This operator’s manual contains handling tips and precautions for safe operation of your BAD BOY 2024H
/ 3026H tractor. Read it carefully before you operate your tractor and make sure that you have a full under-
standing of this manual. This will ensure correct operation and to keep the tractor optimum condition.
After reading the manual, keep it close to the tractor for immediate reference. When you loan your tractor to
someone else, loan the manual as well.
In case the manual is lost or damaged, please contact your local authorized dealer for a copy. Some parts of
this product may have been changed for the improvement of quality or for safety reasons, in which case the
photographs or drawings of the parts in this booklet may not be the same as the actual parts installed on this
product. If you nd anything in this manual unclear or need further explanation, please contact your autho-
rized dealer.
PREFACE
※
Regarding the purpose of this machine
Do not modify the machine or try to do the job which is beyond purpose of this machine. Otherwise it may cause the
warranty cancellation. (Refer to warranty statement for detail)
2024h_3026h.indb 12024h_3026h.indb 1 2020-09-18 오후 6:17:072020-09-18 오후 6:17:07
SECTION
2024h_3026h.indb 22024h_3026h.indb 2 2020-09-18 오후 6:17:072020-09-18 오후 6:17:07
FOR SAFE OPERATION
........................................................
REGARDING WARRANTY SUPPORT
.................................
SPECIFICATION
....................................................................
DESCRIPTION OF OPERATING SYSTEM
...........................
CONTROLS AND COMPONENTS
........................................
PERIODIC CHECKS AND MAINTENANCE
..........................
DIAGNOSIS AND TROUBLE SHOOTINGS
..........................
STORAGE AND DISPOSAL
..................................................
1
2
3
4
5
6
7
8
SECTION
TABLE OF CONTENTS
2024h_3026h.indb 32024h_3026h.indb 3 2020-09-18 오후 6:17:072020-09-18 오후 6:17:07
SAFETY AND VEHICLE DAMAGE WARNING
Failure to observe the instruction given with this mark may result in death or injury.
DANGER
NOTE
This instruction is to give an additional description to operator so that he/she can operate the
machine more eectively.
Read this Manual for correct and safe use of the product. Failure to use the product properly
may result in an accident. Keep this Manual close to the tractor after you have read it.
IMPORTANT
The instructions given with the following marks are very important for your safety.
WARNING
Failure to observe the instruction given with this mark may expose you to the risk of death
or injury.
Failure to observe the instruction given with this mark may expose you to injury.
• The section, “ To Ensure Safe Operation,” on the following pages details safety points to
be observed to ensure safe operation of your tractor.
• Please make sure you read it carefully before operating the tractor.
CAUTION
2024h_3026h.indb 42024h_3026h.indb 4 2020-09-18 오후 6:17:072020-09-18 오후 6:17:07
This manual includes symbol marks of the controller to simplify operations for maneuverability and mainte-
nance. These meanings are as below, so carefully read it for a proper function.
SYMBOL MARKS OF CONTROLLER
Left side indicator
High Beam
Preheat
Right side indicator Battery Engine oil pressure
2024h_3026h.indb 52024h_3026h.indb 5 2020-09-18 오후 6:17:082020-09-18 오후 6:17:08
"USE AND DISPOSAL" POLICY CONCERNED WITH ENVIRONMENT PRESERVATION
We try our best to preserve the environment and are always concerned about our environmental impact at
each step of planning, development, production, distribution, use and disposal of products, and for our over-
all operations through an “environmentally friendly” management system. We comply with international en-
vironmental regulations, environmental regulations designated by country and local authorities and other re-
quirements with which we are in agreement, and we work towards the prevention of environmental pollution
and the conservation of resources. We provide environmental education and have an awareness campaign
to raise environmental awareness among all our employees and members of the supporting companies.
We introduce the “Use and Disposal” policy concerned with environment preservation as follows.
1. Please read the operator’s manual thoroughly for global environment protection. Overload on the machine shortens
the product life and increases the harmful exhaust gas, which causes air pollution due to the incomplete combustion.
2. When replacing various uids (for engine, transmission, hydraulics, etc.) by yourself, don’t dispose the used oil to
anywhere not recommended. It can pollute the ground and water. Please contact your local dealer to dispose it legal-
ly.
3. Observe the operator’s manual and store or dispose the waste product properly. Rust, oil, etc. leaked from waste
product improperly stored can pollute the ground and water. Accordingly for a waste product disposal, contact the
necessarily “approved waste collection and recycling facility” to discard the used materials legally.
2024h_3026h.indb 62024h_3026h.indb 6 2020-09-18 오후 6:17:082020-09-18 오후 6:17:08
1
1. FOR SAFE OPERATION
SAFETY PRECAUTIONS .......................................................................1-2
BEFORE USING THE MACHINE ...............................................................................1-2
BEFORE WORKING ..................................................................................................1-11
WHILE WORKING .....................................................................................................1-16
AFTER USING THE MACHINE ................................................................................1-17
PRECAUTION FOR PROLONGED STORAGE ......................................................1-21
OTHER........................................................................................................................1-23
DECAL MOUNTING LOCATION .........................................................1-31
DECAL ....................................................................................................1-33
CAUTIONS FOR DECAL MAINTENANCE ..............................................................1-36
2024h_3026h.indb 12024h_3026h.indb 1 2020-09-18 오후 6:17:082020-09-18 오후 6:17:08
1
-
2
BAD BOY TRACTOR
SAFETY PRECAUTIONS
If the instructions in this chapter are
ignored, it may cause a machine fail-
ure, a fatal accident with injury or
death.
For further detailed information, refer
to each chapter.
BEFORE USING THE MACHINE
6015O102A
환기를충분히
6640O101A
Ventilating
Wide and at enough area;
•
Inspect or repair the tractor on
a wide and at area.
If this instruction is ignored, an
unexpected accident may occur,
such as overturning of the trac-
tor.
WARNING
•
Please understand that some
of the figures or contents in
this manual may not match
with your own machine due to
the product variation.
•
This tractor is not designed
for road driving. Please use a
truck to move this machine on
the public roads.
NOTE
Beware of exhaust gas;
•
Running the engine, repairing
(tightening) any painted part
or grinding any painted area
should be performed only in a
well-ventilated area.
If this instruction is ignored, the
exhaust gas or dust can cause
intoxication and lead to fatal
consequences.
WARNING
2024h_3026h.indb 22024h_3026h.indb 2 2020-09-18 오후 6:17:082020-09-18 오후 6:17:08
1
-
3
FOR SAFE OPRERATION
1
6015O103A 6015O104A
Carry out maintenance in a well-
lit place;
•
Make sure work area is prop-
erly lighted.
Use safety work lights with
protective covering when
working inside or under the
machine.
If this instruction is ignored, an
unexpected accident may occur,
possibly re or explosion.
WARNING
Clean and arranged place;
•
Do not mess the place by
dust, mud, oil, or parts
If this instruction is ignored, an
unexpected accident may occur.
WARNING
Prepare for emergencies;
•
Keep a rst aid kit and re ex-
tinguisher handy at all times
while operating machine.
WARNING
2024h_3026h.indb 32024h_3026h.indb 3 2020-09-18 오후 6:17:082020-09-18 오후 6:17:08
1
-
4
BAD BOY TRACTOR
6015O106A 6015O107A6015O105A
Do not drive if you are;
•
Unable to concentrate be-
cause of fatigue, under treat-
ment of medicine.
•
Under the inuence of alcohol
•
Pregnant
•
Under the age of 18
WARNING
Use only recommended imple-
ments;
•
Be sure to use only imple-
ments which are recommend-
ed by manufacturer.
If this instruction is ignored, an
unexpected accident may occur
or tractor may not perform prop-
erly.
WARNING
Wear properly for the job;
•
Hair band, loose clothing
is not allowed. Wear tight
clothes, work hat, and work
shoes which have rough bot-
toms against slippery surface.
If this instruction is ignored, you
will be exposed to a risk of be-
ing entangled, slipping, or fall-
ing.
WARNING
2024h_3026h.indb 42024h_3026h.indb 4 2020-09-18 오후 6:17:082020-09-18 오후 6:17:08
1
-
5
FOR SAFE OPRERATION
1
6015O108A 6015O109A 6015O110A
Pay attention to the shoulder of
the road;
•
When moving along the un-
paved road with ditches or
slanted sides, pay attention to
the shoulders.
If this instruction is ignored,
there is a risk of falling over.
Interlock the brake pedals (left
and right) when driving on a
road;
•
Make sure to interlock the
brake pedals (left and right)
when driving on a road
If this instruction is ignored,
there is a risk of abrupt turning
or overturning due to one-sided
braking.
Start the machine slowly after
reminding bystander;
•
Start the engine after remind-
ing bystanders of your inten-
sion. Do not start the machine
abruptly.
If this instruction is ignored, un-
expected accident or injury can
happen.
WARNING
WARNINGWARNING
2024h_3026h.indb 52024h_3026h.indb 5 2020-09-18 오후 6:17:092020-09-18 오후 6:17:09
1
-
6
BAD BOY TRACTOR
6015O112A6015O111A
6015O113A
Observe traffic regulations
when driving on a road safely;
•
If the machine is broke down
and stopped on the road,
move the machine to a safe
place out of the road.
If this instruction is ignored,
there is a risk of accident or in-
jury.
WARNING
Avoid rapid starting, braking,
turning, and excessive speed;
•
Start and stop the tractor
slowly. Reduce engine speed
when making a turn and driv-
ing on hilly or curved roads.
If this instruction is ignored,
there is a risk of overturning or
damage to the machine.
WARNING
Observe traffic regulations and
drive safely;
•
When driving on the road, ob-
serve the traffic regulations
and wear a hard hat and seat
belt.
If this instruction is ignored,
there is a risk of accident or in-
jury.
