2
① This product is only for indoor household use. Avoid direct sunlight, proximity to high-
temperature sources, and humid environments;
② Do not jump or step on the mattress. Avoid sharp objects (such as scissors, keys) scratching
t
he fabric or piercing the internal adjustment module;
③ Before cleaning the mattress or moving its position, you must first disconnect the power
s
upply. Live operation is prohibited.
Remote Control Use: When operating the remote control, press the buttons sequentially. Avoid
pressing multiple buttons at the same time to prevent damage to the air pump.
FD Remote Base 3 User Manual
Product Overview
This product is a high-end healthy sleep system integrating firmness adjustment and innovative
water wave massage. By dynamically optimizing support and massage rhythm, it integrates vital
sign monitoring, zoned heating, and sleep report analysis. It aims to optimize your sleep quality
through technology and bring convenience and health to your life.
Core Functions: Firmness Adjustment, Water Wave Massage, Vital Sign Monitoring, Heating
Temperature Control.
Intelligent Control: You can control the smart bed through multiple methods such as remote
control, Tuya App, WeChat Mini Program, and smart speaker.
Safety Precautions
To ensure your safety, please carefully read and always comply with the following regulations
before use.
1.Electrical and Operational Safety
Power Supply Check: Before connecting to the power supply, please confirm that the voltage
meets the product requirements and that the power cord and plug are intact.
Operational Taboos:
2.Personnel and Maintenance Safety
Children and Pets: Please keep the remote control out of the reach of children. Children must
use this product under adult supervision.
Cleaning and Maintenance: Before cleaning or maintenance, please be sure to unplug the
power plug. Do not use strong chemical agents (such as gasoline, diesel) to clean the bed. For
general dust, wipe with a dry cotton cloth.
3
Installation and initialization
Unboxing Inspection: After opening the package, please first check if there is any collision
damage to the product appearance, and count all accessories against the product accessory list
to ensure completeness.
Assembly Requirements: At least two people are required to cooperate during the assembly
process. Do not pull or drag forcefully. When flipping the bed, do not use the bed legs as a
single support point. Please install strictly in accordance with the diagrams in the manual or the
instructional video.
Power Connection and Debugging: After installation, install the control box in the designated
position and connect the cables and power supply. After turning on the power, use the remote
control to initially check whether all functions such as firmness adjustment, water wave massage,
and heating are operating normally.
Button Usage Instructions
After the device is powered on, the buttons next to the Mattress will light
up and vibrate, then turn off.
Press and hold the [+] button next to the Mattress to adjust the mattress
firmness，release to stop.
Press and hold the [-] button next to the Mattress to adjust the mattress
softness，release to stop.
Remote Control User Guide
1.Pairing
Within 5 seconds of powering on the device, press and hold the [Pairing] button for 3-5 seconds
to pair. The indicator light will flash and then turn off, indicating successful pairing. After
successful pairing, you can use the remote control to adjust the device.
If pairing fails for more than 5 seconds, please restart your device and pair again.
Once paired, you can use the remote control to operate the device.
Non-Professional Disassembly: It is strictly prohibited for non-professionals to disassemble the
structural components, wiring harnesses, or control box of the electric bed without authorization,
as this may cause irreparable damage.
4
2.Usage
• Device Initialization: After powering on, the device will
automatically initialize for approximately 30 seconds to 2 minutes.
Do not operate the device during initialization.
• : One-Touch All Off, Press to stop firmness adjustment and
turn off water wave, heating, etc.
• L Firm: Short press to continue firming up the left bed; short
press again to stop. Long press to firm up the left bed; stop when
released. The adjustment stops automatically when adjusted to
maximum firmness.
• R Firm: Short press to continue firming up the right bed; short
press again to stop. Long press to firm up the right bed; stop
when released. The adjustment stops automatically when
adjusted to maximum firmness.
• L Soft: Short press to continue softening the left bed; short press
again to stop. Long press to soften the left bed; stop when
released. The adjustment stops automatically when adjusted to
maximum softness.
• R Soft: Short press to continue softening the right bed; short press again to stop. Long press
to soften the right bed; stop when released. The adjustment stops automatically when
adjusted to maximum softness.
• Heat: Press briefly to activate heating (default: 2 hours, Medium intensity). Long press to turn
off heating. (only available on S-G02-r*)
• Anti-mite: Press briefly to activate anti-mite function (30 minutes), Long press to turn off
mite removal. (only available on S-G02-r*)
• MEM: Long press to save the current firmness value of the mattress; short press to restore
the saved mattress firmness value.
• L Vibrate/R Vibrate: Press briefly to activate left side/right side vibration massage (default:
15 minutes, Medium intensity). Long press to turn off vibration massage. All three indicator
lights will flash three times.
5
1.Add Device
① Search for "Tuya" in your app store to install the app.
Register/Log in to your Tuya account.
