or not properly
settled. >>> Clean or replace the gasket.
Damaged / torn door washer will cause
the product to run for longer periods to
preserve the current temperature.
The freezer temperature is very low, but
the cooler temperature is adequate.
• The freezer compartment temperature is
set to a very low degree. >>> Set the
freezer compartment temperature to a
higher degree and check again.
The cooler temperature is very low, but
the freezer temperature is adequate.
• The cooler compartment temperature is
set to a very low degree. >>> Set the
cooler compartment temperature to a
higher degree and check again.
The food items kept in cooler compart-
ment drawers are frozen.
• The cooler compartment temperature is
set to a very low degree. >>> Set the
cooler compartment temperature to a
higher degree and check again.
The temperature in the cooler or the
freezer is too high.
• The cooler compartment temperature is
set to a very high degree. >>> Temperat-
ure setting of the cooler compartment
has an effect on the temperature in the
freezer compartment. Wait until the tem-
perature of relevant parts reach the suffi-
cient level by changing the temperature
of cooler or freezer compartments.
• The doors were opened frequently or
kept open for long periods. >>> Do not
open the doors too frequently.
• The door may be ajar. >>> Fully close the
door.
• The product may have been recently
plugged in or a new food item is placed
inside. >>> This is normal. The product
will take longer to reach the set temperat-
ure when recently plugged in or a new
food item is placed inside.
• Large quantities of hot food may have
been recently placed into the product.
>>> Do not place hot food into the
product.
EN
EN / 22
Shaking or noise.
• The surface is not flat or durable >>> If
the product is shaking when moved
slowly, adjust the stands to balance the
product. Also make sure the ground is
sufficiently durable to bear the product.
• Any items placed on the product may
cause noise. >>> Remove any items
placed on the product.
• The product is making noise of liquid
flowing, spraying etc.
• The product's operating principles in-
volve liquid and gas flows. >>> This is
normal and not a malfunction.
There is sound of wind blowing coming
from the product.
• The product uses a fan for the cooling
process. This is normal and not a mal-
function.
There is condensation on the product's
internal walls.
• Hot or humid weather will increase icing
and condensation. This is normal and not
a malfunction.
• The doors were opened frequently or
kept open for long periods. >>> Do not
open the doors too frequently; if open,
close the door.
• The door may be ajar. >>> Fully close the
door.
There is condensation on the product's
exterior or between the doors.
• The ambient weather may be humid, this
is quite normal in humid weather. >>>
The condensation will dissipate when the
humidity is reduced.
The interior smells bad.
• The product is not cleaned regularly. >>>
Clean the interior regularly using sponge,
warm water and carbonated water.
• Certain holders and packaging materials
may cause odour. >>> Use holders and
packaging materials without free of
odour.
• The foods were placed in unsealed hold-
ers. >>> Keep the foods in sealed hold-
ers. Micro-organisms may spread out of
unsealed food items and cause bad
odour.
• Remove any expired or spoilt foods from
the product.
The door is not closing.
• Food packages may be blocking the
door. >>> Relocate any items blocking
the doors.
• The product is not standing in full upright
position on the ground. >>> Adjust the
stands to balance the product.
• The surface is not flat or durable >>>
Make sure the surface is flat and suffi-
ciently durable to bear the product.
The crisper is jammed.
• The food items may be in contact with
the upper section of the drawer. >>> Re-
organize the food items in the drawer.
Temperature on the product surface.
• High temperature may be observed
between two doors, on the side panels
and on the rear grill area while your
product is operated. This is normal and it
does not require servicing.
Fan continues to operate when the door
is opened.
• Fan may continue to operate when the
freezer door is open.
If the problem persists after following the
instructions in this section, contact your
vendor or an Authorized Service. Do not try
to repair the product. This is normal.
EN
EN / 23
EN
EN / 24
DISCLAIMER
Some (simple) failures can be adequately
handled by the end-user without any safety
issue or unsafe use arising, provided that
they are carried out within the limits and in
accordance with the following instructions
(see the “Self-Repair” section).
