docs.smarttech.com/kb/172109
1044375 - Rev 01
1
Draft
Certification and Compliance
SMART
®
MultiStylus
Model: PQR-3
Electronic (e-label) information
Regulatory information is available in the display’s
settings.
From the Home menu, tap Settings About
Regulatory Information.
Federal Communication Commission
interference statement
FCC
Suppliers Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier: PQR-3
Responsible Party – U.S. Contact Information
SMART Technologies (Seattle) Inc.
11100 NE 8th St., Suite 210
Bellvue, WA 98004
FCC ID: QCI-PQRMOD3
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received,
including interference that may cause undesired
operation.
Note
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required
to correct the interference at his own expense.
Caution
Any changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate this equipment.
Radiation exposure statement
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This transmitter must
not be co-located or operated in conjunction with any other
antenna or transmitter.
Innovation, Science and Economic
Development Canada statement
IC: 4302A-PQRMOD3
This device complies with RSS-247 of the Innovation, Science
and Economic Development Canada Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
Radiation exposure statement
This equipment complies with ISED radiation exposure limits
set forth for an uncontrolled environment. This transmitter
must not be co-located or operated in conjunction with any
other antenna or transmitter.
Draft
Certification and Compliance
docs.smarttech.com/kb/172109
1044375 - Rev 01
2
Innovation, Science et Développement
économique Déclaration du Canada
IC: 4302A-PQRMOD3
Cet appareil est conforme à la norme ISED CNR-247 pour les
appareils radio agréés. Son fonctionnement est soumis aux
deux conditions suivantes:
1. le dispositif ne doit pas produire de brouillage
préjudiciable, et
2. ce dispositif doit accepter tout brouillage reçu, y compris
un brouillage susceptible de provoquer un
fonctionnement indésirable.
Déclaration d’exposition aux radiations
Cet équipement est conforme aux limites d’exposition aux
rayonnements ISED établies pour un environnement non
contrôlé. Cet émetteur ne doit pas être co- implantés ou
exploités conjointement avec une autre antenne ou émetteur.
EU Declaration of Conformity
Hereby, SMART Technologies ULC declares that the PQR-3
complies with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at
the following Internet address: smarttech.com/compliance
Warning
Operation of this equipment in a residential environment
could cause radio interference.
The frequency band and the maximum transmitted power in
EU are listed below:
Transmitting Band (MHz) Maximum Transmit Power
2402 - 2483.5 4.0 dBm (EIRP)
Hardware environmental compliance
SMART Technologies supports global efforts to ensure that
electronic equipment is manufactured, sold, and disposed of in
a safe and environmentally friendly manner.
Waste
Electrical
and
Electronic
Equipment
(WEEE)
Electrical and electronic equipment
contain substances that can be
harmful to the environment and to
human health. The crossed-out
wheeled bin symbol indicates that products
should be disposed of in the appropriate
recycling stream and not as regular waste.
More
information
See smarttech.com/compliance for more
information.
REACH regulation
The products supplied are compliant with Regulation (EC) No
1907/2006 (REACH). They do not contain Substances of Very
High Concern (SVHC) listed on the ECHA Candidate List in
concentrations above allowed threshold.
