
v3.02-2026
Read these instructions carefully before using your appliance, and keep it carefully.
If you follow the instructions, your appliance will provide you with many years of good service.
INDUCTION RANGE
MODEL NUMBER
FFSIN0905-30
INSTRUCTION MANUAL
ENGLISH
®

2
TABLE OF CONTENTS
Customer Care 4
Warning 5
Important Safety 7
Name Of Parts 8
Control Panel 9
Operating Instruction
• Timer.................................................................................
• Cook Time .......................................................................
• Delay Start ......................................................................
• Setting .............................................................................
• Child Key Function ..........................................................
• Error Alarm Message .......................................................
• Cooktop ...........................................................................
• Preheating .......................................................................
Oven Settings:
• Bake .........................................................................
• Broil ..........................................................................
• Warm / Proof ............................................................
Convection Settings:
• Conv. Bake ...............................................................
• Conv. Broil ...............................................................
• Conv. Roast .............................................................
• Convection Conversion.....................................................
10
11
11
11
12
12
12
13
13
14
15
16
17
18
19
Range Care
• Cleaning ...........................................................................
• Oven Self-cleaning ...........................................................
• Oven Door Removal .........................................................
• Oven Light Replacement ..................................................
20
21
22
24
Troubleshooting 24
Warranty 27

3
INDUCTION RANGE
MODEL NUMBER
FFSIN0905-30

4
Product Information Servince Information
Model Number:
Use these numbers in any
correspondence or services calls
concerning your product.
If you received a damaged product,
immediately contact Forno.
To save time and money, before
you call for serviced, check the
troubleshooting guide. It listed the
causes of minor operation problems
that you can correct yourself.
Serial Number:
Date of Purchase:
Purchase Address And Phone:
Thank you for purchasing a Frono product. Please read the entire instruction manual before operating your new appliance
for the rst time. Whether you are an occasional user or an expert, it will be benecial to familiarize yourself with the safety
practices, features, operation and care recommendations of your appliance.
Both the model and serial number are listed inside the product. For warranty purposes, you will also need the date of
purchase .
Record this information below for future reference.
Customer Care
Services in Canada and Untied States
Keep the instruction manual handy to answer your questions. You can also nd all the information you need online at
www.forno.ca.
If you don’t understand something or need more assistance, please visit our website or email: [email protected]
If there is a problem, please contact FORNO customer service. Please note that troubleshooting with a customer service
representative will be needed before being able to send a service provider. All warranty work needs to be authorized by
FORNO customer service. All our authorized service providers are carefully selected and rigorously trained by us.
S/N:FFSIN0905-30/XXXXXXX
Model Number
Serial Number
Model And Serial Number Location

5
WARNING
FOR YOUR SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you
and others. Al l safety messages will follow the safety alert symbol and either the word “DANGER,”
“WARNING” or “CAUTION.” These words mean:
• You can be killed or seriously injured if you don’t immediately follow instructions.
• You can be killed or seriously injured if you don’t follow instructions.
• A potentially hazardous situation which, if not avoided, could result in minor or
moderate injury.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
DANGER
WARNING
CAUTION
WARNING : This product can expose you to chemicals including [Lead, lead
and lead compound, which is [are] known to the state of California to cause
cancer and birth defects or other reproductive harm. For more information go
to www.P65Warning.ca.gov.

6
WARNING
FOR YOUR SAFETY
Tip Over Hazard
• A child or adult can tip the range and be killed.
• Install anti-tip bracket to oor or wall per installation instructions.
• Slide range back so rear range foot is engaged in the slow of the anti-tip bracket.
• Re-engage the anti-tip bracket if range is moved.
• Do not operate the range without anti-tip bracket installed and engaged.
• Failure to follow these instructions can result in death or serious burns to children and adults.
Making sure the anti-tip bracket is installed:
• Slide range forward.
• Look for the anti-tip bracket securely attached to oor and wall.
• Slide range back so rear range foot is under anti-tip bracket.
Anti-Tip
Bracket
Range
Foot

7
WARNING: To reduce the risk of re, electrical shock,
injury to persons, or damage when using the range, follow
basic precautions, including the following:
• WARNING: TO REDUCE THE RISK OF TIPPING OF
THE RANGE, THE RANGE MUST BE SECURED BY
PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK IF
THE DEVICES ARE INSTALLED PROPERLY, SLIDE THE
RANGE COMPLETELY FORWARD, LOOK FOR THE ANTI-
TIP BRACKET SECURELY ATTACHED TO THE FLOOR
BEHIND THE RANGE, AND SLIDE RANGE COMPLETELY
BACK UNTIL THE REAR RANGE FOOT IS UNDER ANTI-
TIP BRACKET.
• WARNING: NEVER use this appliance as a space heater
to heat or warm the room. Doing so may result in carbon
monoxide poisoning and overheating of the oven.
• WARNING: NEVER cover any slots, holes, or passages
in the oven bottom or cover an entire rack with materials
such as aluminum foil. Doing so blocks airow through
the oven and may cause carbon monoxide poisoning.
Aluminum foil linings may also trap heat, causing a re
hazard.
• CAUTION: Do not store items of interest to children in
cabinets above a range or on the back guard of a range
–children climbing onto the range to reach items could be
seriously injured.
• DO NOT LEAVE Children Alone –Children should not
be left alone or unattended in areas where the range is in
use. They should never be allowed to sit or stand on any
part of the range.
• Wear Proper Apparel – Loose-tting or hanging garments
should never be worn while using the range.
• User Servicing – Do not repair or replace any part of the
range unless specically recommended in the manual.
All other servicing should be referred to a qualied
technician.
• Flammable materials should not be stored in an oven or
near surface units.
• DO NOT USE WATER on Grease Fires – Smother re
or ame, use a dry chemical or foam-type extinguisher.
• Make sure your pot holders is dry. – Moist or damp pot
holders on hot surfaces may result in burns from steam.
Do not let pot holder touch hot heating elements. Do not
use a towel or other bulky cloth.
• DO NOT TOUCH SURFACE UNITS OR AREAS NEAR
UNITS – Surface units may be hot even though they
are dark in color. Areas near surface units may become
hot enough to cause burns. During and after use, do not
touch, or let clothing or other ammable materials contact
surface units or areas near units until they have had
sucient time to cool. Among those areas are the cook
top and surfaces facing the cook top.
• Never Leave Surface Units Unattended at High Heat
Settings – Boil over causes smoking and greasy
spillovers that may ignite.
• Glazed Cooking Utensils – Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed
utensils are suitable for range-top service without
breaking due to sudden temperature changes.
• Utensil Handles Should Be Turned Inward and Not
Important Safety Instructions
Extend Over Adjacent Surface Units – To reduce the risk
of burns, ignition of ammable materials, and spillage
due to unintentional contact with the utensil, the handle
of a utensil should be positioned so that it is turned
inward, and does not extend over adjacent surface units.
• Clean Cook top with Caution – If a wet sponge or cloth
is used to wipe spills on a hot cooking area, be careful to
avoid steam burn. Some cleaners can produce noxious
fumes if applied to a hot surface.
• CAUTION: When Opening Door, stand on the side of
the range and let the hot air or steam escape before
removing or replacing food.
• Do Not Heat Unopened Food Containers. - Build-up of
pressure may cause the container to burst and result in
injury.
• Keep Oven Vent Ducts free from obstructions.
• Oven Racks Placement – Always place oven racks in the
desired location while the oven is cool. If the rack must
be moved while the oven is hot, do not let the pot holder
in contact with the heated rack.
• DO NOT TOUCH HEATING ELEMENTS OR INTERIOR
SURFACES OF OVEN – Heating elements may be hot
even though they are dark in color. The interior surfaces
of an oven become hot enough to cause burns. During
and after use, do not touch, or let clothing or other
ammable materials in contact with heating elements
or interior surfaces of the oven until they have had
sucient time to cool. Other surfaces of the appliance
may become hot enough to cause burns – among these
surfaces are oven vent openings and surfaces near
these openings, oven doors, and windows of oven doors.
• Proper Installation – The range, when installed, must be
electrically grounded by local codes or, in the absence
of local codes, with the National Electrical Code, ANSI/
NFPA 70. In Canada, the range must be electrically
grounded by Canadian Electrical Code. Be sure the
range is properly installed and grounded by a qualied
technician.
• Disconnect the electrical supply before servicing the
appliance.
• Injuries may result from the misuse of appliance doors or
drawers such as stepping, leaning, or sitting on the doors
or drawers.
• Maintenance – Keep the range area clear and free from
combustible materials, gasoline, and other ammable
vapors and liquids.
• For units with ventilating hood
• Clean Ventilating Hoods Frequently – Grease should not
be allowed to accumulate on the hood or lter.
• When ambé cooking under the vent hood, turn the fan
on.
READ AND SAVE THESE INSTRUCTIONS
State of California Proposition 65 Warnings: WARNING:
This product contains one or more chemicals known to the
State of California to cause cancer. WARNING: This product
contains one or more chemicals known to the State of
California to cause birth defects or other reproductive harm.