Therefore, unless otherwise authorized in
the “Self-Repair” section below, repairs
shall be addressed to registered profes-
sional repairers in order to avoid safety is-
sues. A registered Professional repairer is a
professional repairer that has been granted
access to the instructions and spare parts
list of this product by the manufacturer ac-
cording to the methods described in legis-
lative acts pursuant to Directive 2009/125/
EC.
However, only the service agent (i.e.au-
thorized professional repairers) that you
can reach through the phone number given
in the user manual/warranty card or
through your authorized dealer may
provide service under the guarantee terms.
Therefore, please be advised that repairs
by professional repairers (who are not au-
thorized by) Beko shall void the guarantee.
Self-Repair
Self-repair can be done by the end-user
with regard exclusively to the following
spare parts:door handles,door hinges, trays,
baskets and door gaskets (an updated list
is also available support.beko.com as of
1st March 2021).
Moreover, to ensure product safety and to
prevent risk of serious injury, the mentioned
self-repair shall be done following the in-
structions in the user manual for selfrepair
or which are available in sup-
port.beko.com . For your safety, unplug the
product before attempting any self-repair.
Repair and repair attempts by end-users for
parts not included in such list and/or not
following the instructions in the user manu-
als for self-repair or which are available in
support.beko.com, might give raise to
safety issues not attributable to Beko, and
will void the warranty of the product.
Therefore, it is highly recommended that
end-users refrain from the attempt to carry
out repairs falling outside the mentioned
list of spare parts, contacting in such cases
authorized professional repairers or re-
gistered professional repairers. On the con-
trary, such attempts by end-users may
cause safety issues and damage the
product and subsequently cause fire, flood,
electrocution and serious personal injury to
occur.
By way of example, but not limited to,the
following repairs must be addressed to au-
thorized professional repairers or re-
gistered professional repairers:compressor,
cooling circuit, main board,inverter board,
display board, etc.
The manufacturer/seller cannot be held li-
able in any case where end-users do not
comply with the above.
The spare part availability of the refriger-
ator that you purchased is 10 years.During
this period, original spare parts will be avail-
able to operate the refrigerator properly
The minimum duration of guarantee of the
refrigerator that you purchased is 24
months.
This product is equipped with a lighting
source of the "G" energy class.
The lighting source in this product shall
only be replaced by Professional repairer.
Beko UK and ROI Standard MANUFACTURER Guarantee Terms
AND Conditions
Your new Beko product is guaranteed
against faulty materials, defective compon-
ents or manufacturing defects.
EN
EN / 25
The standard guarantee starts from the date of original purchase of the product and lasts for a period of twelve
(12) months unless Beko plc (the “Manufacturer”) agrees to extend the guarantee for the product in writing.
If you have any questions about the guaran-
tee on your product (including how long it is
valid), please contact your retailer or our
Customer Service Team on 0333 207 9710
(UK and Northern Ireland) or 01 862 3411
(Republic of Ireland)
This guarantee does not in any way dimin-
ish or affect your statutory rights in connec-
tion with the product. This guarantee is in
addition to your statutory rights as a con-
sumer. If you have any questions about
these rights, please contact the retailer
from which you purchased the product. In
certain circumstances, it is possible that
your statutory rights may offer additional or
higher levels of protection than those
offered under the terms of this guarantee.
What is covered by this guarantee?
• Repairs to the product required as a res-
ult of faulty materials, defective compon-
ents or manufacturing defects.
• Functional replacement parts to repair a
product.
• The costs of a Beko plc Authorised Ser-
vice Representative or Approved Engin-
eer (together the “Service Representat-
ives”) to carry out the repair.
What is not covered?
• Transit and delivery damage.
• Cabinet or appearance parts, including
but not limited to control knobs, flaps
and handles.
• Accessories and/or consumable items
including but not limited to ice trays,
scrapers, cutlery baskets, filters and light
bulbs.
• Repairs necessary as a direct or indirect
result of:
– Accidental damage, misuse or abuse
of a product.
– An attempted repair of a product by
anyone other than a Service Repres-
entative.
