English
DISHWASHER
INSTRUCTION MANUAL
Model:
Read these instructions carefully before using your
DISHWASHER, and keep it carefully.
DW-14F2(BS)-MY
SAFETY INSTRUCIONS
All instructions described should be carefully read and followed.
These instructions are precautions to prevent the risks of serious injury or death of the user, and
any damages to property.
MARKINGS
WARNING
CAUTION
WARNING indicates high possibility of serious injury (*1) or
death of the user.
CAUTION indicates high possibility of serious injury (*2) or property
loss (*3).
(*1) Serious injury - injury which requires hospitalization, lengthy treatment, or blindness, hot and
cold skin burn, electric shock, broken bones or poisoning.
(*2) Injury - injury, skin burn or electric shock which does not require hospitalization or lengthy
treatment.
(*3) Property loss - extended loss of houses, furniture, domestic animals or pets.
SYMBOLS
PROHIBITED!
IMPORTANT
CAUTION
PROHIBITED! Indicates prohibited actions.
Detailed instructions would be indicated on the inside of the circle
or around the symbol in figures or in writing.
IMPORTANT! Indicates mandatory actions.
Detailed instructions would be indicated on the inside of the circle
or around the symbol in figures or in writing.
CAUTION! Recommends to take precautions.
Detailed instructions would be indicated on the inside of the triangle
or around the symbol in figures or in writing.
Do not allow below people to operate the dishwasher
The dishwasher cannot be used by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety.
Take care of children and ensure they will not play with the dishwasher.
The packing material may be dangerous to children.
Do not dismantle or modify the dishwasher.
This may cause fire, electric shock or fault, and cause injuries. If repair is required,
please contact with the vendor of the dishwasher.
Use suitable power source according to the power indicated on the dishwasher
nameplate.
It will cause fire or electric shock. The use of improper power source
may cause the socket overheated and cause fire.
Away
from
children
No
modification
Electric
shock
02
Instruction
Prohibit
Instruction
Prohibit
English
Disconnect
power plug
No touch
by wet
hand
Electric
shock
No
dis-assembly
and repair
without
permission
No water
spraying
Away from
flammable
materials
Wipe
off dust
Before cleaning or maintaining the dishwasher, disconnect the power plug first.
Do not connect or disconnect the power plug by wet hand.
This may cause electric shock or fault and cause injuries.
Do not use damaged power lines, power plug or loose power socket.
This may cause electric shock or fault, and cause injuries or fires.
Do not damage power line.
Do not damage, cut, process power line or bend, pull, twist or bind power line.
Besides, do not yank the metal part of the power line, or put weights on the line
or clamp the power line.
The power line may be damaged and cause fire or electric shock. If the
power line is damaged, the damaged line must be replaced by the manufacturer
or its service agent or personnel having similar qualificarion, so as to prevent
dangers.
Do not spray water directly onto the parts of the main body of the dishwasher.
This may cause accidents of electric shock or short circuit.
Do not put flammable materials into the dishwasher.
Do not put flammable materials of kerosene, gasoline, volatile oil, diluent, ethyl
alcohol etc. as well as dishes having such matters into the dishwasher.
It will may cause explosion or fire.
Wipe off dust or dirt accumulated on the plug of power line.
The accumulated dust or dirt may cause fire.
Do not touch the inside of the cabinet, steam jets for during operation or
30 minutes after operation.
There is a fear of burning.
Take out the dishes, clean filters, handle it more than 30 minutes after operation.
There is a fear of burning.
Do not use extension cord.
It may cause fire due to heat.
It there is abnormality such as the spray arm is not moving, smoke or strange smell,
immediately unplug the power plug and stop using the dishwasher.
Please ask the agent you purchased for inspection/repair. There is a danger of
electric shock, fire by electric leakage or short-circuiting.
03
Insert plug
Insert the power plug securely to the base and let the cord go downward.
If the cord goes upward or if the plug is incompletely inserted, it may cause fire due
to electric leakage or heat generation.
Prohibit
Instruction
Prohibit
Away from
flammable
matrtials
Careful
installation
Correct
grounding
No dis-assembly
and repair
without
permission
Do not operate by putting easily combustible items such as towels and cloth inside
the cabinet of the dishwasher.
There is a fear of fire.
Separate from the heat source such as gas stove 15 cm or more.
There are fears of fires and deformations.
Do not place anything on the main unit.
Do not place heavy objects or hot objects on top of the main unit, such as containers
of water or hot water, heat appliances, glasses, electric products, cutlery etc.
Falling by opening and closing the door may cause injury. Also, spilled water may
deteriorate insulation and cause electric leakage and fire.
