5VRGB-HBD
User's manual
Scan this QR code to download
the APP and control the lights
For instructions on the APP,
Please refer to the "Help" Of the software.
Indoor use only
III
Class III appliance
Caution: The user is cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance
of 20cm between the radiator and your body.
“Information to User”
W
ON
R G B
OFF
Night
Speed+ Mode
1H
2H
Speed-
2 3
4
①Brightness +/-
②On/ Off
③Static Mode
④Timming
⑤Dynamic mode adjustment
⑥Music sync color change
① Remove the card slot and drawing board.
Align the drawing board with one end of the
card slot and insert it until both ends of the
card slot are aligned with the edges of the
drawing board.
② Take out the chain, align the hook with
the pre-drilled hole on the drawing board,
and insert it. Repeat the same process for
the other hook.
English/英语
User's manual
Thank you for choosing our products. Please read the instructions carefully before using this
product. Its strongly recommended that you keep this user manual for reference.
1. Product Information
• Product Name: LED Painting Lights
• Model Number: 5VRGB-HBD
• Manufacturer Name: Shenzhen Bojia Electronic Technology Co., LTD
• Address: 2nd Floor, Building 5, Tongfuyu Xufa Science Park, Shangcun Village,
Gongming Street, Guangming District, Shenzhen City, Guangdong, China
• Manufacturer Contact Information: [email protected]
• Intended Use/Product Function: Used for decoration and painting
• EU Authorized Representative Name & Address
ELING ITALIA S.R.L. E-mail: [email protected]
ITALY Milano (MI) - Via Del Lauro 9 CAP 20121 LEXIA AVVOCATI
EC
REP
ELINGEN LTD E-mail: [email protected]
2 Frederick Street, Kings Cross, London, WC1X 0ND, UK
REP
UK
TTT Representative LLC E-mail: [email protected]
2450 Colorado Avenue, Suite 100E, Santa Monica, CA 90404, United States
REP
US
REP
TUR
TTT REPRESENTATIVE DANISMANLIK LIMITED SIRKETI E-mail: [email protected]
ESENTEPE MAH. BUYUKDERE CAD. LOFT RESIDANCE NO:201 IC KAPI
NO:40 SISLI /ISTANBUL
• UK Authorized Representative Name & Address
• US Authorized Representative Name & Address
• TUR Authorized Representative Name & Address
2. Security Information
• This product is not a toy. Keep out of reach of infants and children.
• For indoor use only.
• Do not put this product into fire or place it in an excessively hot environment.
• If you do not use this product for a long time, please cut off the power.
• Please use a standard safety power supply to power this product. Do not use fast charging.
• Clean the product with a dry, soft cloth only.
• Disconnect the power supply or remove batteries before cleaning or maintenance.
• This product uses 2 AAA batteries for remote control, and the remote control does not
come with a battery.
3. Maintenance and upkeep
5. Installation Instructions
• Do not dispose of discarded electronic products with household waste.
• Please recycle them at locations with recycling facilities.
• For recycling advice, please consult your local authorities or retailers.
4. Recycling Instructions
6. Troubleshooting instructions
Problem Possible Cause Solution
The light is not on Power not connected
Check the power connection
Remote control faulty
Lights flashing
Some lights faulty
The battery is dead
Loose connection
Product damage
Replacement battery
Ensure all connections are secure
Stop using and dispose of properly
