LELIT PESBN03PSS1BXX1 Bianca Espresso Machine

Product's Documents

Below are documents related to this product, you can read online or download:

User Manual

This is the main product document for model PESBN03PSS1BXX1. Additionally, the document applies to other LELIT models: 3416155

The file format is pdf, 20 pages, you can download this manual here .

background
English
EN
User manual
*
PL162T-EU PL162T-AUS PL162T-120 PL162T-100
230 V
50 Hz
240 V
50 Hz
120 V
60 Hz
100 V
50/60 Hz
E+F I B B
The above information is valid for all versions:
stainless steel and any colored version.
background
2
LELIT Bianca - PL162T
THANK YOU FOR CHOOSING
A LELIT PRODUCT
Register your product on
care.lelit.com
Download the complete guide to get the most
of your coffee machine PL162T* and visit our
LELIT YouTube channel for insights,
tutorials, tips and tricks.
Save the box and
all the packaging material!
LELIT has studied the external and internal
packaging of your coffee machine to help you
re-use it in case of maintenance or repair need.
background
3
English
EN
Index
1. Daily cleaning 4
2. Weekly cleaning 4
3. Annual cleaning 6
4. Product overview 6
5. Factory settings 8
6. Equipment box 8
7. Packing 10
8. First start-up 10
9. How to install the water lter 11
10. Espresso and coffee 12
11. Steam and hot water 13
12. Reserve mode 14
13. LCC – LELIT Control Center 15
14. Stand-by mode 16
15. Limestone prevention 16
16. Warranty terms 17
ATTENTION:
Read the SAFETY NOTES carefully before using
this product.
background
4
LELIT Bianca - PL162T
1. Daily cleaning
1.1 1.2 1.3
Note. For an optimal result we suggest you use our kit PLA9101 that
contains a microber cloth with embroidered LELIT logo, a paintbrush with
bristles in natural bers and a brush with nylon bristles.
Before starting, remove the plug from the electrical outlet and allow the machine
to cool. Remember not to use abrasive detergents and do not immerse the
machine in water.
General cleaning. Use a soft cloth, preferably in microber (O), and moisten it
with tap water to clean the stainless steel appliance body of the machine (Pic 1.1).
Group cleaning. After each extraction empty the coffee lter, wash the
lterholder and the relative lter with tap water and use the brush (N) to eliminate
coffee residues from the group gasket (Pic 1.2).
Steam wand cleaning. After frothing the milk, clean the nozzle of the steam
wand (5) using a soft cloth and dispense a small quantity of steam to eliminate
every possible milk rests in the holes (Pic 1.3).
2. Weekly cleaning
Note. In the equipment box you’ll nd the detergents for the rst cleaning cycle
of the machine (I). Afterwards, we suggest you use our accessories PLA9201 and
PLA9203 (not included).
Note. Pay attention not to immerse the lterholder handle. Moreover,
lters and lterholder should never be washed in a dishwasher.
background
5
English
EN
Filters and portalter cleaning. It’s necessary to clean the lterholder to
eliminate the coffee residues that might affect the taste of your drink negatively.
Place a jug under the hot water wand (12), turn the knob (10) anti-clockwise and
take out about 1 l of water.
Insert the lterholder and the used lter into the jug and add 2 bags of detergent
powder (I) for 15 minutes (Pic 2.1). After 15 minutes, empty the jug and rinse the
lterholder and the lters with plenty of tap water.
2.1 2.2 2.3
min
15
10”x10
Backushing. Insert the blind lter (D) into the lterholder and pour 1 bag of
detergent powder (I) into the lter. Insert the lterholder in the group head (8)
and lift the lever (13) for 10 seconds (Pic 2.2).
Stop the function by lowering the lever (13) completely and wait for 10 seconds.
Repeat the procedure 10 times.
Remove the lterholder from the group head (8) and rinse it with hot water from
the brewing group (Pic 2.3). Re-insert the lterholder in the group (8) and repeat
the previous operation 5 times for 10 seconds each time, without detergent
powder.
Remove the lterholder and take out the blind lter (D). Empty the drip tray (16)
and rinse the lterholder, the lter and the drip tray with plenty of tap water.
2.4
5”x10
Steam wand cleaning. Fill a jug with 500 ml of cold
water, add the content of 1 bottle of detergent liquid
(I) and immerse the steam wand (5) in this solution.
Open the knob (4) by turning it anti-clockwise and
dispense steam for 5 seconds. Stop the function
and wait for 5 seconds.
Repeat the operation 10 times (Pic 2.4). Repeat the
entire procedure using 1 l of fresh water to rinse the
steam wand (5) properly.
background
6
LELIT Bianca - PL162T