Do not place the dishwasher near fire.
Do not put the burning candle or cigarette on the dishwasher. It may cause fire.
Make sure the dishwasher can be set at a smooth drainage location.
The use of dishwasher having poor drainage may cause water to flow back to the
dishwasher and cause electric shock or fire.
The dishwasher must be grounded.
The current resistance are minimum after grounding, and this can reduce the danger
of electric shock when the dishwasher become fault state. The electric wires of this
dishwasher have grounding wire and grounding plug.
Fault connection of the grounding wire will cause electric shock. If E3 failure occurs,
please unplugging the power plug from the outlet, and needs to be repaired by
professional electricians or service men.
Do not change the plug without permission.
When the plug does not match the socket, proper power socket shall be installed by
professional electricians.
04
No pulling
by force
No use
No
washing
Application
environ-
ment
No
climbing
Pull off
power plug
Care about
the door
Care for
safety
Care for
cleaning
Attention
When disconnecting the plug from the socket, do not pull the power line by force.
Pull out by grasping the power plug. It may cause electric shock or fault and cause
injuries.
Do not use soap, washing powder or other hand sanitizer. Only dishwashing powder
suitable for automatic dishwasher. It may cause machine fault.
Do not wash plastic utensils.
For plastic utensils, only those marked with safety for the dishwasher or other
similar situations, can be washed by the dishwasher. For the plastic utensils without
marks, check details with the utensil manufacturer.
Only for indoor use.
Such home appliance is for household use, e.g.:
- Applications in staff kitchen of shop, office and other working environments;
- Farmhouse;
- Use for customers in hotel, car hotel and other residence environments;
- Environments of inns
Do not sit or stand on the dish rack or door of the dishwasher.
It may cause dangers of injuries due to deformation or damage.
When the dishwasher is not used for long time, pull off the power plug from
the power socket and close the dishwasher door.
Electric shock or short circuit may be caused due to the degradation of insulating
material.
The door shall keep close, to prevent stumble.
It is very dangerous to open the door during washing, and hot water may cause
scald.
When install the items (dishes, utensils etc) into the dishwasher:
1. Be careful to put sharp utensil to prevent it from scratch the door sealing strip.
2. Warning: the cutters and other sharp tools must be put in the basket, and the
sharp end is put downwards or horizontally.
Moisten the soft cloth by mild cleaning solution, then wipe the machine, and
wipe it dry by dry cloth.
After washing, check if the dishwashing powder is empties.
Firstly, confirm that there is no error or abnormality notification on the panel before
using the dishwasher.
When installing the dishwasher, use new water hose. Do not use the current
water hose.
Maximum inlet water pressure is 1
Minimum water inlet pressure is 0.04
05
Prohibit
Prohibit
Attention
to burn
Prohibit
Prohibit
Prohibit
Instruction
Instruction
Instruction
Loading
capacity
Attention
to pinching
of fingers
Quantity of tableware advised: 162 pcs (Cup x14 + Saucer x14 + Glass x14 +
Small serving bowl x1 + Medium serving bowl x1 + Large serving bowl x1 +
Dessert dishes x14 + Dinner plate x14 + Soup plate x14 + Oval platter x1 +
Soup spoon x14 + Fork x14 + Knife x14 + Teaspoon x14 + Dessert spoon x14 +
Serving spoon x 2 + Serving fork x1 + Gravy ladle x1)
Do not strongly push open door and main body, nor put the downward
pressure to the door. Falling may cause injuries.
Be careful not to pinch fingers when opening and closing the door.
There is a risk of getting hurt while pinching fingers.
Do not get close to the exhaust port.
Steam or hot air may cause the burns.
While using or after using the dishwasher, pay attention to hot water
drained out.
High temperature hot water may come out, there is a risk of burns.
Prohibit to hit or tap the dishwasher.
Electric shock, electric leakage short circuit may cause fire.
Set the filters correctly.
Residues clogs, causing breakdown.
Do not put light and small dishes such as plastic containers.
If it is dropped by water pressure of the water spray, it may cause malfunction
due to clogging the dishwasher.
Do not use for purposes other than dishwasher dryer.
It may cause a malfunction.
Make the main unit a solid level surface.
Normal operation may not be possible. It may cause water leakage.
Fix the connection of drainage pipe certainly.
It may cause water leakage.
06
Warning
Warning
Handle the package of the dishwasher with extreme care.
All packages are recyclables.
