User Manual
Product Description: 915 MHz Kinetic RF Transmitter End-point
Model Number (HVIN): 50-31F036
Model Name (PMN): Kinetic Transmitter End-point
FCC ID: 2AHAB-KT
IC: 8725A-KT
Manufacturer: Camden Door Controls
Date of Issue: June 1, 2026
1. Product Overview
The Kinetic Transmitter is a 915 MHz RF transmitter using energy harvesting technology. The transmitter does not require any
batteries, providing a maintenance-free installation that operates on radio frequency to provide easy installation of automatic
door activation switches.
2. Package Contents
• 1 x Kinetic Transmitter
• 1 x User Manual
3. Installation & Setup
3.1 Powering the Device
The Kinetic Transmitter does not require any external power. It uses an energy harvesting magnetic coil. Physical force is
used to push a magnet across a coil, which generates enough energy to power a small RF generator.
3.2 Basic Operation
The Kinetic Transmitter End-point can be paired with Camden RF Receivers. Pairing is achieved by pressing the Pair
button on the receiver and then activating the Kinetic Transmitter End-point.
4. Wireless Operation
This product operates using Sub-GHz ISM-band radio communication. Radio operation is automatic and managed by the internal
rmware. Users cannot modify transmission parameters such as power level, frequency, or modulation.
5. Regulatory Notices
5.1 FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
Page 1 of 3
Kinetic Transmitter End-point
Kinetic Transmitter End-point
User Manual
Page 2 of 3
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation. Please note that changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Note: Any changes or modications not expressly approved by the party responsible for compliance could void the user’s
authority to operate this equipment.
5.2 FCC RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter
must not be co-located or operating in conjunction with any other antenna or transmitter. In order to avoid the possibility
of exceeding the FCC radio frequency exposure limits, this equipment should be installed and operated with minimum
distance 20 cm (7.9 inches) between the antenna and your body during normal operation. Users must follow the specic
operating instructions for satisfying RF exposure compliance.
5.3 ISED Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with the Canadian ICES-003 Class B specications. CAN ICES-003(B) / NMB-003 (B).
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils radio exempt de licence. L’exploitation est autorisée aux deux
conditions suivantes:
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
5.4 ISED RF Exposure Statement
This equipment complies with ISED RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20 cm (7.9 inches) between the radiator and any part of your body. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Cet équipement est conforme aux limites d’exposition aux radiations ISED CNR-102 établies pour un environnement non contrôlé.
Une distance de séparation d’au moins 20 cm doivent être maintenue entre l’antenne de cet appareil et toutes les personnes.
Lanceurs ou ne peuvent pas coexister cette antenne ou capteurs avec d’autres.
Kindetic Transmitter End-point
User Manual
Page 3 of 3
Call: 1.877.226.3369 / 905.366.3377
Visit: www.camdencontrols.com
Opening New Doors to
Innovation, Quality and Support!
File: Kinetic Transmitter End-point
Manual.indd
Revision: June 1, 2026
Part No.: 40-82B392
6. Certcation and Approvals
• FCC ID: 2AHAB-KT
• IC: 8725A-KT
• Complies with applicable FCC Part 15 and ISED RSS standards
7. Safety and Maintenance
• Do not disassemble or modify the product.
• Do not expose the device to water, re, or excessive heat.
• Only use supplied or certied accessories.
• Clean with a soft dry cloth only.
8. Support & Contact Information
For product support, warranty information, or replacement parts, please contact:
Camden Door Controls
2395 Skymark Ave, Mississauga, ON L4W 4Y6
Phone: (905) 366-3377
Email: [email protected]
Website: www.camdencontrols.com
