Instruction Manual
PRESSURE WASHER
HYW2000E
WARNING: Read the instructions carefully before use.
Iss: Jan/25
Contents
www.hyundaipowerproducts.co.uk
2
Introduction……..……………………………3
Specifications……………………...............44
Safety Information…..…………………..4-14
Understand Your Machine.…..…………...4
Personal Safety...…….……………………4-5
Inspect Your Machine…………………...5-6
Work Area…….……………………………....6
During Use…….…………………………….7-8
Electricity…….………………...………...….9-10
Double Insulated Devices…......…….........10
Vibrations….…………………………...........11
Noise…….……………………………...........11
Residual Risks…………………....................11
Intended Use………………………............12
Personal Protective Equipment…...........13
Symbols On The Machine………….……..14
Unboxing…………………………...............15
In The Box/ Features…..…….….............16-17
Assembly……..……………………..........18-35
Assembly Overview……………………….18
Attach Handle/Reel To Main Unit…....18-19
Attach Lance/Trigger Gun Holder…..….19
Attach Hose/Power Cable Holder……....20
Attach Water Inlet Adapter...………...…21
Attach Hose To Machine………………...22
Attach High Pressure Hose To Gun….….23
Attach Water Supply Hose….....................24
Attach Accessories……………….......25-35
Operation……...………...…………….....36-40
Tips For Use……..…………...………….…....36
Before Starting Work.……………………...36
Starting….…..………………………...……37-38
Stopping……..………………………..…..39-40
Maintenance & Care………………….41-43
General Maintenance……………………41
Storage………………………………….……41
Cleaning…...…………………………….…..41
Replacement Parts/Spares…………….…42
Troubleshooting………………………….…43
Recycling And Disposal..………………...45
Declaration Of Conformity…..…………..46
Notes………………………………….…..47-48
Useful Information…..……………………..49
Our YouTube Channel…..………………..49
Warranty…………………………….……….49
Manual Updates….……………………….49
Returning Your Product….……………….49
Leaving A Review….……………………...49
Ordering Spare Parts.……………….……..49
Product Record…..………………………...50
Contact Us…..……………………………....51
Introduction
Thank You For Purchasing Your HYUNDAI Product
We work very hard to give all of our customers the best possible service. If you
have any problems, before leaving negative feedback, please contact us to give
us a chance to resolve the issue. We would be delighted if you left us positive
feedback! Thank you for purchasing this product.
WARNING: READ THE INSTRUCTION BOOKLET THOROUGHLY BEFORE USING
THE MACHINE. Keep for future reference and pass it on if the machine is
loaned or sold to another user.
This manual has been produced by Hyundai Power Products and should be kept
with the product. Please read and understand these instructions before you use
your product. Failure to do this may result in personal injury or damage to the
product.
The safety precautions and warnings are to ensure your safety and protect you
from harm or damage to the product.
The information contained in this manual was accurate at the time of production,
however HYUNDAI Power Products may make modifications to the product
without notification.
!
Important!
www.hyundaipowerproducts.co.uk
3
Safety Information
Understand Your Machine
• WARNING! You must read these instructions carefully before operating the
machine. Make sure that you are familiar with the controls and properly operate
the machine. You must learn how to stop the machine quickly. If you do not
follow the warnings and instructions, it may result in fire and/or serious injury.
Make sure to save all warnings and instructions for future reference.
• Read this manual and labels affixed to the machine to understand its limitations
and potential hazards.
• Be thoroughly familiar with the controls and their proper operation. Know how to
stop the machine and disengage the controls quickly.
• If the unit is to be used by someone other than original purchaser, or is to be
loaned, rented, or sold, always provide this manual and any needed safety
training before operation. The user can prevent and is responsible for accidents
or injuries that may occur to themselves, to other people, or to property.
• Do not force the machine beyond its limits. Use the correct machine for your
application.
• Know how to stop the machine quickly in case of emergency. Understand the
use of all controls.
• ALL MAINTENANCE other than that listed in this manual, should be carried out by
professionally trained and certified personnel.
• When using this machine for the first time and before actual work, you MUST
learn how to handle the machine from an experienced or skilled person.
Personal Safety
• WARNING! Never allow children or people unfamiliar with these instructions to
use the product. Local regulations can restrict the minimum age of the operator.
• Keep children, pets, and other people not using the unit away from the work
area (at least 15m). Be alert and shut off the unit if anyone enters work area.
Keep children under the watchful care of a responsible adult.
• Stay alert, watch what you are doing and use common sense when operating
the machine. Never operate the machine when unwell or tired, or if you have
taken alcohol, medicine, drugs or any substances which may slow your reflexes
and compromise judgment. A moment of inattention while operating the
machine may result in serious personal injury.
• Appropriate Personal Protective Equipment (PPE), MUST be worn at all times
when operating or repairing the machine. Always wear anti-slip and resistant
work footwear and long trousers while using the machine. Do not use the
machine when barefoot, wearing sandals or similar lightweight footwear. Do not
wear chains, bracelets or clothing that is loose fitting or hanging ties or cords. Tie
long hair back. Always wear protective earplugs. Loose clothes, jewellery, or
long hair can be caught in moving parts. Protect eyes, face, and head from
objects that may be thrown from the unit. Always wear safety goggles or safety
glasses with side shields when operating.
• Always keep hands and feet away from all moving parts during operation.
Moving parts can cut or crush body parts. Always keep hands and feet away
from all pinch points.
!
!
www.hyundaipowerproducts.co.uk
4
Safety Information
Personal Safety (Continued)
• Do not touch parts that might be hot from operation. Allow parts to cool before
attempting to maintain, adjust, or service.
• Do not overreach. Keep proper footing and balance at all times. This enables
better control of the machine in unexpected situations. Extending your body too
far can result in a loss of balance and you may fall which will result in injury.
• Never place any part of your body where it would be in danger if movement
should occur during assembly, installation, and operation, maintenance,
repairing or moving.
• Keep in mind that the operator or user is responsible for accidents, hazards or
unexpected events involving the machine that occur to other people or their
property. It is the responsibility of the user to assess the potential risk of the area
where work is being carried out. The operator or user must take all necessary
precautions to ensure their own safety and that of others, especially on slopes or
rough, slippery and unstable ground.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Inspect Your Machine
• Check your machine before starting it. Make sure all components are in
good working order and securely tightened before use.