Plastic parts are marked with abbreviation of international standard;
Treatments
PE Polyethylene, e.g., tableted package material
Polystyrene, e.g., packing material
Polymethyl, e.g., plastic clip
Polymer, e.g., control panel
Polypropylene, e.g., inner wall
PS
POM
ABS
PP
English
The packing material may be dangerous to children!
The disposal of package and machine shall be submitted to the
recycle center.
When the machine is not in service, please switch off the power and
close the machine door.
The cardboard package is made by recycled paper and shall be collected for recycling.
If the generated rubbish cannot be treated properly, they will be harmful to the environment
and human health, and they shall be properly disposed to prevent potential threat.
For more details of product recycle, please contact relevant departments of local government or
the service center for domestic refuse management.
Treatment: Please do not treat the product as unclassified municipal refuses.
Different refuses have to be subject to special treatment separately.
Such warning sign is used to prevent dangers to you and others.
Please follow it strictly.
After reading, please store it properly for use just in case.
07
Start up
Cleaning and care
Filter cleaning
Spray arms cleaning
Care and maintenance
Recognize the dishwasher
Dishwasher features
Control panel
Use the dishwasher
Water softener
Adding salt to the softener
Adding rinse aid to the dispenser
10
11
13
01
02
03
04
Rinse aid and detergent
16
17
18
26
27
28
19
14
Please carefully read the instruction manual before using the dishwasher,
and this is helpful for the use and maintenance of the product.
Contents
Program Setting
Washing program
08
Changing the program mid-cycle
Put additional dishes in
End of washing program
Basket used tips
Install dishwasher bowl basket
20
21
Adding rinse aid to the dispenser
24
14
15
15
UV light
25
English
09
Troubleshooting
Before connecting customer service center
Error code
Installation
Product dimension
Power connection
05
29
30
32
34
3
Specification
06
Water connection
Connection of drain hoses
30
31
5
Recognize the dishwasher
Dishwasher features
Important:
Before using the dishwasher for the first time, read following instructions to ensure the
best results.
Salt container
Filter
Lower spray arm
Dispenser
10
Cutlery basket Upper basket
Upper spray arm
Cutlery rack
Cup rack
Lower basket
Control panel
1
Power
Power on/off
2
Program
Select the appropriate washing program and the corresponding
indicator will light up.
English
11
RAPID For slight dirty dishes, the required cleaning time
is relatively short.
GLASS For slight dirty dishes and glasses.
AUTO DAILY
Light to heavily soiled daily used items, automatic
detection of the amount of soils.
90 MIN For normally soiled loads that need quick wash.
ECO This is standard program. For general dirty dishes
and utensils (such as pots, plates, glasses, pans).
Alt3 Press the button to select either upper basket or lower basket loaded,
and the corresponding indicator will light up.
HYGIENE
Use to your dishes and glassware.
Maintains the water temperature at 70˚C.
1 2 3 4 5736 42
SOAK To rinse dishes that you plan to wash later that day.
INTENSIVE
For dishes with oil stains and heavy dirty cooking
utensils and dishes.
UPPER
LOWER
When you select upper, only the upper rack nozzle
is activate. The lower nozzle will not operate.
When you select lower, only the lower rack nozzle
is activated. The upper nozzle will not operate.
remove bacteria
4
Function
Select a function and the corresponding indicator will light up.
EXTRA DRYING Use this option when you want to dry your
dishes more completely. It can only be used
with Intensive, Hygiene, Eco, Glass, 90min
POWER WASH To wash very dirty, hard to clean dishes. It can
only be used with Intensive, Hygiene, Eco,
Glass, 90min.
12
Display
7
If the “ ” indicator is lit, it means the dishwasher is low on
dishwasher rinse aid and requires a refill.
If the “ ” indicator is lit, it means the dishwasher is low on
dishwasher salt and requires a refill.
To show the remaining time and delay time, error codes etc.
EXPRESS For better drying result.
It can only be used with Intensive, Hygiene, Eco,
Glass, 90min.
SANITIZATION Use to sanitize your dishes and glassware.
When the icon lights up, the UV light is
working. It can be switched on and off by
pressing the icon
5
Delay -/+
Press the “+”button to add the delay time or press the “-”button to
decrease the delay time, maximum 24 hours delay can be defined.
6
Warning
Indicator
Following table shows best cleaning procedures and amount of dishwashing
powder required according to the dirty level of the dishes, as well as the
Washing program
Dishwashing
powder (g)
Highest Water
Temperature
Time
(min)
Power
(Kwh)
Water
(L)
Program
The above program data is for reference only. Test conditions are as follows:
Attention
Power consumption at shutdown state and standby state similarly are 0.49w.
