SR����
Wearable Computer
Quick Start Guide
SR���� Overview
Device & Trigger
Charging Dock
Charging Dock
Press and hold the power button, wait until the device vibrates to complete the
power on or power off.
Equipped the device with the single trigger , it can be worn on the finger and triggered
with the thumb. By adjusting the installation method of the ring trigger, it can be used
on either the left or right hand.
Charging Dock POGO PIN
Trigger POGO PIN
Loudspeaker
Host display screen
Release latch
Release latch
Camera or Distance sensor
Function
�.��.���.�����
Device x 1 Charging Dock x1
Single Trigger x1 (optional) Gloves x1 (optional)Charger x1
Data cable x 1
Watch strap x 1(optional)
Quick Start Guide &Warranty Instructions & Certificate of Conformity x 1
Packing List
Scanner
Trigger
Finger Strap
Trigger
Power button
USB Type-C
Trigger assembly
Install the Trigger
Use on the Left-hand Use on the Right-hand
Getting Started
Power On & Power Off
Charging Instructions
Refer to the diagram below, place the device on the charging dock, connect the
Type-C data cable to the charging port.Then turn on the power to charge the
device.
Table of Toxic and Hazardous Substances and Content
PBBCdHgPb
OO O O OOOOX O
OO O O OOOOX O
OO O O OOOOX O
Cr(VI)
This form is prepared in accordance with the provisions of SJ/T 11364.
PBDE
This logo refers to the period ( 10 years ) during which the toxic or hazardous
substances or elements contained in electronic information products will not
leak or mutate so that the use of these [substances or elements] will not
result in any severe environmental pollution, any bodily injury or damage to
any assets. Due to different models, the product may not include all of the
above components other than the main unit, so please refer to the actual
sales configuration of the product.
Part
Host
Adapter
USB cable
DEHP BBP DBP DIBP
Toxic and hazardous substances or elements
O : Indicates that the content of the hazardous substance in all homogeneous materials
of the component is below the limit requirements specified in GB/T 26572.
X : Indicates that the content of the hazardous substance in at least one homogeneous
material of the component exceeds the limit requirements specified in GB/T 26572, and
currently there is no mature alternative in the industry, in compliance with the
environmental requirements of the EU RoHS directive.
Ba�ery Safety Guidelines
1. The area in which the units are charged should be clear of debris and combus�ble
material or chemicals. Par�cular care should be taken where the device is charged in
non-commercial environment.
2. Follow ba�ery usage, storage, and charging guidelines found in the user’s guide.
3. Improper ba�ery use may result in a fire, explosion, or other hazard.
4. To charge the mobile device ba�ery, the ba�ery and charger temperatures must be
between0℃and +40℃.
5. Do not use incompa�ble ba�eries and chargers. Use of an incompa�ble ba�ery or
charger may present a risk of fire, explosion, leakage, or other hazard.
6. For devices that u�lize a USB port as a charging source, the devise shall only be
connected to products that bear the USB-IF logo or have completed the USB-IF
compliance program.
7. Do not disassemble or open, crush, bend or deform, puncture, or shred.
8. Severe impact from dropping any ba�ery-operated device on a hard surface could
cause the ba�ery to overheat.
9. Do not short circuit a ba�ery or allow metallic or conduc�ve objects to contact the
ba�ery terminals.
10. Do not modify or remanufacture, a�empt to insert foreign objects into the
ba�ery, immerse or expose to water or other liquids, or expose to fire, explosion, or
other hazard.
11. Do not leave or store the equipment in or near areas that might get very hot, such
as in a parked vehicle or near a radiator or other heat source. Do not place ba�ery
into a microwave oven or dryer.
12. Ba�ery usage by children should be supervised.
13. Please follow local regula�ons to promptly dispose of used re-chargeable
ba�eries.
14. Do not dispose of ba�eries in fire.
15. Seek medical advice immediately if a ba�ery has been swallowed.
Precau�ons
1. Read all informa�on in this guide before using the device to ensure safe and
proper opera�on.
2. Please use the accessories that have been approved by this manufacturer and
corresponds to this model.Use of any power source,charger,ba�ery,etc.That has not
been approved by this manufacturer may cause a fire,explosion, or other hazards.
3. Please use device and accessories within the specified temperature range.
Equipment failure may occur when the ambient temperature is too high or too low.
4. Do not disassemble the product and its accessories.If the equipment or any of its
components are not working properly,consult the a�er-sales service of the company
promptly,or send the equipment to the a�er-sales service outlet for tes�ng and
maintenance.
5. The ba�ery is made from a flammable and explosive material.Do not disassem-
ble,squeeze,drop and make any other destruc�ve apera�ons on the ba�ery.Do not
place the ba�ery in high temperatures.
6. Disposal of used ba�eries is subject to local relevant documents or policies
regarding disposal of used ba�eries.
Warranty Policy
Thank you for using intelligent terminal series products. In the situa�on of quality
problems, which arise from raw materials or produc�on processes, during normal
use of purchased products, the seller will be responsible for free maintenance within
one year from the date of purchase.
The company may provide repairs due to the user's failure to use the product
according to the provided instruc�ons of the product. However corresponding
service fee and component fee will be charged.
Warranty regula�ons:
1. Under normal circumstances, the warranty period of the device is 12 months (3
months for accessories), subject to the sales agreement.
2. During the product warranty period, under the normal use condi�ons (determined
by our technical staff), the user will be en�tled to a free warranty for damaged or
faulty warranty parts.
3. During the warranty period, faults caused by repair , disassembly or modifica�on
of the product by a personnel other than our company improper installa�on,
improper use by the user (failure to follow instruc�ons), serial number damage,
accident or natural disaster, will not be covered under the warranty
4. The warranty will expire immediately if any altera�ons are made to the warranty
card.
5. Please show the equipment SN and purchase cer�ficate for repair. The company
reserves the right to interpret the above contents.
.
Note: The contents of the manual are subject to change without prior no�ce.
Place of Origin:
Zhu hai
Quality Inspector:
02
UROVO PTE. LIMITED
Add: 1 Raffles Place, #21-01 One Raffles Place
Tower 1, Singapore 048616
Website:en.urovo.com
16. In the event of a ba�ery leak, do not allow the liquid to come in contact with the
skin or eyes. If contact has been made, wash the affected area with large amounts of
water and seek medical advice.
Step 1:
Align the trigger with the locking
end of the device.
Step 2:
Press the latch，then press the
trigger downward until the trigger
is fixed.
Step 2:
Lift the trigger upward to complete
the disassembly.
Step 1:
Press the locks on both ends of the
device.
Remove the Trigger
5150-5250MHz indoor use only
FCC Statement
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device has been tested and meets the FCC 10g 4.0W/kg limb SAR limit.
When in face-up mode, it must be at least 10 mm away from the human body, and it has been tested to meet the limit of 1.6 W/kg.