– Installation or use of a product where
such installation or use fails to meet
the requirements contained in this
guarantee or the User Instructions
Booklet.
• Repairs to a product operated at any time
on commercial or non-residential house-
hold premises (unless we have previously
agreed to the installation environment).
This guarantee is limited to the cost of re-
pairing the product. To the extent permitted
by law, the Manufacturer does not accept
and will not be held liable for any financial
loss incurred in connection with the failure
of any product to operate in accordance
with the expected standards. Such financial
loss includes but is not limited to loss
arising from:
• Time taken off work.
• Damaged food, clothing or other items.
• Meals taken at restaurants or from
takeaways.
• General compensation for inconveni-
ence.
Important Notes
1. Your product is designed and built for
domestic household use only.
2. The guarantee will automatically be
void if the product is installed or is
used in commercial or non-residential
domestic household premises, unless
we have previously agreed to the in-
stallation environment.
3. The product must be correctly in-
stalled, located and operated in accord-
ance with the instructions contained in
the User Instructions Booklet provided
with your product.
4. Professional installation by a qualified
electrical domestic appliance installer
is recommended for all Washing Ma-
chines, Dishwashers and Electric Cook-
ers (as incorrect installation may result
in you having to pay for the cost of re-
pairing the product).
EN
EN / 26
5. Gas Cookers must be professionally in-
stalled by a Gas Safe (or Gas Networks
Ireland for Republic of Ireland) re-
gistered gas installer.
6. This guarantee is given in respect of
products purchased and used within
the United Kingdom and the Republic
of Ireland.
7. This guarantee is effective from the ini-
tial date of purchase of a new product
from an authorised retailer and will be
void if the product is resold.
8. This guarantee does not apply to
graded sales (where the product is pur-
chased as a “second”).
9. Possession of a copy of these terms
and conditions does not necessarily
mean that a product has the benefit of
this guarantee. If you have any ques-
tions, please call our Customer Service
Team on the number set out above.
10. The Manufacturer reserves the right to
terminate the guarantee if its staff or
representatives are subjected to phys-
ical or verbal abuse in the course of
carrying out their duties.
11. Optional extras, where available (i.e.
extendable feet) are supplied on a
chargeable basis only.
Does Beko offer replacements?
This is a repair-only guarantee. On occa-
sion, the Manufacturer may at its sole dis-
cretion, replace your product with a new
product instead of carrying out a repair.
Where a replacement is offered, this would
normally be an identical model but when
this is not possible, a model of similar spe-
cification will be provided. Subject to agree-
ment, the Manufacturer will cover the costs
and arrange for the delivery of the new
product and for the return of the old
product. Any costs related to disconnecting
the faulty product and installing the re-
placement product will not be borne by the
Manufacturer unless previously agreed to
in writing. The original guarantee will con-
tinue to apply to the replacement product;
the new product will not come with a new
guarantee.
When will the repair take place?
Our Service Representatives work Monday
to Friday 9.00am to 5.00pm. Appointments
outside these hours may be possible at the
sole discretion of the Manufacturer but
cannot be guaranteed. Whilst our Service
Representatives will endeavour to minimize
inconvenience and to meet requests for
specific timed appointments, this cannot
be guaranteed. We will not be liable for
delays or if it is unable to carry out a repair
because a convenient appointment cannot
be arranged.
Will there be any charge for the repairs?
It is your responsibility to provide evidence
to the Service Representative that your
product is covered by this guarantee with a
proof of purchase. The Manufacturer re-
serves the right to charge for the reason-
able cost of any service call if:
• You cannot provide evidence that your
product is covered by this guarantee.
• Where a service call has been made and
the Service Representative finds that
there is no fault with your product.
• That your product has not been installed
or operated in accordance with the User
Instructions Booklet.
• That the fault was caused by something
other than faulty materials, defective
components or manufacturing defects.
• For missed appointments.
Payment of these costs are due immedi-
ately upon the Service Representative
providing you with an invoice. The Manu-
facturer reserves the right to terminate the
guarantee if you fail to pay the costs for the
service call in a timely manner.
