User Manual for
AI Health WatchPad
Body
Temperature
Tri-color light
Heart rate
blood oxygen PD
Appearance
Please read this manual carefully before using this product.
Charging Method
Place the product onto the charging dock and connect the charging
cable until the charging indicator light turns on.
Wearing Method
Wear the sma bracelet on your wrist and adjust the strap to a
comfoable length.
First peel off the adhesive backing of the product and stick it to the back of the
watch, then put the watch on your wrist and adjust it to a comfortable position.
Connection APP
Search and download the app, open and pair rings.
QRing
Température
corporelle
Voyant tricolore
Fréquence
cardiaque,
saturation en
oxygène du sang
Apparence
Veuillez lire attentivement ce manuel avant d'utiliser le produit.
Mode de chargement
Mode de port
Posez le produit sur la station de chargement et branchez le câble
de chargement jusqu'à l'allumage du voyant de charge.
Portez le bracelet connecté au poignet et réglez le bracelet à une
longueur confortable.
Décollez d'abord le papier adhésif du produit, collez-le au dos de la montre, puis
portez la montre au poignet et ajustez-la à une position confortable.
Connexion à l'application
Recherchez et téléchargez l'application, lancez-la puis associez le
bracelet.
QRing
Temperatura
corporea
Luce tricolore
Frequenza cardiaca,
saturazione
dell'ossigeno nel
sangue
Aspetto
Leggere attentamente questo manuale prima di utilizzare il prodotto.
Modalità di ricarica
Modalità di indossamento
Posizionare il prodotto sulla base di ricarica e collegare il cavo di
ricarica finché il led di ricarica non si accende.
Indossare il bracciale intelligente al polso e regolare il cinturino a
una lunghezza confortevole.
Staccare prima il supporto adesivo del prodotto, applicarlo sul retro dell’orologio,
poi indossare l’orologio al polso e regolarlo in posizione confortevole.
Connessione APP
Cercare e scaricare l’app, aprirla e associare il bracciale.
QRing
Temperatura
corporal
Luz tricolor
Frecuencia cardíaca,
saturación de
oxígeno en sangre
(PD)
Aspecto
Lea atentamente este manual antes de usar el producto.
Modo de carga
Forma de uso
Coloque el producto en la base de carga y conecte el cable de
carga hasta que se encienda el indicador de carga.
Use la pulsera inteligente en la muñeca y ajuste la correa a una
longitud cómoda.
Retire primero la lámina adhesiva del producto, péguela en la parte trasera del
reloj, luego póngase el reloj en la muñeca y ajústelo a una posición cómoda.
Conexión de la APP
Busque y descargue la APP, ábrala y sincronice la pulsera.
QRing
Körpertemperatur
Dreifarbige Leuchte
Herzfrequenz,
Blutsauersto
ffsättigung (PD)
Aussehen
Bitte lesen Sie dieses Handbuch vor der Verwendung des Produkts
sorgfältig durch.
Lademethode
Trageweise
Legen Sie das Produkt auf die Ladestation und schließen Sie das
Ladekabel an, bis die Ladeanzeige leuchtet.
Tragen Sie das Smart-Armband am Handgelenk und stellen Sie
das Band auf eine angenehme Länge ein.
Zuerst die Klebefolie des Produkts abziehen und auf die Rückseite der Uhr kleben,
dann die Uhr am Handgelenk anlegen und in eine angenehme Position einstellen.
APP-Verbindung
Suchen Sie die App, laden Sie sie herunter, öffnen Sie sie und
koppeln Sie das Armband.
QRing
体温
三色ライト
心拍数、
血中酸素濃度（PD）
外観
本製品をご使用になる前に、本取扱説明書をよくお読みください。
充電方法
装着方法
製品を充電スタンドに置き、充電ケーブルを接続し、充電表示ラ
イトが点灯するまで待ってください。
スマートブレスレットを手首に装着し、ベルトを快適な長さに調
整してください。
まず製品の裏面の粘着シートをはがし、時計の裏側に貼り付けてから、手首に装
着して快適な位置に調整してください。
APP 接続
APP を検索してダウンロードし、アプリを起動してブレスレット
をペアリングしてください。
QRing
体温
三色灯
心率、血氧PD
外观介绍
使用产品前请仔细阅读本说明书。
充电方法
佩戴方法
将产品放置在充电座上，并连接充电线，直到充电指示灯亮起。
将本产品贴在手表背面，在将手表佩戴至手腕上。
首先撕下产品背面的背胶，将其贴在手表背面，然后将手表佩戴在手腕上，并调整
至舒适的位置。
APP连接
搜索下载QRing，打开并配对本产品。
QRing
英 法 德
意 西 日 中
User Manual for
AI Health WatchPad
Federal Communications Commission (FCC) Statement.
This device complies with part 15 of the
FCC Rules. Operation is subject to the following two
conditions:
(1)
This device may not cause harmful interference, and
(2)
this device must accept
any interference received,
including interference that may cause undesired operation.
Note: This equipment has been
tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide Reasonable
protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the
user is encouraged to try to correct the interference by one or
more of·1
the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this device not expressly approved by
may void the FCC authorization to operate this device.Note: The manufacturer is not responsible
for any radio or TV interference caused by
unauthorized modifications to this equipment. Such
modifications could void the user’s authority
to operate the equipment.
RF
exposure
statement:
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled
environment.
The device is installed and operated without restriction.
