7-in-1
Qi2 25W Wireless Charger
Instrucon Manual
Product Components
Product Introducon
1. This product supports magnec wireless charging for iPhone17-12
series and wireless charging for other mobile phones, earphones and
watches that meet the Qi2 standard.
2. The mobile phone supports a maximum of 25W wireless charging,
the earphones support a maximum of 5W wireless charging, and the
Apple Watch support a maximum of 2.5W wireless charging.
3.The surface of the product is made of ABS + PC + aluminum alloy
materials.
4.Mulple strong magnets are arranged to firmly aach the mobile
phone.
5.The magnec charging posion for the mobile phone can be
rotated 50° up and down to adjust the viewing angle of the mobile
phone.
1. Connect the adapter to power on, and the white indicator light
stays on for 3 seconds and then goes out.
2. Place the device in the corresponding charging area to start
charging. Please select a suitable adapter according to the
requirements of your charging device. When charging mulple devices
simultaneously, to avoid the situaon where the charging device
cannot enter the fast charging mode or has unstable charging due to
insufficient input power of the adapter, it is r-ecommended to use an
adapter with a power of 45W or above.
3. *When power on, The power indicator light turn on for 1 seconds
then off
*When standy mode, The power indicator light off
*When charging, The power indicator light breathers 5 seconds then off
*When fully charged, The power indicator light off
*When meet FOD, flashing on for 200ms and off for 200ms
4. The touch switch at the boom controls the switch and brightness
of the ambient light. Touch it once to turn on the light (high
brightness) -medium brightness -Iow brightness-off, and it cycles
connuously.
5. Foreign Object Detecon: When a metal or magnec object is
placed on the wireless charger, the indicator light blinks in red.
6. If the mobile phone/earphones/watches cannot be charged
normally, please move them slightly to find the correct charging
posion.
1. The suitable working temperature range of this product is
between-10°C and 45°C. When in a high-temperature environment,
the wireless charging efficiency will decrease. When using it in cold
regions, please ensure that the ambient temperature is higher
than-10°C, otherwise the wireless charger may not work properly.
2. During the process of charging the mobile phone, the wireless
charger may generate heat, which is a normal phenomenon.
3.Do not disassemble this product without permission.
4. To ensure the service life of the product, when performing wireless
charging, please do not place metal objects, magnec objects, etc. on
the wireless charging device.
5.Do not place the product in water to avoid damage caused by water
ingress.
6.Try to avoid making the product work at full load as much as possible
to prevent affecng the charging efficiency.
Product Parameters
Product Parameters
Cauons
Packing list
1* 7-in-1 Qi2 25w Wireless Charger Stand
1*Type-C to C charging cable,1M
1* User manual
FCC Statement
Power Split Technology with different
Charger Adapter:
30W PD charger adapter power distribuon table PD:12V/2.5A
TEC Cooling Fan
7W(Input)
7W
NA
NA
7W
MPP Mobile
Phone
15W
NA
NA
14W
10W
5W
7W
Watch
NA
NA
2.5W
NA
NA
2.5W
Earphone
NA
NA
5W
NA
NA
3W 7W
EPP10W
Mobile Phone
NA
10W
NA
NA
10W
10W
36W PD Charger Adapter Power Distribuon Table PD: 12V/3A
MPP Mobile
Phone
EPP10W
Mobile Phone
Watch Earphone
TEC Cooling Fan
7W(Input)
24W
NA NA NA 7W
NA
NA
10W NA NA NA
NA 2.5W
5W
NA
19W NA NA NA 7W
15W
10W
10W NA NA 7W
2.5W 3W 7W10W
45W PD Charger Adapter Power Distribuon Table PD:15V/3A
MPP Mobile
Phone
EPP10W
Mobile Phone
Watch
Earphone
TEC Cooling Fan
7W(Input)
25W NA NA NA 7W
NA
NA
10W NA NA NA
NA 2.5W
5W
NA
25W NA 2.5W 3W 7W
24W
19W
10W NA NA 7W
2.5W 3W 7W10W
Magnec Charging Posion
for MobilePhones (Output:25W)
Apple Watch charging
locaon (Output:2.5W)
LED Ambient Light
LED Ambient
Light Switch
TEC Semiconductor Cooling
Fan (Output:7W)
Earphones charging
locaon 3w/5w Max (Output: )
Cooling Fan Switch
Power Indicator Light
Mobile Phones Earphones
charging locaon :10W) (Output
This device complies with part 15 of the FCC Rules. Operaon is subject
to the following two condions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operaon.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protecon against
harmful interference in a residenal installaon. This equipment
generates,uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instrucons, may cause
harmful interference to radio communicaons. However, there is no
guarantee that interference will not occur in a parcular installaon.
If this equipment does cause harmful interference to radio or television
recepon, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modificaons
not expressly approved by the party responsible for compliance. such
modificaons could void the user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC's RF exposure guidelines, the distance
must be at least 20 cm between the radiator and your body, and fully
supported by the operang and installaon configuraons of the
transmier and its antenna(s).
FCC ID:2BETZ-IW39
Product Model: iw39
Input Interface: Type-C
Input Power: 12V 3.75A,15V 3A,20V 3.25A
(45W/65W Charger Adapter)
Output for Mobile Phones: 25W/15W/10W/7.5W/5W
Output for iWatch: 2.5W
Output for Earphones: 3W/5W (Max)
Output for TEC Cooling Fan:7W
Product Standard: Qi2 25W Standard
65W PD charger Adapter Power Distribuon Table PD:20V/3.25A
MPP Mobile
Phone
EPP10W
Mobile Phone
Watch Earphone
TEC Cooling Fan
7W(Input)
25W
NA NA NA 7W
NA
NA
10W NA NA NA
NA 2.5W 5W NA
25W
NA 2.5W 5W 7W
25W
25W
10W NA NA 7W
2.5W 3W 7W10W
Remark: For a beer user experience, it is recommended to use
65W Charger Adapter
