01
[email protected]www.antivetools.com
www.antivetools.com
Please read carefully the instruction manual before use!
INSTRUCTION MANUAL
ELECTRIC SCISSORS
MODEL NO. E-S02
POWER VOLTAGE 3.6V
NO-LOAD SPEED 0-11000 RPM
TABLE OF CONTENTS
Warning! 03
Operation Instruction 04
Cutting Capacity for the
Antive™ Electric Scissors 10
General Safety regulations
for Power Tools usage 11
Antive™ Electric Scissors
Specic Requirements 15
Inspection 17
Repair 17
Maintenance suggestions 17
Package & Accessories 18
Your Notes 19
Certicate of warranty 20
02
TABLE OF CONTENTS
www.antivetools.com
WARNING FINGERS CUTTING HAZARD!
Read all safety warnings, user manual instructions provided in the
package, pictures, and provisions. Failure to follow the warnings and
instructions may result in cuts, electric shock, re, and/or serious injury.
WORK AREA AND PERSONAL SAFETY
• Prevent unintentional starting. Ensure you don’t have your nger on
the trigger button when you maneuver it, picking up or carrying the
scissors. Carrying power tools with your nger on the switch invites
accidents. Always remove the scissor shear head when not in use, and
place it in the carrying bag provided.
• Not destined to be used by children under 10 years old. All above the
age limit must be supervised when using the electric scissor.
Always safely store it after you use it in the carrying bag provided.
• Keep the work area clean and well-lit.
Cluttered or dark areas invite accidents.
• Do not operate the electric scissor in explosive atmospheres, such as
in the presence of ammable liquids, gases, or dust.
Power tools create sparks that may ignite dust or fumes.
• Keep children and bystanders away while operating the scissor.
Distractions can cause you to lose control and get cut.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE!
The term “power tool” in the warnings refers
to your ‘Electric Cordless Scissor’.
For more details about how to operate the Antive Electric Cordless
Scissor don’t hesitate to contact us:
NOTE!
03
WARNING FINGERS CUTTING HAZARD!
[email protected]www.antivetools.com
Operation Instruction
1. CHARGING THE ELECTRIC CORDLESS SCISSOR
(Please refer to FIGURE 1 below)
1. Insert the Type-C end of the charging cable into the corresponding
Type-C port on the scissor. Connect the USB end of the charging cable
to a 5V power adapter. Once connected, a red light will appear near
the transparent lampshade, indicating the device is charging. When
the red light turns green, the battery is fully charged. After charging is
complete, unplug the Type-C cable from the scissor and disconnect
the charger from the power outlet to conserve energy.
It is normal for the charger and the surface of the battery to feel warm
during charging. The device is compatible with most standard phone
chargers available on the market. In high-temperature environments
or after extended use, the scissors may become hot. Do not charge the
device immediately in this condition. Allow the battery to cool down
before charging to prevent potential damage. Charging while the
battery is overheated can shorten its lifespan or even prevent charging.
Type C Hole
Type C Plug
Type C Data Cable
USB Plug
RED light ON means it’s charging
GREEN light ON means it’s fully charged
FIGURE 1
IMPORTANT NOTE!
04
Operation Instruction
www.antivetools.com
2. INSERTING OR CHANGING THE SHEAR HEAD ASSEMBLY
(Please refer to FIGURE 2 below)
STEP 1) Pull up the safety lock button (3) and inseart the Shear Head
assembly (4), repeat the process if you want to remove the Shear Head.
STEP 2) Install the correct shear head assembly (4) by sliding it into
place. Make sure to select the right one for your task — either the
Silver blunt alloy or Black sharp tungsten steel. Refer to the “Max
Cutting Capacity” section in the ‘Cutting Capacity for the Antive
Electric Scissors’ chapter to choose the appropriate shear head for
your work.
STEP 3) Release the safety lock button. (3)
54
3
2
1
FIGURE 2
Trigger button
START / STOP button
Safety lock button
Shear Head assembly
Screws and screwdriver
5
4
3
2
1
05
Operation Instruction
[email protected]www.antivetools.com
STEP 4) To complete the installation, insert the screws (5) on both
sides of the Shear Head assembly (4) and tighten them with the
provided screwdriver. This reduces vibration during use. For short cuts,
the screws aren’t necessary, but for longer sessions, they help improve
stability and reduce noise.