• You must check the general condition of the machine before use.
• Never operate the machine when it is in need of repair or is in poor mechanical
condition. Replace damaged, missing, or failed parts before using it. Please
keep the machine in safe working condition.
• Do not use the machine if the machine’s switch does not turn off the machine
when running. Any machine that can’t be controlled with the switch is
dangerous and must be replaced.
• Regularly check to see that any objects are removed from the machine area
before starting it. Failure to do this may result in personal injury.
• If the machine should start to vibrate abnormally, stop the machine and check
immediately for the cause. Vibration is generally a warning sign of trouble.
• Avoid accidental starting. Be sure the switch is off before transporting the
machine or performing any maintenance or service on the unit. Transporting or
performing maintenance or service on a machine with its switch on invites
accidents.
• Do not tamper with or disable safety systems.
• Only use manufacturer-recommended attachments.
• Before using, always visually inspect to see that the components are not worn
out or damaged.
!
!
www.hyundaipowerproducts.co.uk
5
Safety Information
• You must only work in daylight or with good artificial light in good visibility
conditions. Do not work at night, at times of heavy fog, or at any other times
when your field of vision might be limited and it would be difficult to gain a clear
view of the area.
• Keep people, children and animals away from the working area.
• Operate on flat, level ground.
• Never park the machine in a place with unstable ground which could give way.
• You must be careful near ravines, ditches or embankments.
• Exercise extreme caution when operating on or crossing gravel drives, walks, or
roads. Stay alert for hidden hazards or traffic.
• Do not work in the rain, when there is a thunderstorm or lightning risk, at times of
strong or gale force winds, or at any other times when the weather conditions
might make it unsafe to use this product. If there is bad weather conditions, do
not use the machine.
• Make sure you thoroughly inspect the entire work area and remove all objects
and anything that could be thrown by the machine or could damage the
machine (branches, stones, wire, toys, etc). Attempting to clear the work area
whilst using the machine will reduce your concentration and creates a trip
hazard. Any liquid spilled on the floor may result in you slipping.
• DO NOT operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools may create sparks, which may
ignite the dust or fumes.
• This machine is only for outdoor use.
!
Work Area
Inspect Your Machine (Continued)
• Keep the machine in good operating condition. Operating the machine in poor
or questionable condition could result in serious injury.
• Be sure all safety devices are in working order and warning labels are in place.
These items are installed for your safety.
!
www.hyundaipowerproducts.co.uk
6
Safety Information
• Never attempt to make any adjustments, while the machine is running.
• You must switch off the machine:
- Before checking or working on the machine.
- When transporting the machine.
- Whenever you leave the machine unattended.
- If the machine starts to vibrate abnormally.
• WARNING! If something breaks or an accident happens whilst working, you must
turn off the machine immediately and move the machine away to prevent
further damage. If an accident happens with injuries or third parties are injured,
carry out the first aid measures most suitable for the situation immediately and
contact the medical authorities for any necessary health care. Carefully remove
any debris that might cause damage or harm persons or animals should it not
be seen.
• Never operate the machine without the necessary components tightly
secured, or without safety devices, or if the hose and/or cable is
damaged or worn.
• Always disconnect the electricity and water supplies on completion of every job.
• This appliance has been designed for use with the detergent provided or the
detergent specified by the manufacturer, such as a neutral shampoo based on
biodegradable anionic surface active deter-gents. The use of other detergents
or chemicals may put the appliance’s safety at risk.
• Do not touch the plug and the appliance with wet hands or when barefoot.
• Do not direct the nozzle toward mechanical parts containing lubricant grease,
as the grease will dissolve and spread over the surrounding ground. Vehicle
tyres/tyre valves may only be cleaned from a minimum distance of 30 cm,
otherwise the vehicle tyre/tyre valve could be damaged by the high-pressure
jet. The first indication of this is a discoloration of the tyre. Damaged vehicle
tyres/tyre valves can be dangerous and can cause accidents, which can lead
to death.
• High pressure jets can be dangerous if subject to misuse. The jet must not be
directed at persons, animal, live electrical equipment or the machine itself.
• High pressure hoses, fittings and couplings are important for the safety of the
machine. Use only hoses, fittings and couplings recommended by the
manufacturer. (it is extremely important to protect these components against
damage by avoiding their improper use and protecting them against bending,
knocks and scratches).
• Do not direct the jet against yourself or others in order to clean clothes or
footwear.
• Risk of explosion — Do not spray flammable liquids.
• Appliance with fluid under pressure. Keep a firm hold on the gun and be
prepared to take the kickback pressure. Only use the high pressure nozzle
provided with the appliance.
!
During Use
www.hyundaipowerproducts.co.uk
7
Safety Information
• Do not leave the machine during standby for more then 5 minutes.
• Any automatic start of the machine without pressing the gun trigger is
attributable to air bubbles in the water or other similar phenomena which do not
imply the existence of any defects in the machine. To follow best practice in this
event, ensure the hose is undamaged and fitted correctly to rule out any
possibility of leaks.
• When winding and unwinding the pipe take care not to cause the high-pressure
cleaner to overturn.
• Before unwinding or winding the hose, switch the machine off and release the
pressure in the hose itself (switching off).
• If an extension cord is used, the plug and socket must be of watertight
construction.
• DO NOT direct the spray at people, animals, live electrical equipment or the
appliance.
• Do not allow the high pressure hose to bend.
• Do not put any weight on the high pressure hose.
• Do not use the high pressure hose if it is in a knot or loop.
• Never start the high-pressure cleaner without first completely unwinding the high-
pressure hose.
• Make sure the high pressure hose does not have any loops or tangles.
!
During Use
www.hyundaipowerproducts.co.uk
8
Safety Information
!
Electricity (Where Applicable)
www.hyundaipowerproducts.co.uk
9
!
DANGER : ELECTRICITY CAN KILL – NEVER WORK ON LIVE / ENERGISED EQUIPMENT.
• Prior to carrying out any maintenance work you MUST identify electrical
isolation methods and isolate all electrical supplies.
• Prior to use and with all electrical supplies isolated, you MUST check all
electrical cables, plugs and connectors for the following;
- Are intact and have no signs of damage, to include but not limited to bare wires,
chaffing, cuts and loose wiring.
- If there are any signs of damage, the damaged item MUST be taken out of
service until the damage has been repaired by a certified/authorised electrical
professional.
