Yardworks 060-2365-6 14-in 5A Electric Corded Grass Trimmer/Edger

Product's Documents

Below are documents related to this product, you can read online or download:
060-2365-6 photo

User Manual

This is the main product document for model 060-2365-6.

The file format is pdf, 20 pages, you can download this manual here .

background
model number 060-2365-6 | contact us: 1.866.523.5218
IMPORTANT:
Read and follow all safety rules and operating
instructions before using this product.
Instruction
Manual
Grass Trimmer
3025736
Certied to CSA Std. C22.2
No.147
Conforms to UL Std. 82
background
model number 060-2365-6 | contact us: 1.866.523.5218
2
background
model number 060-2365-6 | contact us: 1.866.523.5218 model number 060-2365-6 | contact us: 1.866.523.5218
3
Table of Contents
Technical Specications
TECHNICAL SPECIFICATIONS
Voltage 120 V~ 60 Hz
Rated Current 5 A
No Load Speed 8000/min
Cutting Diameter 14” (35.56 cm)
Line Diameter 0.065” (1.65 mm)
Line Length 2x16’ (2x4.9 m)
Machine Weight 5 lb (2.3 kg)
Protection class
/II
Technical Specications 3
General Safety Rules 4
Know Your Grass Trimmer 7
Accessories 7
Exploded View 8
Parts List 9
Assembly & Operation 10
Maintenance 15
Symbols 16
Warranty 17
background
model number 060-2365-6 | contact us: 1.866.523.5218
4
General Safety Rules
FOR ALL APPLIANCES
• Avoid Dangerous Environment - Don’t
use appliances in damp or wet locations.
• Don’t Use In Rain.
• Keep Children Away - All visitors should
be kept at a distance from work area.
• Dress Properly - Do not wear loose
clothing or jewellery. They can be
caught in moving parts. Use of rubber
gloves and substantial footwear is
recommended when working outdoors.
Wear protective hair covering to contain
long hair.
• Use Safety Glasses - Always use face or
dust mask if operation is dusty.
• Use Right Appliance - Do not use
appliance for any job except that for
which it is intended.
• Ground Fault Circuit Interrupter (GFCI)
protection should be provided on the
circuit(s) or outlet(s) to be used for the
gardening appliance. Receptacles are
available having built-in GFCI protection
and may be used for this measure of
safety.
• Warning -To reduce the risk of electric
shock, use only with an extension cord
intended for outdoor use, such as an
extension cord of cord type SW-A,
SOW-A, STW-A, STOW-A, SJW-A,
SJOW-A, SJTW-A. or SJTOW-A.
• Extension Cord - Make sure your
extension cord is in good condition.
When using an extension cord, be
sure to use one heavy enough to carry
the current your product will draw. An
undersized extension cord will cause a
drop in line voltage resulting in loss of
power and overheating. Table 1 shows
the correct size to use depending on cord
length and nameplate ampere rating.
If in doubt, use the next heavier gauge.
The smaller the gauge number, the
heavier the cord. To reduce the risk of
disconnection of appliance cord from the
extension cord during operating:
• Make a knot as shown in Figure 1; or
• ii) Use one of the plug-receptacle
retaining straps or connectors described
in this manual.
• Avoid Unintentional Starting - Don’t
carry plugged-in appliance with nger
on switch. Be sure switch is off when
plugging in.
• Don’t Abuse Cord - Never carry
appliance by cord or yank it to
disconnect from receptacle. Keep cord
from heat, oil, and sharp edges.
• Don’t Force Appliance - It will do the
job better and with less likelihood of a
risk of injury at the rate for which it was
designed.
• Don’t Overreach - Keep proper footing
and balance at all times.
• Stay Alert - Watch what you are doing.
Use common sense. Do not operate
appliance when you are tired.
!
WARNING: Read all instructions.
!
WARNING: When using electric gardening appliances, basic safety precautions
should always be followed to reduce the risk of re, electric shock, and personal
injury.
background
model number 060-2365-6 | contact us: 1.866.523.5218 model number 060-2365-6 | contact us: 1.866.523.5218
5
General Safety Rules
• Disconnect Appliance - Disconnect
the appliance from the power supply
when not in use, before servicing, when
changing accessories such as blades,