Additionally, you can wash the exterior part of the steam wand (5) with a damp
cloth and release some steam to remove any milk residues from inside the tube, as
these could obstruct the steam output, making it more difcult to froth milk properly.
3. Annual cleaning
The descaling of the hydraulic circuit of the machine must be done every year to
ensure longevity and constant performances. The state of the machine needs to
be checked previously by your reseller/specialized technician and the descaling
operation must be done by a specialized technician to avoid ruining the internal
components of the machine.
4. Product overview
1. Water tank cover
2. Water tank
3. Hot surface with grate for cups
4. Steam dispensing knob
5. Multi-directional, anti-burn steam
wand
6. ON/OFF main switch (with lighted
frame)
7. LCC (LELIT Control Centre)
8. Brewing group
9. Paddle
10. Hot water dispensing knob
11. Brewing group manometer
12. Multi-directional, anti-burn hot
water wand
13. Brewing group lever
14. Manometer for steam and pump
pressure
15. Grate for drip tray
16. Drip tray
background
7
English
EN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PIC. 2
Paddle
LELIT paddle enables the experience of preparing high quality espressos,
reaching unique extraction results. The water ow can be changed in every
moment of the coffee delivery, until the maximum pressure is reached.
9
The data and images shown may undergo variations without notice in
order to improve the performance of the machine.
background
8
LELIT Bianca - PL162T
5. Factory settings
Coffee boiler temperature
95°C
Steam boiler temperature
125°C
Steam boiler
ON
Default temperature scale
Celsius
Programmable
pre-infusion times
OFF
Programmable low ow
times
OFF
Brew temperature off-set
0°C
Sleepy mode
OFF
Stand-by
ON
To use the machine with different settings, download the extended guide, that
contains the instructions on how to set other functioning features.
6. Equipment box
A. 1 dose (9-11 g) coffee lter
B. 2 doses (14-18 g) coffee lter
C. 2 doses (18-21 g) coffee lter
D. Blind lter for backushing
E. 4-holes steam wand tip
F. Filterholder for 1 cup and 2 cups
lters and bottomless lterholder
G. Accessories for water
mains connection
H. Raiser for espresso cups
I. First cleaning kit (with 3
detergent powder single-dose
bags and 1 single-dose bottle)
J. Tamper
K. Plastic spoon for coffee powder
L. Power cord
M. LELIT 70 l water lter
N. Brush for group head cleaning
O. LELIT microber cloth
background
9
English
EN
Discover all the accessories and the necessary instruments to become a true barista.
Visit our website LELIT.COM
A
H
K
L
J
M
N
O
B
C
D
E
I
F
G
background
10
LELIT Bianca - PL162T
7. Packing
The packaging of your coffee machine has been studied and produced to be
re-used. Use the original box and all the packaging elements in case you need
to send the machine back to your reseller or to an authorized service center, for
ordinary or extraordinary maintenance.
On our LELIT YouTube channel you can nd videos on how to pack the machine
properly, using the original box and packaging material. Please also consult your
LELIT reseller before shipping the machine away and follow his eventual spe-
cic instructions.
8. First start-up
8.38.1 8.2
FRONT
Attention. Remove the machine from its packing and follow the
instructions printed on the box.
Attention. The unit weighs 26.5 kg
Place the machine on a solid, at, and dry surface and make sure the appliance
is stable; if needed, screw/unscrew the feet to adjust the position of the machine.
Fill the water tank (2) with room temperature water up to the indicated maximum
level and insert it in its seating (Pic 8.1).
Note. The machine has been designed to be also connected directly to the
water mains (see accessories in the equipment box). For this type of connection,
we recommend contacting an authorized technician.
Attention. Make sure that the paddle (9) is positioned completely to the
right to allow the passage of the water. The group lever (13) has 2 functional
positions: completely up for open and completely down for closed. Make sure
that the group lever is completely down.
background
11
English
EN
Use the power cord (L) to connect the machine to the electrical mains and turn
ON the machine by pressing the ON/OFF switch (6) (Pic 8.2). Once the display
shows the LELIT logo, follow the instructions that appear on the LCC (7): lift the
group lever (13), wait for the countdown (30 seconds) to nish and return the
group lever (13) in its original position. Wait until the bar is fully loaded and “OK”
appears on the display (less than 24 minutes).
