Product manual
Product name&PMN:Bluetooth remote control
Model&HVIN:ERF2B82H
1
Get your remote ready
The following table shows the buttons on your remote control and describes what they are for.
1
POWER
: Turn your TV on or off
2
App buttons
:
Quick access buttons to apps
3
Guide
:
Open the Live TV Channel Guide
4
D-pad
(up/down/left/right navigation buttons)
5
Back
: Return to the previous place in the menu or
app
6
VOLUME +
/
VOLUME -
: Increase/decrease the
volume
7
MUTE
: Mute or un-mute the sound
8
REWIND
: Rewind streaming video
9
PLAY/PAUSE
: Pause or resume playback. This
button is also used to activate and use the Live
TV pause feature
10
Microphone
:
Receive the voice
11
Input
:
Change TV input source
12
Apps
:
Fast access to all applications
13
/
Voice button
: Holding down the Voice
Button to activate the microphone
14
Quick Settings
: Activate quick settings overlay
15
Select
: Conrm a selection or action
16
MENU
:
The button for the Menu
17
HOME
: Display your TV’s Home screen
18
Channel
▲
/
Channel
▼: Switch channel
19
FAST FORWARD
: Fast forward streaming video
NOTE:
• The picture is only for reference. Check information according to the actual remote control.
1
4
5
13
15
2
3
6
7
12
14
9
8
10
11
16
17
18
19
Insert the batteries
Remove the battery door and insert the two AAA batteries into your Voice Remote with Alexa.
Important information about the remote and batteries
• Discardbatteriesinadesignateddisposalarea.Donotthrowthemintoafire.
Using your cable set-top box or satellite receiver remote as a ‘universal’ remote
If you prefer to use your Cable Set-top Box or Satellite Receiver Remote as a ‘universal’
2
remote, then visit the Support page to view a list of the codes.
• Removeoldbatteriesimmediatelytopreventthemfromleakingintothebattery
compartment.
•
Ifyoudonotintendtousetheremotecontrolforalongtime,thenremovethebatteries.
•
Batterychemicalscancausearash.Ifthebatteriesleak,cleanthebatterycompartment
withacloth.Ifchemicalstouchyourskinthenwashitimmediately.
• Donotmixoldandnewbatteries.
• Donotmixalkaline,standard(carbon-zinc)orrechargeable(NiCd,NiMH,etc.)
batteries.
• Donotcontinueusingtheremoteifitgetswarmorhot.
• CallourSupportCenterimmediatelyonthesupportwebsite.
Certification and compliance
NOTE:
The following warnings only apply to products with such certification.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
●
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
Caution:Any changes or modifications to this device not explicitly approved by manufacturer could
void your authority to operate this equipment.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications
to this equipment. Such modifications could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
This equipment complies with radio frequency exposure limits set forth by the Innovation, Science and
Economic Development Canada for an uncontrolled environment.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1)l' appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter toutbrouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre lefonctionnement.
L'appareil a été évalué pour répondre aux exigences générales d'exposition aux RF. L'ap pareilpeut
être utilisé dans des conditions d'exposition portable sans restriction.
Pour une utilisation en intérieur uniquement.
IMPORTANTNOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment.
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé.
3
