Projection Settings
Go to Settings → Projection Settings to configure the projection
settings, including Device Mode (Standard or Energy-Saving),
Installation Mode, Digital Scaling, Auto Focus, Auto Four-Corner
Correction, One-Touch Calibration, Screen Recognition,
Intelligent Obstacle Avoidance, Manual Keystone Correction,
Reset Keystone Correction, and Intelligent Calibration.
Note: On the Bluetooth remote control pairing interface,
press the "Voice" button to bring up the pairing guide.
Wi-Fi
Select a WiFi account and enter the password to connect to
the network.
Bluetooth Remote Control Pairing
Remote Control Functions
Smart Projector
Projector Overview
The illustrations in this manual are for reference only. Product
design and specifications are subject to change without notice.
Please refer to the actual product.
Power On/Off
Up/Down/
Mute
OK
Left/Right
Voice
Back
Menu
Switch to Mouse
Control
Focus
Home
Volume +/-
Note: When playing videos or viewing images, press the
“ ” key to bring up the Display Settings, where you
can adjust the picture mode, brightness, contrast ratio,
hue, saturation and sharpness of videos/images.
Air Mouse Drift Calibration:
If the air mouse exhibits drift, after the remote control is paired
with the Bluetooth device, press and hold the OK and Home
buttons on the remote control simultaneously for 2 seconds. The
indicator light will stay on during this process. Then place the
remote control flat on a level surface and keep it stationary for
5 seconds. The indicator light will turn off, indicating that the air
mouse calibration is complete.
Safety Precautions
Please read this manual carefully before using the projector and
keep it in a safe place for future reference.
1. The projector is neither dustproof nor waterproof.
2. To reduce the risk of fire or electric shock, do not expose
the projector to rain, moisture, or liquids.
3. Use only the original power adapter supplied with the
projector. Operate the projector only with the specified
power supply.
4. The projector emits a strong beam of light from the lens.
Never look directly into the lens while the projector is
operating, as this may cause eye damage. Pay particular
attention to preventing children from looking directly into
the light beam.
5. Do not block the air inlet or outlet vents. Poor ventilation
may cause the projector to overheat, shorten its service life,
or create a safety hazard.
6. Regularly remove dust from the air inlet and outlet vents
on both sides of the projector using a vacuum cleaner.
Prolonged use in a dusty environment may cause dust to
For the Best Image Quality
accumulate inside the cooling system, resulting in
overheating, malfunction, or other safety hazards.
7. Do not use the projector in oily, humid, dusty, or smoky
environments. Exposure to oil, chemicals, excessive
moisture, or dust may damage the projector and create
safety hazards.
8. Handle the projector with care during installation, use,
and transportation. Protect it from impacts, vibration, and
accidental drops.
9. Disconnect the projector from the power supply if it will
not be used for an extended period.
10. Do not disassemble, inspect, modify, or repair the
projector yourself. Servicing must be performed by qualified
service personnel.
Position the projector directly in front of the screen.
Angled Placement Centered Placement Angled Placement
Projector Placement
Recommended Projection Distance and Image Size
1.35–2.25 m / 60–100 in.
Projection Range
Distance: 0.9–3.1 m/Image Size: 40–150 in.
Settings
App Store
Apps can be downloaded and installed directly from the
Store with a single click. Once installed, they are ready to
use. Available apps are regularly maintained and updated to
provide users with a stable and convenient experience.
The Settings menu contains eight categories: Projection,
Network, Bluetooth, Apps, Language & Keyboard, Date &
Time, Other Settings, and System.
Network Settings
Go to Settings
→
Network Settings
→
Wireless Network. Turn
on Wi-Fi, select the network you want to connect to, and
enter the password.
Align the mounting screw with the threaded hole on the bottom
of the projector. Insert and securely tighten the screw to
complete the installation.
Safety Precautions：
1. Ensure that the wall, ceiling, and mounting bracket can
support at least five times the combined weight of the projector
and bracket.
2. Do not apply glue, oil, or lubricants to the mounting screw, as
these substances may damage the projector housing and cause
the projector to fall.
3. Make sure the mounting screw is securely tightened before
use.
4. Check the mounting screw regularly and retighten it if
necessary.
Mounting Bracket Installation
Thread Size: 1/4-inch imperial thread
Thread Length: 7 mm
M800Pro
※Quick Start Guide※
Input: 100-240VAC 50/60Hz 2.5A Max
Operating temperature: 25
℃
Altitude: 2000 m or less
Lens
Air Inlet
Power Button
Speaker
Air Outlet
Power Input
USB P
The power plug serves as
the disconnect device.
ort
Rotatable Body
The rating label is
located on the bottom
of the product.
HD
Projection Settings
Go to Settings → Projection Settings to configure the projection
settings, including Device Mode (Standard or Energy-Saving),
Installation Mode, Digital Scaling, Auto Focus, Auto Four-Corner
Correction, One-Touch Calibration, Screen Recognition,
Intelligent Obstacle Avoidance, Manual Keystone Correction,
Reset Keystone Correction, and Intelligent Calibration.
Note: On the Bluetooth remote control pairing interface,
press the "Voice" button to bring up the pairing guide.
Wi-Fi
Select a WiFi account and enter the password to connect to
the network.
Bluetooth Remote Control Pairing
Remote Control Functions
Smart Projector
Projector Overview
The illustrations in this manual are for reference only. Product
design and specifications are subject to change without notice.
Please refer to the actual product.
Power On/Off
Up/Down/
Mute
OK
Left/Right
Voice
Back
Menu
Switch to Mouse
Control
Focus
Home
Volume +/-
Note: When playing videos or viewing images, press the
“ ” key to bring up the Display Settings, where you
can adjust the picture mode, brightness, contrast ratio,
hue, saturation and sharpness of videos/images.
Air Mouse Drift Calibration:
If the air mouse exhibits drift, after the remote control is paired
with the Bluetooth device, press and hold the OK and Home
buttons on the remote control simultaneously for 2 seconds. The
indicator light will stay on during this process. Then place the
remote control flat on a level surface and keep it stationary for
5 seconds. The indicator light will turn off, indicating that the air
mouse calibration is complete.
Safety Precautions
Please read this manual carefully before using the projector and
keep it in a safe place for future reference.
1. The projector is neither dustproof nor waterproof.
2. To reduce the risk of fire or electric shock, do not expose
the projector to rain, moisture, or liquids.
3. Use only the original power adapter supplied with the
projector. Operate the projector only with the specified
power supply.
4. The projector emits a strong beam of light from the lens.
Never look directly into the lens while the projector is
operating, as this may cause eye damage. Pay particular
attention to preventing children from looking directly into
the light beam.
5. Do not block the air inlet or outlet vents. Poor ventilation
may cause the projector to overheat, shorten its service life,
or create a safety hazard.
6. Regularly remove dust from the air inlet and outlet vents
on both sides of the projector using a vacuum cleaner.
Prolonged use in a dusty environment may cause dust to
For the Best Image Quality
accumulate inside the cooling system, resulting in
overheating, malfunction, or other safety hazards.
7. Do not use the projector in oily, humid, dusty, or smoky
environments. Exposure to oil, chemicals, excessive
moisture, or dust may damage the projector and create
safety hazards.
8. Handle the projector with care during installation, use,
and transportation. Protect it from impacts, vibration, and
accidental drops.
9. Disconnect the projector from the power supply if it will
not be used for an extended period.
10. Do not disassemble, inspect, modify, or repair the
projector yourself. Servicing must be performed by qualified
service personnel.
Position the projector directly in front of the screen.
Angled Placement Centered Placement Angled Placement
Projector Placement
Recommended Projection Distance and Image Size
1.35–2.25 m / 60–100 in.
Projection Range
Distance: 0.9–3.1 m/Image Size: 40–150 in.
Settings
App Store
Apps can be downloaded and installed directly from the
Store with a single click. Once installed, they are ready to
use. Available apps are regularly maintained and updated to
provide users with a stable and convenient experience.
The Settings menu contains eight categories: Projection,
Network, Bluetooth, Apps, Language & Keyboard, Date &
Time, Other Settings, and System.
Network Settings
Go to Settings
→
Network Settings
→
Wireless Network. Turn
on Wi-Fi, select the network you want to connect to, and
enter the password.
Align the mounting screw with the threaded hole on the bottom
of the projector. Insert and securely tighten the screw to
complete the installation.
Safety Precautions：
1. Ensure that the wall, ceiling, and mounting bracket can
support at least five times the combined weight of the projector
and bracket.
2. Do not apply glue, oil, or lubricants to the mounting screw, as
these substances may damage the projector housing and cause
the projector to fall.
3. Make sure the mounting screw is securely tightened before
use.
4. Check the mounting screw regularly and retighten it if
necessary.
Mounting Bracket Installation
Thread Size: 1/4-inch imperial thread
Thread Length: 7 mm
M800Pro
※Quick Start Guide※
Input: 100-240VAC 50/60Hz 2.5A Max
Operating temperature: 25
℃
Altitude: 2000 m or less
Lens
Air Inlet
Power Button
Speaker
Air Outlet
Power Input
USB P
The power plug serves as
the disconnect device.
ort
Rotatable Body
The rating label is
located on the bottom
of the product.