If you are a resident of the United Kingdom,
this guarantee will be governed by English
law and subject to the exclusive jurisdiction
of the English Courts, save where you live in
another part of the United Kingdom, in
which case the governing law and exclusive
jurisdiction of the courts of that country will
apply.
EN
EN / 27
If you are resident in the Republic of Ire-
land, this guarantee will be governed by Ir-
ish law and the Irish courts will have exclus-
ive jurisdiction.
This guarantee is provided by Beko plc.
Beko House, 1 Greenhill Crescent, Watford,
Hertfordshire. WD18 8QU.
Beko plc is registered in England and Wales
with company registration number
02415578.
Beko UK AND ROI Built-In Appliances Guarantee Terms AND Conditions
If you have purchased a American style fridge freezer, built-in or integrated appliance, and registered it within 90
days of purchase by completing our online registration form or our by calling our telephone registration line, then
the standard 12 month guarantee will be extended to 24 months, under the same terms and conditions as detailed
in our Standard Guarantee Terms and Conditions.
Beko UK and ROI PARTS GUARANTEE
Terms AND Conditions
This 10 year parts guarantee relates to
Beko products.To confirm if your Beko ap-
pliance has our 10-year parts guarantee
you can visit our website at beko.co.uk/
guarantee-terms or telephone our registra-
tions team on 0800 497 0683.
The Parts guarantee terms and conditions
are in addition to our Standard guarantee
terms and conditions detailed in the previ-
ous section.
In order to activate the 10 year parts guarantee you MUST register the appliance within 90 days of the original
purchase date. You can register by visiting our websites. For UK customer visit beko.co.uk/register or phone 0800
497 0683. For ROI customers visit beko.ie/register or phone 1803 000 081. Our Beko branded appliances carry
FREE replacement parts for the first 10 years, provided they are fitted by our Service Representatives, at the ap-
plicable labour charge.
Beko free standing appliances come with a
12 month parts and labour guarantee as
standard.
Beko built-in, integrated appliances or
American fridge freezers come with a 12
month parts and labour guarantee as
standard. This is extended to 24 months,
free of charge, upon registration within 90
days of the purchase of the appliance.
When you register your appliance for addi-
tional guarantee, you will automatically ac-
tivate the 10 year parts guarantee. You do
not need to register twice.
To make a claim against your Beko Parts
Guarantee (the “Guarantee”), all customer
and product details must be registered with
Beko plc using the procedure outlined be-
low:
1. This extra 9 years (for free standing ap-
pliances) or 8 years (for built-in or in-
tegrated appliances or American fridge
freezers) guarantee is only effective
after the expiration of the standard
manufacturer’s guarantee.
2. It is only valid for certain models of
Beko branded products serviced or re-
paired by Beko plc Authorised Service
Representative and Own Engineers (the
“Service Representative”) and does not
cover any labour charge or any:
– Components including but not limited
to cabinet or appearance parts, control
knobs, flaps and handles.
– Accessories and/or consumable items
including but not limited to ice trays,
scrapers, cutlery baskets, filters and
light bulbs.
3. To activate your guarantee, you MUST
register your appliance within 90 days
of the original purchase date, For UK
customers, visit beko.co.uk/register or
phone 0800 497 0683. For ROI custom-
ers visit beko.ie/register or phone 1803
000 081.
4. Registrations made after 90 days of
the original purchase date, may be re-
quired to pay an additional fee to activ-
ate the 10 year free parts guarantee.
EN
EN / 28
5. Any repair must be carried out by a Ser-
vice Representative and booked dir-
ectly with Beko plc.
6. Labour for the repair is not included in
this guarantee and is chargeable at the
time of booking a repair.
7. The repair is guaranteed for 3 months
for the same defect.
8. In the unlikely event that the appliance
is beyond economical repair we may at
the sole discretion of Beko plc offer
you an appliance at a reduced price.
Our call out fee will still apply.
9. If the fault can’t be identified and the
appliance is functioning normally a call
out fee will apply.