and the like.
• Store Idle Appliances Indoors - When
not in use, appliances should be stored
indoors in dry and high or locked-up
place - out of reach of children.
• Maintain Appliance With Care - Keep
cutting edge sharp and clean for
best performance and to reduce the
risk of injury. Follow instructions for
lubricating and changing accessories.
Inspect appliance cord periodically,
and if damaged, have it repaired by
an authorized service facility. Inspect
extension cords periodically and replace
if damaged. Keep handles dry, clean,
and free from oil and grease.
• Check Damaged Parts - Before further
use of the appliance, a guard or other
part that is damaged should be carefully
checked to determine that it will operate
properly and perform its intended
function. Check for alignment of moving
parts, binding of moving parts, breakage
of parts, mounting, and any other
condition that may affect its operation.
A guard or other part that is damaged
should be properly repaired or replaced
by an authorized service centre unless
indicated elsewhere in this manual.
Table 1
Minimum gauge for extension cords
Volts Total length of cord
120 V
25’
(7.6 m)
50’
(15.2 m)
100’
(30.5 m)
150’
(45.7 m)
Ampere
rating
more
than not
more
than
AWG
0-6 18 16 16 14
6-10 18 16 14 12
10-12 16 16 14 12
12-16 14 12
Not recom-
mended
Figure 1
Method of securing extension cord
CORD SET
APPLIANCE CORD
(A) TIE CORD AS
SHOWN
(B) CONNECT PLUG
AND RECEPTACLE
FOR ALL DOUBLE-INSULATED
APPLIANCES
!
WARNING: Read all safety warnings and instructions. Failure to follow
the warnings and instructions may result in electric shock, re and/or
serious injury.
background
model number 060-2365-6 | contact us: 1.866.523.5218
6
SAVE THESE INSTRUCTIONS!
• Replacement Parts
When servicing use only identical
replacement parts.
• Polarized Appliance Connections
To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other) and will
require the use of a polarized extension
cord. The appliance plug will t into a
polarized extension cord only one way.
If the plug does not t fully into the
extension cord, reverse the plug. If the
plug still does not t, obtain a correct
polarized extension cord. A polarized
extension cord will require the use of a
polarized wall outlet. This plug will t
into the polarized wall outlet only one
way. If the plug does not t fully into
the wall outlet, reverse the plug. If the
plug still does not t, contact a qualied
electrician to install the proper wall
outlet. Do not change the equipment
plug, extension cord receptacle, or
extension cord plug in any way.
ADDITIONAL SAFETY RULES FOR LAWN
TRIMMER AND EDGE TRIMMER
1. Keep guards in place and in working
order.
2. Do not use this product without the guard
being tted.
3. Keep hands and feet away from cutting
area.
4. Do not use heavier lines than
recommended in this manual.
5. Do not use line materials of other types –
for example, metal wire, rope, and the like.
SAVE THESE INSTRUCTIONS
General Safety Rules
background
model number 060-2365-6 | contact us: 1.866.523.5218 model number 060-2365-6 | contact us: 1.866.523.5218
7
Know Your Grass TrimmerAccessories
1. Auxiliary Handle
2. On/Off Switch
3. Extension Cord Retainer
4. Safety Guard
5. Cutting Head Assembly
6. Flower Guard
7.
Line Cutter
56
4
7
Safety guard 1
Flower guard 1
Auxiliary handle 1
1
2
3
background
model number 060-2365-6 | contact us: 1.866.523.5218
8
17
18
12
11
22
21
24
25
30
31
36
35
34
33
32
29
28
26
27
23
20
37
19
46
45
40
38
39
41
42
44
43
10
8
9
1
2
6
5
3
4
7
13
14
15
16
Exploded View
background
model number 060-2365-6 | contact us: 1.866.523.5218 model number 060-2365-6 | contact us: 1.866.523.5218
9
Parts List
Item
Description
QTY.
1
Power Cord
1
2
Cable Protector
1
3
Self Tapping Screw
2
4
Cord Clamp
1
5
Switch
1
6
Compression Spring
1
7
Trigger
1
8
Right Handle
1
9
B-Self Tapping Screw
5
10
Self Tapping Screw
1
11
Coiled Cable
1
12
Tube
1
13
Left Handle
1
14
Nut
1
15
Self Tapping Screw
1
16
Handle
1
17
Knob
1
18
Nut
1
19
Flower guard wire
1
20
Motor
1
21
Right Housing
1
22
B-Self Tapping Screw
9
23
Washer
1
24
Blower
1
25
Rivet
2