- All trailing cables should be routed so as not to cause any kind of trip hazard.
- NEVER work on or near electricity with wet hands, wet clothing and wet gloves.
Safety Information
Electricity (Continued)
• Power tools plug must match the outlet. Never modify the plug in any way
Unmodified plugs and matching outlets will reduce risk of electric shock.
• Water entering a power tool will increase the risk of electric shock. DO NOT
abuse the power cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep the cord away from heat, oil and sharp edges or moving
parts. Damaged or entangled cords increase the risk of electric shock. When
operating a power tool, use an extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric shock.
• NOTE: Keep the product, cables and extension leads away from pooling water
during use.
• IMPORTANT: Make sure that the electric circuit is fused, and that the power,
voltage and frequency of the motor is supported by your mains supply. Also,
make sure that your power supply is earthed. Connect your machine to earth.
Never open the ON/OFF switchbox. However, if it should become necessary to
do so, contact a qualified electrician. Make sure that you will never touch live
contacts, specifically when you plug or unplug your machine. This machine and
its power cord must never get into contact with water.
• Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
• To prevent electric shock, use only with an extension cord suitable for outdoor
use. Class II appliances used in a hazardous environment such as a garden MUST be used
with a 30mA RCD protected supply.
• Before use, check that the extension cord is in good condition. When using an
extension cord, make sure to use one heavy enough to carry the current your
product will draw. An undersized cord will cause a drop in line voltage resulting
in loss of power and overheating.
• Do not allow any part of the machine to make contact with water while it is in
operation. If the appliance becomes wet while turned off, wipe dry before
starting.
• Do not touch the appliance or its plug with wet hands or while standing in
water. Wearing rubber boots offers some protection.
• Before use, check the supply and extension cord for signs of damage or aging. If
the cord becomes damaged during use, disconnect the cord from the supply
immediately. If the supply cord is damaged, it must be replaced by the
manufacturer or a qualified person in order to avoid a hazard.
!
Double-Insulated Appliances
In a double-insulated appliance, two systems of insulation are provided instead of
grounding. Servicing a double-insulated appliance requires extreme care and
knowledge of the system, and should be performed only by qualified service
personnel. Replacement parts for a double-insulated appliance must be identical
to the parts they replace.
!
www.hyundaipowerproducts.co.uk
10
• The operating noise of the machine can damage your hearing. When wearing
protection such as earplugs or ear defenders to protect your hearing. Long-term
and regular users are advised to have hearing checked regularly. Be especially
vigilant and cautious when wearing ear protection because your ability to hear
alarm warnings will be reduced.
• Noise emissions for this equipment is unavoidable. Carry out noisy work at
approved times and for certain periods. Limit the working time to a minimum. For
your personal protection and protection of people working nearby it is also
advisable for them to wear hearing protection.
• See Certificate of Conformity section for Outdoor Noise declaration of
conformity.
Safety Information
• Prolonged use of hand held (operated) machines will cause the user to feel the
effects of/from vibrations. These vibrations can lead to white finger (Raynaud’s
phenomenon) or carpal tunnel syndrome. This condition reduces the ability of
the hand to feel and regulate temperature, causing numbness and heat
sensations and may cause nerve damage and circulatory tissue death.
• Not all factors that lead to white finger disease are known, but cold weather,
smoking and other diseases that affect blood vessels and blood circulation as
well as large and long-lasting impact of shocks are considered factors in the
formation of white finger. Note the following to reduce the risk of white finger
and carpal tunnel syndrome;
• Wear gloves and keep your hands warm.
• Take regular breaks.
• All of the above precautions may help reduce the risk of white finger disease but
not rule out the carpal tunnel syndrome. Long-term and regular users are
therefore recommended to observe the condition of your hands and fingers.
Seek medical attention immediately if any of the above symptoms should occur.
!
Vibrations (Where Applicable)
!
Noise (Where Applicable)
Even when the tool is used as prescribed it is not possible to eliminate all residual
risk factors. The following hazards may arise in connection with the tool’s
construction and design:
1. Some applications of the product may require the use of a dust mask.
2. Health defects resulting from vibration emission if the power tool is being used
over longer period of time or not adequately managed and properly
maintained.
WARNING! This machine produces an electromagnetic field during operation.
This field may under some circumstances interfere with active or passive medical
implants. To reduce the risk of serious or fatal injury, we recommend persons with
medical implants to consult their physician and the medical implant manufacturer
before operating this machine.
!
Residual Risks
!
www.hyundaipowerproducts.co.uk
11
Safety Information
The HYW2000E is an electric pressure washer from HYUNDAI. The HYW2000E is
powered by a 2000W HYUNDAI motor.
The machine is manufactured according to the latest safety requirements. Every
precaution is only effective when it is followed exactly.
Intended Use
The machine can be used for washing surfaces outdoors, whenever pressurised
water is required to remove dirt.
This machine is not suitable for environments with an ambient temperature in
excess of 32°C
User Types
This machine is intended for use by consumers, i.e. non professional operators. The
machine is intended for “DIY” and domestic use only.
Improper Use
Any other usage not in keeping with the above mentioned ones may be hazardous
and harm persons and/or damage things. The machine is designed for using clean
water, do not use corrosive chemicals.
!
Intended Use
www.hyundaipowerproducts.co.uk
12
Safety Information
Appropriate Personal Protective Equipment (PPE), MUST be worn at all times when
operating or repairing the machine. No protective equipment can ensure 100%
protection.
When selecting PPE, make sure it’s CE marked and it suits the user in terms of size,
fit, etc. If more than one item of PPE is worn at the same time, make sure they can
be used together, e.g. wearing safety glasses may disturb the seal of a respirator,
causing air leaks.
!
Personal Protective Equipment
Hand Protection Must Be Worn
Protective electrically non-conductive gloves are highly
recommended when working.
Foot Protection Must Be Worn
Non-skid heavy duty footwear are highly recommended when
working.
Hearing Protection Must Be Worn
Suitable safety hearing protection is recommended.
Eye Protection Must Be Worn
Always wear safety glasses/goggles and/or face shields. Everyday
eyeglasses have only impact resistant lenses; they are not safety
glasses/goggles.
