24LH 04/2023 AR
STEEL FIREWOOD LOG HOOP
QX24LH
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.
Assemble components on a soft, clean surface to avoid damaging the nish.
Page 1 / 2
Purchase Date: / / Order/Customer Reference Number:
No. Parts Qty.
A
Side Panel 2
B
Top Bracket 1
C
Side Bracket 2
D
M6x30mm Bolt 6
E
Washer 6
F
Lock Nut 6
G
Spanner 1
H
Phillips Hex Key 1
CHOKING HAZARD — This item contains small
parts that can be swallowed. Keep children and pets
away during assembly.
WARNING
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement
parts or products can be requested within the 1-year warranty period. Proof of purchase must be provided. This
includes the date of the purchase as well as photos of the product defect. Photos are used to determine the cause of
the defect and to provide future quality control. The request will be reviewed, and replacement pieces will be sent at
our discretion. For warranty information, visit https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact
24LH 04/2023 AR Page 2 / 2
ASSEMBLY
Review all information and understand assembly before beginning.
• Place log rack on a hard, dry surface.
• Do not overload the log rack — holds approximately 1/8 face-cord of firewood.
• Ensure fittings are tight before use. Periodically check and tighten hardware as necessary.
• Protect the unit from outdoor elements with a cover. Cover not included.
• Do not allow children to play with or around the log rack.
SAFETY STATEMENTS & WARNINGS
Any modication to the product or failure to follow recommended care will void the product warranty.
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
1. Insert one M6x30mm Bolt (D)
into the top of Side Panel (A).
Repeat for the remaining panel.
2. Loosely secure the top of log
hoop using Top Bracket (B),
two Washers (E) and two Lock
Nuts (F), as shown.
3. Align Side Brackets (C) with
the sides of the hoop and
secure using M6x30mm Bolts
(D), Washers (E) and Lock
Nuts (F).
4. Tighten all hardware using
included Spanner (G) and
Phillips Hex Key (H).
TIP: To tighten the hardware more
quickly, turn the screwdriver in the bolt
head clockwise while simultaneously
turning the spanner on the lock nut
counterclockwise.
Nylon
Insert
IMPORTANT: Lock nuts must be installed with the nylon insert on the outside.
Tools are required to fully tighten lock nuts, failure to properly tighten the lock nuts may
result in product malfunction or personal injury.