The hydraulic circuit will need maximum 4 minutes from the 1st turn on to get
lled with water.
Now the hydraulic circuit is lled up. The machine will start heating the water to
reach the pre-set values. This operation requires maximum 24 minutes.
Note. It may happen that the LCC (7) shows to ll the water tank again.
Follow the instruction to ll the hydraulic circuit correctly.
Once the water temperature has reached the pre-set values and the hydraulic
circuit is lled up, the LCC (7) will show the temperature inside the coffee boiler
and a coffee cup icon (Pic 8.3).
Attention. During the heating phase, a small quantity of water and steam will
drain in the tray (16). This is normal and conrms the machine correct functioning.
9. How to install the water filter
9.1
min
3
9.2 9.3
1
2
Attention. Before installing the water lter (M), follow the instruction for
the rst start-up of the machine. The hydraulic circuit must be lled up.
Before installing the water lter in the water tank, immerse the lter (M) in a jug
full of water for about 3 minutes to eliminate the air inside the lter that may
cause a machine disfunction (Pic 9.1).
background
12
LELIT Bianca - PL162T
Take out the water tank (2) and remove the black plastic support placed on the
bottom of the tank. Insert the lter (M) in the bigger hole of the support, remove the
charge tube from the small plastic lter and x it on the nozzle of the lter (Pic 9.2).
Re-place the support in its seating on the bottom of the tank (2), rinse the tank
carefully, ll it with water and insert the tank in its seating (Pic 9.3).
10. Espresso and coffee
10.1 10.2
1
2
10.3
Note. Even though the machine is immediately ready to dispense coffee,
it might take a few tries before getting the perfect cup of coffee.
Choose the coffee lter (A,B,C), insert it into the lterholder (F) and ll it with
adequate quantity of ground coffee. Use the tamper (J) to press the coffee
powder in the lterholder. Fix the lterholder into the brewing group (8) and make
sure the handle is aligned with padlock symbol present on the group (Pic 10.1).
Place the cup/s under the lerholder (F) and lift the group lever (13) to start
brewing (Pic 10.2).
Attention. Make sure that the paddle (9) is positioned completely to the
right to allow the passage of the water.
background
13
English
EN
10.4
OK
By turning the paddle (9), you can change the water
ow, hence the pressure, on the coffee to obtain the
desired extraction prole. The pressure value will
be shown on the manometer (11) (Pic 10.3).
Return the group lever (13) to its initial position to
stop the extraction (Pic 10.4).
Take out the lterholder (F) and empty the lter after
every coffee extraction.
Note. We suggest you leave the lterholder inserted into the brewing
group to help harmonize the temperature between the group and the lterholder
complete of the lter.
Attention. Do not remove or loosen the lterholder from the brewing
group during the coffee extraction to avoid burn risks caused by hot water leaks.
11. Steam and hot water
11.1
Steam. Open the steam knob (4) by turning it anti-
clockwise (Pic 11.1), with the steam wand (5) point-
ed on the drip tray (16), to drain the small quantity of
water.
When the steam comes out close the knob (4).
Place the milk jug, lled up to the beginning of the
spout, under the steam wand (5) and open again
the steam knob (4).
Once you have obtained the desired result, turn the
knob (4) clockwise to stop the function.
Attention. Clean the steam wand (5) after every use by pointing the
steam wand to the drip tray (16) and dispensing some steam. Thoroughly clean
the wand (5) with a sponge or clean cloth.
background
14
LELIT Bianca - PL162T
11.2
Hot water. Place a jug under the hot water wand
(12) and open the hot water knob (10) by turning it
anticlockwise (Pic 11.2).
Once you have obtained the desired result, turn the
knob (10) clockwise to stop the function.
Attention. Never place hands or other body parts under the steam (5) or
hot water (12) wand. Burn/Scald risks.
12. Reserve mode
12.1
The “Reserve mode” is activated when, during a
coffee extraction, the water in the water tank (2)
nishes and allows to complete the extraction in
progress.
The LCC display (7) shows the symbol of a water
tap with a water drop next to the extraction time
(Pic 12.1).The machine continues the coffee
extraction up to a maximum of 60 seconds from the
appearance of the symbol.
At the end of the extraction, the LCC display (7) shows the “missing water” symbol.
background
15
English
EN
13. LCC – LELIT Control Center
13.1 13.2 13.3
LCC, LELIT Control Center, (7) is the brain of LELIT coffee machines. It has an