WARNING
2024h_3026h.indb 62024h_3026h.indb 6 2020-09-18 오후 6:17:102020-09-18 오후 6:17:10
1
-
7
FOR SAFE OPRERATION
1
6015O115A 6015O116A
Put machine shut down sign if the
machine is stopped on the road;
•
If the tractor is stopped on
the road due to the machine
failure, put the machine shut
down sign (Emergency trian-
gle reflex reflector) at least
100~200 yards before failed
machine in accordance with
local trac laws.
If this instruction is ignored, the
machine can be hit by a car and
cause a trac accident with in-
jury or death.
WARNING
Only driver should be aboard
the tractor while in operation;
•
This tractor is designed to al-
low only one operator. The
driver must not allow anyone
else to get on the tractor.
•
Especially never allow chil-
dren on the machine while in
use.
If this instruction is ignored, an
unexpected accident may occur.
WARNING
Do not allow anyone near while
operating the tractor or imple-
ment;
•
When engaging or disengag-
ing the implement by moving
the tractor, make sure that no
one is around the tractor or
between the implement and
the tractor.
[If this instruction is ignored,
there is a risk of accident or in-
jury.
WARNING
100m이상
6640O114A
100m or more
2024h_3026h.indb 72024h_3026h.indb 7 2020-09-18 오후 6:17:102020-09-18 오후 6:17:10
1
-
8
BAD BOY TRACTOR
6015O117A 6015O119A
사용전에
잘읽는다.
설명서
6640O118A
Read manual
before drive
Operator
manual
Use Pesticides safely;
•
Careless use of agricultur-
al chemicals such as disinfec-
tants, herbicide, pesticides,
rat poison, and fertilizer can
be harmful to environment
and human body. Be sure to
observe all relevant regulation
and instructions to use the ag-
ricultural chemicals efficient-
ly and safely. Then it may pre-
vent injury or accident.
WARNING
Properly train anyone operating;
•
Explain the handling tips in
detail and make sure the driv-
er reads the Manual before
driving.
If this instruction is ignored,
there is a risk of death, serious
injury, or damage to tractor.
WARNING
Precautions for children;
•
Fully warn the children and
keep them away from the trac-
tor at all times.
If this instruction is ignored, un-
expected accident of injury can
happen.
WARNING
2024h_3026h.indb 82024h_3026h.indb 8 2020-09-18 오후 6:17:102020-09-18 오후 6:17:10
1
-
9
FOR SAFE OPRERATION
1
6015O120A 6015O121A
Observe all relevant regulations
for disposal;
•
Be sure to observe all relevant
regulations when you dispose
of the engine oil, transmission
oil, fuel, coolant, filters and
battery.
•
Never dispose the used oil di-
rectly to the river or drainage,
follow legal procedures.
WARNING
No smoking or open ame when
fueling;
•
Do not smoke or use match or
lighter while refueling.
If this instruction is ignored, fuel
can catch re and lead to explo-
sion or fatal injury with burn.
WARNING
Observe all relevant regulations
for disposal;
•
Careless disposal of waste
product can be harmful to en-
vironment and ecosystem.
•
When draining the fuel and oil,
use a proper container that is
not leaking, not food or bev-
erage containers to prevent
from drinking. Do not bury the
waste product in the ground
or dispose to drainage.
WARNING
2024h_3026h.indb 92024h_3026h.indb 9 2020-09-18 오후 6:17:102020-09-18 오후 6:17:10
1
-
10
BAD BOY TRACTOR
연료가
새고있어요
6640O122A
3
1
:
폭,길이
강도는
여유를...
6640O123A
Fuel is
leaking!
Sucient
Strength,
length and
width...!
실을때(후진)
내릴때(전진)
6640O124A
Loading
(backward)
Loading
(forward)
Inspect for fuel leaking;
•
Check the fuel lines and hos-
es for damage or leakage
If this instruction is ignored,
there is a risk of re.
WARNING
Consider the strength, length
and width of loading ramps be-
fore using;
•
Loading or unloading must be
done on a at and safe place,
the tractor engine switched
o, and the parking brake en-
gaged. The loading ramps
must be non-slip and have
sucient strength, length, and
width for the tractor.
If this instruction is ignored, the
tractor may roll backwards or fall
o causing accident or injury.
WARNING
Move the tractor backward when
loading, and forward when un-
loading;
•
Move the tractor backward
when loading it on the truck,
and forward when unloading
from the truck.
If this instruction is ignored, the
tractor may roll or fall o caus-
ing accident or Injury.
WARNING
2024h_3026h.indb 102024h_3026h.indb 10 2020-09-18 오후 6:17:112020-09-18 오후 6:17:11
1
-
11
FOR SAFE OPRERATION
1
BEFORE WORKING
6015O125A 6015O126A 6015O127A
Stop the engine before mainte-
nance;
•
Stop the engine before mainte-
nance when checking, repair-
ing or cleaning the machine.
If this instruction is ignored,
there is a risk of injury.
CAUTION
Do not shift gears on slopes or
on the loading ramps;
•
When driving on slopes or
on loading ramps, select the
proper shift gear before ap-
proaching the loading ramps
and then do not shift the gear
on the loading ramps.
If this instruction is ignored,
there is a risk of slipping, roll-
ing, or overturning.
WARNING
Be careful when driving on the
loading ramps;
•
Be careful when driving on the
loading ramps. Do not disen-
gage the clutch, shift the main
shift, range shift, or forward/
reverse lever.
If this instruction is ignored, the
tractor may roll backwards or
fall causing accident or injury.
WARNING
2024h_3026h.indb 112024h_3026h.indb 11 2020-09-18 오후 6:17:112020-09-18 오후 6:17:11
1
-
12
BAD BOY TRACTOR
6015O130A6015O129A6015O128A
Stop and cool down the engine
before fueling or lubricating;
•
Do not fill the fuel while the
engine is running or machine
is hot.
If this instruction is ignored, fuel
can catch re or lead to fatal in-
jury with burn.
DANGER
No re or spark near to the bat-
tery;
•
No fire or spark near to the
battery while checking and
charging the battery.
If this instruction is ignored, the
battery can cause a blaze or ex-
plosion and lead to a fatal injury
or death.
DANGER
Remove dirt and debris from
muer and engine before oper-
ating;
•
Clean if there is dust, debris
or fuel on the engine or muf-
fler before operating the ma-
chine every day.
If this instruction is ignored,
there is a risk of re.
DANGER
2024h_3026h.indb 122024h_3026h.indb 12 2020-09-18 오후 6:17:112020-09-18 오후 6:17:11
1
-
13
FOR SAFE OPRERATION
1
6015O131A
공구는
올바르게!
6640O133A
Use a cor-
rect tool
최대공기압이상
으로공기를넣지
마십시오.
6640O132A
Do not inate the
tire bead max air
pressure
Use correct tools;
•
Use proper tools to carry out
all maintenance procedure.
Also have available the re-
quired tools in the tractor at
all times.
If this instruction is ignored,
there is a risk of accident due to
poor maintenance.
CAUTION
Check electrical component and
wire harness;
•
Check before work if the wire
harnesses are burned or stuck
on any other component, if the
cord cover is peeled off or if
the wire connectors are loose.
If this instruction is ignored, the
electrical short can cause fire
and injury.
WARNING
Do not over inate tires;
•
When filling tires with air, do
not inate it beyond the max-
imum pressure stated in this
manual. (Refer to P5-22 of
Proper ination pressure)
If this instruction is ignored, the
tire may blow out, causing an
injury.
CAUTION
2024h_3026h.indb 132024h_3026h.indb 13 2020-09-18 오후 6:17:122020-09-18 오후 6:17:12
1
-
14
BAD BOY TRACTOR
6015O136A6015O135A
앗!
6640O134A
Oops!
It is necessary to inspect the
brake and steering wheel;
•
Check if the brakes work prop-
erly and evenly on both sides
or if the steering wheel is
loose.
If this instruction is ignored,
there is a risk of accident.
WARNING
Secure hood and side covers
before operating tractor;
•
After detaching the covers
for checking or maintenance,
make sure to put them back in
their place.
If this instruction is ignored,
there is a risk that you may get
entangled in the tractor or get
injured.
CAUTION
Observe correct procedures
when installing or removing the
battery;
•
Connect the (+) terminal first
when installing the battery,
and disconnect the (-) terminal
rst when removing it.
If this instruction is ignored,
there is a risk of burn or re due
to short circuit.
CAUTION
2024h_3026h.indb 142024h_3026h.indb 14 2020-09-18 오후 6:17:122020-09-18 오후 6:17:12
1
-
15
FOR SAFE OPRERATION
1
6015O137A 6015O138A
확실한점검을
6640O139A
Good Main-
tenance!
Avoid contact with the battery
solution;
•
Be careful that your body or
your clothes do not come in
contact with the battery solu-
tion. If it contacts your skin,
wash immediately with water.
If this instruction is ignored, it
can burn your skin or clothes.
DANGER
Be sure to check before and af-
ter using machine;
•
Be sure to check the machine
before and after using. Espe-
cially inspect and repair con-
trols such as clutch, brake, le-
ver, etc.
If this instruction is ignored, the
machine can be broken or lead
to an accident or injury.
WARNING
Lock tilt lever and telescopic
knob when adjusting steering
wheel;
•
Except when you adjust the
steering wheel, make sure that
the tilt lever and telescopic
knob are secured in the "No"
and "Lock" positions.
If this instruction is ignored, the
tractor may not turn properly,
causing an accident.
WARNING
2024h_3026h.indb 152024h_3026h.indb 15 2020-09-18 오후 6:17:122020-09-18 오후 6:17:12
1
-
16
BAD BOY TRACTOR
WHILE WORKING
6015O142A6015O141A
6015O140A
Use the loading ramps when
crossing a ditch or a dike;
•
Be sure to use the loading
ramps when crossing a ditch
or dike, or when passing
through soft land. The load-
ing ramps must be suitable for
the tractor in width, length and
strength.