STEP 5) After nishing your work, place the protective plastic cap on
the shear head assembly to protect the blades.
STEP 6) To remove the shear head assembly, slide up the safety lock
button (3) and rmly pull the shear head assembly (4) out.
Always store it in the provided bag with the plastic protective caps on.
06
Operation Instruction
www.antivetools.com
3. STARTING OPERATION
(Please refer to FIGURE 3 below)
STEP 1) First, check that the machine is in good condition and ensure
the shear head assembly (1) is securely attached. Also, conrm that
the tool is fully charged.
Unplug the scissors before proceeding, as the electric scissors will not
operate while plugged in.
STEP 2) After the inspection, press and hold the START / STOP button
(2) for 2 seconds to power ON the tool.
STEP 3) Once the machine is ON, align the opening of the scissors with
the material you want to cut. Press and hold the trigger button (3)
to begin cutting, and guide the electric scissors forward, following a
straight line or curve based on your guidelines. Release the trigger
button (3) when you have nished cutting.
STEP 4) To power OFF the electric scissors, press and hold the
START / STOP button (2) again for 2 seconds. The tool will power down.
IMPORTANT NOTE!
FIGURE 3
3
2
1
Long press 2 seconds
to START / STOP the tool
Shear Head assembly
START / STOP button
Trigger button
3
2
1
07
Operation Instruction
[email protected]www.antivetools.com
4. LED LIGHT AND BATTERY INDICATOR
When the tool is operating normally, the circular LED indicator (located
behind the circle window on top of the tool) will light up. While running,
the indicator will display the current battery level using three LED lights:
GREEN: HIGH BATTERY LEVEL
YELLOW: MEDIUM BATTERY LEVEL
RED: LOW BATTERY LEVEL
When you release the trigger button or the safety start button, the LED
light will turn off, indicating that the power indicator is no longer active.
To check just the battery status, simply press either the trigger button or
the start button once, and the tool will display the remaining battery level.
The typical lifespan of a 3.6V Lithium-Ion battery is about two to three
years, or 300 to 500 charge cycles, whichever comes rst.
Rechargeable Lithium-Ion batteries have a limited lifespan and will
gradually lose their ability to hold a charge over time.
08
Operation Instruction
www.antivetools.com
This process (aging) is irreversible. As the battery ages, the run time
will decrease accordingly. Lithium-ion batteries also self-discharge
slowly when not in use or during storage. It is recommended to
routinely check the battery’s charge status.
Please refer to the table below for detailed information on checking
battery power status and instructions for charging the battery.
State of the LED’s
Approximate remaining
battery power status
The GREEN Color Light is ON ≥60% Battery Power
The YELLOW Color Light is ON ≥30% Battery Power
The RED Color Light is ON
<30% Battery Power,
Needs Charging
All indicator lights out
Insufcient battery,needs
charging. Full battery
charging time, 3~4 hours.
09
Operation Instruction
[email protected]www.antivetools.com
Cutting Capacity for the
Antive Electric Scissors
We at Antive are constantly trying to improve the quality of our
products and may change the appearance, parameters, and certain
constructs of our products without prior notice or user manual
modications. But this won’t affect the functionality of your received
product or its intended use and proven capacities.
The next pictures from the user manual are for reference only and will
apply to your Electric Cordless Scissors functionality and instructions.
If you don’t understand some of the guidance or you need more
information, don’t hesitate to contact us.
NOTE!