Protective Clothing Must Be Worn
Do not wear loose clothing, gloves, scarfs, neckties or jewellery (rings,
wrist watches), which can be caught in moving parts.
www.hyundaipowerproducts.co.uk
13
Safety Information
We have provided safety messages in this manual and on the machine. This
information alerts you to potential hazards that could hurt you or others. Please
read these messages carefully. However, we may not have listed all of the possible
hazards, you must also use your own judgement.
!
Symbols On The Machine
Symbol Description Symbol Description
DO NOT direct the spray
at people, animals, live
electrical equipment or
the appliance.
Class II tools symbol.
Disposal.
Sound power level LWA data in
dB.
This product complies with
the European directives
and an evaluation method
of conformity for these
directives was done.
Do
not expose to rain or use in
damp
conditions.
To reduce the risk of injury,
the user must read and
understand owner’s
manual before using this
product.
Always
wear safety goggles or
safety
glasses with side shields
and,
when necessary, a full
face
shield when operating this
product.
To reduce the risk of injury
from kickback, hold the spray
lance securely with both
hands when the machine is
on.
To
reduce the risk of injection or
injury,
never direct a water
stream
towards people or pets
or
place any body part in the
stream.
All
tools, hoses and packaging
should
be sorted, taken to the
local
recycling centre and
disposed
of in an
environmentally
safe way.
www.hyundaipowerproducts.co.uk
14
The UKCA (UK Conformity
Assessed) marking is a UK
product marking that is required
for goods being placed on the
market in Great Britain
(England, Wales and Scotland).
Unboxing
!
WARNING : Unboxing and assembling the machine should be done on a flat,
surface with enough room. Disposal of the packaging should be done in
accordance with the local regulations in force.
1. Carefully remove the product from the packaging and examine it for any sign of
damage caused during shipping.
2. Lay the contents out and check them. If any part is damaged or missing, you
must not use the machine. Contact HYUNDAI POWER PRODUCTS immediately.
3. You must keep the packaging material in case the machine needs to be
returned or repaired.
4. Ensure that you have all the accessories and tools you need for assembly and
operation including the suitable personal protective equipment.
We recommend that you fill out the information in the ‘Product Record’ section. If
you need to contact an authorised dealer or customer service, you may need to
provide this information.
!
WARNING : Some of the packaging material may be harmful to children. Keep
out of reach of children.
www.hyundaipowerproducts.co.uk
15
In The Box/Features
www.hyundaipowerproducts.co.uk
17
Main Body
This is the main part of the pressure washer.
A
Carry Handle
This is located the top of the machine so you can carry it.
B
On/Off Switch
Use this to turn the machine on and off.
C
Water Outlet
Connect the high pressure hose here.
D
Power Cable
Plug into a standard 13A 230v UK 3-pin socket to power the machine.
E
T
Water Inlet
This is where you connect the water supply.
F
G
Spray Lance
You can attach the variable jet nozzle to this.
G
Detergent Bottle
Ideal for cleaning cars, motorcycles, etc. Also for applying cleaning products to
wood and stone surfaces.
H
Variable Jet Nozzle
This creates a powerful, concentrated jet of water.
I
Pressure Washer Gun with Trigger Handle
You must hold this with both hands when using the machine.
J
Cleaning Brush
Use this to remove stubborn mud, grease and grime, and/or to clean wheels.
K
High Pressure Hose
This delivers the water to the pressure washer gun.
L
M
Cleaning Pin
Use this to remove debris from the variable jet nozzle.
Water Inlet Adapter
This screws onto the water inlet and connects to garden hose connectors.
N
User Manual
You must read this before use.
O
High Pressure Hose Hook
This attaches to the side of the machine to keep the hose tidy.
P
Pressure Washer Gun/Accessory Holder
This slots to the side of the machine so you can hook the gun onto the main
body.
G
Q
Trigger Lock
This locks the trigger to stop it being accidentally pressed.
R
Continued on next page
In The Box/Features
www.hyundaipowerproducts.co.uk
18
Accessory Rack
This slots at the back of the machine so you can attach various attachments to
the main body.
S
T
Patio Cleaner
You can attach this to the spray lance.
U
Rotating Brush
You can attach this to the trigger gun.
Hose Connector
This connects to the water outlet.
V
Assembly
www.hyundaipowerproducts.co.uk
19
Assembly Overview
There are 8 steps to the assembly:
STEP 1: Attach The Handle To The Main Unit
STEP 2: Attach The Lance/Trigger Gun Holder
STEP 3: Attach High Pressure Hose/Power Cable Holder
STEP 4: Attach The Water Inlet Adapter
STEP 5: Attach High Pressure Hose To Machine
STEP 6: Attach High Pressure Hose To Trigger Gun
STEP 7: Attach Water Supply Hose
STEP 8: Attach The Accessories
STEP 1 : Attach The Handle/Reel Assembly To The Main Unit
NOTE: The handle and hose reel will already be assembled when unboxing the
product. The hose/reel assembly will need to attached to the main unit.
1. Slot the carry handle into place on top of the machine.
2. With two of the screws provided, locate the holes on the left and right side of the
handle and tighten the screws until the handle is secure.
NOTE: A pack of two screws are provided in the box contents. A Phillips
screwdriver (not included) is required to tighten the screws.
Assembly
www.hyundaipowerproducts.co.uk
20
STEP 1: Attach The Handle/Reel Assembly To The Main Unit (Continued)
This picture illustrates the handle/reel assembly
fitted to the main unit in the correct orientation.
STEP 2: Attach The Lance/Trigger Gun Holder
1. Locate the bracket at the side of the machine and slot the lance/trigger gun
holder into place as pictured below.
NOTE: You can use the lance/trigger gun holder to neatly secure and store the lance
and trigger gun without them becoming detached from the machine.
NOTE: The picture (Bottom Right) displays the holder fitted in the correct orientation.
Assembly
www.hyundaipowerproducts.co.uk
21
STEP 3 : Attach High Pressure Hose/Power Cable Holder
1. Locate the bracket at the side of the machine and slot the high pressure hose
holder into place as pictured below.
NOTE: You can use the high pressure hose holder to neatly secure and store the hose
without it becoming detached from the machine and/or tangled.
NOTE: Use the holder to store the high
pressure hose as pictured (left).
Assembly
www.hyundaipowerproducts.co.uk
22
STEP 4 : Attach The Water Inlet Adapter
!
WARNING: Ensure the ON/OFF switch is in the OFF position when connecting
the water inlet adapter
1. Locate the water inlet at the rear of the machine (as pictured).
2. Screw the water inlet adapter by hand until it is firmly secured to the
machine.