If this instruction is ignored,
there is a risk of accident that
the tractor may slip or turn over.
WARNING
Properly ventilate when working
in a green house;
•
Ventilate the green house to
let out the exhaust gas.
If this instruction is ignored, the
exhaust gas can cause intoxi-
cation and lead to fatal conse-
quences.
WARNING
Pay attention and keep hands
on the steering wheel while driv-
ing;
If this instruction is ignored,
there is a risk of accident or in-
jury.
WARNING
2024h_3026h.indb 162024h_3026h.indb 16 2020-09-18 오후 6:17:122020-09-18 오후 6:17:12
1
-
17
FOR SAFE OPRERATION
1
AFTER USING THE MACHINE
6015O143A 6015O145A6015O144A
Do not allow anyone near while
operating the tractor or imple-
ment;
•
When engaging or disengag-
ing the implement by moving
the tractor, make sure that no
one is around the tractor or
between the implement and
the tractor.
If this instruction is ignored,
there is a risk of accident or in-
jury.
WARNING
Stop the engine when removing
grass, etc. from blades of the
cultivator;
•
Stop the engine when remov-
ing grass, etc. from blades
of the cultivator and lock the
ow control valve not to lower
the implement.
If this instruction is ignored,
there is a risk that you will get
entangled in the cultivator or
sustain a serious injury due to
lowering the implement.
WARNING
Perform the maintenance on a
level and safe location;
•
Perform the maintenance on a
level and safe location that will
keep the tractor in place and
will not cause a risk to peo-
ple passing by. Before carry-
ing out the maintenance, place
blocks at the front and rear
tires to prevent movement.
If this instruction is ignored, an
unexpected accident may occur,
such as overturning of the tractor.
WARNING
2024h_3026h.indb 172024h_3026h.indb 17 2020-09-18 오후 6:17:132020-09-18 오후 6:17:13
1
-
18
BAD BOY TRACTOR
6015O148A
6015O146A
닿
으
면
안
돼
앗뜨거!
공
구
함
6640O147A
It's HOT
Don't touch!
Cover the PTO shaft when not in
use;
•
When the PTO shaft is not in
use, apply grease and keep it
covered.
If this instruction is ignored,
there is a risk that you may get
entangled or get injured. Imple-
ment shaft installation on the
PTO shaft will not be easy due
to the rust on it.
CAUTION
Carry out maintenance after the
parts have cooled down;
•
Carry out the maintenance
work after the heated area
such as the muer or the en-
gine is fully cooled down.
If this instruction is ignored,
there is a risk of getting burnt.
CAUTION
Stop and cool down the engine
before fueling or lubricating;
•
Do not fill the fuel while the
engine is running or machine
is hot.
If this instruction is ignored, fuel
can catch re or lead to fatal in-
jury with severe burns.
CAUTION
2024h_3026h.indb 182024h_3026h.indb 18 2020-09-18 오후 6:17:132020-09-18 오후 6:17:13
1
-
19
FOR SAFE OPRERATION
1
6015O149A 6015O151A
Stop the engine before mainte-
nance;
•
Stop the engine before main-
tenance such as checking, re-
pairing or cleaning the ma-
chine.
If this instruction is ignored,
there is a risk of injury.
CAUTION
Be careful of high oil pressure;
•
Make sure that the hydrau-
lic coupling or the hose is not
loose or damaged. Before sep-
arating the hydraulic coupling
or the hose, eliminate the high
pressure inside the hydraulic
system by moving the control
lever while engine is stopped.
If this instruction is ignored, the
oil under high pressure may
cause skin injury.
CAUTION
Make sure that you are seated in
the driver’s seat with your seat
belt fastened before starting en-
gine;
•
When starting the engine,
make sure that you are seated
in the driver’s seat with your
seat belt fastened and check
the seat position and the safe-
ty of the tractor.
If this instruction is ignored, an
unexpected accident may occur.
WARNING
부
르
르
6640O150A
Brrr
2024h_3026h.indb 192024h_3026h.indb 19 2020-09-18 오후 6:17:132020-09-18 오후 6:17:13
1
-
20
BAD BOY TRACTOR
6015O154A6015O153A6015O152A
Put tractor rain cover on only af-
ter tractor has cooled down;
•
Put tractor rain cover on only
after parts such as the engine
and muer have cooled down.
If this instruction is ignored,
there is a risk of re.
WARNING
Do not open the radiator cap
when the radiator is hot;
•
Never open the radiator cap
when the radiator is heated.
If this instruction is ignored, hot
water may spurt, causing burns
or damage.
WARNING
Remove dirt and debris from
muer and engine before oper-
ating;
•
Clean if there is dust, debris
or fuel on the engine or muf-
fler before operating the ma-
chine every day.
If this instruction is ignored,
there is a risk of re.
WARNING
2024h_3026h.indb 202024h_3026h.indb 20 2020-09-18 오후 6:17:142020-09-18 오후 6:17:14
1
-
21
FOR SAFE OPRERATION
1
닿
으
면
안
돼
앗뜨거!
공
구
함
6640O155A
It's HOT
Don't touch!
Be careful of hot muer;
•
During operation and right af-
ter the engine is turned off,
the muffler is very hot. Avoid
touching it.
If this instruction is ignored, you
may get burnt.
CAUTION
PRECAUTION FOR PROLONGED STORAGE
6015O157A6015O156A
Disengage the clutch when stor-
ing the tractor for a long time;
•
When storing the tractor for a
long period of time, make sure
to put the clutch pedal in the
disengaging position.
If this instruction is ignored, the
clutch disc can be stuck to the
y wheel after long period time.
CAUTION
After working, immediately re-
pair if necessary;
•
Immediately repair or replace
the faulty parts.
- Tighten the loose bolt and
nut right away.
If this instruction is ignored, an
unexpected accident may occur
due to poor maintenance.
CAUTION
2024h_3026h.indb 212024h_3026h.indb 21 2020-09-18 오후 6:17:142020-09-18 오후 6:17:14
1
-
22
BAD BOY TRACTOR
6015O160A
취부는+
떼어낼떼는-부터!
어느쪽도
좋아!
6640O159A
Be Careful
connect + rst
connect + later
when connecting
Disconnect the Battery and the
key when storing the tractor for
a long period of time;
•
When storing the tractor with-
out use for a long period of
time, park the machine on the
leveled ground and clean each
component, remove the bat-
tery and keep the key in a safe
place.
If this instruction is ignored, bat-
tery power may be weakened
and starting will be failed.
WARNING
Observe correct procedures
when installing or removing the
battery;
•
Connect the (+) terminal first
when installing the battery,
and disconnect the (-) terminal
rst when removing it.
If this instruction is ignored,
there is a risk of burn or re due
to short circuit.
CAUTION
Confirm that the implement is
down on the ground when start-
ing the engine;
•
When starting the engine, con-
firm that the control lever is
on "Lowest" position.
If this instruction is ignored, im-
plement may come down sud-
denly and cause an injury.
WARNING
와
는
떼어내서보관하세요.
6640O158A
Remove from
tractor
2024h_3026h.indb 222024h_3026h.indb 22 2020-09-18 오후 6:17:152020-09-18 오후 6:17:15
1
-
23
FOR SAFE OPRERATION
1
확실한점검을
6640O161A
Good Main-
tenance!
Maintenance periodically;
•
After using tractor, visit your
local dealer for maintenance,
such as oil change and lters.
- Contact the local dealer to
discard the parts (battery,
etc.) or waste materials.
If this instruction is ignored,
there is a risk of accident due to
poor maintenance.
WARNING
OTHER
개조금지
6640O162A
Don't modify!
Do not adjust or repair following
components. Consult your local
BAD BOY dealer for these re-
pair;
•
Injection capacity and tim-
ing of the engine fuel injection
pump.
•
Correction and repair of hy-
draulic system (safety valve,
hydraulic pump, brake valve,
PST cylinder, SCV valve).
There is a risk of accident or in-
jury or machinery breakdown.
Remember it may cause the
warranty cancellation.
If this instruction is ignored, con-
sult your local BAD BOY dealer
for those repair and adjustment.
WARNING
Do not modify the tractor;
•
Use only the genuine parts or
other approved parts. Do not
modify the tractor.
If this instruction is ignored,
there is a risk of accident or in-
jury or machinery breakdown.
Remember it may cause the
warranty cancellation.
CAUTION
2024h_3026h.indb 232024h_3026h.indb 23 2020-09-18 오후 6:17:152020-09-18 오후 6:17:15
1
-
24
BAD BOY TRACTOR
6015O163A 6015O164A
블레이크를
연결시켜요.
6640O165A
Con-
nect
brake
Pay attention when turning with
implement;
•
Depending on implements, the
overall length may become
very long. Pay particular atten-
tion to people or objects near-
by when making a turn.
If this instruction is ignored,
there is a risk of person injury
or a collision of the implement.
WARNING
Use caution sign when towing a
trailer;
•
Link the brake of the trailer
with the brake of the tractor.
Do not shift gears when driv-
ing on a hill.
If this instruction is ignored,
there is a risk of accident or in-
jury.
WARNING
Move wheels to widest setting
(width between left and right
tires) when working slope or
when towing;
If this instruction is ignored,
there is a risk of turning over.
WARNING
2024h_3026h.indb 242024h_3026h.indb 24 2020-09-18 오후 6:17:152020-09-18 오후 6:17:15
1
-
25
FOR SAFE OPRERATION
1
6015O166A
Follow the instruction manual
when engaging an implement;
•
When engaging an implement
to the tractor, follow the in-
struction manual for the im-
plement.
If this instruction is ignored,
t
here is a risk of personal injury
or damage to the tractor.
