WOOFER
USER MANUAL
ENGINEERED IN GERMANY
3
General instructions for installing HELIX
loudspeakers
To prevent damage to the speakers and possible inju-
ry, read this manual carefully and follow all installation
instructions. This product has been checked for proper
function prior to shipping and is guaranteed against man-
ufacturing defects.
For a proper performance and to ensure full warranty
coverage, we strongly recommend to get this product in-
stalled by an authorized HELIX dealer.
If you choose to perform your own installation read the
following information and precautions carefully.
Failure to follow the stated precautions may result in
personal injury and / or damage to the audio system or
vehicle.
1. Always make sure that the speaker will t into the in-
tended mounting location and that there is adequate
depth for the magnet system.
2. Check for adequate space between speaker and
window, window crank, power window mechanism,
seat, rear deck torsion bars, and other items which
may interfere with the speaker`s mounting. This
is very important if any hole cutting is required.
Detailed size information is indicated in the dimen-
sion section of this manual. Take care that the mount-
ing surface is at and free from all obstructions.
3. Ensure that the loudspeakers are correctly connect-
ed in polarity. Exchanging plus and minus may result
in signicant loss of sound quality. The positive leads
of the loudspeakers are marked red.
4. Make sure that all speaker wiring is fully protected
from cutting or wear at sharp edges, which can lead
to short circuits that may damage your head unit,
amplier and / or speaker system.
5. Verify that all connection wires are long enough in
order to avoid any mechanical stress on the wires or
the connectors.
6. Make sure that all components are mounted properly.
7. Do not mount the components where water may
splash on them.
8. The quality of the installation has a signicant eect
on the overall performance of the speaker system.
Treat each installation step with a high degree of
attention.
9. Avoid low frequency cancellation caused by air leak-
age between the speaker basket and the mounting
surface (e.g. mounted on a bended or uneven sur-
face or mounted in an oversized hole).
10. Mounting panel reinforcement may be necessary in
some cases in order to ensure a stable, torsion-free
and even surface. This can be achieved by mounting
the speaker on a metal, plastic or wooden sub-bae
behind the body or door panel. Consult an installa-
tion specialist for further advices.
11. In most cases you can use the original speaker
mounting locations in the doors, A-pillars, body pan-
els or the rear deck. If these are not available you
have to prepare your own secure installation place.
Due to their structural integrity and accessibility the
precut mounting holes should be used whenever
possible. Information on a proper mounting can be
found in the section “Installation” of this manual.
IMPORTANT: Never cut any metal that is an integral part
of an automobile`s safety or structural car body.
We strongly recommend that you operate the complete
audio system at low volume before nal installation. So
you can check whether each speaker is working before
securing the loudspeakers into their mounting locations.
Congratulations!
General instructions
Dear Customer,
Congratulations on your purchase of this high-quality product.
HELIX COMPOSE highlights best quality, excellent manufacturing and state-of-the-art sound quality.
Thanks to more than 35 years of experience in research and development of audio products HELIX COMPOSE sets
new standards in the car audio speaker market.
We wish you many hours of enjoyment with your new HELIX COMPOSE components.
Yours
AUDIOTEC FISCHER Team
Find your composition
Go to www.audiotec-fischer.com/compose to
explore the whole HELIX COMPOSE platform
4
Installation
*Contact your retailer or visit www.audiotec-fischer.com/compose for an up-to-date overview of available adaptors.
Mounting Ci5 W200FM
Option a:
Universal mounting
Option c:
Universal mounting with optionally available
speaker grille set CiA SG200
Option b:
Professional integration with optionally available
car-specic adaptor*
5
Connection cable
CWK FX-W550CC
(optionally available)
Cut o the plug of the cable and connect it to the
amplier.
Option b: Universal connection, e.g. in active appli-
cations
Wiring
+ (positive): large at terminal
- (negative): small at terminal
Option a: Universal connection to the blade terminals via
optional car-specic harness or COMPOSE
, e.g. in active applications
Optional car-
specic wiring
harness
Optional
or
Ensure that all components are correctly connected in polarity, i.e. plus to plus and minus to minus.
The positive leads of the loudspeaker system are marked red.
6
Dimensions
Ci5 W200FM-S3
ø186.0mm
ø7.32”
ø195.0mm
ø7.68”
65.8mm
2.59”
ø173.5mm
ø6.83”
Technical data measured using KLIPPEL
®
Analyzer System
Ci5 W200FM-S3
Power RMS / Max. P 125 / 175 Watts
Impedance Z 3 Ω
DC resistance Re 3.2 Ω
Frequency response acc. to
IEC 60268-23 18
30 Hz - 8,450 Hz
Resonance frequency
Fs
57.1 Hz
Mechanical Q factor Qms
3.74
Electrical Q factor Qes
0.84
Total Q factor Qts
0.68
Compliance Cms
344 μm/N
Equivalent air volume Vas
21.7 L
Force factor B*I
5.6 Tm
Sensitivity SPL
93 dB @ 2.83V / 1m
89 dB @ 1W / 1m
Cone area Sd 211 cm²
Moving mass Mms 22.7 g
Cone material
Silicon coated paper cone
Mechanical resistance Rms
2.16 kg/s
Voice coil diameter Ø
35 mm
Voice coil winding height
15.6 mm
Max. linear excursion (82 % BL) Xlin +/- 5.5 mm
Max. mechanical excursion Xmax +/- 12.7 mm
Features
terminal and
7
FlexMount car-specic adaptors
Contact your retailer or visit
www.audiotec-scher.com/compose for an up-to-date
overview of available car-specic adaptors
The car-specic adaptor rings (sold separately) allow a tailored and acoustically optimized adaption
of the HELIX COMPOSE Ci5 W200FM-S3 to the vehicles original mounting location. Contact your retailer or visit
www.audiotec-scher.com/compose for an up-to-date overview of available adaptors.
These notices do not aect the buyer’s statutory rights in case of defects against the seller. Damage caused by improper installation, incorrect electrical connection,
overload, voltage spikes in the vehicle electrical system, improper use, modications not approved by the manufacturer or failure to observe this user manual is not
covered by any services exceeding the statutory liability for defects. For service inquiries, please contact your dealer or our support and provide proof of purchase
and a description of the fault. To help prevent transport damage, please use the original packaging if possible or other suitable transport-safe packaging. Technical
changes, misprints and errors reserved. Mandatory statutory liability remains unaected.
Service information
Disposal information
This symbol means that the product must not be disposed of with unsorted household waste. At the end of its service life, take it to a designated collection or return
point for waste electrical and electronic equipment. Proper disposal of waste equipment helps to prevent environmental and health damage.
AUDIOTEC FISCHER GmbH
Hünegräben 26 - 28
57392 Schmallenberg
Germany
Made in China
Trademarks
KLIPPEL
®
is a registered trademark of Klippel GmbH. Other trademarks and trade names are those of their respective owners.