Washing capacity: 162 pcs (Cup x14 + Saucer x14 + Glass x14 + Small serving bowl x1 +
Medium serving bowl x1 + Large serving bowl x1 + Dessert dishes x14 + Dinner plate x14 +
Soup plate x14 + Oval platter x1 + Soup spoon x14 + Fork x14 + Knife x14 + Teaspoon x14 +
Dessert spoon x14 + Serving spoon x 2 + Serving fork x1 + Gravy ladle x1)
Program Setting
English
13
60℃
AUTO DAILY
150-185
5/30
1 or 2 pieces
0.9-1.1
11~15
65℃
210
5/30
1 or 2 pieces
0.93 10
GLASS
60℃
130
5/30
1 piece
0.9 13
90MIN
65℃
90
35
1 piece
1.35 12.5
RAPID
55℃
30 0.75 1125
HYGIENE
70℃
175 1.5
13.5
35
1 piece
INTENSIVE
SOAK
70℃
175 1.6
17.5
/
15 0.02 4/
5/30
1 or 2 pieces
Start up
Changing the program mid-cycle
1. The plug shall be firstly plugged into the socket. Power supply shall be of
2. Make sure that the water supply is turned on to full pressure.
3. Open the door, press "ON/OFF" button turn on the dishwasher.
4. Press the button of desired program, the corresponding indicator will light up.
5. Then, close the door, the dishwasher will start its cycle.
A wash cycle can only be changed if it has been running for a short time otherwise, the
detergent may have already been released and the dishwasher may have already drained
the wash water. If this is the case, the dishwasher needs to be reset and the detergent
dispenser must be refilled. To reset the dishwasher, follow the instructions below:
1. Open the door a little to stop the dishwasher, after the spray arm stop working, you can
open the door completely.
2. Press the Program button for more than 3 seconds, the dishwasher will enter
standby mode.
3. Press the Program button to select the desired program.
4. Then, close the door, the dishwasher will start its cycle.
14
3 seconds
220-240V AC 50Hz type, with socket of 10 A 220-240V AC.
Put dishes in additional
Additional dishes can be placed in at any time before dishwasher program start. If you
want to reload dishes in the process of washing, please follow instructions below:
1. Open the door a little to stop the dishwasher, after the spray arm stop working, you can
open the door completely.
2. Put the additional dishes in.
4. Close the door, the dishwasher will start after 10 seconds.
End of washing program
After the program finishes, the machine show "End" after the buzzer beeps for 8 seconds.
Warning
Turn off the machine
Press ON/OFF button to turn off the dishwasher.
Hot dishes are more likely to be damaged. The dishes shall be cool for about 15 minutes
and then taken out from the dishwasher.
Open the door carefully
It is extremely emely dangerous to open the door in t he process of washing as this may cause
severe burn by hot water.
Clear the dishwasher
It is normal that the dishwasher still remains wet inside.
English
15
The dishwasher is designed to allow for adjustment in the amount of salt consumed
based on the hardness of the water used. This is intended to optimise and customise the
level of salt consumption.
Please follow the steps below for adjustment in salt consumption.
0 - 5
6 - 11
12 - 17
18 - 22
23 - 34
35 - 55
German
dH
German
dH
Salt consumption
(gram/cycle)
Salt consumption
(gram/cycle)
0 - 9
10 - 20
21 - 30
31 - 40
41 - 60
61 - 98
0 - 6
7 - 14
15 - 21
22 - 28
29 - 42
43 - 69
0 - 0.94
1.0 - 2.0
2.1 - 3.0
3.1 - 4.0
4.1 - 6.0
6.1 - 9.8
0
9
12
20
30
60
French
fH
French
fH
Mmol/lMmol/l
Water softener levelWater softener level
British
Clarke
British
Clarke
WATER HARDNESS
H1
H2
H3
H4
H5
H6
dH=1.25 Clarke=1.78 fH=0.178mmol/l
°
°
°
1
The water softener must be set manually, using the water hardness dial.
The water softener is designed to remove minerals and salts from the water, which would
have a detrimental or adverse effect on the operation of the appliance.
The more minerals there are, the harder your water is.
The softener should be adjusted according to the hardness of the water in your area. Your
local Water Authority can advise you on the hardness of the water in your area.
1. Open the door and switch on the appliance
2. Press the Program button for more than 5 seconds when the salt indicator
flashes means entering the water softener settings.
set model within 60 seconds after the appliance was switched on.
3. Press the Program button to select the proper set according to your local
environment, the sets will change in the following sequence:
H1->H2->H3->H4->H5->H6.
4. Without any operation in five seconds, the machine will exit from set mode, the
machine is into standby status.