HD
Projection Settings
Go to Settings → Projection Settings to configure the projection
settings, including Device Mode (Standard or Energy-Saving),
Installation Mode, Digital Scaling, Auto Focus, Auto Four-Corner
Correction, One-Touch Calibration, Screen Recognition,
Intelligent Obstacle Avoidance, Manual Keystone Correction,
Reset Keystone Correction, and Intelligent Calibration.
Note: On the Bluetooth remote control pairing interface,
press the "Voice" button to bring up the pairing guide.
Wi-Fi
Select a WiFi account and enter the password to connect to
the network.
Bluetooth Remote Control Pairing
Remote Control Functions
Smart Projector
Projector Overview
The illustrations in this manual are for reference only. Product
design and specifications are subject to change without notice.
Please refer to the actual product.
Power On/Off
Up/Down/
Mute
OK
Left/Right
Voice
Back
Menu
Switch to Mouse
Control
Focus
Home
Volume +/-
Note: When playing videos or viewing images, press the
“ ” key to bring up the Display Settings, where you
can adjust the picture mode, brightness, contrast ratio,
hue, saturation and sharpness of videos/images.
Air Mouse Drift Calibration:
If the air mouse exhibits drift, after the remote control is paired
with the Bluetooth device, press and hold the OK and Home
buttons on the remote control simultaneously for 2 seconds. The
indicator light will stay on during this process. Then place the
remote control flat on a level surface and keep it stationary for
5 seconds. The indicator light will turn off, indicating that the air
mouse calibration is complete.
Safety Precautions
Please read this manual carefully before using the projector and
keep it in a safe place for future reference.
1. The projector is neither dustproof nor waterproof.
2. To reduce the risk of fire or electric shock, do not expose
the projector to rain, moisture, or liquids.
3. Use only the original power adapter supplied with the
projector. Operate the projector only with the specified
power supply.
4. The projector emits a strong beam of light from the lens.
Never look directly into the lens while the projector is
operating, as this may cause eye damage. Pay particular
attention to preventing children from looking directly into
the light beam.
5. Do not block the air inlet or outlet vents. Poor ventilation
may cause the projector to overheat, shorten its service life,
or create a safety hazard.
6. Regularly remove dust from the air inlet and outlet vents
on both sides of the projector using a vacuum cleaner.
Prolonged use in a dusty environment may cause dust to
For the Best Image Quality
accumulate inside the cooling system, resulting in
overheating, malfunction, or other safety hazards.
7. Do not use the projector in oily, humid, dusty, or smoky
environments. Exposure to oil, chemicals, excessive
moisture, or dust may damage the projector and create
safety hazards.
8. Handle the projector with care during installation, use,
and transportation. Protect it from impacts, vibration, and
accidental drops.
9. Disconnect the projector from the power supply if it will
not be used for an extended period.
10. Do not disassemble, inspect, modify, or repair the
projector yourself. Servicing must be performed by qualified
service personnel.
Position the projector directly in front of the screen.
Angled Placement Centered Placement Angled Placement
Projector Placement
Recommended Projection Distance and Image Size
1.35–2.25 m / 60–100 in.
Projection Range
Distance: 0.9–3.1 m/Image Size: 40–150 in.
Settings
App Store
Apps can be downloaded and installed directly from the
Store with a single click. Once installed, they are ready to
use. Available apps are regularly maintained and updated to
provide users with a stable and convenient experience.
The Settings menu contains eight categories: Projection,
Network, Bluetooth, Apps, Language & Keyboard, Date &
Time, Other Settings, and System.
Network Settings
Go to Settings
→
Network Settings
→
Wireless Network. Turn
on Wi-Fi, select the network you want to connect to, and
enter the password.
Align the mounting screw with the threaded hole on the bottom
of the projector. Insert and securely tighten the screw to
complete the installation.
Safety Precautions：
1. Ensure that the wall, ceiling, and mounting bracket can
support at least five times the combined weight of the projector
and bracket.
2. Do not apply glue, oil, or lubricants to the mounting screw, as
these substances may damage the projector housing and cause
the projector to fall.
3. Make sure the mounting screw is securely tightened before
use.
4. Check the mounting screw regularly and retighten it if
necessary.
Mounting Bracket Installation
Thread Size: 1/4-inch imperial thread
Thread Length: 7 mm
M800Pro
※Quick Start Guide※
Input: 100-240VAC 50/60Hz 2.5A Max
Operating temperature: 25
℃
Altitude: 2000 m or less
Lens
Air Inlet
Power Button
Speaker
Air Outlet
Power Input
USB P
The power plug serves as
the disconnect device.
ort
Rotatable Body
The rating label is
located on the bottom
of the product.
HD
Projection Settings
Go to Settings → Projection Settings to configure the projection
settings, including Device Mode (Standard or Energy-Saving),
Installation Mode, Digital Scaling, Auto Focus, Auto Four-Corner
Correction, One-Touch Calibration, Screen Recognition,
Intelligent Obstacle Avoidance, Manual Keystone Correction,
Reset Keystone Correction, and Intelligent Calibration.
Note: On the Bluetooth remote control pairing interface,
press the "Voice" button to bring up the pairing guide.
Wi-Fi
Select a WiFi account and enter the password to connect to
the network.
Bluetooth Remote Control Pairing
Remote Control Functions
Smart Projector
Projector Overview
The illustrations in this manual are for reference only. Product
design and specifications are subject to change without notice.
Please refer to the actual product.
Power On/Off
Up/Down/
Mute
OK
Left/Right
Voice
Back
Menu
Switch to Mouse
Control
Focus
Home
Volume +/-
Note: When playing videos or viewing images, press the
“ ” key to bring up the Display Settings, where you
can adjust the picture mode, brightness, contrast ratio,
hue, saturation and sharpness of videos/images.
Air Mouse Drift Calibration:
If the air mouse exhibits drift, after the remote control is paired
with the Bluetooth device, press and hold the OK and Home
buttons on the remote control simultaneously for 2 seconds. The
indicator light will stay on during this process. Then place the
remote control flat on a level surface and keep it stationary for
5 seconds. The indicator light will turn off, indicating that the air
mouse calibration is complete.
Safety Precautions
Please read this manual carefully before using the projector and
keep it in a safe place for future reference.
1. The projector is neither dustproof nor waterproof.
2. To reduce the risk of fire or electric shock, do not expose
the projector to rain, moisture, or liquids.
3. Use only the original power adapter supplied with the
projector. Operate the projector only with the specified
power supply.
4. The projector emits a strong beam of light from the lens.
Never look directly into the lens while the projector is
operating, as this may cause eye damage. Pay particular
attention to preventing children from looking directly into
the light beam.
5. Do not block the air inlet or outlet vents. Poor ventilation
may cause the projector to overheat, shorten its service life,
or create a safety hazard.
6. Regularly remove dust from the air inlet and outlet vents
on both sides of the projector using a vacuum cleaner.
Prolonged use in a dusty environment may cause dust to
For the Best Image Quality
accumulate inside the cooling system, resulting in
overheating, malfunction, or other safety hazards.
7. Do not use the projector in oily, humid, dusty, or smoky
environments. Exposure to oil, chemicals, excessive
moisture, or dust may damage the projector and create
safety hazards.
8. Handle the projector with care during installation, use,
and transportation. Protect it from impacts, vibration, and
accidental drops.
9. Disconnect the projector from the power supply if it will
not be used for an extended period.
10. Do not disassemble, inspect, modify, or repair the
projector yourself. Servicing must be performed by qualified
service personnel.
Position the projector directly in front of the screen.
Angled Placement Centered Placement Angled Placement
Projector Placement
Recommended Projection Distance and Image Size
1.35–2.25 m / 60–100 in.
Projection Range
Distance: 0.9–3.1 m/Image Size: 40–150 in.
Settings
App Store
Apps can be downloaded and installed directly from the
Store with a single click. Once installed, they are ready to
use. Available apps are regularly maintained and updated to
provide users with a stable and convenient experience.
The Settings menu contains eight categories: Projection,
Network, Bluetooth, Apps, Language & Keyboard, Date &
Time, Other Settings, and System.
Network Settings
Go to Settings
→
Network Settings
→
Wireless Network. Turn
on Wi-Fi, select the network you want to connect to, and
enter the password.
Align the mounting screw with the threaded hole on the bottom
of the projector. Insert and securely tighten the screw to
complete the installation.
Safety Precautions：
1. Ensure that the wall, ceiling, and mounting bracket can
support at least five times the combined weight of the projector
and bracket.
2. Do not apply glue, oil, or lubricants to the mounting screw, as
these substances may damage the projector housing and cause
the projector to fall.
3. Make sure the mounting screw is securely tightened before
use.
4. Check the mounting screw regularly and retighten it if
necessary.
Mounting Bracket Installation
Thread Size: 1/4-inch imperial thread
Thread Length: 7 mm
M800Pro
※Quick Start Guide※
Input: 100-240VAC 50/60Hz 2.5A Max
Operating temperature: 25
℃
Altitude: 2000 m or less
Lens
Air Inlet
Power Button
Speaker
Air Outlet
Power Input
USB P
The power plug serves as
the disconnect device.
ort
Rotatable Body
The rating label is
located on the bottom
of the product.
HD
Projection Settings
Go to Settings → Projection Settings to configure the projection
settings, including Device Mode (Standard or Energy-Saving),
Installation Mode, Digital Scaling, Auto Focus, Auto Four-Corner
Correction, One-Touch Calibration, Screen Recognition,
Intelligent Obstacle Avoidance, Manual Keystone Correction,
Reset Keystone Correction, and Intelligent Calibration.