26
Compression Spring
1
27
Line Feeder
1
28
Winding Spool
1
29
Cutting Line
1
30
Nut
1
31
Insulation Cap
1
32
Cutting Head Cover
1
33
Guard
1
34
Cutting Blade
1
35
B-Self Tapping Screw
1
36
B-Self Tapping Screw
1
37
Left Housing
1
38
Ball Bearing 607
1
39
Rotor
1
40
Brush Holder
1
41
Ball Bearing 608
1
42
Stator
1
43
Front Bracket
1
44
Screw
2
45
Carbon Brush Assembly
2
46
Brush Holder Bush
2
background
model number 060-2365-6 | contact us: 1.866.523.5218
10
Assembly & Operation
ASSEMBLY AND OPERATION
1. FITTING THE GUARD (See Fig. A)
Attach the safety guard to the trimmer head. Align the guard so it slides into the slots located
on the trimmer head. Turn the tool over and secure the safety guard onto the trimmer head
with the screw (a) provided.
2. FITTING THE FLOWER GUARD (See Fig. B)
Attach the ower guard to the trimmer head. Align the guard so it slides into the holes located
on the trimmer head.
3. ATTACHING THE HANDLE (Fig. C)
4. ADJUSTING THE HEIGHT (Fig. D)
1
2
3
A
B
2
3
1
C
D1
D
1
2
3
background
model number 060-2365-6 | contact us: 1.866.523.5218 model number 060-2365-6 | contact us: 1.866.523.5218
11
ADJUSTING THE ANGLE (Fig. F)
5. MAINS SUPPLY CABLE STRAIN RELIEF (SEE FIG. D1 D2)
In order to reduce strain on the cable inlet, form a loop and locate the cable around the strain
relief arm.
6. Take great care when doing this as the guard has a very sharp cutting edge.
(See Fig. E)
Assembly & Operation
D2
D1
E
F
1
2
background
model number 060-2365-6 | contact us: 1.866.523.5218
12
Assembly & Operation
7. MANUALLY FEEDING THE LINE (Fig. F)
Replacing spool & replacing line
To remove the cap
Press and hold in the two latches. (See Fig. H1-H3)
Pull cap away from the spool holder. When retting the spool cap
keep all areas of the cap and spool holder clean.
Replace the cap, pressing rmly down towards the spool holder to ensure cap is fully located.
Check that the cap is correctly tted by trying to remove it without depressing the two latches.
1
2
H1
H2
H3
1
2
2
F
background
model number 060-2365-6 | contact us: 1.866.523.5218 model number 060-2365-6 | contact us: 1.866.523.5218
13
Assembly & Operation
8. TRIMMING (Fig. I)
To switch on the trimmer, If you nd that the nylon line is too short follow the instruction as
in ‘Automatic line feed system’ or “To manually feed the line”. Hold the bottom of the trimmer
head about just above the ground and at a slight angle. Allow only the tip of line to make
contact with the grass. Let the trimmer line work at its own pace. Do not force trimmer line into
work area.
Edging (Fig. J)
Change the tool from trimming to edging mode push the handle rotation locking button
downward and rotate the main handle 90
o
While edging, only allow the tip of the line to make
contact with area being worked. Do not force the line. The edging wheels help protect the unit
and keep the unit from contacting the ground. Take extra caution while edging as objects can
be thrown from the trimmer line.
9. AUTOMATIC LINE FEED SYSTEM
When initially switching on the trimmer, a small length of line is fed out.
A clattering noise will be heard when the lines hit the line cutter. DO NOT BE ALARMED, this
is normal. After about 5 seconds the line will be cut to the correct length and the noise will
reduce as the motor receives full speed.
If the noise of the line being cut can’t be heard, more line will be fed out.
To feed more line, it is rst necessary to allow the trimmer to stop completely, then restart,
allowing the motor to reach full speed.
Repeat above until you hear the lines hitting against the line cutter. (Do not repeat this
procedure more than 6 times)
I
J
background
model number 060-2365-6 | contact us: 1.866.523.5218
14
Assembly & Operation
10. MANUALLY WINDING THE LINE (SEE FIG. K, L, M, N)
Take approximately 16’ (5 m) line and insert 5/8” (15 mm) of line into one of the holes in the
upper section of the spool (Fig. M). Wind the line in the direction of the arrows on the top of the
spool (Fig. N).
Leave approximately 4” (100 mm) of line unwound and place it into the cleat. Repeat on the
lower section of spool.