.
,
Use the dishwasher
Water softener
Adjusting salt consumption
The manufactory setting: H3
Contact your local water board for information on the hardness of your water supply.
16
1. Remove the lower basket and unscrew the reservoir cap.
2. Place the end of the funnel (supplied) into the hole and pour in about 1.5kg of
dishwasher salt.
3. Fill the salt container to its maximum limit with water, It is normal for a small amount of
water to come out of the salt container.
4. After filling the container, screw back the cap tightly.
5. The salt warning light will stop being after the salt container has been filled with salt.
6. Immediately after filling the salt into the salt container, a washing program should be
started (We suggest to use a short program). Otherwise the filter system, pump or other
important parts of the machine may be damaged by salty water. This is out of warranty.
Please follow the steps below for adding dishwasher salt:
Warning
Only use salt specifically designed for dishwashers use!
Every other type of salt not specifically designed for dishwasher use, especially
table salt, will damage the water softener. In case of damages caused by the use of
unsuitable salt the manufacturer does not give any warranty nor is liable for any
damages caused.
Only fill with salt before running a cycle.
This will prevent any grains of salt or salty water, which may have been spilled,
remaining on the bottom of the machine for any period of time, which may cause
corrosion.
Attention
The salt container must only be refilled when the salt warning light ( ) in the
control panel comes on. Depending on how well the salt dissolves, the salt warning
light may still be on even though the salt container is filled.
If there is no salt warning light in the control panel (for some Models), you can
estimate when to fill the salt into the softener by the cycles that the dishwasher has
run.
If salt has spilled, run a soak or quick program to remove it.
Adding salt to the softener
English
17
The rinse aid is released during the final rinse to prevent water from forming droplets on
your dishes, which can leave spots and streaks. It also improves drying by allowing water
to roll off the dishes. Your dishwasher is designed to use liquid rinse aids.
Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any
other substances (e.g. Dishwasher cleaning agent, liquid detergent). This would
damage the appliance.
Function of the rinse aid and detergent
Function of detergent
The chemical ingredients that compose the detergent are necessary to remove, crush and
dispense all dirt out of the dishwasher. Most of the commercial quality detergents are
suitable for this purpose.
When to refill the rinse aid
The regularity of the dispenser needing to be refilled depends on how often dishes are
washed and the rinse aid setting used.
The Low Rinse Aid indicator ( ) will appear in the display when more rinse aid is
needed.
Do not overfill the rinse aid dispenser.
Warning
Warning
Proper Use of Detergent
Use only detergent specifically made for dishwashers use. Keep your detergent
fresh and dry.
Don't put powdered detergent into the dispenser until you are ready to wash
dishes.
Dishwasher detergent is corrosive! Keep dishwasher detergent out
of the reach of children.
18
To achieve a better drying performance with limited rinse aid, the dishwasher is
designed to adjust the consumption by user. Follow the below steps.
1. Open the door and switch on the appliance.
2. Within 60 seconds after step 1, press the Program button more than 5 seconds,
and then press the Delay “+” button to enter the set model, the rinse aid indication
blinks as 1 Hz frequency.
3. Press the Program button to select the proper set according to your using habits ,
the sets will change in the following sequence: D1->D2->D3->D4->D5->D1.
The higher the number, the more rinse aid the dishwasher uses.
4. Without operation in 5 seconds or press the Power button to exit the set model,
the set success.
3
Close the cap after all.
2
Pour the rinse aid into the dispenser,
being careful not to overfill.
1
Remove the rinse reservoir cap by
lifting up the handle .
Adjusting the rinse aid reservoir
Adding rinse aid to the dispenser
English
19
2
1
Please choose an open way according
to the actual situation.
1. Open the cap by sliding the release
catch.
2. Open the cap by pressing down the
release catch.
Add detergent into the larger cavity
(A) for the main wash cycle .
For better cleaning result, especially if
you have very dirt items, pour a small
amount of detergent onto the door.
The additional detergent will activate
during the pre-wash phase.
3
Close the flap by sliding it to the
front and then pressing it down.
Sliding it to the right
Press down
1
2
B
Adding detergent to the dispenser
AA
20
Dishes and knives should not be placed in other utensils, and they can’t overlaid each other.
Do not place glass close to each other to avoid damage.
For long knives, placing upright is very dangerous.
Attention
Precautions before and after the bowl basket is placed
Install dishwasher bowl basket
Suggestion
Use the dishwashing machine rationally
Purchase dishes suitable for dishwasher.
Use a suitable mild dishwashing powder. If necessary, consult the manufacturer for more
information.
