BLE (Bluetooth Low Energy) Product Instruction Manual
MODEL: DOT1-DB01-700
I. Product Overview
This product is an ultra-low power, high-performance Bluetooth broadcast positioning device.
Designed to provide you with real-time, accurate location information, it is suitable for asset
tracking and location beacons. The product features a compact design, extremely low power
consumption, and can operate stably for long periods using the built-in battery.
II. Key Features
Dedicated Broadcast Mode: Transmits broadcast signals only; does not scan or accept
connection requests, ensuring extremely low power consumption.
Low Power Design: Utilizes optimized hardware and firmware design to maximize battery life.
Stable Broadcasting: Continuously and stably transmits Bluetooth broadcast signals at a
default interval of 3 seconds.
Compact Structure: High level of module integration, equipped with a custom-molded
housing, achieving IP67 waterproof rating through ultrasonic sealing, suitable for various
application environments.
III. Hardware Specifications
Core Chip: WCH CH592D Bluetooth Chip
Operating Frequency: 2.4GHz ISM Band
Broadcast Content: Customizable (configured before shipment), typically includes unique
device ID, signal strength, etc.
Broadcast Interval: 3 seconds (typical, customizable upon request)
Antenna: Integrated PCB Antenna
Power Supply:
Operating Voltage: 3.0V DC
Power Source: Built-in Lithium Manganese Dioxide Battery (Capacity 600mAh)
Battery Life: Theoretically up to several years (depending on broadcast power and
environmental temperature; typically >5 years under typical conditions)
Operating Temperature: -20℃ ~ +70℃
IV. Installation and Usage
Unboxing: Open the package and remove the product.
Installation: Secure the device to the target location using self-tapping screws or other
methods (such as adhesive backing, depending on the actual design).
Indicator Light: This product is designed for ultimate low power consumption and typically
does not include an operational indicator light. The broadcast function is enabled by default.
Application: Use any terminal device that supports Bluetooth scanning to detect the
broadcast signal from this device nearby.
V. Precautions
Battery Safety:
Do not charge, heat, short-circuit, or disassemble the battery.
Do not apply excessive force or crush the product.
Operating Environment: Avoid prolonged use in environments with strong corrosive gases,
liquids, or extreme high temperatures and high humidity.
Compliance Statement: This product complies with relevant radio transmission equipment
regulations. Before use, please ensure you understand and adhere to the radio management
regulations of your country or region.
VI. Product Identification
The product casing is printed with the company logo and an SN label. This number is the
product's unique identity identifier. Please keep it safe for future inquiries.
Ⅶ. FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