Note: On the Bluetooth remote control pairing interface,
press the "Voice" button to bring up the pairing guide.
Wi-Fi
Select a WiFi account and enter the password to connect to
the network.
Bluetooth Remote Control Pairing
Remote Control Functions
Smart Projector
Projector Overview
The illustrations in this manual are for reference only. Product
design and specifications are subject to change without notice.
Please refer to the actual product.
Power On/Off
Up/Down/
Mute
OK
Left/Right
Voice
Back
Menu
Switch to Mouse
Control
Focus
Home
Volume +/-
Note: When playing videos or viewing images, press the
“ ” key to bring up the Display Settings, where you
can adjust the picture mode, brightness, contrast ratio,
hue, saturation and sharpness of videos/images.
Air Mouse Drift Calibration:
If the air mouse exhibits drift, after the remote control is paired
with the Bluetooth device, press and hold the OK and Home
buttons on the remote control simultaneously for 2 seconds. The
indicator light will stay on during this process. Then place the
remote control flat on a level surface and keep it stationary for
5 seconds. The indicator light will turn off, indicating that the air
mouse calibration is complete.
Safety Precautions
Please read this manual carefully before using the projector and
keep it in a safe place for future reference.
1. The projector is neither dustproof nor waterproof.
2. To reduce the risk of fire or electric shock, do not expose
the projector to rain, moisture, or liquids.
3. Use only the original power adapter supplied with the
projector. Operate the projector only with the specified
power supply.
4. The projector emits a strong beam of light from the lens.
Never look directly into the lens while the projector is
operating, as this may cause eye damage. Pay particular
attention to preventing children from looking directly into
the light beam.
5. Do not block the air inlet or outlet vents. Poor ventilation
may cause the projector to overheat, shorten its service life,
or create a safety hazard.
6. Regularly remove dust from the air inlet and outlet vents
on both sides of the projector using a vacuum cleaner.
Prolonged use in a dusty environment may cause dust to
For the Best Image Quality
accumulate inside the cooling system, resulting in
overheating, malfunction, or other safety hazards.
7. Do not use the projector in oily, humid, dusty, or smoky
environments. Exposure to oil, chemicals, excessive
moisture, or dust may damage the projector and create
safety hazards.
8. Handle the projector with care during installation, use,
and transportation. Protect it from impacts, vibration, and
accidental drops.
9. Disconnect the projector from the power supply if it will
not be used for an extended period.
10. Do not disassemble, inspect, modify, or repair the
projector yourself. Servicing must be performed by qualified
service personnel.
Position the projector directly in front of the screen.
Angled Placement Centered Placement Angled Placement
Projector Placement
Recommended Projection Distance and Image Size
1.35–2.25 m / 60–100 in.
Projection Range
Distance: 0.9–3.1 m/Image Size: 40–150 in.
Settings
App Store
Apps can be downloaded and installed directly from the
Store with a single click. Once installed, they are ready to
use. Available apps are regularly maintained and updated to
provide users with a stable and convenient experience.
The Settings menu contains eight categories: Projection,
Network, Bluetooth, Apps, Language & Keyboard, Date &
Time, Other Settings, and System.
Network Settings
Go to Settings
→
Network Settings
→
Wireless Network. Turn
on Wi-Fi, select the network you want to connect to, and
enter the password.
Align the mounting screw with the threaded hole on the bottom
of the projector. Insert and securely tighten the screw to
complete the installation.
Safety Precautions：
1. Ensure that the wall, ceiling, and mounting bracket can
support at least five times the combined weight of the projector
and bracket.
2. Do not apply glue, oil, or lubricants to the mounting screw, as
these substances may damage the projector housing and cause
the projector to fall.
3. Make sure the mounting screw is securely tightened before
use.
4. Check the mounting screw regularly and retighten it if
necessary.
Mounting Bracket Installation
Thread Size: 1/4-inch imperial thread
Thread Length: 7 mm
M800Pro
※Quick Start Guide※
Input: 100-240VAC 50/60Hz 2.5A Max
Operating temperature: 25
℃
Altitude: 2000 m or less
Lens
Air Inlet
Power Button
Speaker
Air Outlet
Power Input
USB P
The power plug serves as
the disconnect device.
ort
Rotatable Body
The rating label is
located on the bottom
of the product.
HD
Projection Settings
Go to Settings → Projection Settings to configure the projection
settings, including Device Mode (Standard or Energy-Saving),
Installation Mode, Digital Scaling, Auto Focus, Auto Four-Corner
Correction, One-Touch Calibration, Screen Recognition,
Intelligent Obstacle Avoidance, Manual Keystone Correction,
Reset Keystone Correction, and Intelligent Calibration.
Note: On the Bluetooth remote control pairing interface,
press the "Voice" button to bring up the pairing guide.
Wi-Fi
Select a WiFi account and enter the password to connect to
the network.
Bluetooth Remote Control Pairing
Remote Control Functions
Smart Projector
Projector Overview
The illustrations in this manual are for reference only. Product
design and specifications are subject to change without notice.
Please refer to the actual product.
Power On/Off
Up/Down/
Mute
OK
Left/Right
Voice
Back
Menu
Switch to Mouse
Control
Focus
Home
Volume +/-
Note: When playing videos or viewing images, press the
“ ” key to bring up the Display Settings, where you
can adjust the picture mode, brightness, contrast ratio,
hue, saturation and sharpness of videos/images.
Air Mouse Drift Calibration:
If the air mouse exhibits drift, after the remote control is paired
with the Bluetooth device, press and hold the OK and Home
buttons on the remote control simultaneously for 2 seconds. The
indicator light will stay on during this process. Then place the
remote control flat on a level surface and keep it stationary for
5 seconds. The indicator light will turn off, indicating that the air
mouse calibration is complete.
Safety Precautions
Please read this manual carefully before using the projector and
keep it in a safe place for future reference.
1. The projector is neither dustproof nor waterproof.
2. To reduce the risk of fire or electric shock, do not expose
the projector to rain, moisture, or liquids.
3. Use only the original power adapter supplied with the
projector. Operate the projector only with the specified
power supply.
4. The projector emits a strong beam of light from the lens.
Never look directly into the lens while the projector is
operating, as this may cause eye damage. Pay particular
attention to preventing children from looking directly into
the light beam.
5. Do not block the air inlet or outlet vents. Poor ventilation
may cause the projector to overheat, shorten its service life,
or create a safety hazard.
6. Regularly remove dust from the air inlet and outlet vents
on both sides of the projector using a vacuum cleaner.
Prolonged use in a dusty environment may cause dust to
For the Best Image Quality
accumulate inside the cooling system, resulting in
overheating, malfunction, or other safety hazards.
7. Do not use the projector in oily, humid, dusty, or smoky
environments. Exposure to oil, chemicals, excessive
moisture, or dust may damage the projector and create
safety hazards.
8. Handle the projector with care during installation, use,
and transportation. Protect it from impacts, vibration, and
accidental drops.
9. Disconnect the projector from the power supply if it will
not be used for an extended period.
10. Do not disassemble, inspect, modify, or repair the
projector yourself. Servicing must be performed by qualified
service personnel.
Position the projector directly in front of the screen.
Angled Placement Centered Placement Angled Placement
Projector Placement
Recommended Projection Distance and Image Size
1.35–2.25 m / 60–100 in.
Projection Range
Distance: 0.9–3.1 m/Image Size: 40–150 in.
Settings
App Store
Apps can be downloaded and installed directly from the
Store with a single click. Once installed, they are ready to
use. Available apps are regularly maintained and updated to
provide users with a stable and convenient experience.
The Settings menu contains eight categories: Projection,
Network, Bluetooth, Apps, Language & Keyboard, Date &
Time, Other Settings, and System.
Network Settings
Go to Settings
→
Network Settings
→
Wireless Network. Turn
on Wi-Fi, select the network you want to connect to, and
enter the password.
Align the mounting screw with the threaded hole on the bottom
of the projector. Insert and securely tighten the screw to
complete the installation.
Safety Precautions：
1. Ensure that the wall, ceiling, and mounting bracket can
support at least five times the combined weight of the projector
and bracket.
2. Do not apply glue, oil, or lubricants to the mounting screw, as
these substances may damage the projector housing and cause
the projector to fall.
3. Make sure the mounting screw is securely tightened before
use.
4. Check the mounting screw regularly and retighten it if
necessary.
Mounting Bracket Installation
Thread Size: 1/4-inch imperial thread
Thread Length: 7 mm
M800Pro
※Quick Start Guide※
Input: 100-240VAC 50/60Hz 2.5A Max
Operating temperature: 25
℃
Altitude: 2000 m or less
Lens
Air Inlet
Power Button
Speaker
Air Outlet
Power Input
USB P
The power plug serves as
the disconnect device.
ort
Rotatable Body
The rating label is
located on the bottom
of the product.
HD
Projection Settings
Go to Settings → Projection Settings to configure the projection
settings, including Device Mode (Standard or Energy-Saving),
Installation Mode, Digital Scaling, Auto Focus, Auto Four-Corner
Correction, One-Touch Calibration, Screen Recognition,
Intelligent Obstacle Avoidance, Manual Keystone Correction,
Reset Keystone Correction, and Intelligent Calibration.