Assembly
www.hyundaipowerproducts.co.uk
23
STEP 5 : Attach High Pressure Hose To Machine
1. Take the end of the hose, which includes the threaded coupling, and align it to
the water outlet at the front of the machine.
2. Insert the end of the hose into the water outlet and screw the coupling
clockwise onto the thread of the water outlet until tight and secure.
NOTE: Ensure the high pressure hose is firmly connected by pulling the hose
backwards to check its secure.
NOTE: This picture illustrates the high
pressure hose securely fastened to the
water outlet at the front of the
machine.
Assembly
STEP 6 : Attach High Pressure Hose To The Trigger Gun
1. Attach the high pressure hose to the gun by pressing the button
inwards (as pictured below) and guiding the hose upwards into its
designated slot in a simultaneous action.
Once the button has been released and the hose has been
inserted into its designated slot, the hose will remain in place.
NOTE: To detach the hose from the gun, press the same button
inwards and pull down on the hose to remove it from its designated
slot.
Press the button inwards to
attach and release the hose
www.hyundaipowerproducts.co.uk
24
!
IMPORTANT: Please ensure the hose is securely locked to the gun to
avoid any leaks during operation.
!
WARNING: Please ensure that both the mains water supply and
power supply are switched off before attaching/detaching the hose to
and from the gun.
Assembly
STEP 7 : Attach Water Supply Hose
1. Connect the water supply hose (not included) to the inlet at the rear
of the machine using a quick release garden hose connector.
2. Connect the hose with the quick release fitting to the inlet adapter,
which is screwed onto the water inlet (see Step 3 on Page 20).
NOTE: You will hear an audible click as the quick release garden hose
fitting connects to the inlet adapter.
3. Once you are ready to work, turn the water supply on at the tap.
- Maximum intake water temperature: 50°C
- Maximum inlet water pressure: 0.4MPa (4 bar)
Quick release
garden hose fitting
www.hyundaipowerproducts.co.uk
25
!
IMPORTANT: Only clean or filtered water should be used for intake.
The delivery of the water intake tap should be equal to the double of
the maximum pump range.
!
IMPORTANT: DO NOT switch on the power supply until the water
supply has been successfully connected to the machine via the water
inlet.
NOTE: The hose connector is included in the scope of the delivery. This
is designed to connect the water supply hose to the water inlet
adapter.
Assembly
STEP 8 : Attach Accessories
Pressure Washer Gun with Trigger Handle
You must hold this with both hands when using the machine.
Spray Lance
You can attach the adjustable nozzle to this.
Variable Jet Nozzle
This creates a powerful, concentrated jet of water.
Detergent Bottle
Ideal for cleaning cars, motorcycles, etc. Also for applying cleaning products
to wood and stone surfaces.
Included Accessories:
www.hyundaipowerproducts.co.uk
26
Cleaning Brush
Use this to remove stubborn mud, grease and grime, and/or to clean
wheels.
G
I
H
R
K
G
H
I
K
R
T
U
T
Patio Cleaner
You can attach this to the spray lance.
U
Rotating Brush
You can attach this to the trigger gun.
Hose Connector
This connects to the water outlet.
V
V
Assembly
Spray Lance and Variable Jet Nozzle
How To Attach (Spray Lance)
1. Begin by aligning the spray lance to the pressure washer gun handle.
2. Align the two studs on the end of the spray lance to the two grooves
located on the inside of the trigger gun barrel.
3. Once connected, push the spray lance towards the barrel and twist the top of
the lance (area closest to the barrel) anti-clockwise until secure.
How to Remove: To detach the lance from the gun handle, push the lance towards
the barrel of the gun and twist the lance clockwise to release.
www.hyundaipowerproducts.co.uk
27
Align the lance to the trigger gun as described above
and twist the lance anti-clockwise to lock it into
place.
This picture displays the lance successfully connected to the
trigger gun.
Assembly
Spray Lance and Variable Jet Nozzle (Continued)
How To Attach (Variable Jet Nozzle)
1. Attach the adjustable nozzle to the spray lance by aligning the two studs on the
end of the nozzle to the two grooves located on the inside of the lance’s barrel.
2. Once aligned, push the nozzle into the end of the lance’s barrel.
As it connects, you will hear an audible click.
How to Remove: To detach the adjustable nozzle from the lance, press the blue
‘Push’ button on the end of the lance and pull the nozzle away of the lance to
release.
www.hyundaipowerproducts.co.uk
28
Picture displays correct attachment of adjustable nozzle.
Assembly
Variable Jet Nozzle
How to Use the Variable Jet Nozzle
By twisting the nozzle (either anti-clockwise or clockwise) you can change the width
of the spray, which, in turn, adjusts the intensity of the spray.
The wider the spray, the less pressure which is ideal for delicate surfaces. The
narrower the spray, the higher the pressure.
Narrow Spray
To create a narrow spray pattern, twist the nozzle anti-clockwise. The narrow setting
creates the most intense spray pattern.
Wide Spray
To create a wide spray pattern, twist the nozzle clockwise. The wide setting creates
least intense spray pattern.
WARNING: DO NOT adjust the nozzle when the trigger is squeezed.
Figure 1 displays the variable
nozzle fully closed and creating
a narrow spray pattern.
Figure 2 displays the variable
nozzle fully open and creating a
wide spray pattern.
www.hyundaipowerproducts.co.uk
29
Spray Pattern Uses Surfaces
Narrow Pattern Intense cleaning of
unpainted, hard
surfaces.
Suitable for:
• Driveways
• Grills
• Brick or concrete
paths and
walkways
• Unpainted brick
Wide Pattern Cleaning of
painted or delicate
surfaces.
Suitable for:
• Vehicles
• Wood
• Painted brick
• Vinyl
• Painted siding
Assembly
www.hyundaipowerproducts.co.uk
30
Variable Jet Nozzle (Continued)
Variable Jet Nozzle Uses
You can use the variable jet nozzle to change from a narrow spray to a
wide spray. The wider the spray, the less pressure which is ideal for
delicate surfaces. The narrower the spray, the higher the pressure.
Assembly
www.hyundaipowerproducts.co.uk
31
Attaching The Cleaning Brush To The Trigger Gun
1. Begin by attaching the cleaning brush to the pressure washer gun handle.
2. Attach by aligning the two studs on the end of the cleaning brush to the
two grooves located on the inside of the trigger gun barrel.