Black Sharp
Model
E-S02
Voltage 3.6v
Silver Blunt
No-load speed
11000/min
Battery capacity 3.6v 2000 mAh
Maxim cutting
capacity
Black Sharp
Tungsten steel
Shear Head
Cotton fabric
8 mm
Velvet, felt
products,
soft leather,
corrugated board
6 mm
Silver Blunt alloy
Shear Head
Plastic/ cloth
carpet, PVC
plastic
3 mm
Plant stem, vinyl-
based fabrics
4 mm
Hard leather,
hard paperboard
1,5 mm
Tin/ aluminium
0,8 mm
Charging power (Type C cable)
Input: 100-240V~ 50/60 Hz
Output: 5V 1000 mA
Frontal LED Light 100 lm
10
Cutting Capacity for the Antive Electric Scissors
www.antivetools.com
General Safety regulations
for Power Tools usage
Before operating the Power Tool of the Electric Cordless Scissor,
read rst all safety warnings, provided in the next lines, pictures, and
provisions on, or from the package. Failure to follow the warnings and
instructions may result in cuts, electric shock, re, and/or serious injury.
Keep safe this user manual, and save all warnings and instructions for
your future reference.
The term “power tool” in the warnings refers to your electric-operated
(corded) power tool or battery-operated (cordless) power tool such
as your Electric Cordless Scissor.
WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in
the presence of ammable liquids, gases, or dust.
Power tools create sparks that may ignite dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
d) Always safely store the Electric Cordless Scissor after you use it in
the carrying bag provided.
ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug
in any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodied plugs and matching outlets will reduce the
risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges, and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
c) Do not expose the Electric Cordless Scissors to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
11
General Safety regulations for Power Tools usage
[email protected]www.antivetools.com
d) Do not abuse the cord of the Charger. Never use the cord for
carrying, pulling, or unplugging the power tool. Keep the cord away
from heat, oil, sharp edges, or moving parts.
Damaged or entangled cords increase the risk of electric shock.
e) When operating an Electric Cordless Scissor outdoors, use an
extension cord suitable for outdoor use. The use of a cord suitable for
outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use
a residual current device (CD) protected supply. The use of a CD
reduces the risk of electric shock.
The term “residual current device (RCD)” can be replaced by the
term “ground fault circuit breaker (GFCI)” or “ground leakage circuit
breaker (ELCB)”.
PERSONAL SAFETY
a) Prevent unintentional starting. Ensure you don’t have your nger on
the trigger button when you maneuver it, picking up or carrying the
scissors. Carrying power tools with your nger on the switch invites
accidents. Always remove the scissor shear head when not in use, and
place it in the carrying bag provided.
b) Not destined to be used by children under 10 years old. All above the
age limit must be supervised when using the electric scissor.
Always safely store it after you use it in the carrying bag provided.
c) Stay alert, watch what you are doing, and use common sense when
operating a power tool especially an Electric Cordless Scissor.
Do not use a power tool while you are tired or under the inuence of
drugs, alcohol, or medication. A moment of inattention while operating
power tools may result in serious personal injury and serious cuts.
d) Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust masks, non-skid safety shoes,
hard hats, or hearing protection used for appropriate conditions will
reduce personal injuries.
e) Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool
may result in personal injury.
f) Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
g) Dress properly. Do not wear loose clothing or jewelry.
NOTE!
12
General Safety regulations for Power Tools usage
www.antivetools.com
Keep your hair, clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be caught in moving parts.
h) If devices are provided for the connection of dust extraction and
collection facilities, ensure these are connected and properly used.
The use of dust collection can reduce dust-related hazards.
i) Do not let the familiarity of frequent use of a tool stop you from following
safety guidelines. careless action can cause serious injury in an instant.
If you need more info don’t hesitate to contact us.
ELECTRIC CORDLESS SCISSOR USE AND CARE
a) Do not force the Electric Cordless Scissor above the specic cutting
ranges. Use the correct power tool for your application. The correct power
tool will do the job better and safer at the rate at which it was designed.
b) Do not use the Electric Cordless Scissor if the switch does not turn
on and off. Any power tool that cannot be controlled with the switch is
dangerous and must be repaired or replaced by a new one.