8
Names of Parts and Accessories
1
2
3
4
5
6
7
8
9
10
11
12
13
13
Numbers
Parts Remark
1
Left Rear Burner: 1200 / 1500W(boost)
Heating area size: 140mm
Most suitable pan size: 140-160mm
Heating area size: 140mm
Most suitable pan size: 140-160mm
Heating area size: 185mm
NA
NA
NA
NA
Most suitable pan size: 180-200mm
Heating area size: 185mm
Most suitable pan size: 180-200mm
2 Left Front Burner: 1800 / 2100W(boost)
3 Control Panel
4
Anti-tip Bracket
5
Kick Plate
6
Right Rear Burner: 2300 / 3000W(boost)
7
Right Front Burner: 1200 / 1500W(boost)
8
Hot Surface Indicator Lights
NOTE: Antique brass Handle/Antique brass Knobs only for the White And Black Units.
Numbers Parts
9
Oven Door Window
10
Oven Vent
11 Broil Element
12 Door Gasket
13 Bottom Element (not visible)
14 Oven Light
15 Model and Serial Number Plate
16 Convection Fan
1x Air Fry Basket
1x Air Fry Rack
2x Forno Door Handle
(Stainless Steel & Antique Brass)
8x Forno Knobs
(Stainless Steel 4x & Antique Brass 4x)
8x Bezel
(Stainless Steel 4x & Antique Brass 4x)
2x Racks
1x Backsplash
1x Drip Pan 1x Hand tool
1x Anti-Tip Bracket
5x Screws (M4*8)
(For blacksplash Installation)
2x Screws (M5*45)
(For Anti-tip bracket)

9
Control Panel
A F
B G
N
M L K J I H
C
E
D
Numbers Parts
A
Front left burner
B
Rear left burner
C Oven modes
D LED display screen
E Start / Control lock (Hold 3 seconds)
F Rear right burner
G Front right burner
Numbers Parts
H Cancel
I Light
J Timer
K
Settings
L
Delay start
M
Cook time
N
Preset modes
Operating Instructions
Oven
Operating Mode Default temperature (°F) Adjustable range (°F) Preheat phase
Bake 350°F (177°C) 170-550°F (77-288°C) Yes
Bake Hi: 550°F (288°C) Hi-Lo: 450-550°F (233-288°C) No
Proof
(Press for 3 seconds in
Warm Mode temp)
100°F (38°C) 80-120°F (27-49°C) No
Warm 140°F(60°C) 140-210°F (27-49°F) No
CONV.
Mode
Conv. bake 325°F(163°C) 170-500°F (60-99°C) )Yes
Conv. broil 450°F (233°C) 170-550°F (77-288°C) No
Conv. Roast 325°F (163°C) 170-550°F (77-288°C) yes
Preset
1. Meats
350°F (177°C) 170-500°F (77-288°C) Yes
2. Baked
goods
3. Others
Air fry 420°F (216°C) 340-450°F (149-233°c) Yes
Self clean N/A Core up to 806°F(430 °C) No
Steam clean N/A N/A No
Note: The preheating stage indicates whether real-time display of temperature is required.
• There is a preheating stage: When the actual oven core temperature is less than 170°F, the interface displays Lo.
• When the actual core temperature of the oven is greater than or equal to 170°F, the interface displays the temperature
in real time.
• When the actual oven core temperature reaches the set value, the interface always displays the set temperature value.
• Non-preheating stage: the set temperature value is always displayed on the heating interface of the oven from the
beginning.

10
Operating Instructions (continued)
This multi-function oven combines the functions of traditional oven modes with the functions of modern, fan-assisted
convection modes in a single oven. Use the Cooking Mode control, located on the control panel, to select the oven mode.
IMPORTANT: During any cycle, the heating elements will turn o when the oven door is opened, and stay o until the door
is closed. To maintain oven temperature, limit door openings during cooking.
Using the oven for the rst time:
1. Make sure all packaging is remove inside the oven cavity. Before you being make sure door close.
2. Press the bake function button on the control panel. The display screen will light up with the default temperature and
cooking timer.
3. Set the temperature at 500ºF (260ºC) by pressing the number keypad on the control panel. If it exceeds, an invalid
sound “didi” will be emitted when pressing the Start button.
4. Click “Start” to begin the operation.
NOTE: When the actual temperature of the furnace core is lower than 170°F, the temperature on the digital screen will display “Lo”. When
the actual temperature of the furnace core is higher than 170°F, the interface will display the current temperature in real time. Once the core
temperature has reached the set value, the display will show the set value and no longer change to real-time.
5. Let the oven to operate for 30 Minutes with the door close and no food in the cavity.
6. Turn o the oven, and then open the oven door to allow the oven to cool.
NOTE: Any odor that may be detected during this initial use is due to the evaporation of substances used to protect the oven during storage.
General:
IMPORTANT: Do not place anything, including dishes, foil and oven trays, on the bottom of the oven when it is in
operation to avoid damaging the enamel.
1. Place bakeware with food on one or both of the shelves provided with the oven.
2. Close the oven door,
NOTE: The oven cannot be set with the door open.
3. Press the desired oven mode ie. BAKE.
4. Set the oven to the desired temperature.
5. Press START.
Timer:
There are two ways to set up a timer.
Set up 1:
Press the “TIMER” button on the control panel and there will be (--:--) appear on the display screen. Press the numbers
on the keypad to the time you wish to use, then press Timer button again to activate. The longest allowed to set a time for
12 hours.
Set up 2: To have the timer activated during oven operation.
1. Select the desired oven mode and temperature.
2. There will be “02:00” on screen. By default the oven has a “Cook Time” that is set for 2H. You can still set your timer
with “Cook Time” is on.
345
02:00
345
02:00
--:--
345
02:00
345
02:00
--:--