3. Once connected, push the cleaning brush towards the barrel and twist the top
of its shaft (area closest to the barrel) anti-clockwise until secure.
How to Remove: To detach the cleaning brush from the gun handle, push the
rotating brush towards the barrel of the gun and twist the shaft clockwise to
release. You can then pull the brush away from gun barrel once it has been
released.
Align the cleaning brush to the trigger gun in the
orientation as described above.
The above illustration displays the cleaning brush successfully attached
to the trigger gun.
Assembly
www.hyundaipowerproducts.co.uk
32
Attaching The Rotary Brush To The Trigger Gun
1. Begin by aligning the rotary brush to the pressure washer gun handle.
2. Attach by aligning the two studs on the end of the rotary brush to the two
grooves located on the inside of the trigger gun barrel.
3. Once connected, push the rotary brush towards the barrel and twist the top of
its shaft (area closest to the barrel) anti-clockwise until secure.
How to Remove: To detach the rotary brush from the gun handle, push the brush
towards the barrel of the gun and twist the shaft clockwise to release. You can
then pull the brush away from gun barrel once it has been released.
Align the rotary brush to the trigger gun in the
orientation as described above.
The above illustration displays the rotary brush successfully
attached to the trigger gun.
Assembly
www.hyundaipowerproducts.co.uk
33
Attaching The Patio Cleaner To The Trigger Gun
How To Attach (Patio Cleaner)
1. Attach the patio cleaner to the spray lance by aligning the two studs on the end
of the nozzle to the two grooves located on the inside of the lance’s barrel.
2. Once aligned, push the end of the patio cleaner into the end of the lance’s barrel.
As it connects, you will hear an audible click.
How to Remove: To detach the patio cleaner from the lance, press the blue ‘Push’
button on the end of the lance and pull the patio cleaner away of the lance to
release.
NOTE: The above illustration displays the cleaning brush successfully attached to the
trigger gun.
Assembly
Detergent Bottle
How To Attach
1. The variable jet nozzle must be detached in order to connect the detergent
bottle to the spray lance.
2. Guide the detergent bottle connector into the end of the spray lance. The
detergent bottle will click into place if attached correctly.
NOTE: Ensure the detergent bottle is securely fastened to the spray lance before
operating.
NOTE: Ensure the detergent bottle is aligned with the
handle of the gun as pictured above.
Foam System Uses
Ideal for cleaning cars, motorcycles, etc. Also for applying cleaning products to wood
and stone surfaces.
!
CAUTION – Damage may occur to painted surfaces if detergent is allowed to
dry on the surface. Wash and rinse a small section at a time. Avoid working on hot
surfaces or in direct sunlight.
How To Remove
1. Detach the detergent bottle from the spray lance by pressing the blue ‘Push’
button on the end of the spray lance while pulling the detergent bottle away
from the lance in a simultaneous motion.
!
CAUTION: Ensure the water supply and machine is switched off before
attaching the detergent bottle to the spray lance.
Continued on next page
www.hyundaipowerproducts.co.uk
34
Slot the detergent bottle connector
into the spray lance as pictured.
Assembly
Foam Producer Bottle (Continued)
Using the Foam Producer Bottle
1. Unscrew the lid of the foam system attachment by turning the nozzle
mechanism clockwise. Pour in the detergent. Use the recommended mixing ratio
advised by the detergent manufacturer. Image 1.
2. Reattach the nozzle assembly back onto the bottle. Ensure the gap on the
nozzle mechanism’s lid sits between the two projections on the rim of the
bottle. Once aligned and slotted, twist the nozzle mechanism anti-clockwise
to lock. Image 2.
3. Screw the attachment onto the gun. Image 3.
4. After use, make sure you wash foam system out with water.
!
CAUTION – Only use detergents designed for pressure washers. DO NOT use
household detergents, acids, alkaline solutions, flammable materials, solvents or
industrial grade solutions. This could cause damage to the pressure washer.
Always test the detergent in an inconspicuous area before use.
Image 1
Image 2
Image 3
Continued on next page
www.hyundaipowerproducts.co.uk
35
Assembly
Foam Producer Bottle (Continued)
Image 1
Image 2
www.hyundaipowerproducts.co.uk
36
Image 3
How to Increase/Decrease the
Detergent Used
Increasing the Detergent – Twist the dial
anti-clockwise to the + position.
Decreasing the Detergent – Twist the dial
clockwise to the – position.
How to Adjust the Intensity of Foam Spray
Wide Spray Pattern – With the nozzle facing away from you, twist the nozzle anti-
clockwise to widen the spray pattern. This decreases the intensity of the spray.
(Image 2)
Narrow Spray Pattern – With the nozzle facing away from you, twist the nozzle
clockwise to produce a more intense and narrow spray pattern. (Image 3)
Assembly
www.hyundaipowerproducts.co.uk
37
Foam Producer Bottle (Continued)
Applying the Detergent
1. Once the detergent bottle has been appropriately filled, point the gun towards
the intended surface and squeeze the trigger. The detergent will come out through
the nozzle.
2. Ensure you apply the detergent thoroughly so it covers the cleaning surface.
3. Allow time for the detergent to soak into the surface before lightly scrubbing the
affected area with the appropriate cleaning material.
4. Once the detergent has been successfully applied for its intended use, remove
the detergent bottle and replace with the variable jet nozzle.
5. Rinse the affected area with clean water.
6. Always rinse the detergent bottle thoroughly after use.
Operation
Tips For Use
• Pressure washing can be dangerous if not done correctly, it is important to
prepare before working. Make sure you are wearing the correct PPE.
• Hold the pressure washer gun securely with both hands so you have control.
• Make sure you clear your work area before use. For example, if cleaning a patio,
remove any furniture, plant pots and ornaments before starting. We also
recommend using a broom to brush away any debris such as dirt and leaves.
• Take care when pressure washing near plants.
• If cleaning a vehicle, start at the top and work your way down.
• Do not hold nozzle too close to delicate objects.
• Make sure you read and understand the manual before use.
Before Starting Work
www.hyundaipowerproducts.co.uk
38
1. Check the condition of the cable, if damaged do not use.
2. Ensure that no objects are trapped into the machine.
3. Ensure the work area is tidy and free of any obstacles.
4. Never operate the machine if it is damaged in any way.
5. Check the pressure washer for leaks.
6. You must bleed the gun before use. Squeeze the trigger to allow any air to
escape. Continue until a stream of water comes from the nozzle.