WARNING
6015O168A6015O167A
Pay attention to the balance be-
tween the front and rear side
during the front-end-loader op-
eration;
•
During the front-end-load-
er operation, apply weights
or implement to avoid loosing
balance between the front and
the rear side of tractor.
If this instruction is ignored,
there is a risk of overturning ac-
cident due to loss of balance.
WARNING
Balance a heavy implement with
weights;
•
When engaging a heavy imple-
ment, load the weights on the
front of tractor to keep the bal-
ance of the tractor.
If this instruction is ignored,
there is a risk of accident or in-
jury due to loss of balance.
WARNING
2024h_3026h.indb 252024h_3026h.indb 25 2020-09-18 오후 6:17:162020-09-18 오후 6:17:16
1
-
26
BAD BOY TRACTOR
6015O169A 6015O171A6015O170A
Do not get under or put your
feet under the implement;
•
Do not get under or put your
feet under the implement.
If this instruction is ignored, the
implement unit may fall down
and there is a risk of injury.
WARNING
Do not substitute balance
weights with a person or any-
thing else;
•
Do not use a person or any-
thing else in place of the bal-
ance weight. Use only genuine
balance weight.
If this instruction is ignored,
there is a risk of accident or in-
jury.
WARNING
Be careful of unexpected move-
ment when using the rotary til-
ler;
•
When working with the rota-
ry tiller, put the tiller slowly on
soft or rocky ground. The trac-
tor may be pushed in an unex-
pected direction by the rotat-
ing force of the tiller.
If this instruction is ignored,
there is a risk of accident or in-
jury.
WARNING
2024h_3026h.indb 262024h_3026h.indb 26 2020-09-18 오후 6:17:162020-09-18 오후 6:17:16
1
-
27
FOR SAFE OPRERATION
1
6015O172A
Properly secure tractor during
transport;
•
When transporting the tractor,
apply the parking brake with
gear engaged and fasten the
tractor to the truck securely
using ropes or belts with su-
cient strength.
If this instruction is ignored,
There is a risk of accident that
the tractor may fall o the truck.
WARNING
6015O173A 6015O174A
Interlock the brake pedals for
both sides when loading or un-
loading the tractor;
•
It is necessary to interlock the
brake pedals for both sides
when loading or unloading the
tractor.
If this instruction is ignored, the
tractor may overturn due to one-
sided braking when the brake
pedal is depressed in an emer-
gency.
DANGER
Release the differential gear
lock when making a turn;
•
Make sure to release the dif-
ferential gear lock when mak-
ing a turn.
If this instruction is ignored, the
tractor may not turn to the in-
tended direction and cause an
accident.
WARNING
2024h_3026h.indb 272024h_3026h.indb 27 2020-09-18 오후 6:17:162020-09-18 오후 6:17:16
1
-
28
BAD BOY TRACTOR
6015O176A 6015O177A
드로바를
사용하세요.
6640O175A
Use drawbar
Pay attention to the shoulder of
the road;
•
When moving along the un-
paved road with ditches or
slanted sides, pay attention to
the road shoulder.
If this instruction is ignored,
there is a risk of falling over.
WARNING
Use the drawbar when towing;
•
Make sure to use the drawbar
when towing. Never tow any-
thing with the top link or the
lower links.
If this instruction is ignored, the
tractor may turn over.
WARNING
Be careful when driving on a
hill;
•
Be careful when driving on
a hill. Do not disengage the
clutch on the hill. Do not shift
the main shift lever, range
shift lever, or shuttle lever in
[neutral] on the hill.
If this instruction is ignored, the
tractor may roll backwards or
fall causing accident or injury.
WARNING
2024h_3026h.indb 282024h_3026h.indb 28 2020-09-18 오후 6:17:162020-09-18 오후 6:17:16
1
-
29
FOR SAFE OPRERATION
1
6015O178A
Turn off engine in a level area
when leaving the tractor;
•
When leaving the tractor, park
the tractor on a level and safe
area, turn off the engine, and
apply the parking brake. Also,
lower the implement on the
ground.
If this instruction is ignored, the
tractor may move and cause an
accident.
WARNING
6015O179A
Remove spilled excess fuel after
closing the fuel cap;
•
After lling the fuel tank, close
the fuel filler cap complete-
ly and wipe o the excess fuel
thoroughly.
If this instruction is ignored,
there is a risk of re.
WARNING
6015O181A
Be aware of the PTO RPM re-
quirements for the implements;
If this instruction is ignored,
there is a risk of accident or in-
jury.
WARNING
2024h_3026h.indb 292024h_3026h.indb 29 2020-09-18 오후 6:17:172020-09-18 오후 6:17:17
1
-
30
BAD BOY TRACTOR
6015O183A6015O182A
CAUTION
Engage the parking brake dur-
ing warming up the engine;
If this instruction is ignored, the
tractor may move and cause an
accident or injury.
Only engage or disengage im-
plements on at, level area:
•
Engage or disengage the im-
plement on a flat and safe
place. Supply proper light-
ing at all times and especially
night.
[Otherwise]
There is a danger of accident.
WARNING
2024h_3026h.indb 302024h_3026h.indb 30 2020-09-18 오후 6:17:172020-09-18 오후 6:17:17
1
-
31
FOR SAFE OPERATION
1
DECAL MOUNTING LOCATION
7,8
2,3
1
5,6
4
2024h_3026h.indb 312024h_3026h.indb 31 2020-09-18 오후 6:17:172020-09-18 오후 6:17:17
1
-
32
BAD BOY TRACTOR
12
11
10
9
2024h_3026h.indb 322024h_3026h.indb 32 2020-09-18 오후 6:17:172020-09-18 오후 6:17:17
1
-
33
FOR SAFE OPERATION
1
DECAL
(4) No.: TA00040603A
[MEC. Model]
(1) No.: TZE4190000B4 (3) No.: TZE5110000B4(2) No.: TZE5130000B4
FDXWLRQ
DIESEL ONLY
TZE4190000B4
Start only from
seat in park or
neutral.
Starting in gear
kits.
DANGER
TZE5110000B4
Breathing deiesel engin exhaust exposes you to chemicals known
to the state of Calfnrnia to casues cancer and birth defects or other
reproductive harm
TA00059067A
ZDUQLQJ
Alwasys start and operate th engine in a well-ventilated area.
If in an enclosed area, vent the exhaust to the outside.
Do not modify or tamper with the exhaust system.
DO not idle the engine except as necessary.
For more information go to www.P65warnings.ca.gov/diesel.
Cancer and Reporductive Harm-
www.P65Warnings.ca.gov.
ZDUQLQJ
FDXWLRQ
TZE5130000B4
2024h_3026h.indb 332024h_3026h.indb 33 2020-09-18 오후 6:17:182020-09-18 오후 6:17:18
1
-
34
BAD BOY TRACTOR
(5) No.: TA00016517A (6) No.: TA00016518A (7) No.: NTE5210000C4
(8) No.: NTE5150000C4 (9) No.:
TZE5170000B3
BEFORE DISMOUNTING TRACTOR:
1. PARK ON LEVEL GROUND WHENEVER POSSIBLE.
If parking on a gradient. position tractor at right angles
to the slope.
2. ALWAYS SET PARKING BRAKE.
Leaving transmission in gear with the engine stopped will
not prevent tractor from rolling.
3. LOWER ALL IMPLEMENTS TO THE GROUND.
Failure to comply to this warning may allow the wheels to
slip. and could cause injury or death.
4. LOCK SHUTTLE SHIFT LEVER IN NEUTRAL
POSITION AND STOP THE ENGINE.
TA00016517A
WARNING
TO AVOID PERSONAL INJURY:
1. Read and understand the operator’s manual before operation
2. Before starting the engine, make sure that everyone is at a safe distance from the
tractor and that the PTO is OFF
3. Do not allow passengers on the tractor at any time.
4. Before allowing ohterpeople to use the tractor, have them read the operator’s manual.
5. Check the tightness of all nuts and bolts regularly.
6. Keep all shields in place and stay away from all moving parts.
7. Lock the two brake pedals together before driving on the road.
8. Slow down for turns, or rough roads, or when applying individual brakes.
9. On public roads use SMV emblem and hazard lights, if required by local traffic and
safety regulations.
10. Pull only from the drawbar.
11. Before dismounting lower the implement, set the parking brake, stop the engine and
remove the key.
TA00016518A
F#D#X#W#L#R#Q
ZDUQLQJ
NTE5210000C4
DEATH OR INJURY MAY
RESULT IF THE TRACTOR
ROLLS OVER WITH THE
ROPS IN THE FOLDED
DOWN POSITION.
OPERATE THIS TRACTOR
WITH THE ROPS FOLDED
DOWN ONLY WHEN
NECESSARY.
ZDUQLQJ
Use seat belt
NTE5150000C4
TO AVOID PERSONAL INJURY OR DEATH FROM ROLL-OVER;
TZE5170000B3
1. BAD BOY recommends the use of a Roll-Over Protective
Structures(ROPS) and seat belt in almost all applications
2. Remove the ROPS only when it substantially interferes with
operation or itself presents a safety risk. (Examples include work
in orchards and vineyards.) ALWAYS REINSTALL IT BEFORE
USING THE TRACTOR IN OTHER APPLICATIONS.
3. Never use just the seat belt or just the ROPS. They must be
used together. For further details, consult your Operator’s Manual
or your local dealer.
ZDUQLQJ
2024h_3026h.indb 342024h_3026h.indb 34 2020-09-18 오후 6:17:192020-09-18 오후 6:17:19
1
-
35
FOR SAFE OPERATION
1
(10) No.:
TZE5180000C4
(11) No.:
NTE5220000C4
(12) No.: TZE4300000B4
ZDUQLQJ
This structure’s
protective capability
may be impaired
by structural
damage, overturn,
or alteration.
If any of these
conditions occur,
the structure
must be replaced.