11
3. You can set the timer before or after the preheat. If you wish to set timer after it’s preheated and food is inside the
oven, press the “TIMER” button. On the display, you will see(--:--). Press the numbers on the keypad to the time you
wish to use. To activate the timer, press the “TIMER” button again. There will be a word “Timer” the display on the
screen:
If the timer has been set in the process of preheating, the timer will be activate as soon as the temperature has reach
it set value.
NOTE: The timer will not automatically “shut o when it reached the end of the time. You will have to manually shut it o by pressing “ Timer”.
Cook Time:
What is “Cook Time”? “Cook Time” has a similar functionality as a timer, but the only dierence is that the oven will
automatically “Shut O” the unit. The “Cook Time” works for the oven only. By Default the cook time will be set for 2H
(02:00). You can re-set the “Cook Time” During or after the preheating. If its set during the preheat, the “Cook Time” will be
activate as soon as the temperature has reach it set value.
• How to program the “Cook Time”:
Press the “Cook Time” button and set the time by using the number keypad. After the time is set, Press the “Start” to
begin the operation. To know that the “Cook Time” is activated, the word “Timed” will be display on the screen:
Note. If the value exceeds the allowed setting range, the next operation is not allowed, and the system makes two
invalid beeps.
Operating Instructions (continued)
Delay Start:
Only works when the oven is being used.
Select the baking function you wish to use. Then press the “Delay Start” button on the control panel.
On screen, the current time will display If you wish to start in 10 minutes, you will add 10 minutes to the current time.
Then press start to activate the delay. The display will show the countdown from 10 minutes and it will begin to preheat.
Example: If the time is 2:15 pm, you will press 2:25 pm. 00:10 will appear.
345
00:10
345
02:15
02:25
Current Time
Settings:
Press the “Setting” button on the control panel. To go through its selections, you must press the “Setting” button
repeatedly. The table below will provide the list of the 7 “Settings”, their functions and congurable.
List of settings Function Display Conguration Default
Clock To set the clock time
--:-- Timed
Press the
Number keypad and
then "Start"
12:00 pm
Temp. Unit
Switch from
ºC - ºF
f unit
Press #1 to switch
OF
Sound On or O
on Snd
Press #1 to switch
On
Calibration
To adjust the oven temperature for
more accurate settings.
00 ºF C_al
Press #1: Change mode
Press #3: To increase
Press #6 :To decrease
00 ºF
(-30ºF - 30ºF)
Demo Mode For demonstration purpose
off Demo
Press #1 to switch
off
12 / 24H Change hour time
12H
Press #1 to switch
12h
Sabbath Sabbath Mode
off Sabb
Press #1 to switch
off
345
02:00
345
02:00
--:--
Timer is activated

12
COOKTOP USE
1. Place a suitable pan on the cooking zone you wish to use. How to tell if your existing pan can be used for induction
range. Place a magnet at the bottom of the pan and pay attention if the magnet sticks to the pan. If so, then the pan is
suitable for induction. If the magnet does not stick to the pan, then the pan is NOT suitable for the induction. Note: A
non induction pan, will not work on the induction range.
2. Select the heating zone you wish to use. Make sure the bottom of the pan and the surface of the cooking zone are
clean and dry. Turn the control knob clockwise.
3. Adjust the power level up /down by turning the control knob clockwise/anti-clockwise. The power levels range from 1-9
as well as Boost (P) settings. You can modify the power level at any time..
Operating Instructions (continued)
-
-
2
-
The relevant indicator on the
hob for that zone will show
the power level selected.
Indicator Icons & Symbols:
Icons & Symbols: Function
H
“H” is the cooking zone is too hot to touch. It will disappear when the surface has cooled down
to a safe temperature.
U
The burner is activated but not in use
P
Boost is activated
OFF
6
P
9
8
7 5
4
3
1
Child key function:
When the oven is on standby, Press the “Start” button and hold for 3 seconds. The control panel is now locked. When
other keys are touched, the child lock icon on the screen blinks and an invalid tone is heard concurrently. When ready to
use the oven, press “Start” button and hold it for 3 seconds for the control panel to be unlocked.
Error alarm message:
Abnormal Temperature sensor: Err1
In any state, if the temperature sensor is open or short, the oven will give an alarm and display Err1. In this case, cancel
can be performed.

13
OVEN SETTINGS
1. Bake:
• Use one rack when selecting the bake mode.
• On occasion, check the oven to see if your food is done.
• Use metal bakeware (with or without a non-stick nish), heatproof glass, glass ceramic, pottery, or other utensils
suitable for the oven.
•For best results, bake food on a single rack with at least 1” - 1½” (2.5 - 4 cm) space between bakeware and oven
walls.
• When using heatproof glass, reduce temperature by 25°F (15°C) from recommended temperature. Use baking
sheets with or without sides or jelly roll pans.
• Dark metal pans or nonstick coatings will cook faster with more browning. Insulated bakeware will slightly lengthen
the cooking time for most foods.
Baking is cooking with heated air. Both upper and lower elements in the oven are used. Follow
the recipe or convenience food directions for baking temperature, time, and rack position.
Baking time will vary with the temperature of ingredients and the size, shape, and nish of the
baking utensil . The temperature can be set from 170°F (77°C) to
500°F (260°C).
Operating Instructions (continued)
Activating the Boost Function:
1. Turn the control knob clockwise all the way to “P”. The “P” will be activated and it will display on the indicator. The
boost function will remain on for 5 minutes, after that the zone will set to level 9 automatically.
2. To cancel the boost function, turn the knob anticlockwise to “9”.
Note: you can activate two boost function at the same time except for the right rear burner(3000W).
PREHEATING
When beginning a Bake, Convection Bake or Convection Roast cycle, the oven will begin preheating after Start is
pressed. The oven will take approximately 12 to 15 minutes to reach 350°F (177°C) with all of the oven racks provided
with your oven inside the oven cavity. Higher temperatures will take longer to preheat. The preheat cycle rapidly increases
the oven temperature. The actual oven temperature will go above your set temperature to oset the heat lost when you
open the oven door to place the food on the rack. This ensures that cooking will begin at the proper temperature. Do not
open the door while the oven is preheating. When the oven has heated to the set temperature, a tone will sound. You can
then open the door and place food in the oven.
5
2
1
6
Most baked goods (4&3)
Roasting (2&1)
Toasting or Broiling (6&5)
4
3
5
2
1
6
4
3
Multiple Rack (5-2)

