1
ANC WIRELESS HEADPHONES
MODEL: HPBT420
INSTRUCTION MANUAL
PLEASE READ ALL INSTRUCTIONS CAREFULLY & RETAIN FOR FUTURE USE
2
Getting started
. Remove the product from the box.
. Remove any packaging from the product.
. Please retain all packaging after you have checked and counted all the parts
and the contents against the list.
. Please fully charge the earphone and charging case before first using.
Package Contents
Bluetooth Headphones
USB charging cable
Instruction Manual
Safety Rules
1. To ensure safety, please follow the rules mentioned in this manual. Before
using the Bluetooth earphone, we strongly recommend that you read this manual
carefully.
2. Please pay attention to the sharp edge, uneven surface, metal parts,
accessories and packaging.
3. Please do not open, dismantle or repair this product, this may lead to
fire, electronic breakdown or even completely damage the product, these are not
included in the warranty.
4. Do not wipe the product with oil and other volatile liquids.
5. Please do not use this product in the places where there is a potential
personal safety risk and danger.
3
Connect to your phone quickly
1. The first time to manually connect the phone
(1) Press and hold the power button for 3 seconds and click on the connection
setting on the phone, search for the device, select
“ 2BOOM-HPBT420”
to
connect.
Battery Case and charging
The Red light is flashing when charging, once fully charged the red light will be
off and stop charging.
Button Function definition
LONG PRESS 3 SECONDS TO TURN ON / OFF.
Short press for previous song
Long press for volume down
Short press for next song
Long press for volume up
To turn on the Active Noise Canceling mode, slide the ANC switch
button to the ON position when the headphones are ON.
The LED indicator light will turn GREEN.
Slide the ANC button to the OFF position to turn it off
4
(Note: Battery life & charging time may vary based on usage & types of devices used.)
FCC ID: 2AIDL-HPBT420
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference,and
(2)This device must accept any interference received,including interference that
may cause undesired operation.
Warming:Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Notes:This equipment has been tested and found to comply with the limits for a Class B digital
device,pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable
protection against harmful interference in a residential installation.This equipment
generates,uses and can radiate radio frequency energy and,if not installed and used in
accordance with the instructions,may cause harmful interference to radio
communications,However, there is no guarantee that interference will not occur in a particular
installation. if this equipment does cause harmful interference to radio or television
reception,which can be determined by turning the equipment off and on,the user is encouraged
to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
--Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure
limits,The device has been evaluated to meet general RF exposure requirement.
Migear International Group LLC,
21 W 38th Street, 14th Floor, NY, NY 10018 USA
TEL: 929-390-4504