Operation
Starting
1. Before connecting to the mains power supply, always check the switch on the
machine is in the off position. Image 1.
2. Connect to water supply.
3. Press the On/Off switch on the machine to the ON position. Image 2.
4. Turn the water supply on. Image 3.
!
YOU MUST read and understand the full safety instruction manual before starting
the machine. Ensure water and power supplies are switched OFF before starting.
Image 2
Turn the dial clockwise
to the ON position to
start the machine.
Continued on next page
Image 1
Image 3
5-50°C
www.hyundaipowerproducts.co.uk
39
Max.Water Inlet
Pressure 4bar
WARNING: Running the pump dry will damage the pump and void the warranty.
Operation
Starting (Continued)
5. If the trigger is locked, flick the trigger lock back against the trigger to unlock it.
Image 4.
6. Hold the gun with both hands and press the trigger). Image 5.
7. You must hold the gun with both hands so you have control. Image 6.
Image 4
Image 5
Image 6
www.hyundaipowerproducts.co.uk
40
Squeeze and hold the trigger to
operate the pressure washer gun.
Operation
Stopping (Continued)
2. Turn the water supply off. Image 2.
3. Unplug from the mains power supply. Image 3.
4. Release the trigger. Image 4.
5. Flick the trigger lock down to stop the trigger (U) from being pressed. Image 5. The
gun is fitted with a trigger lock. Whenever you stop using the machine, it is important
to operate the trigger lock to prevent accidental activation of the jet.
Image 2
Image 3
Image 4
Image 5
www.hyundaipowerproducts.co.uk
42
Release the trigger once you have
finished your cleaning task.
NOTE: Ensure that all pressure in the hose/lance is relieved before releasing the
trigger. Storing the lance with trapped pressure will cause damage.
Maintenance & Care
General Maintenance
!
WARNING : Turn OFF the machine and disconnect the power cord before
maintaining the machine. You need to wear proper clothing and protective gloves
whenever your hands are at risk.
• Keep all nuts, bolts and screws tight to be sure the machine is in a safe working
condition.
• Replace worn or damaged parts for safety. Only use manufacturer-
recommended parts and accessories.
• Check the pressure washer for any leaks.
Storage
!
Keep the machine stored in a dry, level area away from damp, moisture and
rain fall. Allow the machine to cool down before storing.
• Make sure the machine is clean and dry before storing. You can keep the cable
tidy by wrapping it around the hook on the rear of the machine. You can also
store the gun and accessories in the slots at the rear of the machine.
• Ensure the machine is stored in a position, where any persons cannot step on, to
attempt to reach items up high, due to risk of movement.
• DO NOT store the machine near an ignition source, such as a wood stove, gas
or electric heater, or an appliance or heater with a pilot light.
• Store the machine out of reach of children or anyone who is not familiar with
operation.
• DO NOT stack other items on top of the machine when in storage.
• Make sure the machine is stored away from direct sunlight. Store indoors or in a
safe, frost-free area during severe weather and winter months.
Cleaning
!
Always remove the electric plug from the mains supply before any cleaning is
undertaken.
• Use a clean cloth to remove dirt, grease, etc.
• DO NOT use any water on any part of the main machine.
• Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by
their use.
www.hyundaipowerproducts.co.uk
43
www.hyundaipowerproducts.co.uk
40
Replacement Parts/Spares Information
To maintain your machine in peak operating condition, proper maintenance and
care are crucial. Some machines have consumable parts that will need
replacement to ensure they continue operating at their full potential. Power-
Spares provide manufacturer parts for all your machines, ensuring they remain in
peak condition.
About Power Spares
Same Day Dispatch*No Hassle Returns
Over 10,000 Spare Parts
QR Code – Scan the QR code for a direct link
to our website
Our Website : power-spares.co.uk
Call us : 01646 404406
Email us : sales@power-spares.co.uk
Power-Spares has your back if you damage your lawn mower blade, find your
spark plugs not sparking, or snap your recoil. Power-Spares operates under the
trading name of Genpower Limited.
As part of the Genpower family, Power-Spares offers you the expertise, efficiency,
and quality assurance of a large organisation. We leverage the latest
warehousing, distribution, customer service, and inventory management
technology to ensure you receive your parts as quickly as possible.
With extensive stock-holding of spare parts in our UK warehouses, Power-Spares is
ready to assist you promptly when your machine needs repair. We’re Committed
to help you get back up and running as quickly as possible.
Maintenance & Care
Troubleshooting
Problem Possible Solution
Machine will not start. Check fuse in mains plug and replace if
necessary.
Check whether the voltage shown on the
rating plate corresponds to that of the
power source.
The cable could be damaged. Check the
cable for damage.
Machine does not reach operational
pressure.
Vent the appliance: allow the pump to
operate without the high-pressure hose
until water appears at the high-pressure
outlet without any more bubbles. Then
re-attach the high-pressure hose.
Clean the strainer in the water connection.
Clean the filter placed inside the hose
coupling (if set).
Check the inlet water flow rate.
Check all inlet pipes to the pump for leaks
or blockage.
Strong pressure fluctuations. Clean the high-pressure nozzle. Remove
dirt from the nozzle hole with a needle
(included in box contents) and then rinse
out with water from the front.
Pump leaks. 10 drops per minute are permissible. In the
case of more serious leakage, you should
contact your service dealer.
!
NOTE : All corrective actions should be carried out by suitably qualified person/s.
!
WARNING : The appliance is equipped with a motor protection device: in case
of intervention, wait a few minutes then disconnect and re-connect the product to
the electric system. If this problem happens again or if the product does not start
again, take the product to your service dealer.
www.hyundaipowerproducts.co.uk
45
Technical Data
www.hyundaipowerproducts.co.uk
46
Specification
Model HYW2000E
Voltage 240V
Frequency 50Hz
Power 2000W
Working Pressure 100bar
Maximum Pressure 150bar
Working Flow Rate 5.5L/min
Maximum Flow Rate 7.5L/min
Maximum Water Inlet Pressure 4bar
Maximum Water Inlet Temperature 50 Degrees Celsius
Declared Sound Power Level 92dB(A)
Net Weight 9kg
Recycling & Disposal
www.hyundaipowerproducts.co.uk
47
Recycling & Disposal
We do not offer a takeback scheme for the recovery of Waste Electrical Electronic
Equipment (WEEE) & Batteries. Instead the responsibility to dispose of WEEE and/or
Batteries is passed onto you by us.