14
Food Item Rack Position
Temp. °F (°C)
(Preheated Oven)
Time (Min)
Cupcakes 2 350(175) 19-22
Bunt Cake 1 350(175) 40-45
Angel Food 1 350(175) 35-39
Pie 2 crust, fresh, 9” 2
375-400
(190-205)
45-50
2 crust, frozen fruit, 9” 2 375(190) 68-78
Cookies Sugar 2
350-375
(175-190)
8-10
Chocolate Chip cookies 2
350-375
(175-190)
8-13
Brownies 2 350(175) 29-36
Yeast bread loaf 9 x 5 2 375(190) 18-22
Yeast rolls 2
375-400
(190-205)
12-15
Biscuits 2
375-400
(190-205)
7-9
Muns 2 425 (220) 15-19
Frozen Pizza 2
400-450
(205-235)
23-26
Fresh Pizza 2 425 (246) 15-18
Operating Instructions (continued)
Bake chart Oven Function:
2. Broil:
• For best results, use a two-piece broiler pan with a grid (not provided). It is designed to drain juices which helps to
avoid spatter and smoke.
• For proper draining, do not cover the grid with foil. The bottom of the pan may be lined with aluminum foil for easier
cleaning.
• Trim excess fat to reduce spattering. Slit the remaining fat on the edges to avoid curling.
• Select HI Broil 550°F (288°C) for most broiling. Select LO Broil 450°F (232°C) for low-temperature broiling for foods
that take longer to cook, such as poultry, to avoid over browning.
• Pull out oven rack to stop position before turning or removing food. Use tongs to turn food to avoid the loss of juices.
Very thin cuts of sh, poultry or meat may not need to be turned.
• After broiling, remove the pan from the oven when removing the food. Drippings will bake on the pan if left in the
heated oven, making cleaning more dicult.
• Position food on grid in the broiler pan, then place it in the center of the oven rack. Close the oven door and set the
control.
NOTE: If you used Cook Time or Delay Start to set a cook time, the oven will turn o automatically.
Broiling uses direct radiant heat to cook food. The lower the temperature, the slower the
cooking. Thicker cuts and unevenly shaped pieces of meat, sh and poultry may cook better
at lower broiling temperatures. The temperature can be set from LO at 450°F (232°C) to HI at
550°F (288°C).
Tips: The oven door remains closed during broil. When inspecting the food, open the oven door no
more than two inches.
).
• Do not use aluminum foil or disposable aluminum trays to line any part of the oven. Foil is an excellent heat insulator
and heat will be trapped beneath it. This will alter the cooking performance and can damage the nish of the oven.
You can line a baking tray with foil and use this on the bottom shelf.
• Avoid using the opened door as a shelf to place pans.
• See Troubleshooting for tips on solving baking and roasting problems.

15
Operating Instructions (continued)
The Warm mode keeps hot, cooked foods at serving temperature. The temperature for “warm”
can be set from 140°F (60°C) to 210°F (99°C). The temperature for “proof” can be set from
80°F (27°C) to 120°F (49°C).
TIPS: Food must be at serving temperature before placing in the warmed oven. Food may be held up to 1 hour;
however, breads and casseroles may become too dry if left in the oven during the Warm function. For best results,
cover food.
3. Warm / Proof:
WARNING
Food Poisoning Hazard
Do not let food sit in the oven for more than one hour before or after cooking.
Doing so can result in food poisoning or sickness.
IMPORTANT: Food must be at serving temperature before placing it in the warmed oven. Food may be held up to 1 hour;
however, breads and casseroles may become too dry if left in the oven during the Warm function. For best results, cover
food.
Warm:
1. Press “WARM/PROOF” on the controller panel. “WARM” will be display on the screen.
2. Press “START”, if you wish to warm food at 170°F (78°C) OR enter the desired temperature by pressing the number
keypad, and then press START. The temperature can be set from 140°F (60°C) to 210°F (99°C).
NOTE: you have the option to set a Cook Time
3. Press CANCEL when nished, and remove food from the oven.
* Broiling and convection broiling times are approximate and may vary slightly. Cooking times are indicative and also depend on the thickness
and the starting temperature of the meat before cooking.
Food And Thickness
Rack
Position
Broil Setting.
°F (°C)
Level of
Doneness
SIDE 1
Time (Min)
SIDE 2
Time (Min)
BEEF
Steak (3/4"-1) 5 550 (290)
-Medium Rare
-Medium
-Well Done
- (5 - 7)
- (6 - 8)
- (8 - 10)
- (4 - 6)
- (5 - 7)
- (7 - 0)
Hamburgers (3/4"-1") 4 550 (290)
-Medium
-Well Done
- (8 - 11)
- (10-13)
- (6 - 9)
- (8 - 10)
POULTRY
Breast (bone-in) 4 450 (235) Well Done (10 - 12) (8 - 10)
Thigh (very well done) 4 550 (290) Well Done (28 - 30) (13 - 15)
PORK
Pork Chops (1") 5 550 (290) Well Done (7- 9) (5 - 7)
Sausage - fresh 5 550 (290) Well Done (5 - 7) (3 - 5)
Ham Slice (½") 5 550 (290) Well Done (4 - 6) (3 - 5)
SEAFOOD
Fish Filets, 1" Buttered 4 450 (235) Well Done (10 - 14) Do not turn
LAMB
Chops (1") 5 550 (290)
-Medium Rare
-Medium
-Well Done
- (5 - 7)
- (6 - 8)
- (7 - 9)
- (4 - 6)
- (4 - 6)
- (5 - 7)
BREAD
Garlic Bread, 1" slices
4
3
550 (290)
- (2 - 2:30)
- (4 - 6)

16
Operating Instructions (continued)
1. Convection Bake:
• Use Convection Bake for single or multiple rack baking. Reduce standard recipe baking temperature by 25°F (15°C).
• For best results, foods should be cooked uncovered, in low-sided pans to take advantage of the forced air circulation.
Use shiny aluminum pans for best results unless otherwise specied.
• Heatproof glass or ceramic can be used. Reduce temperature by another 25°F (15°C) when using heatproof glass
dishes for a total reduction of 50°F (30°C).
• Dark metal pans may be used. Note that food may brown faster when using dark metal bake ware.
• The number of racks used is determined by the height of the food to be cooked.
• Baked items, for the most part, cook extremely well in convection. Don’t try to convert recipes such as custards,
quiches, pumpkin pie, or cheesecakes, which do not benet from the convection-heating process. Use the regular
Bake mode for these foods.
• Multiple rack cooking for oven meals is done on rack positions 1, 2, 3 , 4, 5 and 6. All positions can be used for
cookies, biscuits and appetizers.
- 2 Rack baking: Use positions 1 and 3.
- 3 rack baking: Use positions 2, 3 and 4 or 1, 3 and 5.
• When baking four cake layers at the same time, stagger pans so that one pan is not directly
above another. For best results, place cakes on front of upper rack and back of lower rack.
Allow 1” - 11/2” (2.5 - 4 cm) air space around pans.
Compared to BAKE mode, Convection Bake adds the use of convection fan(s) to circulate
heated air. So both the temperature and the cooking time may be slightly reduced.
Tips: When convection baking, reduce your recipe baking temperature by 25°F.
1¹⁄2”
2 at the front
2 at the rear
CONVECTION SETTINGS
During convection cooking, the fan provides hot air circulation throughout the oven. The movement of heated air around
the food can help to speed up cooking by penetrating the cooler outer surfaces. Food cooks more evenly, browning and
crisping outer surfaces while sealing moisture inside. When the oven is set to the Convection function, the ring element,
bake and broil elements, and the fan operate to heat the oven cavity. If the oven door is opened during convection cooking
or preheating, the fan turns o immediately and the element(s) will turn o after 30 seconds. Once the door is closed, the
element(s) will automatically turn on.
Convection Fan
The convection fan operates during any convection mode. When the oven is operating in convection mode, the fan will
turn o automatically when the door is opened. The convection fan may run in non-convection modes during the preheat
time.
Proof:
What is proof? Proong is a term used in baking to describe the process of allowing yeast dough to rise before baking.
The “Proof” setting on the oven provides a warm temperature specically designed to create an ideal environment for
yeast to rise during the proong process. This setting helps to maintain a consistent and controlled temperature, ensuring
optimal conditions for the yeast to ferment and the dough to rise eectively.
Before proong, place the dough in a lightly greased bowl and cover loosely with wax paper, coated with shortening.
Place on second rack from the bottom and close the oven door.
1. Press “WARM/PROOF” and hold for 3 seconds until “WARM” on the display screen switch to “proof”.
2. Press START, if you wish to Proof dough at 100°F (38°C) OR enter the desired temperature by pressing the number
keypad, and then press START. The temperature can be set from 80°F (27°C) to 120°F (49°C).
NOTE: you have the option to set a Cook Time
3. Let the dough rise until nearly doubled in size, checking after 20-25 minutes. Proong time may vary depending on
dough type and quantity.
4. Press CANCEL when nished.
5. Before second proong, shape the dough, place it in baking pan(s) and cover loosely with plastic wrap, coated with
cooking spray. Follow the same placement and control steps above. Before baking, remove the plastic wrap.

