Model: ACDP100
DryPod
Reusable Moisture
Absorber
User Manual
Fire Safety
Electrical Safety
•
•
•
•
•
•
•
Placement & Operation
•
•
•
that turns power on/off automatically, may cause overheating.
•
Only operate using the voltage shown on the rating label.
After powering on, if there is no main body, the indicator will flash white. When
When powered on, keep more than 10cm away from other objects to improve
airflow and prevent overheating. If it is damaged, contact Ausclimate
Customer Service.
•
•
•
•
•
•
YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF
THE INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL.
WARNING - Do not connect to an external switching device (e.g. timer) or circuit
Do not cover the unit, this can cause overheating, fire risk, and may disable
the safety fuse.
Keep flammable items (curtains, bedding, clothing) at least 1 metre from the
air outlet.
Keep away from petrol, paint, or other flammable liquids or vapours.
Keep away from heat sources such as stoves, radiators, or open flames.
Do not operate the drying base in enclosed spaces such as wardrobes or
cupboards.
Always unplug when not in use, before cleaning, or when moving the unit.
Ensure hands are dry before touching the plug or appliance.
Plug directly into a wall socket. Avoid unsuitable power boards.
Use only a correctly rated and undamaged extension cord, if required.
Never operate with the power cord coiled, heat can build up.
Fully unwind cord before use and avoid twisting, kinking, or wrapping it around
the appliance.
Always unplug by gripping the plug, not the cord.
Inspect the cord regularly. Do not use if damaged, worn, or if the unit has been
dropped or is malfunctioning.
If the cord is damaged, it must be replaced by the manufacturer, service agent,
or qualified technician.
the main body is placed, the indicator turns green and the machine starts
working. Hot airflow during operation is normal.
Important Safety Information
•
•
•
•
•
•
•
Place on a flat, stable, heat-resistant surface.
Only use indoors, protect from rain and moisture.
Keep the DryPod upright while cleaning.
Wipe the outer body with a soft, dry cloth to remove dust or dirt.
To remove any marks or residue, wipe gently with a slightly damp cloth only.
Do not immerse the DryPod in water or use harsh cleaning products.
Before cleaning or maintaining the DryPod or drying base, ensure the power
is switched off at the outlet and the plug is removed.
This appliance is not intended for use by individuals (including children) with
reduced physical, sensory, or mental capabilities without supervision.
Ensure the drying base is switched off at the outlet and unplugged before cleaning.
•
•
•
•
Keep the drying base upright during cleaning.
Wipe the drying base with a soft, dry cloth to remove dust.
If required, use a slightly damp cloth to clean the surface.
•
Do not allow water or liquid to enterthedrying base
Do not place on bedding or thick carpet that could block airflow.
Children must be supervised to ensure they do not play with the appliance.
Cleaning & Maintenance
Cleaning the Drying Base
Cleaning your DryPod
Children & Supervision
•
Important Safety Information
YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE
INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL.
Components
Warning Label
Components
Note: After powering on, if there is no main body, the indicator will flash white. When
the main body is placed, the indicator turns green and the machine starts working.
Hot air flow during operation is normal.
About Your DryPod
What is a DryPod?
DryPod is designed to help reduce excess moisture in small enclosed spaces such
as wardrobes, cupboards, bathrooms, cars, caravans, drawers, and storage areas.
As the silica gel absorbs moisture from the air, it can help reduce dampness,
condensation, musty odours, and moisture damage to stored items.
Once saturated, simply place the unit onto the drying base to restore and reuse it.
Important: DryPod is designed for small enclosed spaces only. It is not intended to
dry whole rooms, large bathrooms, or areas with ongoing leaks or excessive
humidity.
What are Silica Beads?
DryPod works by using silica gel beads to absorb moisture from the air. Silica gel is
a highly absorbent material that attracts and holds water vapour.
When placed in an enclosed space, air naturally passes through the unit, and the
silica beads begin pulling moisture from the surrounding air. As the beads absorb
moisture, they gradually change colour, indicating they are full and need to be
dried.