NTE5220000C4
ZDUQLQJ
WARNING
TO AVOID PERSONAL INJURY:
1. Keep PTO shield in place at all times.
2. Do not operate the PTO at speeds faster
than the speed recommended by the
implement manufacturer
3. For towing PTO-driven implements set
drawbar at towing position.
(see operator’s manual)
4. Keep hands, feet and clothing away.
TZE4300000B4
2024h_3026h.indb 352024h_3026h.indb 35 2020-09-18 오후 6:17:192020-09-18 오후 6:17:19
1
-
36
BAD BOY TRACTOR
CAUTIONS FOR DECAL MAINTENANCE
Safety decals are attached to the
tractor for safe operation. Make sure
to follow the instruction on the decals
as well as the following instruction:
CAUTION
•
Keep the decals clean and intact.
If any decal is dirty, wash it with
soap and dry with a soft cloth.
•
Never use a solvent such a thin-
ner or acetone, since it can ruin
the decals.
•
Do not spray high-pressure wa-
ter directly onto the decal. The
decal may fall o the tractor.
IMPORTANT
•
If a decal is damaged or lost,
contact your local BAD BOY
dealer immediately to install a
new decal.
•
Make sure to attach the decal
in the correct position cleanly
without bubbles after cleaning
its mounting surface.
•
If a decal is attached to a com-
ponent to be replaced, replace
the decal as well.
2024h_3026h.indb 362024h_3026h.indb 36 2020-09-18 오후 6:17:192020-09-18 오후 6:17:19
2
2. REGARDING WARRANTY SUPPORT
REGARDING WARRANTY CERTIFICATE ...........................................2-2
REGARDING AFTER-SALES SERVICE ..............................................2-2
VEHICLE IDENTIFICATION NUMBER (VIN) ............................................................2-2
REGARDING SUPPLYING SERVICE PARTS ......................................2-3
REGARDING GENUINE PARTS AND FLUID ................................................ 2-3
2024h_3026h.indb 12024h_3026h.indb 1 2020-09-18 오후 6:17:192020-09-18 오후 6:17:19
2
-
2
BAD BOY TRACTOR
REGARDING WARRANTY
CERTIFICATE
REGARDING AFTER-SALES SERVICE
VEHICLE IDENTIFICATION NUMBER (VIN)
PRODUCTION SERIAL NUMBER
(1) Model And Production Serial Number (1) Engine Serial Number
•
Do not modify the machine. If
it is damaged by unapproved
modification and misuse
against description of manu-
al, it will not be covered under
warranty.
WARNING
ENGINE SERIAL NUMBER
The engine number is stamped on
the cylinder block and is specified
on the decal which is attached to the
cylinder block on the left side of the
engine. Also, the decal indicating the
engine model and standards is at-
tached on the top of the engine cylin-
der head cover.
The manufacturer's serial number is
marked on the serial number decal
which is attached to the front right
side of the front axle bracket.
2024h_3026h.indb 22024h_3026h.indb 2 2020-09-18 오후 6:17:192020-09-18 오후 6:17:19
2
-
3
REGARDING WARRANTY SUPPORT
2
▶
REGARDING AFTER-SALES SERVICE
If you have a problem on your ma-
chine, refer to "Troubleshooting" of
chapter 7 to check by yourself. Or
contact immediately to authorized
BAD BOY dealer nearby.
▶
BE PREPARE FOR THE FOLLOW-
ING QUESTION BEFORE CALLING
• Model and product serial number
• In case of engine failure, engine
serial number
• Working conditions (What kind of
job and how fast)
• Run hour of machine
• Describe the problem in detail as
possible
REGARDING GENUINE PARTS
AND FLUID
The BAD BOY genuine parts and u-
id are passed severe durability and
performance test. Please use BAD
BOY genuine parts for your safety.
We supply the service parts in accor-
dance with the separated quality as-
surance regulation.
Consult your local dealer for avail-
ability and pricing.
REGARDING SUPPLYING SER-
VICE PARTS
순
정
오
일
순정부품s
품s
Use BAD BOY genuine parts only!!
Genuine parts
Genuine oil or
equivalent
2024h_3026h.indb 32024h_3026h.indb 3 2020-09-18 오후 6:17:192020-09-18 오후 6:17:19
MEMO
2024h_3026h.indb 42024h_3026h.indb 4 2020-09-18 오후 6:17:192020-09-18 오후 6:17:19
3
3. SPECIFICATION
MAJOR SPECIFICATIONS ....................................................................3-2
DRIVING SPEED .....................................................................................3-5
2024h_3026h.indb 12024h_3026h.indb 1 2020-09-18 오후 6:17:192020-09-18 오후 6:17:19
3
-
2
BAD BOY TRACTOR
MAJOR SPECIFICATIONS
ITEMS 3026H
1. Drive system 4 Wheel Drive
2. Dimensions
Overall Length in. (mm) 110 (2,798)
Overall Width in. (mm) 53.9 (1,369)
Overall Height in. (mm) 91.4 (2,321)
Wheel Base in. (mm) 65.7 (1,670)
Tread
Front in. (mm) 45 (1,142)
Rear in. (mm) 43.2 (1,097)
Ground Clearance in. (mm) 16.4 (417)
Weight lbs (kg) 2,107 (956)
2024h_3026h.indb 22024h_3026h.indb 2 2020-09-18 오후 6:17:192020-09-18 오후 6:17:19
3
-
3
SPECIFICATION
3
ITEMS 2024H 3026H REMARKS
3. Engine
Model A1100N2
Type 3 CYL, Water Cooled, Diesel
Combustion System Swirl Chamber
Aspiration Natural
Engine Horsepower HP (kw) 24 (17.9) @2,600
Number. of Cylinders 3
Bore x Stroke in. (mm) 3.07 x 3.23 (78 x 82)
Displacement cu.in.(cc) 70.7 (1,175)
Compression Ratio 21.5:1
Fuel Consumption gal/hp.hr 0.067 (210 g/hp.hr)
Type of Air Cleaner Dry, Element
Fuel Tank Capacity gal (L) 6.08 (23)
4. Steering Hydrostatic
5. Clutch Dry, Single
6. Battery 12V
7. Brake Wet Disc
2024h_3026h.indb 32024h_3026h.indb 3 2020-09-18 오후 6:17:192020-09-18 오후 6:17:19
3
-
4
BAD BOY TRACTOR
ITEMS 2024H 3026H REMARKS
8. Transmission
Main Shifting Hydrostatic
Forward Reverse Method HST
Gear Stages (Front x Rear) HST
Travel Speed
Forward mph (kmh) 3.9~12.1(6.1~19.5) 4.5~14.8(7.0~23.9)
Reverse mph (kmh) 3.9~12.1(6.2~19.5) 4.5~14.8(7.1~23.9)
9. PTO
Type Live P.T.O. (6 Spline shaft)
Speed rpm 540 / 960 / Option: 2,500(Mid)
※
@2,600
10. Hydraulic
System
Type Position control
3 Point Hitch Telescopic lower link / Telescopic stabilizers
Category Category I
Lift capacity at lift point lbs (kg) 1,433 (650)
Pump capacity gal (L) 7.7 (29)
※
Per min
※
Specications are subject to change without notice. Contact your local BAD BOY dealer for more information.
2024h_3026h.indb 42024h_3026h.indb 4 2020-09-18 오후 6:17:192020-09-18 오후 6:17:19
3
-
5
SPECIFICATION
3
LEVEL
SHIFTING
2024H
RANGE
Forward
L 3.9 (6.1)
H 12.1 (19.5)
Reverse
L 3.9 (6.1)
H 12.1 (19.5)
☞
Rated Engine rpm: 2,600 rpm, Tire: agri 9.5-16 (423mm)
※
This specication will be changed without prior notice for improvement of quality.
※
Theory speeds gured by rated engine rpm. (mile/hr)
DRIVING SPEED
※
mi/h (km/h)
2024h_3026h.indb 52024h_3026h.indb 5 2020-09-18 오후 6:17:192020-09-18 오후 6:17:19
3
-
6
BAD BOY TRACTOR
LEVEL
SHIFTING
3026H
RANGE
Forward
L 4.3 (7.0)
M 8.0 (13.0)
H 14.9 (23.9)
Reverse
L 4.3 (7.0)
M 8.1 (13.0)
H 14.9 (23.9)
☞
Rated Engine rpm: 2,600 rpm, Tire: agri 11.2-20 (476mm)
※
This specication will be changed without prior notice for improvement of quality.