Note: On the Bluetooth remote control pairing interface,
press the "Voice" button to bring up the pairing guide.
Wi-Fi
Select a WiFi account and enter the password to connect to
the network.
Bluetooth Remote Control Pairing
Remote Control Functions
Smart Projector
Projector Overview
The illustrations in this manual are for reference only. Product
design and specifications are subject to change without notice.
Please refer to the actual product.
Power On/Off
Up/Down/
Mute
OK
Left/Right
Voice
Back
Menu
Switch to Mouse
Control
Focus
Home
Volume +/-
Note: When playing videos or viewing images, press the
“ ” key to bring up the Display Settings, where you
can adjust the picture mode, brightness, contrast ratio,
hue, saturation and sharpness of videos/images.
Air Mouse Drift Calibration:
If the air mouse exhibits drift, after the remote control is paired
with the Bluetooth device, press and hold the OK and Home
buttons on the remote control simultaneously for 2 seconds. The
indicator light will stay on during this process. Then place the
remote control flat on a level surface and keep it stationary for
5 seconds. The indicator light will turn off, indicating that the air
mouse calibration is complete.
Safety Precautions
Please read this manual carefully before using the projector and
keep it in a safe place for future reference.
1. The projector is neither dustproof nor waterproof.
2. To reduce the risk of fire or electric shock, do not expose
the projector to rain, moisture, or liquids.
3. Use only the original power adapter supplied with the
projector. Operate the projector only with the specified
power supply.
4. The projector emits a strong beam of light from the lens.
Never look directly into the lens while the projector is
operating, as this may cause eye damage. Pay particular
attention to preventing children from looking directly into
the light beam.
5. Do not block the air inlet or outlet vents. Poor ventilation
may cause the projector to overheat, shorten its service life,
or create a safety hazard.
6. Regularly remove dust from the air inlet and outlet vents
on both sides of the projector using a vacuum cleaner.
Prolonged use in a dusty environment may cause dust to
For the Best Image Quality
accumulate inside the cooling system, resulting in
overheating, malfunction, or other safety hazards.
7. Do not use the projector in oily, humid, dusty, or smoky
environments. Exposure to oil, chemicals, excessive
moisture, or dust may damage the projector and create
safety hazards.
8. Handle the projector with care during installation, use,
and transportation. Protect it from impacts, vibration, and
accidental drops.
9. Disconnect the projector from the power supply if it will
not be used for an extended period.
10. Do not disassemble, inspect, modify, or repair the
projector yourself. Servicing must be performed by qualified
service personnel.
Position the projector directly in front of the screen.
Angled Placement Centered Placement Angled Placement
Projector Placement
Recommended Projection Distance and Image Size
1.35–2.25 m / 60–100 in.
Projection Range
Distance: 0.9–3.1 m/Image Size: 40–150 in.
Settings
App Store
Apps can be downloaded and installed directly from the
Store with a single click. Once installed, they are ready to
use. Available apps are regularly maintained and updated to
provide users with a stable and convenient experience.
The Settings menu contains eight categories: Projection,
Network, Bluetooth, Apps, Language & Keyboard, Date &
Time, Other Settings, and System.
Network Settings
Go to Settings
→
Network Settings
→
Wireless Network. Turn
on Wi-Fi, select the network you want to connect to, and
enter the password.
Align the mounting screw with the threaded hole on the bottom
of the projector. Insert and securely tighten the screw to
complete the installation.
Safety Precautions：
1. Ensure that the wall, ceiling, and mounting bracket can
support at least five times the combined weight of the projector
and bracket.
2. Do not apply glue, oil, or lubricants to the mounting screw, as
these substances may damage the projector housing and cause
the projector to fall.
3. Make sure the mounting screw is securely tightened before
use.
4. Check the mounting screw regularly and retighten it if
necessary.
Mounting Bracket Installation
Thread Size: 1/4-inch imperial thread
Thread Length: 7 mm
M800Pro
※Quick Start Guide※
Input: 100-240VAC 50/60Hz 2.5A Max
Operating temperature: 25
℃
Altitude: 2000 m or less
Lens
Air Inlet
Power Button
Speaker
Air Outlet
Power Input
USB P
The power plug serves as
the disconnect device.
ort
Rotatable Body
The rating label is
located on the bottom
of the product.
HD
Projection Settings
Go to Settings → Projection Settings to configure the projection
settings, including Device Mode (Standard or Energy-Saving),
Installation Mode, Digital Scaling, Auto Focus, Auto Four-Corner
Correction, One-Touch Calibration, Screen Recognition,
Intelligent Obstacle Avoidance, Manual Keystone Correction,
Reset Keystone Correction, and Intelligent Calibration.
Note: On the Bluetooth remote control pairing interface,
press the "Voice" button to bring up the pairing guide.
Wi-Fi
Select a WiFi account and enter the password to connect to
the network.
Bluetooth Remote Control Pairing
Remote Control Functions
Smart Projector
Projector Overview
The illustrations in this manual are for reference only. Product
design and specifications are subject to change without notice.
Please refer to the actual product.
Power On/Off
Up/Down/
Mute
OK
Left/Right
Voice
Back
Menu
Switch to Mouse
Control
Focus
Home
Volume +/-
Note: When playing videos or viewing images, press the
“ ” key to bring up the Display Settings, where you
can adjust the picture mode, brightness, contrast ratio,
hue, saturation and sharpness of videos/images.
Air Mouse Drift Calibration:
If the air mouse exhibits drift, after the remote control is paired
with the Bluetooth device, press and hold the OK and Home
buttons on the remote control simultaneously for 2 seconds. The
indicator light will stay on during this process. Then place the
remote control flat on a level surface and keep it stationary for
5 seconds. The indicator light will turn off, indicating that the air
mouse calibration is complete.
Safety Precautions
Please read this manual carefully before using the projector and
keep it in a safe place for future reference.
1. The projector is neither dustproof nor waterproof.
2. To reduce the risk of fire or electric shock, do not expose
the projector to rain, moisture, or liquids.
3. Use only the original power adapter supplied with the
projector. Operate the projector only with the specified
power supply.
4. The projector emits a strong beam of light from the lens.
Never look directly into the lens while the projector is
operating, as this may cause eye damage. Pay particular
attention to preventing children from looking directly into
the light beam.
5. Do not block the air inlet or outlet vents. Poor ventilation
may cause the projector to overheat, shorten its service life,
or create a safety hazard.
6. Regularly remove dust from the air inlet and outlet vents
on both sides of the projector using a vacuum cleaner.
Prolonged use in a dusty environment may cause dust to
For the Best Image Quality
accumulate inside the cooling system, resulting in
overheating, malfunction, or other safety hazards.
7. Do not use the projector in oily, humid, dusty, or smoky
environments. Exposure to oil, chemicals, excessive
moisture, or dust may damage the projector and create
safety hazards.
8. Handle the projector with care during installation, use,
and transportation. Protect it from impacts, vibration, and
accidental drops.
9. Disconnect the projector from the power supply if it will
not be used for an extended period.
10. Do not disassemble, inspect, modify, or repair the
projector yourself. Servicing must be performed by qualified
service personnel.
Position the projector directly in front of the screen.
Angled Placement Centered Placement Angled Placement
Projector Placement
Recommended Projection Distance and Image Size
1.35–2.25 m / 60–100 in.
Projection Range
Distance: 0.9–3.1 m/Image Size: 40–150 in.
Settings
App Store
Apps can be downloaded and installed directly from the
Store with a single click. Once installed, they are ready to
use. Available apps are regularly maintained and updated to
provide users with a stable and convenient experience.
The Settings menu contains eight categories: Projection,
Network, Bluetooth, Apps, Language & Keyboard, Date &
Time, Other Settings, and System.
Network Settings
Go to Settings
→
Network Settings
→
Wireless Network. Turn
on Wi-Fi, select the network you want to connect to, and
enter the password.
Align the mounting screw with the threaded hole on the bottom
of the projector. Insert and securely tighten the screw to
complete the installation.
Safety Precautions：
1. Ensure that the wall, ceiling, and mounting bracket can
support at least five times the combined weight of the projector
and bracket.
2. Do not apply glue, oil, or lubricants to the mounting screw, as
these substances may damage the projector housing and cause
the projector to fall.
3. Make sure the mounting screw is securely tightened before
use.
4. Check the mounting screw regularly and retighten it if
necessary.
Mounting Bracket Installation
Thread Size: 1/4-inch imperial thread
Thread Length: 7 mm
M800Pro
※Quick Start Guide※
Input: 100-240VAC 50/60Hz 2.5A Max
Operating temperature: 25
℃
Altitude: 2000 m or less
Lens
Air Inlet
Power Button
Speaker
Air Outlet
Power Input
USB P
The power plug serves as
the disconnect device.
ort
Rotatable Body
The rating label is
located on the bottom
of the product.
HD
Projection Settings
Go to Settings → Projection Settings to configure the projection
settings, including Device Mode (Standard or Energy-Saving),
Installation Mode, Digital Scaling, Auto Focus, Auto Four-Corner
Correction, One-Touch Calibration, Screen Recognition,
Intelligent Obstacle Avoidance, Manual Keystone Correction,
Reset Keystone Correction, and Intelligent Calibration.
Note: On the Bluetooth remote control pairing interface,
press the "Voice" button to bring up the pairing guide.