10. The guarantee is not transferable and
cannot be exchanged for cash.
11. There are no alternative or additional
offers to this guarantee.
12. The guarantee is exclusive of the man-
ufacturer’s standard guarantee.
13. All repair pricing can be found here
beko.co.uk/guarantee-terms (UK & ROI).
Alternatively contact our Customer Ser-
vices Team for further information.
14. All prices are subject to change without
notice.
15. We reserve the right to amend, modify,
update, or change these Terms and
Conditions at any time. Any such
changes will be effective immediately
upon being posted on our website or
through other communication meth-
ods. Your continued use of our ser-
vices after the posting of changes con-
stitutes your acceptance of such
changes. It is your responsibility to re-
view these Terms and Conditions peri-
odically to ensure you are aware of any
updates.
16. The Terms and Conditions shown
above are in addition to the standard
terms and conditions of your product
guarantee. Please read and refer to
such Terms and Conditions when mak-
ing any claim.
17. We may use the information you
provide for marketing purposes and to
analyse your purchasing preferences.
We may keep your information for a
reasonable period for these purposes
in accordance with the applicable Data
Protection Laws and General Data Pro-
tection Regulations (GDPR). You can
opt into this service during the registra-
tion process. Further details are avail-
able at beko.co.uk/cookie-and-privacy-
policy
18. These Terms and Conditions are gov-
erned by the laws of England and
Wales; manufacturer: Beko plc, Beko
House, 1 Greenhill Crescent, Watford
WD18 8QU. Company Registration
Number: 02415578.
HOW TO OBTAIN SERVICE FOR YOUR
APPLIANCE
Please keep your purchase receipt or other
proof of purchase details in a safe place;
you will need to have this documentation
available should the product require atten-
tion under guarantee.
Please take a few moments to complete the details below, as you will need this information when you call us, or to
use our online services. For help please visit beko.co.uk/support/model-finder.
• The product model number is printed on
the Operating Instruction Booklet / User
guide
• The product model and serial number is
printed on the Rating Label affixed to the
appliance.
• The Retailer (Purchased from) and Date
of purchase will be printed on your pur-
chase receipt or other proof of purchase
paperwork
• Recording of these details alone will not
count as proof of purchase. A valid proof
of purchase is required for requesting
service under guarantee.
Model number Serial number Purchased from Date of purchase
EN
EN / 29
For service under guarantee or for
product advice please call our Customer
Service Team
Before requesting service please check
the troubleshooting guide in the Operat-
ing Instructions booklet or our video
support found beko.co.uk/support/how-
to-guides, as a charge may be levied
where no fault is found, even though
your product may still be under guaran-
tee.
After arranging a service visit please en-
sure the area around the product must be
easily accessible to the Service Represent-
ative, without the need for cabinets or fur-
niture to be removed or moved.
It is your responsibility to ensure our Service Representatives have a clean and safe
environment to carry out any repairs.
Please have your Model number and Serial number available when you call us, as you will be required to provide it
prior to booking a service visit
UK Mainland & Northern Ireland:
0333 207 9710
Landline or mobile calls to 0333 numbers
cost no more than calls to geographic num-
bers 01 or 02 and are charged at the basic
rate. Calls from landlines and mobiles are in-
cluded in free call packages but please
check with your telephone service provider
for exact call charges.
Republic of Ireland:
01 862 3411
Service once the manufacturers guaran-
tee has expired
If you have purchased an extended guaran-
tee please refer to the instructions con-
tained within the extended guarantee agree-
ment document, otherwise please call us us-
ing the appropriate number above, where
service can be obtained at a charge.
If you do not have any extended guarantee
you can call the Customer Services Team
for UK customers on 0330 123 1750 and
ROI customers on 01 862 3411
Contact us though our website
Send us a secure message through our on-
line contact us form. Please visit our web-
site, click Contact Us and choose a product
support topic from the list of options. Com-
plete the required details and click send
message.
Product registrations
For UK registrations please visit
beko.co.uk/register and for the Republic of
Ireland visit beko.ie/register.
EN