elegant, graphic OLED display of the latest generation. It controls all the functions
of the machine and allows you to adjust the settings.
The LCC has pre-set default settings.
Read below to discover how to adjust them and download the extended guide to
fully understand how to match the settings to your needs.
13.4
3”
How to adjust the LCC settings.
1. Press the “-” button to enter the menu and
scroll through the menu (Pic 13.1).
2. Press the “+” button to change the setting, that
starts ashing (Pic 13.2).
3. Change its value and/or state by using the “-”
and “+” buttons (Pic 13.3).
4. 3 seconds after the last press of any button,
LCC stores the data and exits from the menu
(Pic 13.4).
1. Coffee boiler temperature
2. Steam boiler temperature
3. Steam boiler enabling/disabling
4. Temperature unit measure
5. Pre-infusion times
6. Low ow times
7. Sleepy mode enabling/disabling
8. Partial and total doses counter
background
16
LELIT Bianca - PL162T
14. Stand-by mode
14.1 14.2 14.3
30
min
OFF
After 30 minutes of inactivity, the machine will go automatically in stand-by
mode. The LCC display (7) and the heating element are disabled, and the
ON/OFF main switch (6) ashes each 3 seconds (Pic 14.1). To re-start the
machine, lift the group lever (Pic 14.2).
Wait until the LCC display (7) shows “OK” before using the machine again (Pic 14.3).
Note. The Stand-by function can be disabled. Check the extended guide.
15. Limestone prevention
To prevent limestone deposits and grant a better result in the cup, use the water
lter (M). The lter found in the equipment box has an autonomy tested for 70
liters of water.
Use the slides put on the handles of the water tank (2) to remember the com-
plete llings of the tank and replace the lter once exhausted.
Note. The water lter must be replaced every 28 complete llings, or after
max 4 months of use. If the machine remains unused for 1 month, the water lter
must be replaced with a new one.
background
17
English
EN
16. Warranty terms
LEGAL WARRANTY
The seller of this product, who is not the manufacturer, may provide a written
warranty for this product. Apart from any written warranty that the seller may
provide, this product is covered by warranty laws or guarantee laws valid in the
country where the product is sold. You may have additional rights under appli-
cable local law that are greater than those provided in any written warranty from
the seller. The seller is responsible for any service that may be provided as a
result of any written warranty.
Inside the European countries, and for products sold in those countries, the laws
that are in force are the national laws implementing EC Directive 44/99/CE.
For Australian consumers, this product comes with guarantees that cannot be
excluded under the Australian Consumer Law. You are entitled to a replace-
ment or refund for a major failure and compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
background
18
LELIT Bianca - PL162T
IMPORTANT INFORMATION
For the correct disposal of the product in accordance with EU
DIRECTIVE 2012/19/EC and with Legislative Decree no. 151
of 25 July 2005. At the end of its working life, the product must
not be disposed of as urban waste. It must be taken to a special
authorised differential waste collection centre or to a dealer
providing this service. Disposing of a household appliance
separately avoids possible negative consequences for the
environment and health caused by improper disposal and
enables recovery of the materials it contains, with signicant
savings in energy and resources. The product is marked with a
crossed-out wheelie bin as a reminder of the need to dispose of
household appliances separately.
EC DECLARATION OF CONFORMITY
LELIT srl a socio unico declares under its own responsibility
that the product: Coffee machine type: PL162T to which this
declaration relates conforms to the following standards:
EN 60335-2-15:2016 + A11:2018 + A1:2021 + A2:2021
+ A12:2021; EN 60335-1:2012 + AC:2014 + A11:2014
+ A13:2017 + A1:2019 + A14:2019 + A2:2019 + A15:2021;
EN 62233:2008; CISPR 14-1; CISPR 14-2; EN 61000-3-2;
EN 61000-3-3; EN 55014-1:2017; EN 55014-2:2015;
EN 50564:2011.
pursuant to directives:
2014/35/EC; 2011/65/EU; 1907/2006/EU
NB: This declaration is null and void should the machine be
modied without our specic authorisation.
Castegnato, 30/09/2022
Emanuele Epis - Legal Representative
background
19
English
EN
Notes
background
LELIT.COM
EN/7800070
©2022 LELIT srl
All Rights Reserved

Specifications

LELIT PESBN03PSS1BXX1 Questions and Answers

Questions and Answers

Related Products