Product Instructions
Product No. 1013247
EXTENDABLE
STAINLESS STEEL
DISHRACK
2 3
Need further help?
suppor[email protected]
See our full range at
www.vonhaus.com
Let’s get started!
Visit our product hub for
useful tips and tricks on
getting the most out of
your new product.
SCAN ME
Components
A
B
C
4 5
Assembly
1
Assembly
2
Prepare the dish rack
Place the dish rack (A) on a flat surface. Pull out
the drain channel, then rotate and remove it to set
the rack in its working position.
Attach the plate rack
Take the plate rack (B) and lower it into the main
rack, pressing it down into the plastic clips on ei-
ther side until it sits flat and secure.
A
B
6 7
Important Safety Notice
This product is not suitable for use by children
or by individuals with physical, sensory, or
mental impairments that may limit their ability
to operate the equipment safely, unless they
have been given supervision or instruction
concerning the safe use of the product by a
person responsible for their safety.
General Safety
This rack is designed to hold up to 10 plates,
8 bowls, 4 mugs, and around 15 pieces of
cutlery — try not to overload it, as this could
cause it to become unstable.
Always place the rack on a flat, stable surface
well away from the edge of the worktop. Take
care when handling the wire plate insert, as
the wire ends can be sharp.
This product is not a toy — please keep it out
of reach of young children. Check the plastic
clips from time to time, and stop using the rack
if any appear damaged or broken.
Maintenance
The wire rack components are made from high-
quality stainless steel, which resists rust
and is
safe for use in kitchen environments.
Wipe down regularly with a damp cloth and
a small amount of washing-up liquid to keep
the rack clean and free from limescale or soap
build-up.
Avoid abrasive scrubbers or harsh cleaning
products, as these can scratch and dull the
surface. The plastic draining tray and utensil
holder can simply be rinsed under the tap.
Do not use bleach. Hand wash only.
InformationAssembly
3
Add the utensil holder
Slide the utensil holder (C) onto the side of the
rack, hooking it into the channel on the rim until it
clicks into place.
C
8 9
Customer Service
If you are having difficulty using this product
and require support, please contact
suppor[email protected]
Warranty
To register your product and find out if you
qualify for a free extended warranty please
go to www.vonhaus.com/warranty
Please retain a proof of purchase receipt or
statement as proof of the purchase date.
The warranty only applies if the product is used
solely in the manner indicated in the warnings
page of this manual, and all other instructions
have been followed accurately.
Any abuse of the product or the manner in
which it is used will invalidate the warranty.
Returns
Returned goods will not be accepted unless
re-packaged in its original packaging and
accompanied by a relevant and completed
returns form. This does not affect your statutory
rights.
No rights are given under this warranty to a
person acquiring the appliance second-hand
or for commercial or communal use.
Copyright
All material in this instruction manual are
copyrighted by DOMU Brands.
Any unauthorised use may violate worldwide
copyright, trademark, and other laws.
Thank You
Thank you for purchasing your product/
appliance.
Should you require assistance with your
purchase, please contact us at
suppor[email protected]
Vonshef is a registered trademark of DOMU
Brands Ltd.
Made in China for DOMU Brands Ltd.
Unit 30, Stakehill Industrial Estate
Middleton, Manchester, M24 2RW
EU Authorised Representative
Authorised Representative Service
77 Camden Street Lower
Dublin, D02 XE80
Ireland
Information
Product No. 1013247
Let’s get started!
Visit our product hub for
useful tips and tricks on
getting the most out of
your new product.
SCAN ME
