STEALTH SPINNER
8+
Pairing
1. Place the drone on a level and solid surface to ensure a steady takeo.
2. Press the power button on the remote control to power on the remote
control. The status light on the remote control will fade on and o slowly
to indicate the remote control is in pairing mode and ready to pair with the
drone.
3. Slide the power switch on the drone to the on position to power on the
drone. The status light on the drone will fade on and o to indicate the
drone is in pairing mode and ready to pair with the remote control.
4. Push the left stick forward and quickly backward to pair the remote
control to the drone. Once successfully paired, the status lights on the
remote control and drone will both remain solidly lit.
5. If the remote control and drone do not pair successfully within 60 seconds,
both the remote control and drone will enter sleep mode. Power o and
power on both the remote control and drone to retry the pairing process.
6. If the connection between the remote control and drone is interrupted, the
remote control and drone will automatically enter pairing mode and
attempt to pair again. The indicator lights on the remote control will begin
to fade on and o and then will remain solidly lit when paired again. If the
indicator light on the remote control does not begin to fade on and o,
either the remote control or drone has not entered pairing mode, and they
will not automatically pair again. Power o and power on both the remote
control and drone to retry the pairing process. If the indicator light on the
remote control does not power on, change the batteries in the remote
control. If the indicator light on the drone does not power on, recharge the
drone.
7. If there is no input on the remote control for 5 minutes, the remote control
and drone will enter sleep mode. To wake from sleep mode, press the
power buttons on the remote control and drone.
8. To manually power o the drone, slide the power switch on the drone to
the o position. To manually power o the remote control, press the
power button on the remote control again
Controls
1. Press the left stick forward to launch the drone up to a chosen altitude and
then release the left stick to make the drone hover at that altitude.
2. After takeo, the drone should hover in place if there is no input from the
remote control (minor drift is to be expected when flying outdoors). Press
the trim button to help as needed to calibrate the neutral flight of the
drone and reduce any drift.
3. Push the left stick forward to fly the drone up and pull the left stick
backward to fly the drone down.
4. Push the right stick to the right to spin the drone clockwise and push the
right stick to the left to spin the drone counterclockwise.
5. Push the right stick forward to fly the drone forward and pull the right
stick backward to fly the drone backward.
6. To land the drone, start with the drone at any altitude and then pull and
hold the left stick backward to fly the drone down slowly. When the drone
lands, the propellers will shut o automatically within 3 seconds.
Note: If connection is lost during normal flight, the drone will hover and
attempt to pair to the remote control for 5 seconds. If pairing is
unsuccessful, the drone will begin auto landing.
7. Once the drone has landed and the propellers have stopped spinning,
press the power button on the remote control and slide the power switch
on the drone to the o position to power o the remote control and drone.
Note: The drone features lock motor protection to protect the drone in the
event of abnormal working conditions. The status light on the drone will
begin to flash rapidly. Power o the remote control and drone, place the
drone upright on a flat surface, and then power on and pair the remote
control and drone again to resume flying.
Contents
1 Stealth Spinner Drone
1 Remote Control
1 DC Charging Cable
Getting Started
The remote control requires 2 AA 1.5V batteries
(not included) and the drone uses a built-in
rechargeable lithium-ion battery.
Drone
1. Make sure the power switch on the side of
the drone is in the o position.
2. Plug the DC end of the charging cable into
the charging port on the side of the drone.
3. Plug the A end of the charging cable into a
powered USB-A port or a USB-A power
adapter (not included). The indicator light on
the drone will glow while the drone is
charging and will shut o when the vehicle is
fully charged.
4. Wait for the drone to fully charge and then
unplug the charging cable.
Remote control
1. Use a tool to press and hold the battery cover
release on the back of the remote control
and then slide down the battery cover.
2. Insert 2 AA 1.5V batteries (not included) into
the battery compartment according to the
battery diagram.
3. Slide the battery cover back into place
securely.
Power Switch
Status Light
Charging Port
Left Stick
Status Light
Power Button
Right Stick
Trim Button
Battery Cover Release
STEALTH SPINNER
8+
Up
1-800-374-2744
Printed in China
WARNING:
CHOKING HAZARD –
Small Parts.
Not for children under 3 years of age.
KEEP THIS INSTRUCTION MANUAL AS IT CONTAINS IMPORTANT
INFORMATION FOR FUTURE REFERENCE.
Due to continuous product improvements, the pictures on this
manual may dier slightly from the actual product.
BC
Down
Forward
Reverse
Left Turn
Right Turn
• Adult supervision is recommended when operating the vehicle.
• Always drive responsibly and make sure driving paths are clear. Never
drive towards or in close proximity to people or animals. Never drive
on streets or roadways to avoid trac hazards.
• Keep fingers, hair, and loose clothing away from tires and all moving
parts while the vehicle is in motion.
• Avoid exposing the vehicle and remote control to water. Avoid driving
through water. Never drive outdoors in rain or snow. Never leave the
vehicle or remote control outdoors overnight.
• Do not expose the vehicle or remote control to extreme temperatures.
• Do not leave the vehicle or remote control near sources of heat or
under direct sunlight for extended periods.
• Do not sit, step, stand, or place objects on the vehicle. It is not designed
to support extra weight.
• Do not disassemble or modify the vehicle or remote control.
• Thoroughly inspect the vehicle and remote control before every use. If
the vehicle or remote control appears worn, frayed, splintered, cracked,
or broken in any manner, discontinue use and discard immediately.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
Sharper Image® name and logos (including the 77 logo) are
trademarks or registered trademarks. Distributed by and
© 2025 MerchSource, LLC. Irvine, CA 92618. All rights reserved.
Model No.: 1020244
RECHARGEABLE BATTERY WARNINGS
(NON-REPLACEABLE)
• There is a risk of fire and personal injury if battery is punctured,
damaged, or misused.
• Do not dismantle, crush, incinerate or short-circuit battery.
• Never expose battery to extreme temperatures or moisture.
• Keep away from flammable materials and direct sunlight.
• Only charge using the provided charger, cable, and/or adapters.
• Rechargeable battery is only to be charged by an adult.
• Adult supervision is required while charging the battery.
• Allow battery to cool to room temperature before charging.
• Charge on a non-flammable surface and keep away from flammable
products.
• Discontinue charging if battery becomes hot, swells, smokes, or gives
o a strong odor.
• Battery chargers used with the product are to be regularly examined
for damage to the cord, plug, enclosure, and other parts. In the event
of such damage, chargers must not be used until the damage has
been repaired.
• Recycle or dispose of battery according to federal, state, and local laws.
•Keep these instructions for future reference.
ALKALINE BATTERY WARNINGS
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable
batteries.
• Alkaline batteries are recommended. Use only the specified voltage.
• Insert batteries using the correct polarity. Always use, replace, and
recharge (if applicable) batteries under adult supervision.
• Do not attempt to charge non-rechargeable batteries.
• Do not short-circuit the battery supply terminals.
• Do not dispose of batteries in fire: batteries may explode or leak.
• Remove batteries before storing.
• Recycle or dispose of batteries according to federal, state, and local
laws.
• Keep these instructions for future reference.
