Regulatory Information
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
PoE-SW811G-DIN PoE Switch User Guide
The specifications and the information of the products mentioned in the manual are for reference only, and may not
represent the most recent revision; please check with your dealer for any changes.
1. Introduction
1.1 Package Contents
PoE Switch *1
User’s Manual *1
power adapter *1
If any of these are missing or damaged, please contact your dealer immediately. If possible, retain the packaging, including the
original packing material and contents, and repack the product in case there is a need to return it for repair or refund.
1.2 Description
Completely plug-and-play –with data and power over Ethernet through one cable, the PoE Switch reduces cabling requirements (and
by association, installation time and costs), and eliminates the need for dedicated electrical outlets for a power source. Providing 8
PoE ports, the PoE Switch is ideal for small businesses and workgroups the PoE for compatible wireless access points, IP-based
surveillance cameras, or IP phones, in any places easily, efficiently and cost-effectively.
1.3 Features
* Up to 30W of PoE power per port
* Up to 120W of total PoE power
* Complies to IEEE 802.3 af/at PoE+ standard
* Power Detection (PD): Only compatible PoE devices will receive power
* Safe and Reliable Power to compatible WLAN Access Points
* Automatic Detection and Protection of Non–Standard Ethernet Terminals
* Supports 10/100/1000 Base-T applications
* Compact Design Fits Easily in WLAN Access
* Plug-and-Play – no configuration required
1.4 Specification
Model PoE-SW811G-DIN
10/100Mbps Copper Ports
Port1-8: 8×10/100Base-TX RJ-45
Auto-MDI/MDI-X port(POE)
1000Mbps Copper Ports
port 9:1 X 10/100/1000Base-TX RJ-
45 Auto-MDI/MDI-X port
SFP/mini-GBIC Slots
port 10: 1XSFP port 1000Base-X,
Ethernet uplink port
LED
Power(Orange)
10/100/1000LNK / ACT(Green)
Dimension (W x D x H)
138 x 107 x 44 mm, 1U height
Weight 0.514kg
Power Supply 48-55VDC
Power Consumption
Idling: 1 W
Full load: 120 W
PoE Standard IEEE 802.3at, IEEE802.3af
PoE Power Output 30W,one port Max
PoE Power Supply Type 1/2(+), 3/6(-), Mode-A, End-Span
Operaing Temperature
–30 °C to +65 °C (-22 °F to
+149 °F)
Lightning Protection
Port Contact discharge: 4 kV
Regulation Compliance FCC Part 15 Class B, CE UKCA
Standards Compliance
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE802.3abGigabit 1000BASE-T
IEEE 802.3z Gigabit SX/LX
IEEE 802.3x flow control and back
pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet
Plus