Wi-Fi
Select a WiFi account and enter the password to connect to
the network.
Bluetooth Remote Control Pairing
Remote Control Functions
Smart Projector
Projector Overview
The illustrations in this manual are for reference only. Product
design and specifications are subject to change without notice.
Please refer to the actual product.
Power On/Off
Up/Down/
Mute
OK
Left/Right
Voice
Back
Menu
Switch to Mouse
Control
Focus
Home
Volume +/-
Note: When playing videos or viewing images, press the
“ ” key to bring up the Display Settings, where you
can adjust the picture mode, brightness, contrast ratio,
hue, saturation and sharpness of videos/images.
Air Mouse Drift Calibration:
If the air mouse exhibits drift, after the remote control is paired
with the Bluetooth device, press and hold the OK and Home
buttons on the remote control simultaneously for 2 seconds. The
indicator light will stay on during this process. Then place the
remote control flat on a level surface and keep it stationary for
5 seconds. The indicator light will turn off, indicating that the air
mouse calibration is complete.
Safety Precautions
Please read this manual carefully before using the projector and
keep it in a safe place for future reference.
1. The projector is neither dustproof nor waterproof.
2. To reduce the risk of fire or electric shock, do not expose
the projector to rain, moisture, or liquids.
3. Use only the original power adapter supplied with the
projector. Operate the projector only with the specified
power supply.
4. The projector emits a strong beam of light from the lens.
Never look directly into the lens while the projector is
operating, as this may cause eye damage. Pay particular
attention to preventing children from looking directly into
the light beam.
5. Do not block the air inlet or outlet vents. Poor ventilation
may cause the projector to overheat, shorten its service life,
or create a safety hazard.
6. Regularly remove dust from the air inlet and outlet vents
on both sides of the projector using a vacuum cleaner.
Prolonged use in a dusty environment may cause dust to
For the Best Image Quality
accumulate inside the cooling system, resulting in
overheating, malfunction, or other safety hazards.
7. Do not use the projector in oily, humid, dusty, or smoky
environments. Exposure to oil, chemicals, excessive
moisture, or dust may damage the projector and create
safety hazards.
8. Handle the projector with care during installation, use,
and transportation. Protect it from impacts, vibration, and
accidental drops.
9. Disconnect the projector from the power supply if it will
not be used for an extended period.
10. Do not disassemble, inspect, modify, or repair the
projector yourself. Servicing must be performed by qualified
service personnel.
Position the projector directly in front of the screen.
Angled Placement Centered Placement Angled Placement
Projector Placement
Recommended Projection Distance and Image Size
1.35–2.25 m / 60–100 in.
Projection Range
Distance: 0.9–3.1 m/Image Size: 40–150 in.
Settings
App Store
Apps can be downloaded and installed directly from the
Store with a single click. Once installed, they are ready to
use. Available apps are regularly maintained and updated to
provide users with a stable and convenient experience.
The Settings menu contains eight categories: Projection,
Network, Bluetooth, Apps, Language & Keyboard, Date &
Time, Other Settings, and System.
Network Settings
Go to Settings
→
Network Settings
→
Wireless Network. Turn
on Wi-Fi, select the network you want to connect to, and
enter the password.
Align the mounting screw with the threaded hole on the bottom
of the projector. Insert and securely tighten the screw to
complete the installation.
Safety Precautions：
1. Ensure that the wall, ceiling, and mounting bracket can
support at least five times the combined weight of the projector
and bracket.
2. Do not apply glue, oil, or lubricants to the mounting screw, as
these substances may damage the projector housing and cause
the projector to fall.
3. Make sure the mounting screw is securely tightened before
use.
4. Check the mounting screw regularly and retighten it if
necessary.
Mounting Bracket Installation
Thread Size: 1/4-inch imperial thread
Thread Length: 7 mm
M800Pro
※Quick Start Guide※
Input: 100-240VAC 50/60Hz 2.5A Max
Operating temperature: 25
℃
Altitude: 2000 m or less
Lens
Air Inlet
Power Button
Speaker
Air Outlet
Power Input
USB P
The power plug serves as
the disconnect device.
ort
Rotatable Body
The rating label is
located on the bottom
of the product.
HD
System information
Device Safety
• Please pay attention to important information related to the
operation and maintenance of this device. Read this information
carefully to avoid problems. Following these safety precautions
will extend the service life of the device.
• Except as mentioned in this manual, consult qualified
personnel for installation and repair services. Do not use
damaged power cords, accessories or other peripheral devices.
• Keep the device away from flammable, explosive, strong
electromagnetic interference (large radar stations, power
stations, substations) and strong ambient light (avoid direct
sunlight) areas.
• Do not wrap or cover the device with any material that may
block the ventilation openings.
• Use only the standard power cord supplied with this device for
power supply.
• Ensure adequate ventilation space and that the ventilation
holes are not blocked to prevent excessive heat accumulation
inside the projector.
• Do not look directly into the lens while the projector is on.
This may cause serious eye injury.
• Do not bend or pull the power cord excessively.
Disclaimer
All images and function descriptions in this product manual are
based on the actual product and factory preset content. We are
committed to continuously improving product performance and
enhancing product functions. We reserve the right to modify the
product functions and interfaces described in this manual
Need Help?
If you encounter any issues, please contact our
customer support team at [email protected].
You can also scan the QR code below to access
product operation guides, how-to videos, FAQs,
and other helpful support resources.
FCC Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
• This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including
interference that may cause undesired operation.
Warning:Changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body.
IC Statement
This device complies with Innovation, Science and Economic
Development Canada's licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and.
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
- French:"Le présent appareil est conforme aux CNR d’innova-
tion, sciences et développement économique Canada
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et.
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement."
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set
forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20cm
between the radiator & your body.
Déclaration d'exposition aux radiations IC:
Cet équipement est conforme aux limites d'exposition aux
radiations IC établies pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec une distance
minimale de 20cm entre le radiateur et votre corps.
Operation of this device in the band 5150-5250 MHz is
restricted to indoor use only.
Le fonctionnement de cet appareil dans la bande 5150-5250
MHz est limité à une utilisation en intérieur uniquement.
without prior notice. Please refer to the final actual product.
Please keep your device properly. We are not liable for any losses
caused by software or hardware misoperation, unauthorized
repair or any other reasons beyond our control. We shall not be
liable for any third-party claims arising from the use of this
product.
The function descriptions of this product have been carefully
reviewed and proofread by our staff. We apologize for any
omissions and welcome your corrections.
• Do not place the power cord under the projector or any heavy
objects.
• Do not cover the power cord with any soft materials.
• Do not heat the power cord.
• Do not touch the power plug with wet hands.
• The power plug serves as the disconnect device.
Language Settings
Bluetooth Settings
Settings → Bluetooth Settings: Turn on the Bluetooth switch,
press Search for Bluetooth devices and select the target
device to pair.
Go to Settings
→
Language & Keyboard
→
Language
Settings. Select your preferred language, then press OK to
confirm.
Date & Time Settings
Other Settings
Go to Settings
→
Date & Time Settings to configure
Automatic Date & Time, Date, Time, Time Zone, and
24-Hour Format.
Go to Settings
→
Other Settings to configure Button Sound,
Screen Saver, Scheduled Power Off, and Factory Reset.
Screen Saver
Go to Settings
→
Other Settings
→
Screen Saver to set the
screen saver activation time.
If no operation is performed and no media is playing for the
selected period, the projector will automatically enter
screen saver mode. Press any button on the remote control
to exit screen saver mode.
Go to Settings
→
About to view the Device Model, UI
Version, Android Version, Memory, Storage, and Serial
Number. You can also perform a Local Upgrade or Online
Upgrade from this menu.
Wireless Screen Mirroring
Connect your iOS or Android device and the projector to the
same Wi-Fi network.
On the projector, go to:
Home
→
My Apps
→
ScreenCast
Open ScreenCast, enable screen mirroring on your phone or
tablet, and select the projector to connect.
Disposal of Waste Electrical & Electronic Equipment (WEEE)
This symbol on the product or its packaging indicates that
this productmust not be treated as household waste. Instead,
it shall be handedover to the applicable collection point for
the recycling of electrical andelectronic equipment. For more
detailed information about recyclingthis product, please contact
your local city office or your household wastedisposal service.
System information
Device Safety
• Please pay attention to important information related to the
operation and maintenance of this device. Read this information
carefully to avoid problems. Following these safety precautions
will extend the service life of the device.
• Except as mentioned in this manual, consult qualified
personnel for installation and repair services. Do not use
damaged power cords, accessories or other peripheral devices.
• Keep the device away from flammable, explosive, strong
electromagnetic interference (large radar stations, power
stations, substations) and strong ambient light (avoid direct
sunlight) areas.
• Do not wrap or cover the device with any material that may
block the ventilation openings.
• Use only the standard power cord supplied with this device for
power supply.
• Ensure adequate ventilation space and that the ventilation
holes are not blocked to prevent excessive heat accumulation
inside the projector.
• Do not look directly into the lens while the projector is on.
This may cause serious eye injury.
• Do not bend or pull the power cord excessively.
Disclaimer
All images and function descriptions in this product manual are
based on the actual product and factory preset content. We are
committed to continuously improving product performance and
enhancing product functions. We reserve the right to modify the
product functions and interfaces described in this manual
Need Help?
