Page 1 / 4 TF-9766S-U-S
WARNING!
CHOKING HAZARD — This item contains small parts that can be swallowed. Keep children away during assembly.
STEEL U
-
SHAPE HANGING CHAIR STAND
TF-493
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
This chair stand is not designed
for use as a swing. Bouncing,
swinging, or any other signicant
movements while in use may
cause serious injury.
This stand must be on a level,
stable surface. Make sure all
hardware is securely tightened
before each use.
Weight Limit: 330 lbs.Weight Limit: 330 lbs.
CAUTION
1 Top Pole 1
2 Bottom Pole 1
3 Left Base Pole 1
4 Right Base Pole 1
A Wrench 1
B Hex Key 1
C Extension Spring 1
D Pin 1
E Long Bolt Set 1
F Short Bolt Set 6
G Foot 8
S Washer 12
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at htt ps://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/Sunnydaz eContact
Purchase Date: / / Order/Customer Reference Number:
06/2020
Page 2 / 4
Carefully snap Foot (G) onto the base, ensuring they
are evenly spaced.
Place Bottom Pole (2) onto the base.
Use 4x Short Bolt Set (F) and 8x Washer (S) to secure
the pole to the base.
ASSEMBLY
Align Left Base Pole (3) and Right Base Pole (4).
Use 2x Short Bolt Set (F) and 4x Washer (S) to
connect the base poles.
STEP 1 STEP 2
TF-9766S-U-S
A
F S
B
F
3
4
F
S
F
A
B
2
G
06/2020
Page 3 / 4TF-9766S-U-S
1
A B
EE
D
C
STEP 3 STEP 4
Place Pin (D) into the top pole. Hook the Extension
Spring (C) through the bottom of Pin (D).
Slide Top Pole (1) onto the bottom pole, ensuring the
holes are aligned.
Use 1x Long Bolt Set (E) to connect the poles.
06/2020
TROUBLESHOOTING
• If the stand feels unstable, make sure it is on a level surface and the feet are correctly and evenly distributed.
• If the stand is making noise when in use, check to make sure all hardware is fully tightened.
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,
Page 4 / 4
USE & CARE
Under normal use, Sunnydaze hammock chair stands will last for years.
It is important to follow basic use & care tips to prolong the life of your stand.
• SAFE USE: Do not use this chair stand for swinging, bouncing, jumping, twisting, or other excessive
movements; doing so may cause serious injury, including, but not limited to, the stand tipping over.
• CHILDREN: Supervise children at all times. Do not allow children to play on or sleep in any hanging chair.
Chair not included.
• INSPECTION:
Ensure the stand is assembled correctly and all hardware is securely tightened before each use.
• CLEANING: Use a soft cloth, warm water and soap to wipe down the stand if necessary. Dry the stand after
cleaning to prevent rust.
• SCRATCHES: The powder coating on the stand is tough and durable but, even under normal use, some
scratching is inevitable. To avoid excessive rust, wipe these areas as needed to remove moisture.
• STORAGE: Store the stand indoors when not in use. Cool, dry locations are recommended to prevent
damage and rust that may result from exposure to moisture.
TF-9766S-U-S
• Do not exceed the weight capacity: 330 lbs
• Do not swing, bounce, jump, twist, or spin in any hanging chair while using this stand. This stand was designed for
sitting calmly in an hanging chair. Chair not included.
• Sunnydaze Hanging Chair Stand is intended to be used by one person
at a time.
• This chair stand must be used with all provided parts. Install all parts
in accordance with the assembly instructions.
• Ensure all hardware is properly installed and securely tightened before
each use.
• Always inspect the stand and hardware for damage before each use.
• Do not allow children to use this product without adult supervision.
• When in use, the chair (not included) should remain inside the base
area at all times. A diagram of the base area is shown on the right.
SAFETY STATEMENTS & WARNINGS
06/2020