17
Operating Instructions (continued)
Food Item Rack Position
Temp. °F (°C)
(Preheated Oven)
Time (Min)
Cupcakes 2 350(175) 19-22
Bunt Cake 1 350(175) 40-45
Angel Food 1 350(175) 35-39
Pie 2 crust, fresh, 9” 2 375-400 (190-205) 45-50
2 crust, frozen fruit, 9” 2 375(190) 68-78
Cookies Sugar 2 350-375 (175-190) 8-10
Chocolate Chip cookies 2 350-375 (175-190) 8-13
Brownies 2 350(175) 29-36
Yeast bread loaf 9 x 5 2 375(190) 18-22
Yeast rolls 2 375-400 (190-205) 12-15
Biscuits 2 375-400 (190-205) 7-9
Muns 2 425 (220) 15-19
Frozen Pizza 2 400-450 (205-235) 23-26
Fresh Pizza 2 425 (246) 15-18
Convection Broil adds the use of convection fan(s) to circulate heated air. Bring the rack to the
middle of the cavity to provide evening cooking.
2. Convection Broil:
• Place rack in the required position needed before turning on the oven.
• Use Convection Broil mode with the oven door closed.
• When convection broiling, enter your normal broiling temperature.
• Do not preheat oven.
• Use the 2-piece broil pan.
• Turn meats once halfway through the cooking time. See the Convection Broil chart.
• Thicker cuts and unevenly shaped pieces of meat, sh and poultry may cook better at lower broiling temperatures.
Food And Thickness
Rack
Position
Broil Setting.
°F (°C)
Level of
Doneness
SIDE 1
Time (Min)
SIDE 2
Time (Min)
BEEF
Steak (1½” or more) 4 450 (235)
-Medium Rare
-Medium
-Well Done
- (9 - 12)
- (11 - 13)
- (18 - 20)
- (8 - 10)
- (10 - 12)
- (16 - 17)
Hamburgers (more than 1") 4 550 (290)
-Medium
-Well Done
- (8 - 11)
- (11-13)
- (5 - 7)
- (8 - 10)
POULTRY
Chicken Quarters 4 450 (235) Well Done (16 - 18) (10 - 13)
Chicken Halves 3 450 (235) Well Done (25 - 27) (15 - 18)
Chicken Breasts 4 450 (235) Well Done (13 - 15) (9 - 13)
PORK
Pork Chops (1¼" or more) 4 450 (235) Well Done (12 - 14) (11 - 13)
Sausage - fresh 4 450 (235) Well Done (4 - 6) (3 - 5)

18
Operating Instructions (continued)
Food And Thickness
Weight
(Lb)
Oven Temp.
°F (°C)
Rack
Position
Time
(Min. Per Lb)
Internal
Temp. °F (°C)
BEEF
Rib Roast - 4 - 6 325 (160) 2
16-20
18-22
-145 (63) Medium Rare
-160 (71) medium
Rib Eye Roast (boneless) - 4 - 6 325 (160) 2
16-20
18-22
-145 (63) Medium Rare
-160 (71) medium
Rump, Eye, Tip, Sirloin (boneless) - 3 - 6 325 (160) 2
16-20
18-22
-145 (63) Medium Rare
-160 (71) medium
Tenderloin Roast - 2 - 3 400 (205) 2 15-20 145 (63) Medium Rare
PORK
Loin Roast (boneless or bone-in) - 5 - 8 350 (205) 2 16-20 160 (71) medium
Shoulder - 3 - 6 400 (205) 2 20-25 160 (71) medium
POULTRY
Chicken whole- 3 - 4 375 (190) 2 18-21 180 (82)
Turkey, not stued -
12 - 15
16 - 20
21 - 25
325 (160)
325 (160)
325 (160)
1
1
1
10-14
9-11
6 - 11
-180 (82)
-180 (82)
-180 (82)
Turkey Breast - 3 - 8 325 (160) 1 15-20 170 (77)
Comish Hen - 1 - 1 ¹⁄2 350 (205) 2
45-75
total
180 (82)
3. Convection Roast:
• Do not preheat for Convection Roast.
• Roast in a low-sided, uncovered pan.
• When roasting whole chickens or turkey, tuck wings behind back and loosely tie legs with kitchen string.
• Use the 2-piece broil pan for roasting uncovered.
• Use the probe or a meat thermometer to determine the internal doneness.
• Double-check the internal temperature of meat or poultry by inserting meat thermometer into another position.
• Large poultry may need to be covered with foil (and pan roasted) during a portion of the roasting time to prevent over-
browning.
• The minimum safe temperature for stung in poultry is 165ºF (75ºC).
• After removing the food from the oven, cover loosely with foil for 10 to
• 15 minutes before carving if necessary to increase the nal foodstu temperature by 5° to 10°F (3° to 6° C).
When convection roasting, turn to your normal roasting temperature. The roasting time should
be 15-30% less than in conventional cooking. It is not necessary to preheat the oven for
Convection Roast.