If you encounter any issues, please contact our
customer support team at [email protected].
You can also scan the QR code below to access
product operation guides, how-to videos, FAQs,
and other helpful support resources.
FCC Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
• This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including
interference that may cause undesired operation.
Warning:Changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body.
IC Statement
This device complies with Innovation, Science and Economic
Development Canada's licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and.
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
- French:"Le présent appareil est conforme aux CNR d’innova-
tion, sciences et développement économique Canada
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et.
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement."
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set
forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20cm
between the radiator & your body.
Déclaration d'exposition aux radiations IC:
Cet équipement est conforme aux limites d'exposition aux
radiations IC établies pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec une distance
minimale de 20cm entre le radiateur et votre corps.
Operation of this device in the band 5150-5250 MHz is
restricted to indoor use only.
Le fonctionnement de cet appareil dans la bande 5150-5250
MHz est limité à une utilisation en intérieur uniquement.
without prior notice. Please refer to the final actual product.
Please keep your device properly. We are not liable for any losses
caused by software or hardware misoperation, unauthorized
repair or any other reasons beyond our control. We shall not be
liable for any third-party claims arising from the use of this
product.
The function descriptions of this product have been carefully
reviewed and proofread by our staff. We apologize for any
omissions and welcome your corrections.
• Do not place the power cord under the projector or any heavy
objects.
• Do not cover the power cord with any soft materials.
• Do not heat the power cord.
• Do not touch the power plug with wet hands.
• The power plug serves as the disconnect device.
Language Settings
Bluetooth Settings
Settings → Bluetooth Settings: Turn on the Bluetooth switch,
press Search for Bluetooth devices and select the target
device to pair.
Go to Settings
→
Language & Keyboard
→
Language
Settings. Select your preferred language, then press OK to
confirm.
Date & Time Settings
Other Settings
Go to Settings
→
Date & Time Settings to configure
Automatic Date & Time, Date, Time, Time Zone, and
24-Hour Format.
Go to Settings
→
Other Settings to configure Button Sound,
Screen Saver, Scheduled Power Off, and Factory Reset.
Screen Saver
Go to Settings
→
Other Settings
→
Screen Saver to set the
screen saver activation time.
If no operation is performed and no media is playing for the
selected period, the projector will automatically enter
screen saver mode. Press any button on the remote control
to exit screen saver mode.
Go to Settings
→
About to view the Device Model, UI
Version, Android Version, Memory, Storage, and Serial
Number. You can also perform a Local Upgrade or Online
Upgrade from this menu.
Wireless Screen Mirroring
Connect your iOS or Android device and the projector to the
same Wi-Fi network.
On the projector, go to:
Home
→
My Apps
→
ScreenCast
Open ScreenCast, enable screen mirroring on your phone or
tablet, and select the projector to connect.
Disposal of Waste Electrical & Electronic Equipment (WEEE)
This symbol on the product or its packaging indicates that
this productmust not be treated as household waste. Instead,
it shall be handedover to the applicable collection point for
the recycling of electrical andelectronic equipment. For more
detailed information about recyclingthis product, please contact
your local city office or your household wastedisposal service.
System information
Device Safety
• Please pay attention to important information related to the
operation and maintenance of this device. Read this information
carefully to avoid problems. Following these safety precautions
will extend the service life of the device.
• Except as mentioned in this manual, consult qualified
personnel for installation and repair services. Do not use
damaged power cords, accessories or other peripheral devices.
• Keep the device away from flammable, explosive, strong
electromagnetic interference (large radar stations, power
stations, substations) and strong ambient light (avoid direct
sunlight) areas.
• Do not wrap or cover the device with any material that may
block the ventilation openings.
• Use only the standard power cord supplied with this device for
power supply.
• Ensure adequate ventilation space and that the ventilation
holes are not blocked to prevent excessive heat accumulation
inside the projector.
• Do not look directly into the lens while the projector is on.
This may cause serious eye injury.
• Do not bend or pull the power cord excessively.
Disclaimer
All images and function descriptions in this product manual are
based on the actual product and factory preset content. We are
committed to continuously improving product performance and
enhancing product functions. We reserve the right to modify the
product functions and interfaces described in this manual
Need Help?
If you encounter any issues, please contact our
customer support team at [email protected].
You can also scan the QR code below to access
product operation guides, how-to videos, FAQs,
and other helpful support resources.
FCC Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
• This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including
interference that may cause undesired operation.
Warning:Changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body.
IC Statement
This device complies with Innovation, Science and Economic
Development Canada's licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and.
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
- French:"Le présent appareil est conforme aux CNR d’innova-
tion, sciences et développement économique Canada
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et.
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement."
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set
forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20cm
between the radiator & your body.
Déclaration d'exposition aux radiations IC:
Cet équipement est conforme aux limites d'exposition aux
radiations IC établies pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec une distance
minimale de 20cm entre le radiateur et votre corps.
Operation of this device in the band 5150-5250 MHz is
restricted to indoor use only.
Le fonctionnement de cet appareil dans la bande 5150-5250
MHz est limité à une utilisation en intérieur uniquement.
without prior notice. Please refer to the final actual product.
Please keep your device properly. We are not liable for any losses
caused by software or hardware misoperation, unauthorized
repair or any other reasons beyond our control. We shall not be
liable for any third-party claims arising from the use of this
product.
The function descriptions of this product have been carefully
reviewed and proofread by our staff. We apologize for any
omissions and welcome your corrections.
• Do not place the power cord under the projector or any heavy
objects.
• Do not cover the power cord with any soft materials.
• Do not heat the power cord.
• Do not touch the power plug with wet hands.
• The power plug serves as the disconnect device.
Language Settings
Bluetooth Settings
Settings → Bluetooth Settings: Turn on the Bluetooth switch,
press Search for Bluetooth devices and select the target
device to pair.
Go to Settings
→
Language & Keyboard
→
Language
Settings. Select your preferred language, then press OK to
confirm.
Date & Time Settings
Other Settings
Go to Settings
→
Date & Time Settings to configure
Automatic Date & Time, Date, Time, Time Zone, and
24-Hour Format.
Go to Settings
→
Other Settings to configure Button Sound,
Screen Saver, Scheduled Power Off, and Factory Reset.
Screen Saver
Go to Settings
→
Other Settings
→
Screen Saver to set the
screen saver activation time.
If no operation is performed and no media is playing for the
selected period, the projector will automatically enter
screen saver mode. Press any button on the remote control
to exit screen saver mode.
Go to Settings
→
About to view the Device Model, UI
Version, Android Version, Memory, Storage, and Serial
Number. You can also perform a Local Upgrade or Online
Upgrade from this menu.
Wireless Screen Mirroring
Connect your iOS or Android device and the projector to the
same Wi-Fi network.
On the projector, go to:
Home
→
My Apps
→
ScreenCast
Open ScreenCast, enable screen mirroring on your phone or
tablet, and select the projector to connect.
Disposal of Waste Electrical & Electronic Equipment (WEEE)
This symbol on the product or its packaging indicates that
this productmust not be treated as household waste. Instead,
it shall be handedover to the applicable collection point for
the recycling of electrical andelectronic equipment. For more
detailed information about recyclingthis product, please contact
your local city office or your household wastedisposal service.
System information
Device Safety
• Please pay attention to important information related to the
operation and maintenance of this device. Read this information
carefully to avoid problems. Following these safety precautions
will extend the service life of the device.
• Except as mentioned in this manual, consult qualified
personnel for installation and repair services. Do not use
damaged power cords, accessories or other peripheral devices.
• Keep the device away from flammable, explosive, strong
electromagnetic interference (large radar stations, power
stations, substations) and strong ambient light (avoid direct
sunlight) areas.
• Do not wrap or cover the device with any material that may
block the ventilation openings.
• Use only the standard power cord supplied with this device for
power supply.
• Ensure adequate ventilation space and that the ventilation
holes are not blocked to prevent excessive heat accumulation
inside the projector.
• Do not look directly into the lens while the projector is on.
This may cause serious eye injury.
• Do not bend or pull the power cord excessively.
Disclaimer
All images and function descriptions in this product manual are
based on the actual product and factory preset content. We are
committed to continuously improving product performance and
enhancing product functions. We reserve the right to modify the
product functions and interfaces described in this manual
Need Help?
If you encounter any issues, please contact our
customer support team at [email protected].
You can also scan the QR code below to access
product operation guides, how-to videos, FAQs,
and other helpful support resources.
FCC Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
• This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including
interference that may cause undesired operation.
Warning:Changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body.
IC Statement
This device complies with Innovation, Science and Economic
Development Canada's licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and.
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
- French:"Le présent appareil est conforme aux CNR d’innova-
tion, sciences et développement économique Canada
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et.
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement."
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set
forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20cm
between the radiator & your body.
Déclaration d'exposition aux radiations IC:
Cet équipement est conforme aux limites d'exposition aux
radiations IC établies pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec une distance
minimale de 20cm entre le radiateur et votre corps.
Operation of this device in the band 5150-5250 MHz is
restricted to indoor use only.
Le fonctionnement de cet appareil dans la bande 5150-5250
MHz est limité à une utilisation en intérieur uniquement.
without prior notice. Please refer to the final actual product.