Don’t hesitate to contact us if you encounter inconveniences.
c) Make sure you don’t accidentally touch the on button when
making any adjustments, changing accessories, or storing the Electric
Cordless Scissor. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle Electric Cordless Scissors out of the reach of children
and do not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are dangerous in
the hands of untrained users.
e) Maintain the Electric Cordless Scissor. Check for misalignment or
binding of moving parts, breakage of parts, and any other condition
that may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
f) Use the Electric Cordless Scissor, accessories and tool bits, etc.In
accordance with these instructions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different from those intended
could result in a hazardous situation.
g) Keep the handle and grip surface dry and clean without grease.
In the event of an accident, a wet handle does not guarantee a safe
grip and control of the tool.
13
General Safety regulations for Power Tools usage
[email protected]www.antivetools.com
PRECAUTIONS OF ELECTRIC CORDLESS SCISSOR PRODUCTS
a) Please use only the charger from the package.
Others may lead to a re or accidents.
b) Please keep the battery away from metal objects when unused, like
paper clips, coins, keys, nails, screws, and other small metal objects.
Preventing the battery from touching metal objects.
The battery short circuit may cause a re.
c) Liquid may get out when abusing the Electric Cordless Scissor,
please do not touch it. Wash with water if touched. Please ask the
doctor for help if your eyes are touched. The liquid from the battery
may lead to corrosion and re.
e) Do not use damaged or modied batteries or tools.
A damaged or modied battery can have unpredictable results,
causing res, explosions, or injuries.
f) Do not expose the battery to re or high temperatures.
Exposure of the battery to re or temperatures above 130° C
may cause an explosion.
SERVICE AND SUPPORT
a) Don’t service your Electric Cordless Scissor without Antive consent.
Always contact us if need of repairing or servicing.
a) Have your Electric Cordless Scissor serviced by a qualied repair
person approved by Antive™, using only identical replacement parts.
This will ensure that the safety of the power tools is maintained.
c) Never repair a damaged battery. The battery can only be repaired
by Antive™ the manufacturer or its authorized service provider.
d) Please follow the instructions in this manual when lubricating oil
and changing accessories.
e) Handle must be dry clean and oil-free.
14
General Safety regulations for Power Tools usage
www.antivetools.com
Antive™ Electric Scissors
Specic Requirements
01. The Antive™ Electric Cordless Scissor uses built-in lithium-ion
batteries, and the batteries can only be charged by a charger
provided by Antive™, and placed in the initial package. The use of
other batteries or chargers, such as imitations, modied or other
brands, carries a risk of injury and personal injury, and property
damage caused by the explosion of the battery pack.
02. The charger must be connected to an appropriate AC power supply.
03. Cutting items should be in the range mentioned in the ‘Max
Cutting Capacity’ chart from the Antive™ Electric Cordless Scissor
Specications Chapter. The cutting doesn’t have to be or never should
be too hard to apply, by forcing the power tool you will reduce the
service life of the scissors, or even burn down the machine.
04. Before using the Electric Cordless Scissor, please check whether all
parts make unusual sounds or sparks during the operation.
05. The Electric Cordless Scissors must be only used for indoor use and
are prohibited in rain or water.
06. Avoid short circuits of charger connection and battery by keeping
it in dry areas.
07. Only use the original Antive™ accessories, otherwise, it may cause
re, electric shock, or personal injury.
08. Only the blades provided by Antive™ are allowed to be used to
facilitate the installation and using the machine. Check if the blade is
sharp before operation.
09. The workpiece must be clamped or compacted, the workpiece can
be clamped with a vise or other xture, and the long workpiece should
be installed horizontally and rmly.10. When clamping the workpiece,
changing the position and angle of the workpiece, and disassembling
the workpiece, it is necessary to turn off the power supply and make sure
that the tool is safe before proceeding.
11. During operation, pay attention to scratches or damage by scrap.
12. If the tool does not start or makes unusual noise or vibration during
operation, the power supply should be switched off immediately.
13. If the charger cord is damaged, it must be replaced by Antive™.
14. Don’t burn batteries or discard them in re, which may cause
explosions. Don’t charge batteries that leak liquid and don’t charge
non-rechargeable batteries.
15
Antive™ Electric Scissors Specic Requirements
[email protected]www.antivetools.com
15. The battery may leak when the temperature is too high, or the
battery is overused. If battery leaks get on your skin, wash with soap,
then rinse with lemon juice and vinegar.