For special appliances, try to select a washing program that with a lower temperature.
Do not take out the glass dishes immediately after the program ends to prevent damage.
Limited use:Not for:
Wooden, ivory, porcelain or pearl shank tool
Non heat-resistant plastic products
Cohesive knives or dishes
Tin or copper vessels
Crystal glass
Rusty steel products
Wooden utensils
Synthetic fiber products
Stale non heat-resistant cutters with glue
adhesive part
After several cleanings, some glassware
will become dull
Color of smooth dishes may fade out if often
washed
Silver or aluminum products tend to change
color during cleaning
(For the best use of dishwasher, follow the instructions below. For different models, the
characteristics and appearance of the basket will be different) Clear larger food residues.
Soften the residue of burnt food left on the pan. It is not necessary to rinse dishes with water first.
Place the dishes in the dishwasher as follows:
Cups, glasses, pots and so on are placed face down.
For curved or concave and convex vessels, place them diagonally so that the water flows out.
All utensils should be placed safely and must not be overturned.
All utensils should be placed that the arms can rotate freely during washing.
For small objects, it is easy to fall out from the basket, which should not be placed in
the dishwasher.
The open of hollow tablewares (such as cups, glasses, pots, etc.) should face downward so
that water does not easily remain in the container or grooves.
Long or sharp knives (eg. meat cleavers) should be placed horizontally in the basket.
Do not use the dishwasher overloaded so that you can get better cleaning performance.
English
21
1
2
3
4
5
6
Cups
Small serving bowl
Medium serving bowl
Saucers
Glasses
Large serving bowl
Item
Number
7
8
9
10
11
Dessert dishes
Dinner plates
Soup plates
Oval platter
Cutlery basket
Item
Number
Loading the upper basket
Loading the lower basket
Use the upper rack for small or delicate items such as small plates,cups, saucers, glasses,
and dishwasher-safe plastic items.
Place items so that the open end faces down for cleaning and drying.
Do not stack items on top of each other.
The lower rack is recommended for dinner plates, soup bowls, dishes, pots, pans, lids,
and grill trays. Plates should be positioned vertically and facing the center of the rack.
Make sure that large items do not interfere with the rotation of the spray arms, and do
not prevent the detergent dispenser from opening.
22
77
77
99
88
88
1010
77
77
1111
22
44
55
33
33
33
33
11
11
66
11
Loading the cutlery rack
1
2
3
4
Soup spoons
Forks
Knives
Teaspoons
Item
Number
5
6
7
8
Dessert spoons
Serving spoons
Serving forks
Gravy ladles
Item
Number
The cutlery rack is best suited for washing flatware and most cooking or serving utensils.
The separators on the cutlery racks help keep flatware separated to avoid damage and
improve cleaning.
English
23
44
77
11 11 11 11
11
11
11 11 11
11 11 11 11 11
22 22 22 22
33 33 33 33
44 44 44
44 44 44 44
4444444444
44
55 55
55 55
55 55 55 55 55 55
55
55 55 55
88
6
6
33
22
Adjusting the upper basket
The height of the upper basket can be easily adjusted to accommodate taller dishes in
either the upper or lower basket. We recommend adjust the height of the upper basket
before loading dishes.
To adjust the height of the upper rack, follow these steps:
1
To raise the
the upper basket at the center of
each side until the basket locks into
place in the upper position. It is not
necessary to lift the adjuster handle.
upper basket just lift ,
2
To lower the lift the
adjust handles on each side to
release the basket and lower it to
the lower position.
upper basket,
Basket used tips
24
Sliding cutlery rack
The cutlery rack can slide to the right or left at will.
raise upwards fold backwards
Folding back the rack shelves
The spikes of the lower basket are used for holding plates and a platter.
They can be lowered to make more room for large items.
English
25
Folding back the cup shelves
To make room for taller items in the upper basket, raise the cup rack upwards.
You can then lean the tall glasses against it. You can also remove it when it is not
required for use.
The UV light with antibacterial effect is
installed in the sump. When the door is
opened, the blue indicator will light up
and the UV light closed. When the door
is closed, the blue indicator is off , and
the UV light will light up at the certain
time.
UV light
Cleaning and care
The filtering system in the base of the wash cabinet retains coarse debris from the washing
cycle. The collected coarse debris may cause the filters to clog. Check the condition of the
filters regularly and clean them if necessary under running water.
Follow the steps below to clean the filters in the wash cabinet.
Filter cleaning
1 2
Hold the coarse filter and rotate it
anticlockwise to unlock the filter.
Lift the filter upwards and out of the
dishwasher.