Please keep your device properly. We are not liable for any losses
caused by software or hardware misoperation, unauthorized
repair or any other reasons beyond our control. We shall not be
liable for any third-party claims arising from the use of this
product.
The function descriptions of this product have been carefully
reviewed and proofread by our staff. We apologize for any
omissions and welcome your corrections.
• Do not place the power cord under the projector or any heavy
objects.
• Do not cover the power cord with any soft materials.
• Do not heat the power cord.
• Do not touch the power plug with wet hands.
• The power plug serves as the disconnect device.
Language Settings
Bluetooth Settings
Settings → Bluetooth Settings: Turn on the Bluetooth switch,
press Search for Bluetooth devices and select the target
device to pair.
Go to Settings
→
Language & Keyboard
→
Language
Settings. Select your preferred language, then press OK to
confirm.
Date & Time Settings
Other Settings
Go to Settings
→
Date & Time Settings to configure
Automatic Date & Time, Date, Time, Time Zone, and
24-Hour Format.
Go to Settings
→
Other Settings to configure Button Sound,
Screen Saver, Scheduled Power Off, and Factory Reset.
Screen Saver
Go to Settings
→
Other Settings
→
Screen Saver to set the
screen saver activation time.
If no operation is performed and no media is playing for the
selected period, the projector will automatically enter
screen saver mode. Press any button on the remote control
to exit screen saver mode.
Go to Settings
→
About to view the Device Model, UI
Version, Android Version, Memory, Storage, and Serial
Number. You can also perform a Local Upgrade or Online
Upgrade from this menu.
Wireless Screen Mirroring
Connect your iOS or Android device and the projector to the
same Wi-Fi network.
On the projector, go to:
Home
→
My Apps
→
ScreenCast
Open ScreenCast, enable screen mirroring on your phone or
tablet, and select the projector to connect.
Disposal of Waste Electrical & Electronic Equipment (WEEE)
This symbol on the product or its packaging indicates that
this productmust not be treated as household waste. Instead,
it shall be handedover to the applicable collection point for
the recycling of electrical andelectronic equipment. For more
detailed information about recyclingthis product, please contact
your local city office or your household wastedisposal service.
System information
Device Safety
• Please pay attention to important information related to the
operation and maintenance of this device. Read this information
carefully to avoid problems. Following these safety precautions
will extend the service life of the device.
• Except as mentioned in this manual, consult qualified
personnel for installation and repair services. Do not use
damaged power cords, accessories or other peripheral devices.
• Keep the device away from flammable, explosive, strong
electromagnetic interference (large radar stations, power
stations, substations) and strong ambient light (avoid direct
sunlight) areas.
• Do not wrap or cover the device with any material that may
block the ventilation openings.
• Use only the standard power cord supplied with this device for
power supply.
• Ensure adequate ventilation space and that the ventilation
holes are not blocked to prevent excessive heat accumulation
inside the projector.
• Do not look directly into the lens while the projector is on.
This may cause serious eye injury.
• Do not bend or pull the power cord excessively.
Disclaimer
All images and function descriptions in this product manual are
based on the actual product and factory preset content. We are
committed to continuously improving product performance and
enhancing product functions. We reserve the right to modify the
product functions and interfaces described in this manual
Need Help?
If you encounter any issues, please contact our
customer support team at [email protected].
You can also scan the QR code below to access
product operation guides, how-to videos, FAQs,
and other helpful support resources.
FCC Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
• This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including
interference that may cause undesired operation.
Warning:Changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body.
IC Statement
This device complies with Innovation, Science and Economic
Development Canada's licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and.
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
- French:"Le présent appareil est conforme aux CNR d’innova-
tion, sciences et développement économique Canada
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et.
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement."
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set
forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20cm
between the radiator & your body.
Déclaration d'exposition aux radiations IC:
Cet équipement est conforme aux limites d'exposition aux
radiations IC établies pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec une distance
minimale de 20cm entre le radiateur et votre corps.
Operation of this device in the band 5150-5250 MHz is
restricted to indoor use only.
Le fonctionnement de cet appareil dans la bande 5150-5250
MHz est limité à une utilisation en intérieur uniquement.
without prior notice. Please refer to the final actual product.
Please keep your device properly. We are not liable for any losses
caused by software or hardware misoperation, unauthorized
repair or any other reasons beyond our control. We shall not be
liable for any third-party claims arising from the use of this
product.
The function descriptions of this product have been carefully
reviewed and proofread by our staff. We apologize for any
omissions and welcome your corrections.
• Do not place the power cord under the projector or any heavy
objects.
• Do not cover the power cord with any soft materials.
• Do not heat the power cord.
• Do not touch the power plug with wet hands.
• The power plug serves as the disconnect device.
Language Settings
Bluetooth Settings
Settings → Bluetooth Settings: Turn on the Bluetooth switch,
press Search for Bluetooth devices and select the target
device to pair.
Go to Settings
→
Language & Keyboard
→
Language
Settings. Select your preferred language, then press OK to
confirm.
Date & Time Settings
Other Settings
Go to Settings
→
Date & Time Settings to configure
Automatic Date & Time, Date, Time, Time Zone, and
24-Hour Format.
Go to Settings
→
Other Settings to configure Button Sound,
Screen Saver, Scheduled Power Off, and Factory Reset.
Screen Saver
Go to Settings
→
Other Settings
→
Screen Saver to set the
screen saver activation time.
If no operation is performed and no media is playing for the
selected period, the projector will automatically enter
screen saver mode. Press any button on the remote control
to exit screen saver mode.
Go to Settings
→
About to view the Device Model, UI
Version, Android Version, Memory, Storage, and Serial
Number. You can also perform a Local Upgrade or Online
Upgrade from this menu.
Wireless Screen Mirroring
Connect your iOS or Android device and the projector to the
same Wi-Fi network.
On the projector, go to:
Home
→
My Apps
→
ScreenCast
Open ScreenCast, enable screen mirroring on your phone or
tablet, and select the projector to connect.
Disposal of Waste Electrical & Electronic Equipment (WEEE)
This symbol on the product or its packaging indicates that
this productmust not be treated as household waste. Instead,
it shall be handedover to the applicable collection point for
the recycling of electrical andelectronic equipment. For more
detailed information about recyclingthis product, please contact
your local city office or your household wastedisposal service.
System information
Device Safety
• Please pay attention to important information related to the
operation and maintenance of this device. Read this information
carefully to avoid problems. Following these safety precautions
will extend the service life of the device.
• Except as mentioned in this manual, consult qualified
personnel for installation and repair services. Do not use
damaged power cords, accessories or other peripheral devices.
• Keep the device away from flammable, explosive, strong
electromagnetic interference (large radar stations, power
stations, substations) and strong ambient light (avoid direct
sunlight) areas.
• Do not wrap or cover the device with any material that may
block the ventilation openings.
• Use only the standard power cord supplied with this device for
power supply.
• Ensure adequate ventilation space and that the ventilation
holes are not blocked to prevent excessive heat accumulation
inside the projector.
• Do not look directly into the lens while the projector is on.
This may cause serious eye injury.
• Do not bend or pull the power cord excessively.
Disclaimer
All images and function descriptions in this product manual are
based on the actual product and factory preset content. We are
committed to continuously improving product performance and
enhancing product functions. We reserve the right to modify the
product functions and interfaces described in this manual
Need Help?
If you encounter any issues, please contact our
customer support team at [email protected].
You can also scan the QR code below to access
product operation guides, how-to videos, FAQs,
and other helpful support resources.
FCC Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
• This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including
interference that may cause undesired operation.
Warning:Changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body.
IC Statement
This device complies with Innovation, Science and Economic
Development Canada's licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and.
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
- French:"Le présent appareil est conforme aux CNR d’innova-
tion, sciences et développement économique Canada
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et.
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement."
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set
forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20cm
between the radiator & your body.
Déclaration d'exposition aux radiations IC:
Cet équipement est conforme aux limites d'exposition aux
radiations IC établies pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec une distance
minimale de 20cm entre le radiateur et votre corps.
Operation of this device in the band 5150-5250 MHz is
restricted to indoor use only.
Le fonctionnement de cet appareil dans la bande 5150-5250
MHz est limité à une utilisation en intérieur uniquement.
without prior notice. Please refer to the final actual product.
Please keep your device properly. We are not liable for any losses
caused by software or hardware misoperation, unauthorized
repair or any other reasons beyond our control. We shall not be
liable for any third-party claims arising from the use of this
product.
The function descriptions of this product have been carefully
reviewed and proofread by our staff. We apologize for any
omissions and welcome your corrections.
• Do not place the power cord under the projector or any heavy
objects.
• Do not cover the power cord with any soft materials.
• Do not heat the power cord.
• Do not touch the power plug with wet hands.
• The power plug serves as the disconnect device.
Language Settings
Bluetooth Settings
Settings → Bluetooth Settings: Turn on the Bluetooth switch,
press Search for Bluetooth devices and select the target
device to pair.
Go to Settings
→
Language & Keyboard
→
Language
Settings. Select your preferred language, then press OK to
confirm.
Date & Time Settings
Other Settings
Go to Settings
→
Date & Time Settings to configure
Automatic Date & Time, Date, Time, Time Zone, and
24-Hour Format.
Go to Settings
→
Other Settings to configure Button Sound,
Screen Saver, Scheduled Power Off, and Factory Reset.