※
Theory speeds gured by rated engine rpm. (mile/hr)
※
mi/h (km/h)
2024h_3026h.indb 62024h_3026h.indb 6 2020-09-18 오후 6:17:202020-09-18 오후 6:17:20
4
4. OPERATION DESCRIPTION
EXTERIOR VIEW ..................................................4-2
SWITCHES AND LEVERS ...................................4-3
MAIN SWITCH ......................................................... 4-4
HAZARD WARNING FLASHER SWITCH .............. 4-4
TURN SIGNAL/LAMP SWITCH .............................. 4-5
CRUISE CONTROL SWITCH ................................. 4-6
HAND THROTTLE LEVER ...................................... 4-7
INSTRUMENT CLUSTER .....................................4-8
PTO INDICATOR ..................................................... 4-9
LEFT/RIGHT TURN SIGNAL INDICATOR ............. 4-9
HIGH BEAM INDICATOR ........................................ 4-9
PARKING BRAKE & BRAKE INDICATOR ........... 4-10
ENGINE OIL PRESSURE WARNING LAMP ....... 4-10
BATTERY CHARGE WARNING LAMP
....................... 4-10
PREHEAT INDICATOR .......................................... 4-11
FUEL GAUGE......................................................... 4-11
TACHOMETER/HOUR METER ............................ 4-11
COOLANT TEMPERATURE GAUGE ................... 4-12
CONTROLS 1(PEDALS) .....................................4-13
CLUTCH PEDAL .................................................... 4-14
BRAKE PEDAL ....................................................... 4-14
F-R HST DRIVE PEDAL ........................................ 4-15
CONTROLS 2(LEVER) .......................................4-16
RANGE SHIFT LEVER .......................................... 4-17
PTO SHIFT LEVER ................................................ 4-17
POSITION CONTROL LEVER .............................. 4-18
MFWD LEVER ........................................................ 4-18
FLOW CONTROL VALVE ...................................... 4-19
2024h_3026h.indb 12024h_3026h.indb 1 2020-09-18 오후 6:17:202020-09-18 오후 6:17:20
4
-
2
BAD BOY TRACTOR
EXTERIOR VIEW
(1) Steering Wheel
(2) Fuel Tank
(3) Hood
(4) Head Lamp
(5) Front Tire
(6) ROPS
(7) Seat
(8) Rear Tire
(9) Brake Lights
(10) Lower Link
2024h_3026h.indb 22024h_3026h.indb 2 2020-09-18 오후 6:17:202020-09-18 오후 6:17:20
4
-
3
OPERATION DESCRIPTION
4
(1) Steering Wheel (Handle)
(2) Main Switch
(3) Turn Signal / Lamp switch
(4) Instrument Cluster
(5) Hazard Warning Flasher Switch
(6) Cruise Control Switch
(7) Hand Throttle Lever
※
Refer to the relevant content for further de-
tailed information
SWITCHES AND LEVERS
2024h_3026h.indb 32024h_3026h.indb 3 2020-09-18 오후 6:17:202020-09-18 오후 6:17:20
4
-
4
BAD BOY TRACTOR
MAIN SWITCH
The main switch is used to start or
stop the engine.
OFF: The engine is stopped, and
current ends at the ignition switch.
ON: Electric current flows to all
switches in the electrical system.
START: When the start motor is en-
gaged, the engine will start. When
the engine is started, release the
key. The key will return to the "ON"
position automatically and the engine
will keep running.
(1) Main Switch (A) OFF
(B) ON (C) START
CAUTION
To start the engine, put the
shuttle shift lever to the "Neu-
tral" position to release the
safety start system.
CAUTION
When the tractor is not in use,
take out the key and keep it in
a safe place.
HAZARD WARNING FLASHER
SWITCH
Press the hazard flasher warning
switch in emergency to warn other ve-
hicles in order to prevent an accident.
Pressing this switch blinks all turn
signal lamps regardless of the posi-
tion of the main switch. Pressing it
again disables the asher function.
(1) Hazard Warning Flasher Switch
2024h_3026h.indb 42024h_3026h.indb 4 2020-09-18 오후 6:17:202020-09-18 오후 6:17:20
4
-
5
OPERATION DESCRIPTION
4
TURN SIGNAL/LAMP SWITCH
Turning the lamp switch clockwise to
the rst notch turns on the tail lamps
and instrument cluster. Turning it fur-
ther turns on the high/low beam.
Push up the turn signal lamp knob to
turn on the right turn signal lamp and
press down the knob to turn on the
left turn signal lamp. To sound the
horn, press the horn button in center
of the switch.
(1) Lamp Switch
(2) Turn Signal Lamp Knob (3) Horn Button
CAUTION
Prolonged operation can con-
sume electricity excessively.
Therefore, use it only in emer-
gency. Use it only when nec-
essary as it can discharge
the battery and obstruct other
drivers' view.
2024h_3026h.indb 52024h_3026h.indb 5 2020-09-18 오후 6:17:202020-09-18 오후 6:17:20
4
-
6
BAD BOY TRACTOR
1. When the machine has reached
the desired speed, press cruise
control switch to “ON” Release the
HST pedal and the machine will
operate at the selected speed.
2. When applying full pressure to the
Brake pedals, the cruise control
will deactivated and it will be nec-
essary to reset the cruise control
to the desired speed.
3. When applying light pressure to
the Brake pedals, the machine’s
ground speed will be reduced until
the Brake pedals are released. At
that point, the machine will contin-
ue at the previous setting.
4. To reset the desired speed, you
should turn off the cruise con-
trol switch, then increase machine
speed to reach the desired speed
and push cruise switch to on.
CAUTION
When stopping the machine
cruise control automatically
diseagages.
Make sure to connect the both
Brake pedals when use cruise
control function.
[Otherwise]
There is a risk abrupt turning
or overturning due to one-sided
Braking when the Brake pedal is
depressed.
CRUISE CONTROL SWITCH
(1) Cruise Control Switch
(2) Brake Pedal
2024h_3026h.indb 62024h_3026h.indb 6 2020-09-18 오후 6:17:202020-09-18 오후 6:17:20
4
-
7
OPERATION DESCRIPTION
4
The hand throttle lever is to increase
or decrease the engine rpm. This le-
ver is mainly used while working on
a eld with the constant engine rpm.
Increasing engine RPM
Decreasing engine RPM
HAND THROTTLE LEVER
Use the foot throttle pedal
during driving for travel, not
the hand throttle lever.
NOTE
(1) Hand Throttle Lever
(A)
High Speed (B) Low Speed
2024h_3026h.indb 72024h_3026h.indb 7 2020-09-18 오후 6:17:202020-09-18 오후 6:17:20
4
-
8
BAD BOY TRACTOR
INSTRUMENT CLUSTER
(1) PTO Indicator
(2) Turn Signal Indicator
(3) High Beam Indicator
(4)
Parking Brake (Brake) Indicator
(5)
Engine Hydraulic Pressure Indicator
(6) Charge Warning Lamp
(7) Preheat Indicator
(8) PTO Rotating Position
(9) Tachometer
(10) Fuel Gauge
(11) Hour Meter
(12) Coolant Temperature Gauge
(13) DPF Indicator
2024h_3026h.indb 82024h_3026h.indb 8 2020-09-18 오후 6:17:212020-09-18 오후 6:17:21
4
-
9
OPERATION DESCRIPTION
4
PTO INDICATOR
This comes on when the PTO clutch
switch is in the "IND" or "LINK" posi-
tion.
LEFT/RIGHT TURN SIGNAL
INDICATOR
This indicates the condition when op-
erating one of the turn signal lamps
for the desired turning direction.
HIGH BEAM INDICATOR
It indicates the high beam. Select the
low beam for driving on a road.
(1) PTO Indicator (1) Left Turn Signal Indicator
(2) Right Turn Signal Indicator
(1) High Beam Indicator
1
1
2
2
12
1
1
1
1
1
1
2024h_3026h.indb 92024h_3026h.indb 9 2020-09-18 오후 6:17:212020-09-18 오후 6:17:21
4
-
10
BAD BOY TRACTOR
PARKING BRAKE & BRAKE IN-
DICATOR
(1) Parking Brake (Brake) Indicator
This comes on when the parking
brake is applied or the brake ped-
al is depressed. [US] This comes on
when the parking brake is applied
only. [EU] If the parking brake is ap-
plied, release the parking brake lever
before driving. However, the lamp
on the right side does not come on if
only one side brake is released.
ENGINE OIL PRESSURE
WARNING LAMP
Lamp will come on when the ignition
switch is put into the “ON” position. It
will turn o when the engine is started.
If this lamp comes on while the engine
is running, it indicates a problem in the
engine oil system. Stop the engine im-
mediately and check for problems.
(1) Engine Oil Pressure Warning Lamp
1
1
1
1
1
1
BATTERY CHARGE WARNING LAMP
The battery charge warning lamp is
turned on when the ignition switch is
initially turned to the "ON" position be-
fore starting the engine but turned off
after starting the engine. If this lamp
comes on while driving, the charging
system is malfunctioning. In this case,
check the fan belt or ask your local
dealer for further inspection if neces-
sary.
(1) Battery Charge Warning Lamp
1
1
1
2024h_3026h.indb 102024h_3026h.indb 10 2020-09-18 오후 6:17:212020-09-18 오후 6:17:21
4
-
11
OPERATION DESCRIPTION
4
TACHOMETER/HOUR METER
The tachometer indicates the engine
rpm and the hour meter indicates the
total run hour of the tractor.
(1) Tachometer (2) Hour Meter
PREHEAT INDICATOR
The 4WD indicator comes on when the
4WD lever is placed in "ON" position.
(1) Preheat Indicator
FUEL GAUGE
This indicates the remaining fuel level.
Immediately ll the fuel tank if the nee-
dle reads the red area.
(1) Fuel Gauge
1
1
1
2024h_3026h.indb 112024h_3026h.indb 11 2020-09-18 오후 6:17:212020-09-18 오후 6:17:21
4
-
12
BAD BOY TRACTOR
COOLANT TEMPERATURE GAUGE
This coolant temperature gauge indi-
cates the engine coolant temperature
after the ignition switch is turned to
the "ON" position. If the needle reads
the red area, immediately stop work-
ing and then inspect the tractor.
(1) Coolant Temperature Gauge
•
Coolant temperature over 5
℃
:
1 sec. or shorter / Less than
5
℃
: 3 - 30 seconds
NOTE
2024h_3026h.indb 122024h_3026h.indb 12 2020-09-18 오후 6:17:212020-09-18 오후 6:17:21
4
-
13
OPERATION DESCRIPTION
4
CONTROLS 1(PEDALS)
(1) Brake Pedal
(2) Clutch Pedal
(3) Forward Pedal
(4) Backward Pedal
※
Refer to the relevant content for further de-
tailed information
2024h_3026h.indb 132024h_3026h.indb 13 2020-09-18 오후 6:17:222020-09-18 오후 6:17:22
4
-
14
BAD BOY TRACTOR
CLUTCH PEDAL
If the clutch pedal is depressed, driv-
ing power is stopped supplying.
When the clutch pedal is depressed,
the main/range shift lever can be op-
erated. To start o smoothly, release
the clutch pedal slowly.