19
Operating Instructions (continued)
Food And Thickness
Weight
(Lb)
Oven Temp.
°F (°C)
Rack
Position
Time
(Min. Per Lb)
Internal
Temp. °F (°C)
LAMB
Half Leg - 3 - 4 325 (160) 2
22 - 27
28 - 33
-160 (71) medium
-170 (77) well
Whole Leg - 6 - 8 325 (160) 1
22 - 27
28 - 33
-160 (71) medium
-170 (77) well
CONVECTION CONVERSION:
When using a Convection Recipe, enter your normal cooking temperature and time. The Convection Conversion mode
will adjust the temperature and time for perfect cooking results.
IMPORTANT:
• The oven door must be closed before selecting a Convection Conversion oven mode.
• Setting Cook Time is required for a Convection Conversion oven mode. If Cook Time was not set, the control will
prompt you to Set Cook Time. See “Cook Time.”
NOTE: At the end of the set Cook Time, the oven will turn o automatically, the end of cycle tone will sound and “Cooking Complete” will appear in
the display.
BAKED GOODS:
1. Press BAKED GOODS among the Convection Conversion controls.
2. Set the oven temperature.
NOTE: The temperature can be set from 170°F (77°C) to 500°F (260°C).
3. Press START. “Set cooking time” will appear in the display.
4. Press the number keypad to enter the desired cook time. “Press START” will appear in the display.
NOTE: If a delayed start time is desired, Press START TIME, and then press the number keypad to enter the desired start time. “Press START” will
appear the display. Set Cook Time is mandatory for the Convection Conversion oven mode. If Cook Time was not set, the control will prompt you to
“Set Cook Time.”
5. Press START. The oven begins to preheat. Once the set temperature has been reached, a tone will sound.
NOTE: If the recipe requires the food to be cooked in a preheated oven, add 15 minutes to Cook Time to allow time for the oven to preheat. Once
the oven is heated to the set temperature and the tone sounds, place food in the oven.
6. At the end of the set Cook Time the oven will turn o automatically, the end of cycle tone will sound and “Cooking
Complete” will appear in the display.
MEATS:
IMPORTANT: It is not necessary to preheat the oven for the convection conversion MEAT option.
1. Press MEATS among the Convection Conversion controls.
2. Set the oven temperature.
NOTE: The temperature can be set from 170°F (77°C) to 550°F (288°C).
3. Press START. “Set cooking time” will appear in the display.
4. Press the number keypad to enter the desired cook time. “Press START” will appear in the display.
NOTE: Set Cooking Time is mandatory for the Convection Conversion oven mode.
5. At the end of the set Cook Time the oven will turn o automatically, the end of cycle tone will sound and “Cooking
Complete” will appear in the display.
OTHER FOODS
1. Press OTHER FOODS among the Convection Conversion controls.
2. Set the oven temperature.
NOTE: The temperature can be set from 170°F (77°C) to 550°F (288°C).
3. Press START. “Set cooking time” will appear in the display.
4. Press the number keypad to enter the desired cook time. “Press START” will appear in the display.
NOTE: If a delayed start time is desired, Press START TIME, and then press the number keypad to enter the time-of-day you want the oven to turn
on. “Press START” will appear the display. Set Cook Time is mandatory for the Convection Conversion oven mode. If Cook Time was not set, the
control will prompt you to Set Cook Time.
* Internal Temp determine the level of doneness, it's important to check the internal temperature of the meat using a meat thermometer or an
instant-read thermometer.

20
5. Once START has been pressed, the oven begins to preheat. Once the set temperature has been reached, a tone will
sound.
NOTE: If the recipe requires the food to be cooked in a preheated oven, add 15 minutes to Cook Time to allow time for the oven to preheat. Once
the oven is heated to the set temperature and the tone sounds, place food in the oven.
6. At the end of the set Cook Time the oven will turn o automatically, the end of cycle tone will sound and “Cooking
Complete” will appear in the display.
AirFry:
The preset is set to operate at a temperature of 420°F (260°C) for a duration of 22 minutes. However, you have the option
to manually adjust the temperature and time settings before starting. Once you have set your desired temperature, the
“Timer” function will begin counting down as soon as the temperature reaches its set value.
NOTE: Adding a dripping pan under the fry basket when air frying is a good practice to catch any excess oil or drippings that may occur during the
cooking process. This can help prevent any mess or smoke caused by the drippings and make the cleaning process easier.
Operating Instructions (continued)
Range Care
CLEANING
IMPORTANT: Before cleaning, make sure all controls are turned o, and the oven and cooktop are cool. Always follow
label instructions on cleaning products. It is recommended that you rst use soap, water and a soft cloth or sponge unless
otherwise noted. Do not use abrasive cleaning products.
EXTERIOR PORCELAIN ENAMEL SURFACES:
Food spills containing acids, such as vinegar and tomato, should be cleaned as soon as the entire appliance is cool.
These spills may aect the nish.
Cleaning Method:
Glass cleaner, mild liquid cleaner or nonabrasive scrubbing pad: Gently clean around the model and serial number
plate because scrubbing may remove numbers.
EXTERIOR STAINLESS STEEL:
NOTE: Do not use soap-lled scouring pads, abrasive cleaners, cooktop polishing cream, steel-wool pads, gritty washcloths or some paper towels.
Damage may occur, even with one-time or limited use. Rub in direction of grain to avoid damaging.
Cleaning Methods:
Liquid detergent or all-purpose cleaner: Rinse well with clean water and dry with soft, lint-free cloth. Stainless Steel
Cleaner and Polish Vinegar for hard water spots
OVEN DOOR EXTERIOR:
Cleaning Method:
Glass cleaner and paper towels or nonabrasive plastic scrubbing pad: Apply glass cleaner to soft cloth or sponge, not
directly on panel.
CERAMIC GLASS COOKTOP
IMPORTANT: To avoid damaging the cooktop, do not use steel wool, abrasive powder cleansers, chlorine bleach, rust
remover or ammonia. Ceramic cooktop cleaning materials: cooktop cleaner, cooktop scraper and cooktop cleaning pads
are available at most grocery stores.
To Clean the Ceramic Glass Cooktop:
1. Remove food/residue with a cooktop scraper.
• For best results, use the cooktop scraper while the cooktop is still warm, but not hot to the touch.
• It is recommended to wear an oven mitt while scraping the warm cooktop.
• Hold the cooktop scraper at approximately a 45° angle against the glass surface and scrape the residue. It will be
necessary to apply pressure in order to remove the residue.
• Allow the cooktop to cool down completely before proceeding to Step 2.
2. Apply a few dime-sized drops of cooktop cleaner to the aected areas.
• Rub cooktop cleaner onto the cooktop surface with a nylon or similar cooktop cleaning pad. Some pressure is needed to
remove stubborn stains.
• Allow the cleaner to dry to a white haze before proceeding to Step 3.
3. Polish with a clean, dry cloth or a clean, dry paper towel.

21
SMUDGES FROM ALUMINUM BOTTOMED PANS:
Cleaning Method:
A cloth dampened in vinegar.
COOKTOP CONTROL KNOBS
• Pull knobs straight out from the control panel to remove.
• When replacing knobs, make sure knobs are turned to the O position.
Cleaning Method:
Soap and water or dishwasher:
NOTE: Do not use steel wool, abrasive cleansers or oven cleaner. Do not soak knobs.
CONTROL PANEL
Cleaning Method:
Glass cleaner and soft cloth or sponge: Apply glass cleaner to soft cloth or sponge, not directly on panel.
NOTE: Do not use abrasive cleaners, steel-wool pads, gritty washcloths or some paper towels. Damage may occur.
OVEN CAVITY
Food spills should be cleaned when oven cools. At high temperatures, foods react with porcelain, so staining, etching,
pitting or faint white spots can result.
Cleaning Method:
Mild detergent and warm water.
NOTE: Do not use oven cleaners
OVEN RACKS
Cleaning Method:
Steel-wool pad
OVEN SELF-CLEANING
The Self-Cleaning cycle uses very high temperatures, burning soil to a powdery ash.
IMPORTANT: The health of some birds is extremely sensitive to the fumes given o during the Self-Cleaning cycle.
Exposure to the fumes may result in death to certain birds. Always move birds to another closed and well-ventilated room.
NOTES:
• Self-clean the oven before it becomes heavily soiled. Heavy soil results in longer cleaning and more smoke.
• Keep the kitchen well-ventilated during the Self-Cleaning cycle to help get rid of heat, odors, and smoke.
• Do not clean, rub, damage or move the oven gasket. The door gasket is essential for a good seal.
• Allow the oven to cool to room temperature before using the Self- Clean feature. If your oven cavity is above 170°F
(77°C), “Oven Cooling” will appear in the display and the Self-Clean cycle will not activate until it cools down.
• The oven light will not work during the Self-Cleaning cycle. On some models, the surface elements will not work
during the Self-Cleaning cycle.
• When “LOCK” shows in the display, the oven door cannot be opened. To avoid damage to the door, do not force the
door open when “LOCK” is displayed.
Range Care (continued)
WARNING
Burn Hazard
• Do not touch the oven during the Self-Cleaning cycle.
• Keep children away from oven during Self-Cleaning cycle.
• Failure to do so can result in burns.