The fine filter can be pulled off the
bottom of the filter assembly.
The coarse filter can be detached from
the main filter by gently squeezing the
tabs at the top and pulling it away.
Main filter Main filter
Coarse filterCoarse filter
Fine filter
OpenOpen
Warning
Do not over tighten the filters. Put the filters back in sequence securely, otherwise
coarse debris could get into the system and cause a blockage.
Never use the dishwasher without filters in place. Improper replacement of the
filter may reduce the performance level of the appliance and damage dishes and
utensils.
3 4
Larger food remnants can be cleaned by
rinsing the filter under running water.
For a more thorough clean, use a soft
cleaning brush.
Reassemble the filters in the reverse
order of the disassembly, replace the
filter insert, and rotate clockwise to
the close arrow.
26
Wash the arms in soapy and warm
water and use a soft brush to clean
the jets. Replace them after rinsing
them thoroughly.
It is necessary to clean the spray arms regularly for hard water chemicals will clog the
spray arm jets and bearings.
To clean the spray arms, follow the instructions below:
2
3
To remove the lower spray arm, pull
out the spray arm upward.
1
To remove the upper spray arm,
hold the nut in the center still and
rotate the spray arm counterclockwise
to remove it.
Spray arms cleaning
English
27
Care and maintenance
The door and the door seal
Clean the door seals regularly with a soft damp cloth to remove food deposits.
When the dishwasher is being loaded, food and drink residues may drip onto the sides of
the dishwasher door. These surfaces are outside the wash cabinet and are not accessed by
water from the spray arms. Any deposits should be wiped off before the door is closed.
The control panel
Control panel can be wiped with a slightly wet cloth. After cleaning, make sure it is
completely dry.
Do not use Sharp tools, Scratch sponge, or Rough detergent anywhere in the machine.
Do not use spray detergent to clean the door, as it may damage the door lock and other
electrical components.
Do not use abrasives or rough paper towels, as it may leave scratches or spots on stainless
steel surface.
Warning
28
The UV light
UV light does not require extra cleaning. If it breaks accidentally in the process of use, please
cut off the power supply to suspend the use and ask someone to clean and replace it.
Height (H)
Width (W)
Depth (D1)
Depth (D2)
845mm
598mm
600mm (with the door closed)
1175mm (with the door opened 90°)
WW
D
1
D
1
H
H
D2D2
Installation
Product dimension
English
29
Warning
Electric Shock
The machine shall be installed after the power is off. If not, electric shock
or death can be caused.
Please make sure the machine is properly grounded before use.
Power connection
Warning
Electric Shock
Do not use an extension cord or power adapter on this machine.
In case, do not cut off or remove the grounding connection of power cord.
Power requirements
Please check the label of rated value of power supply system for knowing rated voltage and
connect the machine to appropriate power supply. 10A fuse is required and time-delay
fuse or circuit breaker is recommended. Only separate circuit is suitable for this machine.
Machine connection
Make sure that supplied voltage and frequency correspond to those on rating plate. Plug
can only be connected to a properly grounded socket. If the socket that the machine must
be connected to is not suitable for the plug, replace the socket, and do not use a power
adapter that may cause overheating and burning.
30
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that
it is fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time, let the
water run to make sure that the water is clear. This precaution is needed to avoid the risk of
the water inlet to be blocked and damage the appliance.
Water connection
Please securely fix the drain hose in either position A or position B
Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or let it run into
the sink, making sure to avoid bending or crimping it. The height of drain pipe must be less
than 1000mm. The free end of the hose must not be immersed in water to avoid the back
flow of it.
B
A
MAX 1000mm
Counter
Drain hose
Back of dishwasher
Water Inlet
Drain Pipe
Mains Cable
Connection of drain hoses
English
31
Extension hose
Water outlet
How to drain excess water from hoses
Syphon connection
If the sink is 1000 higher from the floor, the excess water in hoses cannot be drained
directly into the sink. It will be necessary to drain excess water from hoses into a bowl or
suitable container that is held outside and lower than the sink.
Connect the water drain hose. The drain hose must be correctly fitted to avoid water
leaks. Ensure that the water drain hose is not kinked or squashed.
The waste connection must be at a height less than 100 cm (maximum) from the bottom
of the dish. The water drain hose should be fixed .
If you need a drain hose extension, make sure to use a similar drain hose.
It must be no longer than 4 meters; otherwise the cleaning effect of the dishwasher
could be reduced.
32
Troubleshooting
Please check the chart below before connecting customer service center
Problem
Possible cause Solutions
Before connecting customer service center
The machine is
not working
Fuse burn-out or circuit trip.