(1) Clutch Pedal
BRAKE PEDAL
Brake pedals are independent of
each other and can be used for mak-
ing a small turn on the pavement.
Depressing the brake pedal on the
side to which to make a turn, the rear
wheel on that side is stopped and the
tractor can make a small turn.
(1) Brake Pedal
WARNING
Make sure to interlock the left
and right brake pedals with
the link bracket while driving
for travel.
If this instruction is ignored,
there is a risk of an accident
such as rollover due to unin-
tended movement.
2024h_3026h.indb 142024h_3026h.indb 14 2020-09-18 오후 6:17:222020-09-18 오후 6:17:22
4
-
15
OPERATION DESCRIPTION
4
F-R HST DRIVE PEDAL
It is used for shifting between “for-
ward” and “reverse” drive. And stay
pedals at neutral machine should be
stopped.
(1) HST Pedal Forward
(2) HST Pedal Reverse
WARNING
For safety, do not shift quickly
from “forward” to “reverse”or
from “reverse” to “forward”.
Engage Brake pedals when
stopping the machine for ma-
chine to stop quickly.
2024h_3026h.indb 152024h_3026h.indb 15 2020-09-18 오후 6:17:222020-09-18 오후 6:17:22
4
-
16
BAD BOY TRACTOR
CONTROLS 2(LEVER)
(1) Range Shift Lever
(2) PTO Shift Lever
(3) MFWD Lever
(4) Position Control Lever
(5) Parking Brake
※
Refer to the relevant content for further de-
tailed information
2024h_3026h.indb 162024h_3026h.indb 16 2020-09-18 오후 6:17:222020-09-18 오후 6:17:22
4
-
17
OPERATION DESCRIPTION
4
(1) Range Shift Lever
(A) H igh (B) Low
RANGE SHIFT LEVER
The range gear is shifted in three
stages, in combination with the main
gear shifting. When shifting the range
gear, depress clutch fully.
PTO SHIFT LEVER
The revolution of the PTO shaft can
be shifted in two stages. (1st Rear
540 rpm : 2nd Rear 960 rpm - Mid
2500 rpm) When shifting level, press
clutch pedal deeply.
(1) PTO Shift Lever
CAUTION
Do not shift while driving.
[Otherwise] The gear may be
damaged.
CAUTION
Observe the PTO speed desig-
nated on the work unit.
Otherwise, the work unit may
be damaged and cause an ac-
cident.
2024h_3026h.indb 172024h_3026h.indb 17 2020-09-18 오후 6:17:222020-09-18 오후 6:17:22
4
-
18
BAD BOY TRACTOR
MFWD LEVER
It is used to shift between 2-wheel
drive and 4 wheel drive. Depress
clutch pedal or stop machine when
shifting the lever.
(1) MFWD Lever
(A) Disconnect (B) Connect
POSITION CONTROL LEVER
It is used to keep the implement con-
stantly at a certain position.
A stopper is used to fix the position
control lever in the “up” position while
driving on a road.
When lowering the implement, set the
position control lever, and the imple-
ment will go down to the set position.
(1) Position Control Lever
(A) Lowering (B) Lifting
WARNING
•
Conrm that no one or a foot
is under the implement before
operating the system.
[Otherwise]
There is a risk of injury.
CAUTION
Do not shift while driving.
[Otherwise] The gear may be
damaged.
2024h_3026h.indb 182024h_3026h.indb 18 2020-09-18 오후 6:17:222020-09-18 오후 6:17:22
4
-
19
OPERATION DESCRIPTION
4
FLOW CONTROL VALVE
It is used to regulate the lowering
speed of the implement (slow return
function). Also, if you wind the valve
fully to the right, the hydraulic pres-
sure to the device raising the imple-
ment is stopped.
(1) Flow Control Valve
WARNING
Do not work under or put a
foot under the implement.
[Otherwise] The implement may
fall and cause an injury.
2024h_3026h.indb 192024h_3026h.indb 19 2020-09-18 오후 6:17:222020-09-18 오후 6:17:22
MEMO
2024h_3026h.indb 202024h_3026h.indb 20 2020-09-18 오후 6:17:222020-09-18 오후 6:17:22
5
5. OPERATION
DAILY INSPECTION BEFORE STARTING ........5-3
PRE-OPERATION CHECK ...................................5-3
RUNNING-IN PERIOD .......................................... 5-10
STARTING / STOPPING THE ENGINE ............. 5-11
STARTING ENGINE .............................................. 5-12
COLD START ......................................................... 5-14
STOPPING ENGINE .............................................. 5-14
TRACTOR OPERATION .....................................5-15
WHEN ATTACHING WEIGHT ............................... 5-15
REDUCE SPEED WHEN TOWING LOAD ........... 5-15
HOW TO DRIVE ..................................................... 5-16
DRIVING ON THE ROAD ...................................... 5-19
DRIVING ON THE SLOPE .................................... 5-20
ENTERING AND LEAVING THE PAVEMENT .... 5-20
TURNING ON THE PAVEMENT ........................... 5-21
STOPPING ............................................................. 5-22
PARKING ................................................................ 5-23
TO RAISE OR LOWER THE IMPLEMENT .......... 5-24
A
DJUSTING THE LOWERING SPEED OF
THE IMPLEMEN
T
.................................................. 5-24
TRACTOR LOADING /UNLOADING .................... 5-25
ATTACHMENT OF IMPLEMENT ......................5-26
ATTACHMENT POSITION .................................... 5-26
CENTER LINK ADJUSTMENT ............................. 5-27
ATTACHING IMPLEMENT .................................... 5-27
ADJUSTMENT OF CHECK BAR .......................... 5-28
INSTALLATION OF PTO DRIVEN IMPLEMENT . 5-29
CYLINDER HOSE CONNECTION ....................... 5-30
PRECAUTIONS FOR CONNECTING
THE IMPLEMENT .................................................. 5-31
PRECAUTIONS FOR HANDLING IMPLEMENT .... 5-32
ROTAVATOR .......................................................... 5-32
EFFECTIVE PLOWING PATTERN ....................... 5-33
ADJUSTING WHEEL TREAD ............................5-36
TIRES, WHEELS AND BALLAST ......................... 5-37
TIRE TYPE ............................................................. 5-37
WHEEL AND AXLE ................................................ 5-37
2024h_3026h.indb 12024h_3026h.indb 1 2020-09-18 오후 6:17:222020-09-18 오후 6:17:22
5. OPERATION
POWER STEERING ............................................5-37
TOWING INSTRUCTIONS..................................5-38
PTO SPECIFICATIONS & PRECAUTIONS .....5-38
LOADER OPERATION .......................................5-39
CARRYING THE LOAD ......................................5-40
HANDLING LARGE HEAVY OBJECTS ............5-41
ROPS FOLDING METHOD ................................5-42
HOW TO FOLD DOWN THE ROPS ..................... 5-42
HOW TO STAND UP THE ROPS ......................... 5-42
2024h_3026h.indb 22024h_3026h.indb 2 2020-09-18 오후 6:17:222020-09-18 오후 6:17:22
5
-
3
OPERATION
5
DAILY INSPECTION BEFORE
STARTING
1. Check the engine oil level.
After wiping out the dipstick, insert
it fully and then withdraw it. Oil
should be between the two marks
on dipstick.
Do not operate the engine if oil
level is below minimum mark. If
below, add the corresponding
grade oil according to the season
through the ller.
2. Feed grease to all greasing points
indicated below every 10 hours
when working in damp and muddy
conditions.
Front axle pin
Steering shaft and Cylinder end
Tie rod both ends
Front axle supporter
3. After cleaning the machine with
highly pressurized water, lubricate
the indicated points with grease
below if necessary.
Bonnet latch
Seat sliding rail
PRE-OPERATION CHECK
•
Do not provide illumination
with a lit cigarette or a lighter
when fueling.
•
Never fill the fuel tank while
the engine is running or hot.
•
After lling the fuel tank, close
the fuel filler cap complete-
ly and wipe o the excess fuel
thoroughly.
•
If the fuel hoses are damaged,
fuel will leak. Make sure that
you check for any leakage.
DANGER
•
Perform the maintenance on a
at and safe location that will
keep the tractor in place and
will not cause a risk to peo-
ple passing by. Before carry-
ing out the maintenance, place
blocks at the front tires to pre-
vent movement.
[Otherwise]
An unexpected accident may oc-
cur, such as overturning of the
tractor.
•
When going under the imple-
ment, fully close the slow/stop
valve.
[Otherwise]
There is a risk of injury due to
implement falling.
WARNING
2024h_3026h.indb 32024h_3026h.indb 3 2020-09-18 오후 6:17:222020-09-18 오후 6:17:22
5
-
4
BAD BOY TRACTOR
•
Stop the engine during check-
ing, maintenance, or repair
•
Carry out the maintenance
work after heated area such as
the mu er or the engine have
fully cooled down.
[Otherwise]
There is risk of burn.
•
After detaching the covers
for checking or maintenance,
make sure to put them back in
their place.
[Otherwise]
There is a risk that you may get
entangled in the tractor or get
injured.
CAUTION
To ensure a safe and comfortable
operation, please carry out the rou-
tine check-up everyday before start-
ing work. Correct any problem imme-
diately, and also check for problems
after work. This checking should be
done in the following sequence.
1. Check the suspicious parts of the
previous day.
• Check the parts that you thought
were not normal during the work
of previous day.
2. Check around the tractor.
• Deformation, damage or stains.
• Tire pressure and abrasion.
• Damage to the tractor, or loos-
ened bolts.
• Loosening of wheel bolts.
• Fuel quantity, fuel leaks, or dam-
age to the fuel hose.
2024h_3026h.indb 42024h_3026h.indb 4 2020-09-18 오후 6:17:232020-09-18 오후 6:17:23
5
-
5
OPERATION
5
3. Open the engine hood.
• Engine oil level, contamination,
or leakage.