So when it becomes necessary to dispose of your machine you must take it to your
local Civic Amenity Site. For further information please contact your local Authority
for disposal advice.
You MUST make sure that all unused oil and fuel is disposed of correctly either
beforehand or at your local Civic Amenity Site.
• Certain products contain WEEE waste which should not be disposed of in your
domestic waste.
• You MUST recycle WEEE in accordance with your local authority or recycling
centre.
• Certain products contain batteries which should not be disposed of in your
domestic waste.
• You MUST recycle batteries in accordance with your local authority or recycling
centre.
• Unwanted packaging and materials should be stored and taken to a recycling
centre so it can be disposed of in a manner which is compatible with the
environment.
We are a Member of the VALPAK National Compliance Scheme and our
registration number is RM08660. For further information about disposal please
contact your Local Authority.
You can also get more advice and guidance about recycling at the following
website http://www.recycle-more.co.uk
Should you pass this product on to another user either sold or loaned, you MUST
pass on this user manual. This will make sure that all other users can use and
maintain this machine safely.
1. Environmental protection should be a priority of considerable importance when
using the machine, for the benefit of both social coexistence and the environment
in which we live. Try not to cause any disturbance to the surrounding area.
2. You must comply with local regulations and provisions for the disposal of
packaging, oils, fuel, filters, damaged parts or any elements which have a strong
impact on the environment. This waste must not be disposed of as normal waste. It
needs to be separated and taken to specified waste disposal centres where the
material will be recycled.
3. You must comply with local regulations for the disposal of waste materials after
mowing.
4. When disposing, do not pollute the environment with the machine, but hand it
over to a disposal centre, in accordance with the local laws in force.
Environmental Protection
EU Declaration Of Conformity
Importer and Authorised Representative
Genpower Ltd
Isaac Way, Pembroke Dock, SA72 4RW
Country of Origin: China
Description: 2000W Pressure Washer
SKU Code: HYW2000E
Date of Issue: 10/09/2024
Regulations and Directives of Compliance
• EU Council Directive 2006/42/EC Machinery
• EC Council Directive 2014/30/EU Electromagnetic Compatibility
• RoHS (recast): Restriction of the Use of Certain Hazardous Substances in Electrical
and Electronic Equipment, 2011/65/EU Annex II and its amendment.
REFERENCES TO THE RELEVANT HARMONISED SAFETY STANDARDS USED OR
REFERENCES TO THE OTHER TECHNICAL SPECIFICATIONS IN RELATION TO
WHICH CONFORMITY IS DECLARED:
EN 60335-2-79:2012
EN 60335-1:2012+A11+A13+A1+A14+A2+A15
EN 62233:2008
EN 55014-1:2017+A11
EN IEC 61000-3-2:2019
BS EN 55014-1:2017+A11
BS EN 55014-2:1997+A1+A2
BS EN 61000-3-2:2014
BS EN IEC 61000-3-11:2019
Statement of Declaration
We the importer and authorised representative of the product described confirm
conformity within the provisions of applicable regulations and directives listed
within this document.
Signed on Behalf of Genpower Ltd
Place of Issue: Genpower Ltd
Signatory Name: Roland Llewellin
Position: Managing Director
………………………………
www.hyundaipowerproducts.co.uk
48
EN 55014-2:2015
EN IEC 61000-3-11:2019
BS EN 55014-2:2015
BS EN IEC 61000-3-2:2019
BS EN 61000-3-11:2001
Useful Information
www.hyundaipowerproducts.co.uk
51
Check Out Our YouTube Channel
Our videos on YouTube include:
• Unboxing
• Assembly of your machine
• How to service your machine
• Products in use
• ‘How To’ videos
• Product features
Go to YouTube and search ‘Hyundai Power Products’.
Manual Updates
Our manuals are constantly being reviewed and updated. Should you find an
error, omission or something unclear, please contact us for assistance. We reserve
the right to make any modifications without prior notice whenever necessary.
Our latest manuals are also placed online. All our manuals can be downloaded at:
www.hyundaipowerproducts.co.uk
Returning Your Product
If you are returning your product, please contact the dealer for their returns policy.
Leaving A Review
We work very hard to give all of our customers the best possible service. If you have
any problems, before leaving negative feedback, please contact us to give us a
chance to resolve the issue. We would be delighted if you left us positive
feedback! To leave a review, please go to:
uk.trustpilot.com/review/hyundaipowerequipment.co.uk
Ordering Spare Parts
You can find the spare part you are looking for at power-spares.co.uk
Warranty
Proof of purchase will be required before you make a warranty claim. Full warranty
terms and conditions can be found on the HYUNDAI POWER PRODUCTS website:
www.hyundaipowerproducts.co.uk
Product Record
www.hyundaipowerproducts.co.uk
52
Information
As soon as you have purchased the machine, we recommend that you fill out the
following. If you need to contact an authorised dealer or customer service for
information on servicing, you may need to provide the following information.
Date Of Purchase:……………………………………………………………………………….....
Dealer Name:………………………………………………………………………………………..
Dealer Phone:…………………………………………………………………………………….....
Model Number:…………………………………………………………………………………......
Serial/Batch Number:………………………………………………………………………..........
Contact Us
Need Help? Talk To Our Experts
Our friendly aftersales team will be more than happy to help you.
Phone
Call our team on 01646 687 880
Email
aftersales@hyundaipowerproducts.co.uk
Online Live Chat
Go to www.hyundaipowerproducts.co.uk
Post
Genpower Ltd, Isaac Way, Pembroke Dock, Pembrokeshire, SA72 4RW.
Hyundai Support Website
Go to hyundaisupport.co.uk
www.hyundaipowerproducts.co.uk
53
For Inquiries, Please Contact:
GENPOWER LTD
Isaac Way, London Road,
Pembroke Dock, UK, SA72 4RW.
T: +44 (0) 1646 687 880
E: info@hyundaipowerproducts.co.uk
www.hyundaipowerproducts.co.uk
Imported / Distributed by Genpower Ltd for
the United Kingdom & Ireland
Licensed by Hyundai Corporation Holdings, Korea