Screen Saver
Go to Settings
→
Other Settings
→
Screen Saver to set the
screen saver activation time.
If no operation is performed and no media is playing for the
selected period, the projector will automatically enter
screen saver mode. Press any button on the remote control
to exit screen saver mode.
Go to Settings
→
About to view the Device Model, UI
Version, Android Version, Memory, Storage, and Serial
Number. You can also perform a Local Upgrade or Online
Upgrade from this menu.
Wireless Screen Mirroring
Connect your iOS or Android device and the projector to the
same Wi-Fi network.
On the projector, go to:
Home
→
My Apps
→
ScreenCast
Open ScreenCast, enable screen mirroring on your phone or
tablet, and select the projector to connect.
Disposal of Waste Electrical & Electronic Equipment (WEEE)
This symbol on the product or its packaging indicates that
this productmust not be treated as household waste. Instead,
it shall be handedover to the applicable collection point for
the recycling of electrical andelectronic equipment. For more
detailed information about recyclingthis product, please contact
your local city office or your household wastedisposal service.
System information
Device Safety
• Please pay attention to important information related to the
operation and maintenance of this device. Read this information
carefully to avoid problems. Following these safety precautions
will extend the service life of the device.
• Except as mentioned in this manual, consult qualified
personnel for installation and repair services. Do not use
damaged power cords, accessories or other peripheral devices.
• Keep the device away from flammable, explosive, strong
electromagnetic interference (large radar stations, power
stations, substations) and strong ambient light (avoid direct
sunlight) areas.
• Do not wrap or cover the device with any material that may
block the ventilation openings.
• Use only the standard power cord supplied with this device for
power supply.
• Ensure adequate ventilation space and that the ventilation
holes are not blocked to prevent excessive heat accumulation
inside the projector.
• Do not look directly into the lens while the projector is on.
This may cause serious eye injury.
• Do not bend or pull the power cord excessively.
Disclaimer
All images and function descriptions in this product manual are
based on the actual product and factory preset content. We are
committed to continuously improving product performance and
enhancing product functions. We reserve the right to modify the
product functions and interfaces described in this manual
Need Help?
If you encounter any issues, please contact our
customer support team at [email protected].
You can also scan the QR code below to access
product operation guides, how-to videos, FAQs,
and other helpful support resources.
FCC Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
• This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including
interference that may cause undesired operation.
Warning:Changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body.
IC Statement
This device complies with Innovation, Science and Economic
Development Canada's licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and.
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
- French:"Le présent appareil est conforme aux CNR d’innova-
tion, sciences et développement économique Canada
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et.
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement."
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set
forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20cm
between the radiator & your body.
Déclaration d'exposition aux radiations IC:
Cet équipement est conforme aux limites d'exposition aux
radiations IC établies pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec une distance
minimale de 20cm entre le radiateur et votre corps.
Operation of this device in the band 5150-5250 MHz is
restricted to indoor use only.
Le fonctionnement de cet appareil dans la bande 5150-5250
MHz est limité à une utilisation en intérieur uniquement.
without prior notice. Please refer to the final actual product.
Please keep your device properly. We are not liable for any losses
caused by software or hardware misoperation, unauthorized
repair or any other reasons beyond our control. We shall not be
liable for any third-party claims arising from the use of this
product.
The function descriptions of this product have been carefully
reviewed and proofread by our staff. We apologize for any
omissions and welcome your corrections.
• Do not place the power cord under the projector or any heavy
objects.
• Do not cover the power cord with any soft materials.
• Do not heat the power cord.
• Do not touch the power plug with wet hands.
• The power plug serves as the disconnect device.
Language Settings
Bluetooth Settings
Settings → Bluetooth Settings: Turn on the Bluetooth switch,
press Search for Bluetooth devices and select the target
device to pair.
Go to Settings
→
Language & Keyboard
→
Language
Settings. Select your preferred language, then press OK to
confirm.
Date & Time Settings
Other Settings
Go to Settings
→
Date & Time Settings to configure
Automatic Date & Time, Date, Time, Time Zone, and
24-Hour Format.
Go to Settings
→
Other Settings to configure Button Sound,
Screen Saver, Scheduled Power Off, and Factory Reset.
Screen Saver
Go to Settings
→
Other Settings
→
Screen Saver to set the
screen saver activation time.
If no operation is performed and no media is playing for the
selected period, the projector will automatically enter
screen saver mode. Press any button on the remote control
to exit screen saver mode.
Go to Settings
→
About to view the Device Model, UI
Version, Android Version, Memory, Storage, and Serial
Number. You can also perform a Local Upgrade or Online
Upgrade from this menu.
Wireless Screen Mirroring
Connect your iOS or Android device and the projector to the
same Wi-Fi network.
On the projector, go to:
Home
→
My Apps
→
ScreenCast
Open ScreenCast, enable screen mirroring on your phone or
tablet, and select the projector to connect.
Disposal of Waste Electrical & Electronic Equipment (WEEE)
This symbol on the product or its packaging indicates that
this productmust not be treated as household waste. Instead,
it shall be handedover to the applicable collection point for
the recycling of electrical andelectronic equipment. For more
detailed information about recyclingthis product, please contact
your local city office or your household wastedisposal service.
System information
Device Safety
• Please pay attention to important information related to the
operation and maintenance of this device. Read this information
carefully to avoid problems. Following these safety precautions
will extend the service life of the device.
• Except as mentioned in this manual, consult qualified
personnel for installation and repair services. Do not use
damaged power cords, accessories or other peripheral devices.
• Keep the device away from flammable, explosive, strong
electromagnetic interference (large radar stations, power
stations, substations) and strong ambient light (avoid direct
sunlight) areas.
• Do not wrap or cover the device with any material that may
block the ventilation openings.
• Use only the standard power cord supplied with this device for
power supply.
• Ensure adequate ventilation space and that the ventilation
holes are not blocked to prevent excessive heat accumulation
inside the projector.
• Do not look directly into the lens while the projector is on.
This may cause serious eye injury.
• Do not bend or pull the power cord excessively.
Disclaimer
All images and function descriptions in this product manual are
based on the actual product and factory preset content. We are
committed to continuously improving product performance and
enhancing product functions. We reserve the right to modify the
product functions and interfaces described in this manual
Need Help?
If you encounter any issues, please contact our
customer support team at [email protected].
You can also scan the QR code below to access
product operation guides, how-to videos, FAQs,
and other helpful support resources.
FCC Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules.These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
• This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including
interference that may cause undesired operation.
Warning:Changes or modifications not expressly approved by
the party responsible for compliance could void the user's
authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body.
IC Statement
This device complies with Innovation, Science and Economic
Development Canada's licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and.
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
- French:"Le présent appareil est conforme aux CNR d’innova-
tion, sciences et développement économique Canada
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et.
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement."
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set
forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20cm
between the radiator & your body.
Déclaration d'exposition aux radiations IC:
Cet équipement est conforme aux limites d'exposition aux
radiations IC établies pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec une distance
minimale de 20cm entre le radiateur et votre corps.
Operation of this device in the band 5150-5250 MHz is
restricted to indoor use only.
Le fonctionnement de cet appareil dans la bande 5150-5250
MHz est limité à une utilisation en intérieur uniquement.
without prior notice. Please refer to the final actual product.
Please keep your device properly. We are not liable for any losses
caused by software or hardware misoperation, unauthorized
repair or any other reasons beyond our control. We shall not be
liable for any third-party claims arising from the use of this
product.
The function descriptions of this product have been carefully
reviewed and proofread by our staff. We apologize for any
omissions and welcome your corrections.
• Do not place the power cord under the projector or any heavy
objects.
• Do not cover the power cord with any soft materials.
• Do not heat the power cord.
• Do not touch the power plug with wet hands.
• The power plug serves as the disconnect device.
Language Settings
Bluetooth Settings
Settings → Bluetooth Settings: Turn on the Bluetooth switch,
press Search for Bluetooth devices and select the target
device to pair.
Go to Settings
→
Language & Keyboard
→
Language
Settings. Select your preferred language, then press OK to
confirm.
Date & Time Settings
Other Settings
Go to Settings
→
Date & Time Settings to configure
Automatic Date & Time, Date, Time, Time Zone, and
24-Hour Format.
Go to Settings
→
Other Settings to configure Button Sound,
Screen Saver, Scheduled Power Off, and Factory Reset.
Screen Saver
Go to Settings
→
Other Settings
→
Screen Saver to set the
screen saver activation time.
If no operation is performed and no media is playing for the
selected period, the projector will automatically enter
screen saver mode. Press any button on the remote control
to exit screen saver mode.
Go to Settings
→
About to view the Device Model, UI
Version, Android Version, Memory, Storage, and Serial
Number. You can also perform a Local Upgrade or Online
Upgrade from this menu.
Wireless Screen Mirroring
Connect your iOS or Android device and the projector to the
same Wi-Fi network.
On the projector, go to:
Home
→
My Apps
→
ScreenCast
Open ScreenCast, enable screen mirroring on your phone or
tablet, and select the projector to connect.
Disposal of Waste Electrical & Electronic Equipment (WEEE)
This symbol on the product or its packaging indicates that
this productmust not be treated as household waste. Instead,
it shall be handedover to the applicable collection point for
the recycling of electrical andelectronic equipment. For more
detailed information about recyclingthis product, please contact
your local city office or your household wastedisposal service.