To reuse the unit, it is placed onto a heating or drying base. The heat removes the
trapped moisture from the silica beads, restoring them so they can absorb moisture
again. Once dried, the beads return to their original colour, and the unit is ready for
reuse.
Silica bead dehumidifiers are best suited to small enclosed areas such as:
Usage
Before using the product for the first time, check the silica gel colour in the display
window.
• If the silica gel is orange, the product is ready to use.
• If the silica gel is dark green, place the unit onto the base and power it on until the
silica gel turns orange.
1.When the power is turned on, the indicator light will flash white. Once the main
body is correctly placed onto the base, the indicator light will turn green.
2.When the silica gel in the display window is orange, the product is ready to absorb
moisture and can be used in areas such as wardrobes, closets, cabinets, and other
enclosed spaces.
3.When the silica gel turns dark green, it means the product has absorbed moisture
and needs to be dried. Place the product on the base and begin heating to dry the
silica gel. During drying, the base will heat the unit to remove trapped moisture. Once
the cycle is complete, the indicator light will flash white. Once the silica gel returns to
orange, the DryPod is ready to use again.
Note: Drying time may vary depending on environmental conditions. If the silica gel
does not return to orange after one heating cycle (2 hours), remove the main body
from the base for more than 3 seconds, then place it back onto the base to begin
another heating cycle. This will help ensure all remaining moisture is fully removed.
Specifications
code :
Model Number
Product Size
Rated Input Voltage
Power
Working Capacity
ACDP100
120*120*270mm
220-240V 50/60Hz
50W
80-100ML
Dehumidifying Material
Drying cycle
Reusable silica moisture absorber only
SiO₂
Approx. 2 hours
ACDP100R
Troubleshooting
ISSUE
HOW TO FIX
DryPod not absorbing moisture well?
Use in a small enclosed space and keep doors or
drawers closed where possible.
Silica gel changing colour quickly?
This may indicate very high humidity levels in the
area. More frequent drying cycles may be required.
No indicator light showing?
Check the power outlet is switched on and ensure
the DryPod is correctly places onto the base.
DryPod has an unusual smell during
drying?
A slight warm or heated smell during the drying
cycle can be normal during first use.
Condensation or dampness still
present?
DryPod is designed to help reduce excess moisture
in small enclosed spaces. For larger rooms, ongoing
condensation, severe humidity, or moisture caused
by leaks and poor ventilation, an Ausclimate
dehumidifier may be more suitable.
2 Year Warranty
Ausclimate – New Zealand
CDB Media Ltd.
PO Box 100-707
N.S.M.C
Au ck land
Phone 0800 232 633
www.ausclimate.co.nz
Ausclimate will repair or replace your product at no charge if a manufacturing fault is found within the warranty period.
This warranty does not cover:
The rechargeable moisture absorber body is covered only if found to be faulty. Normal wear, saturation, or replacement of
moisture-absorbing material is not covered.
Misuse or neglect
Shipping damage
Incorrect installation
Repairs by anyone other than a qualified technician
Keep your receipt - this helps us verify your warranty quickly.
Your Consumer Rights
This warranty is in addition to your rights under consumer law.
In Australia, under the Australian Consumer Law, you’re entitled to a replacement or refund for a major failure, and
to compensation for other reasonably foreseeable loss or damage. You're also entitled to have the goods repaired or
replaced if they fail to be of acceptable quality and the failure doesn’t amount to a major failure.
In New Zealand, this warranty is provided in addition to the guarantees under the Consumer Guarantees Act (1993).
Ausclimate – Australia
CDB Group Australia Pty
PO Box 574
South Morang
Victoria, 3752
Phone 03 9365 5100
www.ausclimate.com.au
Thank you for purchasing an Ausclimate product. Every unit is backed by a 2-year warranty for domestic use. For non-
domestic use, a 3-month warranty applies.
What’s Covered
What’s Not Covered
Due to continual design improvements, the product illustrated in this User Manual may differ slightly from the actual product.