Replace fuse or reset circuit breaker
Remove any other appliances that share
same circuit with the dishwasher.
Power is not connected.
Make sure that dishwasher is on and the
is properly plugged into the socket.
drainage
Drainage pipe has a knot
or is blocked.
Check the drainage pipe.
Foam remains
in liner
Improper dishwashing
powder is used.
In order to avoid foaming, only dishwashing
powder specially designed for dishwasher
can be used. In such case, open the door
and allow the foam to evaporate.
In case of too much foam, start any
washing program for cleaning.
Colors on liner
Use dishwashing powder
with coloring agent.
Make sure that dishwashing powder used is
free of coloring agent.
Rust on dishes
Dishes with rust are easily
to be corroded.
Avoid washing dishes that are easily to be
corroded in dishwasher.
Crush in
dishwasher
Dishes in the rack prevents
spray arm from rotating.
Suspend the program and reposition the
dishes that prevent spray arm from rotating.
liner
Hard water minerals.
Use wet sponge with dishwashing powder and
wear rubber gloves for interior cleaning.
Do not use any detergent other than
dishwashing powder as it may generate foam
or bubble.
Filter is blocked.
Sink drian is blocked.
Check the sink drain to ensure good drainage.
If the kitchen sink drain is not working properly,
you shall ask a pipe technician for help rather than
Door is open.
Close the door.
English
33
Problem Possible cause Solutions
Noise from
dishwasher
Suspend the program and reposition the
dishes.
Dishes are loose.
Glassware is not
glossy
If soft water is used, use less powder and
select a shorter washing program to clean
the glassware.
Add too much dishwashing
powder under soft water
conditions.
Black or grey
imprints on dishes
Use mild detergent to eliminate these
imprints.
Friction between aluminum
utensil and dishes.
Dishes are not
completely dry
Placement is improper.
Do not take dishes out immediately after
the program ends. Slightly open the door
let the vapor out and wait until dishes are
cool.
Dishes are taken out too
early.
When shorter washing procedures are
used, washing temperature is lower and
program shall be selected.
Program is wrong.
These dishes have poor drainage ability,
which are not suitable to be washed in
dishwasher.
Dishwashing
powder remains in
adding position
Place the dishes correctly.
Placement of dishes
hinders the addition of
dishwashing powder.
White point on
dishes or
glassware
Add dishwashing powder.
Hard water produces more
scale.
Dishes remain
dirty after
washing
Please see “Install dishwasher bowl basket”
information for details (Page 22).
Dishes are not placed
correctly.
Select a more powerful program.
The program is not
powerful enough.
Use more dishwashing powder or replace
new detergent.
Dishwashing powder is
not enough.
Reposition the dishes so that spray arm
can rotate freely.
spray arm.
the rotation of spray arm.
Filter assembly is dirty or
not properly installed on the
base, which may impede
the rotation of spray arm.
Beats in water
pipe
In case of any doubts, please contact
This may be caused by site
installation or cross section
The dishes have poor
drainage ability.
Please see “Install dishwasher bowl basket”
information for details (Page 22).
34
When failure occurs, error code will appear to remind you:
Error code
Code name
Long water
intake time
Abnormal heating
Abnormal
communication
Heating pipe or thermistor is at abnormal
state, which needs to be unplugged the
power plug from the outlet , and needs to
be repaired by qualified serviceman.
Overflow or water
tank problem
The machine occur overflow or something
wrong with the floater in the water tank,
needs to be repaired by qualified serviceman.
E1
E3
E4
Ed
Error code Possible cause
Flow-meters, drain valves, or pump failures
shall be repaired by qualified serviceman.
Need to be repaired by qualified serviceman.
English
35
Specification
Model
Dimension (mm)
Rated voltage
Rated frequency
Rated power
Water consumption
Power consumption
Control mode
Washing capacity
Total weight
Net weight
DW-14F2(BS)-MY
598 (W) x 845 (H) x 600 (D)
z
10 L
0.93 kWh
Electronic type
IPX1
51 Kg
45.5 Kg
162 pcs (Cup x14 + Saucer x14 + Glass x14 + Small serving bowl x1
+ Medium serving bowl x1 + Large serving bowl x1
+ Dessert dishes x14 + Dinner plate x14 + Soup plate x14
+ Oval platter x1 + Soup spoon x14 + Fork x14 + Knife x14
+ Teaspoon x14 + Dessert spoon x14 + Serving spoon x 2
+ Serving fork x1 + Gravy ladle x1)
50 H
220-240V
z
1760-2100 W