22
3. Close the oven door as far as it will shut.
4. While grasping both outside edges of the oven door, lift up on the door.
5. Continue to push the top of the door closed while pulling the bottom of the door out of the hinge receivers in the door
frame.
Range Care (continued)
Prepare Oven:
• Remove the broiler pan, cookware and bakeware and, on some models, the temperature probe from the oven.
• Remove oven racks to keep them shiny and easy to slide. See “General Cleaning” section for more information.
• Remove any foil from the oven because it may burn or melt, damaging the oven.
• Hand clean inside door edge and the 1½" (3.8 cm) area around the inside oven cavity frame, being certain not to move
or bend the gasket. This area does not get hot enough during self-cleaning to remove soil. Do not let water, cleaner,
etc., enter slots on door frame. Use a damp cloth to clean this area.
• Wipe out any loose soil to reduce smoke and avoid damage. At high temperatures, foods react with porcelain. Staining,
etching, pitting or faint white spots can result. This will not aect cooking performance.
To Self-Clean:
NOTE: The Cleaning time can be adjusted. Suggested cleaning times are:
2 Hours - Light soil
3.0 Hours - Average soil
3.5 Hours - Heavy soil.
1. Close the oven door.
2. Repeatedly touch the "Self Clean" icon to toggle between self clean time duration options
NOTE: The oven door will lock
3. "End" appears on the display and the oven door unlocks.
4. Open the oven door. Once the oven has completely cooled, remove ash with a damp cloth.
NOTE: To avoid breaking the glass, do not apply a cool, damp cloth to the inner door glass before it has cooled completely.
OVEN DOOR REMOVAL
For normal oven use, there is no need to remove the oven door. However, should it become necessary to remove the
door, follow the instructions in this section.
IMPORTANT:
• Make sure oven is cool and power to the oven has been turned o before removing the door.
• The oven door is heavy and fragile, and the door front is glass. To avoid oven door glass breakage, use both hands,
and grasp only the sides of the oven door to remove.
• Be sure that both levers are securely in place before removing the door.
To remove the oven door:
1. Open the oven door completely.
2. Lift up the hinge latch on each side.
Left hinge Right hinge

23
Range Care (continued)
To place back the oven door:
1. Insert both hanger arms into the hinge receivers in the door frame.
2. Slowly open the oven door, and you will feel the door set into place.
3. Move the hinge latches back into the locked position.
4. Check that the door opens and closes freely. If it does not, repeat the door removal and placing the oven door back.
Left hinge Right hinge

24
REPLACING AN OVEN LIGHT
The oven light is a standard 25-watt (G9) appliance bulb.
IMPORTANT: Before replacing the bulb, make sure the oven is cool and the controls are turned o.
1. Disconnect the power.
2. Remove the bulb cover by pulling it out of the opening.
3. Remove the burned-out bulb from the socket.
NOTE: To avoid damage or decreasing the life of the new bulb, do not touch the bulb with bare ngers. Wear gloves or
use a tissue when replacing the light bulb.
4. Replace the bulb, and then replace the bulb cover.
5. Reconnect the power.
Range Care (continued)
Troubleshooting
WARNING
Electrical Shock Hazard
• Make sure the oven and lights are cool and power to the oven has been turned o before replacing the light bulb(s).
• The lenses must be in place when using the oven. The lenses serve to protect the light bulb from breaking.
• The lenses are made of glass. Handle carefully to avoid breakage.
• Failure to do so could result in death, electric shock, cuts or burns.
With any oven setting poor results can occur for many reasons other than a malfunction of the oven. Check the chart
below for causes of the most common problems. Since the size, shape and material of baking utensils directly aect the
baking results, the best solution may be to replace old baking utensils that have darkened and warped with age and use.
Baking Issues Causes
Food browns unevenly • Oven not preheated
• Aluminum foil on oven rack or oven bottom
• Baking utensil too large for recipe
• Pans touching each other or oven walls
Food too brown on bottom • Oven not preheated
• Using glass, dull or darkened metal pans
• Incorrect rack position
• Pans touching each other or oven walls
Food is dry or has shrunk excessively • Oven not preheated
• Using glass, dull or darkened metal pans
• Incorrect rack position
• Pans touching each other or oven walls

25
Baking Issues Causes
Food is baking or roasting too slowly • Oven temperature too high
• Baking time too long
• Oven door opened frequently
• Pan size too large
Piecrusts do not brown on bottom or crust is soggy • Baking time not long enough
• Using shiny steel pans
• Incorrect rack position
• Oven temperature is too low
Cakes pale, at and may not be done inside • Oven temperature too low
• Incorrect baking time
• Cake tested too soon
• Oven door opened too often
• Pan size may be too large
Cakes high in middle with crack on top • Oven temperature too high
• Baking time too long
• Pans touching each other or oven walls
• Incorrect rack position
• Pan size too small
Piecrust edges too brown • Oven temperature too high
• Edges of crust too thin
Troubleshooting (continued)
• COOKTOP
Baking Issues Possible Causes Solutions
Heating elements and controls
do not work.
Fuse is blown or circuit breaker is tripped.
No electricity to the cooktop.
Replace the fuse or reset the
circuit breaker. If the problem
continues, call an electrician. Have
electrician check your power supply.
Heating elements do not heat
properly.
Improper cookware is being used. Select proper cookware. See
“Cookware.”
If the problem continues, call for
service.
Heating elements cycle o
even when elements are turned
to their highest settings.
Heating element temperature limiters are
temporarily shutting o the elements due
to exceeding the maximum allowable
temperature
This is a normal operating condition,
especially during rapid heat-up
operations. The element will cycle
back on automatically after it has
cooled suciently.
Glass ceramic surface is see
through or appears to be red in
color.
Under direct or bright lighting, you will
sometimes be able to see through the glass
and into the chassis due to its transparent
quality. You may also notice a red tint under
these conditions
These are normal properties of black
ceramic glass panels.
• OVEN
Baking Issues Possible Causes Solutions
Oven is not heating No power to the oven Replace the fuse or reset the circuit breaker. If the problem
continues, call an electrician.
Oven control not turned on Make sure the oven temperature
Oven door is not closed Close the oven door. The heating elements turn o when the
door is opened and remain o until the oven door is closed.
Oven is not cooking
evenly
Not using the correct bake ware or
oven rack position
Refer to cook charts for recommended rack position. Always
reduce recipe temperature by 25 °F (15 °C) when baking
with Convention Bake mode.