② Power on the device. Open the Tuya App, tap the "+" on the home screen to enter "Add
Device".
③ Tap on the detected "Smart Mattress" to configure Wi-Fi settings. Follow the prompts to
select your Wi-Fi network and enter the correct password, Tap "Next".
④ Once the device is successfully connected to the network, it will appear in the device list
under "Home".
Tuya App User Guide
2.Device Control
In the "Home" section, tap "Smart Mattress" to enter the control
interface.
• Device Initialisation: After powering on, the device
automatically initialises for approximately 30 seconds to 2
minutes (including initialisation of the Mattress frame and
firmness adjustment airbags). Please do not operate the device
during initialisation.
• One-Touch All Off: Press to stop firmness adjustment, turn off
wave massage, vibration massage, heating, etc., and reset the
Mattress frame (Smart Wake-Up function is retained)
2.1 Left/Right Side Control
• Real-time Vital Signs: View real-time heart rate and breathing
data, please wait about 8 seconds for data to appear. (only
available on S-G02-v*)
6
• Soft Adjustment: Tap to enter the adjustment page.
• Tap once on "Firmer" or "Softer" to start automatic adjustment; tap again to stop.
Press and hold for real-time adjustment, release to stop.
• Tap "Soft", "Medium", or "Hard" to adjust continuously to the preset firmness level.
• Massage: Turn on massage. Default settings: Mode "M1", Intensity "Medium", Duration "15
minutes". Tap to enter the next page to switch mode, intensity, and duration. Massage stops
after the timer ends.
• Heat : Turn on heating. Default settings: Intensity "Medium", Duration "2 hours". Tap to
enter the next page to switch intensity and duration. Heating stops after the timer ends.
Note: (only available on S-G02-r*)
• Heating and Anti-Allergy modes cannot be active simultaneously. Starting one
function will automatically turn off the other.
• Prolonged heating may cause low-temperature burns. Use with caution.
• Sleep Analysis: A sleep report is generated after nightly sleep exceeding 3 hours. The
following day, after waking, tap "Generate Report" to upload data from the Mattress to the
cloud. Tap the module to view sleep reports. You can switch between daily, weekly, and
monthly views, and switch between Mattresss if applicable. (only available on S-G02-v*)
3.Remove The Device
① From the Smart Mattress control screen, tap the ":" in the upper right corner to enter Device
Details.
② Scroll to the bottom of the page and tap "Remove Device".
Note: The first person to bind the device has the highest permissions. Others cannot scan and
add the device. The primary user can enter Device Details, tap "Share Device" to share it with
other Tuya accounts for adding.
4.Force Remove The Device
If the primary user is unavailable to remove the device, you can use the remote control to force
remove the Tuya-device. Follow these steps:
Press and hold for 3-5 seconds， Immediately after releasing it, press and hold the Heat
Button for another 3-5 seconds.
After the device is removed, it will be detectable in the Tuya App under the "Add Device"
function.
2.2 All Side Control
• Soft Adjustment: Click to proceed to the next page to control the entire side. Please refer to
"2.1 Left/Right Side Control".
• Anti-mite: When enabled, the Mattress heats for 30 minutes for anti-allergy purposes.
Heating and Anti-Allergy modes cannot be active simultaneously. Starting one function will
automatically turn off the other.(only available on S-G02-r*)
7
1.Add Device
① WeChat Search for the "国宝智能床垫" mini-program, or scan the mini-program QR code
provided.
② Enter the mini-program. In the "Control" section, tap "Add Device" to search for nearby
Bluetooth devices.
③ From the list of detected devices, tap your target device (Please stand near the device to
ensure it is detected).
④ You will enter the device binding interface. Tap "Add Device" to confirm.
Mini-Program User Guide
2.Device Control
The control method is the same as that of the Tuya App. Please refer to the Tuya App User
Guide in the previous chapter.
3.Remove The Device
① From the Smart Mattress control screen, tap the ":" in the upper right corner to enter Device
Details.
② Scroll to the bottom of the page and tap "Remove Device".
Note: The first person to bind the device has the highest permissions. Others cannot scan and
add the device. The primary user can enter Device Details, tap "Share Device" to share it with
other Tuya accounts for adding.
8
Warranty Policy: This product is covered by a warranty from the date of purchase . Please refer
to your warranty card or consult customer service for the specific warranty period. Please note
that the following situations are generally not covered under warranty:
①Unauthorized opening or alteration of the control box, motor, or remote control.
②Damage caused by human error or failure to use as instructed.
③Use in abnormal environments (such as extreme humidity or high temperature).
Service Support: If the problem persists after self-checking, or if the product requires repair,
please contact our after-sales service. Please provide the product model and purchase date so
we can provide you with faster service.
Friendly reminder: The contents of this manual will be updated with product firmware upgrades.
Please refer to the latest version of the manual or the instructions within the app for your
purchased product. Enjoy using our product!
After-sales service and warranty
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.