If contact with the eye accidentally, should immediately rinse with water,
and immediately go to the hospital for examination and treatment.
16. Please recycle and utilize damaged machines, accessories, and
abandoned batteries by local laws and in an environmentally friendly
manner.
17. Don’t place the Electric Cordless Scissors in a place where the
temperature may reach or exceed 122° F (50° C). Always safely store it
in the storage bag provided.
Please keep this user manual in hand. If you misplace your user
manual you can contact us for a digital copy, or you can get one by
following this link – www.antivetools.com/manuals
USEFUL TIPS FOR MAINTAINING THE MAXIMUM
LIFETIME OF THE RECHARGEABLE BATTERY
1. Charge the batter before it is completely depleted.
When the Electric Cordless Scissor is low, please stop the tool
operation and charge the battery.
2. Don’t recharge the fully charged battery.
Overcharging will shorten battery life.
3. Please charge the battery at room temperature of 50° F to 104° F
(10° C-40° C) and charge after the hot battery cools down.
4. If you do not need to use the tool for a long time, please charge the
battery every six months.
16
Antive™ Electric Scissors Specic Requirements
www.antivetools.com
Inspection
Before use, the user must carry out a full inspection of the power tool;
We recommend the users that use the Electric Cordless Scissor to
conduct a full inspection at least once a year even if the power tool
isn’t used a lot;
The inspection should not be made in hot and humid areas with
frequent temperature changes or in areas with poor operating
conditions. As a recommendation, the inspection should be
conducted before the plum rain season.
Repair
Repairs for the Antive™ Electric Cordless Scissor must only be
performed by an
Antive™-approved repair center. The Antive™ Electric Cordless
Scissor comes with a 2-year warranty for household use and a 1-year
warranty for commercial or industrial use, starting from the date of
purchase. Additionally, Antive™ offers a 3-year warranty extension if
you register your product. By registering, you can extend your total
warranty coverage to up to 5 years for household use or 4 years for
commercial or industrial use. For more information, please refer to the
Certicate of Warranty section of this manual.
If you need our service support don’t hesitate to contact us by email,
phone, or site. ([email protected], +1 321 300 4061, www.antivetools.
com). Tools returned for repair must be accompanied by a valid order
ID, full name, and address of shipment.
Maintenance suggestions
1) Clean air vents. The vents of the Antive™ Electric Cordless Scissor
must be kept clean. It should be cleaned regularly or at any time when
a blockage occurs. 2) Check the screws. Always check whether the
screw is securely fastened. If the screw is found to be loose, it should
be tightened immediately to avoid accidents. 3) Clean the entire
power tool with a dry cloth. Don’t use water or chemical cleaning
agents and other liquids to clean the machine.
17
Inspection
[email protected]www.antivetools.com
1. Before checking or maintaining tools, be sure to remove the Shear
head assembly unit, and don’t turn on the power switch trigger.
2. Don’t use gasoline, benzene, diluents, alcohol, or similar cleaning
tools. Otherwise, the tool may become discolored, deformed, or
cracked.
VARIATION OF USAGE
This Electric Cordless Scissor is used for cutting cotton fabric, felt
products, soft leather, corrugated board, plastic/cloth carpet, PVC
plastic sheet, plant stem, hard leather, hardboard, and tin/aluminum
sheet.
1. Make sure you understand the tool before you use it. Always use the
correct Shear head assembly unit (black or silver) for the work you
intend to do. Check chapter Specications for the Antive™ Electric
Cordless Scissor for more information on how to use the power tool.
2. Antive™ reserves the right to change specications without prior notice.
3. Specications and batteries may vary by each country different.
Package & Accessories
WHAT YOU’LL GET!
1 × Antive™ UPGRADED Electric Cordless Scissor with an internal 3.6V 2000
mAh rechargeable Lithium Battery
1 × USB C Charger Cable
1 × Silver blunt alloy shear head with a removable protective cap
1 × Black sharp tungsten steel shear head with a removable protective cap
1 × Carrying bag
1 × Orange carrying wrist strap
1 × User manual
1 × Gift card
1 × Pair of Earplugs
If you need more information about these options,
please don’t hesitate to contacts us.