Care should be taken to ensure that the line is neatly coiled on the spool (Fig. O). Failure to do
so will impair the efciency of the automatic line feed.
Then t the spool as described above in “Replacing the Trimmer Line and Spool”.
K
L
M
N
background
model number 060-2365-6 | contact us: 1.866.523.5218 model number 060-2365-6 | contact us: 1.866.523.5218
15
Maintenance
After use, disconnect the machine from the mains and check for damage. Your power tool
requires no additional lubrication or maintenance. There are no user serviceable parts in your
power tool. Mains powered trimmers should only be repaired by an authorized repairer use
only manufacturers recommended replacement parts and accessories.
Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place out of the reach of children. Keep the motor
ventilation slots clean. Keep all working controls free of dust. If you see some sparks ashing
in the ventilation slots, this is normal and will not damage your power tool.
background
model number 060-2365-6 | contact us: 1.866.523.5218
16
Symbols
Symbol Name Designation/Explanation
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watts Power
min Minutes Time
Alternating Current Type of current
Direct Current Type of current
Class II Construction Double-insulated construction
/min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Read the Operator’s
Manual
To reduce the risk of injury, user must read instruction manual.
Ear Protection Wear ear protection.
Operation Condition
Do not expose to rain.
Keep all other people, including children, pets and bystanders
outside the 15 metres hazard zone; stop the trimmer immediately
if you are approached.
Before any work on the machine itself, pull the power plug from
the outlet.
Trimming
Edging
Lock
Unlock
Wear protective gloves.
SAVE THESE INSTRUCTIONS!
background
model number 060-2365-6 | contact us: 1.866.523.5218 model number 060-2365-6 | contact us: 1.866.523.5218
17
Warranty
TWO-YEAR LIMITED WARRANTY
For Two (2) Years from the date of purchase
within Canada, YARDWORKS CANADA
will, at its option, repair or replace for the
original purchaser, free of charge, any part
or parts found to be defective in material or
workmanship.
THIS WARRANTY DOES NOT COVER
1. Any part that has become inoperative
due to misuse, commercial use,
abuse, neglect, accident, improper
maintenance, or alteration;
2. The unit, if it has not been operated and/
or maintained in accordance with the
owner’s manual;
3. Normal wear, except as noted below;
4. Routine maintenance items such as
lubricants, blade sharpening; or
5. Normal deterioration of the exterior nish
due to use or exposure.
FULL ONE HUNDRED TWENTY
(120) DAYS WARRANTY ON NORMAL
WEAR PARTS
Normal wear parts are dened as blade
adaptors, blades, grass bags and tires.
These parts are warranted to the original
purchaser to be free from defects in material
and workmanship for a period of
one hundred twenty (120) days from the
date of retail purchase.
HOW TO OBTAIN SERVICE
Warranty service is available by calling
the toll-free helpline, at 1.866.523.5218.
The factory will not accept the return of a
complete unit unless prior written permission
has been extended by YARDWORKS
CANADA.
TRANSPORTATION CHARGES
Transportation charges for the movement
of any power equipment unit or attachment
are the responsibility of the purchaser.
The purchaser must pay transportation
charges for any part submitted for
replacement under this warranty unless
such return is requested in writing by
YARDWORKS CANADA.
OTHER WARRANTIES
All other warranties, express or implied,
including any implied warranty of
merchantability is limited in its duration to
that set forth in this express limited warranty.
The provisions as set forth in this warranty
provide the sole and exclusive remedy of
YARDWORKS CANADA obligations arising
from the sale of its products.
Made in China. Imported by Yardworks Canada
Toronto, Canada M4S 2B8
background
background
background

Specifications

Indexed Terms: Grass Trimmer, Corded

Yardworks 060-2365-6 Questions and Answers

Questions and Answers

Related Products