P7 Handheld controller
Product Specification
Product Name: P7 Handheld controller
File version: V1.0
1 Product Design Sketch
Figure 1 Product rendering
2 Product Technical Specifications
2.1 General Overview of Technical Specifications
Product Type
Chinese Version
Global Version (Excluding China)
PDA
BT2.1+EDR/3.0/4.1+HS
BT2.1+EDR/3.0/4.1+HS
WiFi
802.11 a/b/g/n/ac
802.11 a/b/g/n/ac
network
4G network coverage across all
carriers, including China Mobile,
China Unicom, and China Telecom
4G network coverage across all
carriers, including China Mobile, China
Unicom, and China Telecom
Sim card slot
Dual Nano SIM
Dual Nano SIM
TF card slot
Supports up to 512GB MicroSD
expansion
Supports up to 512GB MicroSD
expansion
running
memory
6GB (8GB available)
6GB (8GB available)
Storage
memory
128GB (256GB available)
128GB (256GB available)
pilot lamp
3
3
key
76
76
electronic
blister
support
support
electronic
compass
support
support
camera
13-megapixel rear main camera
8MP rear macro camera
flash lamp
13-megapixel rear main camera
8MP rear macro camera
flash lamp
GNSS
GPS：L1 C/A GLONASS: G1
BeiDou: B1I, B1C
GPS：L1 C/A GLONASS: G1
BeiDou: B1I, B1C
Single-point positioning, no original
data output
Single-point positioning, no raw data
output
2.2 Detailed technical specifications
2.2.1 Physical Properties
Size
179.5*290.5*28.0mm
Weight
820g
Working
Temperature
-30 °C to +60 °C
Storage
Temperature
-40 °C to +80 °C
Water and dust
resistance rating
IP67
Humidity
5%-95%, non-condensable
Decline
1.5 meters fall
2.2.2 System Platform
Operating system
Chinese version: Android 14,8-core
2.2GHz
Global version: Android 14,8-core
2.2GHz
Running memory
6GB LPDDR4X (8GB LPDDR4X optional)
Memory
128GB (256GB available)
External storage
Supports up to 512GB
2.2.3 Interface Communication
Display screen
7.0-inch AMOLED HD touch screen
Key
76 keys, 3 indicator lights, detailed definitions in Chapter 3
Junctor
Standard Type-C for charging and data transfer
Communication
Bluetooth: BT2.1+EDR/3.0/4.1+HS
WiFi：2.4G/5G, 802.11 ac/a/b/g/n
Network
China version:
GSM:900/1800
WCDMA:B1/B5/B8
LTE-
TDD:B34/B38/B39/B40/B41
LTE-FDD:B1/B3/B5/B8
Global version:
GSM: 850/900/1800/1900
WCDMA:B1/B2/B4/B5/B8
LTE-TDD:B38/B39/B40/B41
LTE-FDD:
B1/B2/B3/B4/B5/B7/B8/B12/B13/B17/B20/B
28
Other interfaces
External memory card slot
External SIM card slot
2.2.4 Power Supply Parameters
Internal battery
3.8V, 10400mAh, 39.52Wh
Charging voltage
DC 5V3A / 9V2A
Adapter
Type-C PD adapter
Operate time
More than 15 hours
3.1 Operation Guide
3.1Key definition
Figure 2 Keyboard Layout
Number Key Function declaration
1 Special function key F1-F10 can be customized by users in Settings.
2 Navigation key Return to Desktop> Multitasking> Menu
3 Direction key Use the up, down, left, or right arrow keys to move the
cursor or positioning point. Press the confirm key.
4 Eject key Exit/Return
5 Fn key Press and hold Fn to activate the function indicated by the
brown icon on the keyboard
6 Digital keypad area Enter a number, decimal point, or minus sign
7 Alphabet Keyboard input alphabet
8 Tab key Tab key to go back to the previous location or move the
input focus to the previous control
9 Tab key Press Tab to move to the next location or shift the focus to
the next control
10 Measurement key You can customize features in Settings.
11 Photo key Turn on the camera to take photos
12 Utility key You can customize features in Settings.
13 Backspace key Delete the last character in the input box
14 Power switch Power on, off, sleep, or wake
15 Ctrl key Use the Control key with other keys for quick actions
16 Shift key Case switching
17 Space bar Enter a space
18 Comma Enter a comma
19 Full stop Enter a period
20 Right slash Enter division or a delimiter
21 Carriage return Enter new line
3.2Indicator definition
Figure 3: Indicator light position
Indicator status
Indicator definition
The green indicator light 1 is
flashing.
Charging
The green indicator light 1 is
always on
Charge complete
The red indicator light 1 is
always on
Low battery
The green indicator light 2 is
always on
Bluetooth is
connected
The green indicator light 3 is
always on
WiFi is connected
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.
The device are restricted to indoor operation only in the band 5150-5250 MHz.
IC warning statements:
-English Warning Statement:
RSS-GEN ISSUE 5, 8.4 User manual notice
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s license exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
-French Warning Statement:
RSS - Gen version 5, 8.4 avis du manuel de l'utilisateur
Cet appareil contient un émetteur / récepteur sans licence conforme au RSS sans
licence d'innovation, science et développement économique Canada.L'opération doit
satisfaire aux deux conditions suivantes:
Cet équipement peut ne pas causer d'interférence.
L'équipement doit accepter toute interférence, y compris toute interférence qui
pourrait entraîner un fonctionnement indésirable de l'équipement.
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment and meets RSS-102 of the IC radio frequency (RF)
Exposure rules. This equipment has very low levels of RF energy that are deemed to
comply without testing of specifc absorption ratio (SAR).
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées
pour un environnement non contrôlé et respecte les règles d’exposition aux
fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie
RF très faible qui est considérée conforme sans évaluation du débit d’absorption
spécifque (DAS).
The device are restricted to indoor operation only in the band 5150-5250 MHz.
FCC Warning:
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device is
designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF)
energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard
operating positions accepted by the FCC with the EUT transmitting at the specified power level in
different channels. The FCC has granted an Equipment Authorization for this device with all
reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR
information on this device is on file with the FCC and can be found under the Display Grant
section of www.fcc.gov/oet/ea/fccid.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