26
Troubleshooting (continued)
Induction Cooktop Indicator Error Codes
Error Codes Possible Causes Solutions
Baking Issues Possible Causes Solutions
Oven display stays Power interruption
box). Turn breaker back on. If condition persists, call for
service.
Oven mode and
temperature
controls cannot be
set.
The oven door is open. Close the oven door. The oven mode and temperature
controls cannot be set if the oven door is open.
Cooling fan
continues to run
after oven is turned
The electronic components have
Oven light is not
working properly
Light bulb loose or burned-out. Reinsert or replace the light bulb. Touching the bulb with
Oven light stays on Door is not closing completely Check for obstruction in oven door. Check to see if hinge is
bent or door switch broken.
Cannot remove
lens cover
Soil build-up around the lens cover. Wipe lens cover area with a clean, dry towel prior to
attempting to remove the lens cover.
Clock and timer
are not working
properly
No power to the oven Check the circuit breaker or fuse box to your house. Make
sure there is proper electrical power to the oven.
Excessive Moisture
Bake and Convection Roast will eliminate any moisture in
the oven.
Porcelain Chips
E1
E2
E3
E4/E5
E6
E7/E8
E9
EE
Replace the according induction module.Data synchronization loss
Check the input voltage and change to the correct voltage.
Input voltage too high
Input voltage too low
The according induction module
damaged
The inducion module is too hot Cool down the range and restart. If E9 happens agailn,
check if oven coling fan desn't work well. Change the oven
cooling fan or change the whole according induction module.
Communication failure
The communication line of induction LED display poor
contacts. Or the line needs to be changed.
Protection against dry heating
function
The according induction module
short circuit
Check the input voltage and change to the correct voltage.
Replace the according induction module.
Cut off the power of range. And restart the range.
E6 will disappear.
Replace the according induction module.
Porcelain interior is bumped by
oven racks
When removing and replacing oven racks, always tilt
racks upward and do not force them to avoid chipping the
porcelain.

27
Warranty
What this limited warranty covers:
The Warranty coverage provided by Forno Appliances in
this statement applies exclusively to the original Forno
appliance (“Product”) sold to the consumer (“Purchaser”)
by an authorized Forno dealer/distributor/retailer,
purchased and installed in the United States or Canada,
and which has always remained within the original country
of purchase (the United States or Canada). Warranty
coverage is activated on the date of the Product’s original
retail purchase and has a duration of two (2) years.
Warranty coverage is non-transferable. In the event
of replacement of parts or of the entire product, the
replacement Product (or parts) shall assume the remaining
original Warranty activated with the original retail purchase
document. This Warranty shall not be extended with
respect to such replacement. Forno Appliances will repair
or replace any component/part which fails or proves
defective due to materials and/or workmanship within 2
years of the date of the original retail purchase and under
conditions of ordinary residential, non-commercial use.
Repair or replacement will be free of charge, including
labor at standard rates and shipping expenses. Purchaser
is responsible for making the Product reasonably
accessible for service. Repair service must be performed
by a Forno Authorized Service company during normal
working hours.
Important
Retain proof of original purchase to establish warranty
period. Forno’s liability on any claim of any kind, with
respect to the goods and/or services provided, shall in
no event exceed the value of the goods or service or part
there of which has given rise to the claim.
30-Day Cosmetic Warranty
The Purchaser must inspect the product at the time of
delivery. Forno warrants that the Product is free from
manufacturing defects in materials and workmanship for
a period of thirty (30) days from date of the original retail
purchase of the Product.
This coverage includes:
• Paint blemishes
• Chips
• Macroscopic nish defects
Cosmetic warranty does NOT cover:
• Issues resulting from incorrect transport, handling and/
or installation (e.g.: dents, broken, warped or deformed
structures or components, cracked or otherwise
damaged glass components);
• Slight color variations on painted/enameled
components;
• Dierences caused by natural or articial lighting,
location or other analogous factors; > stains/corrosion/
discoloration caused by external substances and/
or environmental factors; > labor costs, display, oor,
B-stock, out- of-box,“as is” appliances and demo units.
How to receive service
To receive warranty services, the Purchaser must contact
the Forno Support department in order to determine
the problem and the required service procedures.
Troubleshooting with a customer service representative
will be necessary before moving forward with the service.
Model number, serial number and date of original retail
purchase will be requested.
Warranty Exclusions: What Is Not Covered.
• Use of the Product in any non-residential, commercial
application.
• Use of the Product for anything other than its intended
purpose.
• Repair services provided by anyone other than a
Forno Authorized Service agency.
• Damages or repair services to correct services
provided by unauthorized parties or the use of
unauthorized parts.
• Installation not in accordance with local/state/city/
county re codes, electrical codes, gas codes,
plumbing codes, building codes, laws or regulations.
• Defects or damage due to improper storage of the
Product.
• Defects, damage or missing parts on products sold
out of the original factory packaging or from displays.
> Service calls or repairs to correct an incorrect
installation of the Product and/or related accessories.
• Replacement of parts/service calls to connect, convert
or otherwise repair the electrical wiring and/or gas line
in order to properly use the product.
• Replacement of parts/service calls to provide
instructions and information on the use of the Product.
• Replacement of parts/service calls to correct issues
arising from the product being used in a manner other
than what is normal and customary for residential use.
• Replacement of parts/service calls due to wear
and tear of components such as seals, knobs, pan
supports, shelving, cutlery baskets, buttons, touch
displays, scratched or broken ceramic-glass tops.
• Replacement of parts/service calls for lack of/improper
maintenance, including but not limited to: build up of
residues, stains, scratches, discoloration, corrosion.
• Defects and damages arising from accidents,
alteration, misuse, abuse or improper installation.
• Defects and damages arising from Product transport,
logistics and handling. Inspection of the product
must be made at time of delivery. Following receipt
and inspection, the selling dealer/delivery company
must be notied of any issues arising from handling,
transport and logistics.
• Defects and damages arising from external forces
beyond the control of Forno Appliances, including
but not limited to wind, rain, sand, res, oods,
mudslides, freezing temperatures, excessive moisture
or extended exposure to humidity, power surges,

28
lightning, structural failures surrounding the appliance and other acts of God.
• Products whose serial number has been altered/damaged/tampered with. In no case shall Forno be held liable or
responsible for damage to surrounding property, including furniture, cabinetry, ooring, panels, and other structures
surrounding the Product. Forno is neither liable nor responsible for the Product if it is located in a remote area or an
area where certied trained technicians are not reasonably available. Purchaser must bear any transportation and
delivery costs of the Product to the nearest Authorized Service Center or the additional travel expenses of a certied
trained technician
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE THAT SHALL APPLY
AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM
OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON FORNO. FORNO SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR
PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, TIME AWAY FROM WORK, MEALS, LOSS OF FOOD OR BEVERAGES, TRAVELING OR
HOTEL EXPENSES, EXPENSES TO RENT OR PURCHASE APPLIANCES, REMODELING/CONSTRUCTION EXPENSES IN EXCESS OF DIRECT DAMAGES
WHICH ARE UNDENIABLY CAUSED EXCLUSIVELY BY FORNO OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE
USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF FORNO
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST FORNO BE GREATER IN AMOUNT
THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY FORNO AND CAUSING THE ALLEGED DAMAGE. WITHOUT PREJUDICE TO THE FOREGOING,
PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS
AND THEIR PROPERTY ARISING FROM THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT SOLD BY FORNO THAT IS NOT A DIRECT RESULT OF
NEGLIGENCE ON THE PART OF FORNO THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS
PRODUCT, IS NON-TRANSFERABLE, AND STATES YOUR EXCLUSIVE REMEDY.