NOTE!
NOTE!
18
Package & Accessories
www.antivetools.com
CERTIFICATE OF WARRANTY
This Certicate is provided on behalf of Antive Enterprise to customers
who purchase the ‘Electric Cordless Scissor.’ The standard warranty
covers 2 years for household use, starting from the day of purchase.
For tools used in commercial, business, or industrial settings, the
warranty is limited to 1 year, due to the higher levels of wear and
tear experienced in these environments. The internal rechargeable
battery, charger, and all included extra parts are also covered by the
warranty, provided they are from Antive and not third-party brands.
If any manufacturing defects, material issues, or workmanship problems
arise within the warranty period, Antive will repair or replace the tool free
of charge, as long as it has been used and maintained according to
our safety and operating instructions. Please refer to the user manual
for details on proper operation, and feel free to contact us if you require
assistance. Be aware that Antive reserves the right to modify the
terms and conditions of the warranty policy without prior notice, so we
encourage you to review the most current information on our website.
The Antive warranty covers 2 years for household use and 1 year for
commercial use.
However, the warranty does not cover:
Any damage caused by misuse, neglect in usage or maintenance,
accidents, exposure to extreme temperatures, acids, water, unsuitable
storage, excessive impact, or transport damages.
Any damage caused by improper use or exceeding the cutting
parameters outlined in the ‘Electric Cordless Scissor Specications’
chapter, specically under the ‘Max Cutting Capacity’ section of this
User Manual.
Defects caused by spare parts, accessories, or components not made
by Antive or not authorized by Antive. Normal wear and tear items such
as batteries with more than 300 charges or power cable deterioration.
Antive Tools that have been modied, repaired, or attempted to be
repaired by anyone other than Antive-authorized service centers, or
tools that have been partly or completely disassembled.
20
CERTIFICATE OF WARRANTY
www.antivetools.com
Parts repaired or replaced by an Antive-authorized service center
during the warranty period will carry the remaining warranty duration.
Warranty repairs do not extend or renew the original warranty period
of the tool.
No entity other than Antive has the authority to change, extend, or add
to the given warranty terms and conditions. These warranty terms
shall be governed and interpreted in accordance with the laws of the
United States, excluding the law and decree on the international sale
of goods. Consumers may have additional statutory rights in their
own countries, which are not restricted by these warranty terms. The
warranty does not cover compensations for downtime, production
loss, injuries, or property damage.
SUBMITTING A WARRANTY CLAIM
To submit a warranty repair claim, don’t hesitate to contact us by email,
phone, or site. ([email protected], +1 321 300 4061, www.antivetools.
com) Tools returned for warranty repair must be accompanied by a
valid order ID, full name, and address of shipment.
A warranty claim must be submitted with as short a delay as possible.
A warranty claim must be submitted within the warranty period.
WE ARE GRATEFUL THAT YOU CHOSE
THE ANTIVE ELECTRIC CORDLESS SCISSOR!
AS A THANK YOU, WE ARE HAPPY TO OFFER YOU THE POSSIBILITY TO
EXTEND YOUR CURRENT WARRANTY PERIOD BY ANOTHER 3 YEARS
(UP TO 5 YEARS IN TOTAL FOR HOUSEHOLD USE,
AND UP TO 4 YEARS FOR COMMERCIAL USE).
JUST REGISTER YOUR PRODUCT BY FOLLOWING THE INSTRUCTIONS
INCLUDED ON THE CARD YOU RECEIVED IN YOUR PACKAGE.
AND DON’T HESITATE TO CONTACT US FOR ANY SUPPORT OR INQUIRIES.
21
CERTIFICATE OF WARRANTY
[email protected]www.antivetools.com
22
CERTIFICATE OF WARRANTY
www.antivetools.com
+1 321 300 4061
[email protected]www.antivetools.com
antive_tools
antive_tools
Antiveantive_tools
CONTACT INFO