• Engine coolant level, leakage, or
damage to the hose.
• Battery solution level.
2024h_3026h.indb 52024h_3026h.indb 5 2020-09-18 오후 6:17:232020-09-18 오후 6:17:23
5
-
6
BAD BOY TRACTOR
• Air cleaner.
• Fan belt tension, damage. • Dust or straw on the radiator grill or
the engine.
2024h_3026h.indb 62024h_3026h.indb 6 2020-09-18 오후 6:17:232020-09-18 오후 6:17:23
5
-
7
OPERATION
5
• Damage to the coating of the ca-
bles, or loosening of the contacts.
4. Check around the implement.
• Condition of the locking pin of
the universal joint inserted in the
PTO shaft.
• Condition of pins in each part.
• Loosening of the bolts holding
the blade.
• Quantity of oil in each part. For
more details, please refer to the
implement manufacturer’s in-
structions.
5. Check on the driver seat.
• Operational condition and free
play of the brake. (0.2~0.4 in)
A
A
(A) Free play 0.2 ~ 0.4 in
2024h_3026h.indb 72024h_3026h.indb 7 2020-09-18 오후 6:17:242020-09-18 오후 6:17:24
5
-
8
BAD BOY TRACTOR
• Free play of the steering wheel.
(0.8~2.0 in)
(A) Free play 0.8 ~ 2.0 in
A
A
• Operational condition and free play
of the clutch pedal. (Manual trans-
mission only)
6. Start the engine.
• Abnormal noise from the engine.
(A) Free play 1.0 ~ 1.4 in
A
A
2024h_3026h.indb 82024h_3026h.indb 8 2020-09-18 오후 6:17:242020-09-18 오후 6:17:24
5
-
9
OPERATION
5
• Color of the exhaust gas. • Operation of lamps and gauges
►Boarding and Leaving The Tractor
Use Steps and Hand-holds Correctly
1. Prevent falls by facing the ma-
chine when getting on and off.
Maintain 3-point contact with steps
and handrails. Never use machine
controls as hand-holds.
2. Use extra care when mud, snow,
or moisture present slippery con-
ditions. Keep steps clean and free
2024h_3026h.indb 92024h_3026h.indb 9 2020-09-18 오후 6:17:242020-09-18 오후 6:17:24
5
-
10
BAD BOY TRACTOR
•
Getting off the tractor, make
the implement descend.
[Otherwise]
The implement descends itself,
and then causes some unex-
pected accident.
DANGER
of grease or oil. Never jump when
exiting machine. Never mount or
dismount a moving machine
RUNNING-IN PERIOD
▶
Within rst 10 hours of operation
Inspect daily or every 10 hours
Tighten the wheel bolts
▶
After rst 50 hours of operation
Tighten the wheel, disc and hub
bolts
Check the alternator and fan belt
tension as well as air inlet
Tighten the cooling system's
hose and clamp
Perform the scheduled 50-hour
maintenance
IMPORTANT
•
Always keep wheel bolts
tightened to prevent any
accident. Confirm that the
wheel bolts are tight before
operation. Check wheel bolt
torque at least twice within
the rst 10 hours of operation,
check it periodically at every
50 hours thereafter. Change
the oil and filter after first 50
hours of operation.
Change the transmission/hy-
draulic oil and oil lter element
Change the engine oil and lter
Change the front axle uid
2024h_3026h.indb 102024h_3026h.indb 10 2020-09-18 오후 6:17:242020-09-18 오후 6:17:24
5
-
11
OPERATION
5
STARTING / STOPPING THE ENGINE
•
When starting the engine,
make sure that you are seated
in the driver’s seat and check
position of the levers and the
safety around the tractor.
[Otherwise]
There is a risk of injury.
•
Do not start the engine in an
enclosed space. You must
start the engine outside of
building. If you should have to
start the engine inside a build-
ing, make sure that the space
is well ventilated.
[Otherwise]
The exhaust gas can cause in-
toxication and can lead to fatal
consequences.
DANGER
•
Make sure to carry out check-
ing and maintenance before
and after the use of the trac-
tor, particularly the operat-
ing devices such as the clutch
and the brake lever.
[Otherwise]
There is a risk of injury or ma-
chinery breakdown. Engage
the parking brake during warm-
ing-up. Otherwise, the tractor
may move and cause an acci-
dent.
•
Don’t crank engine unless
hitch control lever is in the
lowest position.
[Otherwise]
Implement might rise quick-
ly and there is a risk of injury or
machinery breakdown.
CAUTION
Check the engine operation carefully.
IMPORTANT
•
The engine is tuned or set for
normal use. In case of a new
tractor, especially carry out in-
spection and check within rst
100 hours.
Be sure to warm up the engine. In-
spect the battery charge warning
lamp, oil pressure warning lamp
and engine coolant temperature
gauge.
Avoid any unnecessary engine
idling.
Frequently check the engine oil,
coolant, transmission fluid and
front axle oil levels. Also, inspect
for leakage of those uids.
•
Make sure to add the corre-
sponding grade oil for the
season. Use only genuine oil
specied by BAD BOY.
NOTE
2024h_3026h.indb 112024h_3026h.indb 11 2020-09-18 오후 6:17:252020-09-18 오후 6:17:25
5
-
12
BAD BOY TRACTOR
STARTING ENGINE
1. Check the fuel gauge. Make sure
that a su cient amount of fuel is
in the tank.
1
1
1
1
1
1
(1) Fuel Gauge
2. Check the position of the imple-
ment. Push the control lever for-
ward to lower the implement down
onto the ground.
•
Don’t crank engine unless po-
sition control lever is in the
lowest position.
[Otherwise]
Implement might rise quick-
ly and there is a risk of injury or
machinery breakdown.
•
Check the safety around the
tractor and start to move slow-
ly.
[Otherwise]
There is a risk of injury.
WARNING
(1) Position Control Lever
(A) Lowering (B) Lifting
2024h_3026h.indb 122024h_3026h.indb 12 2020-09-18 오후 6:17:252020-09-18 오후 6:17:25
5
-
13
OPERATION
5
3. Place the hand throttle lever to the
Minimum position.
4. After the thermostat lamp has
turned o, depress the clutch ped-
al fully and turn main key switch to
start.
(1) Hand Throttle Lever
: Faster Engine RPM (A)
: Slower Engine RPM (B)
5. Turn the main key switch to the
"START" position. When the en-
gine is started, take your hand o
the key.
6. Increase the engine to about 1,500
rpm and warm it up for about ve
minutes without a load.
IMPORTANT
•
Do not operate the start mo-
tor more than 20 seconds at a
time. If the start motor won't
start, wait until the motor is
cooled down at least for 2 min-
utes and then try again.
(1) Main Key Switch (A) OFF
(B) ON (C) START
2024h_3026h.indb 132024h_3026h.indb 13 2020-09-18 오후 6:17:252020-09-18 오후 6:17:25
5
-
14
BAD BOY TRACTOR
COLD START
1. When starting in cold weather, turn
the ignition switch to the "ON" po-
sition and then wait until the pre-
heat indicator is turned o.
2. For safe operation, turn the igni-
tion switch to the "START" position
with the clutch pedal depressed.
3. Repeat the above procedures until
the engine is operated smoothly.
4. Let the engine idle at 1,200 rpm to
warm up the engine up to the op-
erating temperature.
CAUTION
•
In case of the tractor equipped
with the cold start system, do
not use starting uid.
1. Put the acceleration lever on LOW,
and turn the main switch to “OFF”.
2. Put shuttle lever, main gearshift
lever and PTO shift lever to “N”.
put PTO ON/OFF switch in to the
“OFF” position and 4WD lever po-
sition on disengage.
3. Put the hitch control lever on
“DOWN”
STOPPING ENGINE
•
When stopping the engine,
never stop it with the reducer
lever.
•
After stopping the engine,
make sure to apply the park-
ing brake.
CAUTION
•
For warming-up operation,
strongly step on the brake
pedal and pull your parking
brake.
NOTE
•
When leaving the tractor, park
the tractor in a flat and safe
place, put the shuttle lever
and the main shift lever to “N”,
and block the tires.
[Otherwise]
The tractor may move and cause
an accident. Always set the park-
ing brake.
WARNING
(1) Hand Throttle Lever
: Faster Engine RPM (A)
: Slower Engine RPM (B)
2024h_3026h.indb 142024h_3026h.indb 14 2020-09-18 오후 6:17:252020-09-18 오후 6:17:25
5
-
15
OPERATION
5
1. Reduce the speed when driving
on a bumpy or rough ground.
2. Attach the additional weight need-
ed for stability and safe cornering
if required.
3. Make sure that the front wheels
are not risen up when transport-
ing implements or towing a heavy
load.
TRACTOR OPERATION
WHEN ATTACHING WEIGHT
CAUTION
•
Do not drive on a road under a
heavily loaded condition. Oth-
erwise, it can lead to an injury
or machine damage.
Observe the guideline for towing
speed and capacity as below.
1. If the trailed weight is
the same or
lighter than the tractor, maintain
the maximum speed of 16 mph
(26 km/h.)
2. If the trailed weight is twice the
tractor or less, maintain the maxi-
mum speed of 8 mph (13 km/h.)
3. If the trailed weight is more than
twice the tractor, do not tow it.
4. Be careful especially when tow-
ing a load on a bad condition of
ground, slope or corner.
REDUCE SPEED WHEN TOWING LOAD
CAUTION
•
The stopping distance be-
comes longer on a down-
hill in proportion to the speed
and load weight. If the towed
weight is heavier than the trac-
tor and the braking system is
not installed on the trailer, re-
duce the speed. Observe the
guideline for towing speed
and capacity.
2024h_3026h.indb 152024h_3026h.indb 15 2020-09-18 오후 6:17:252020-09-18 오후 6:17:25
5
-
16
BAD BOY TRACTOR
HOW TO DRIVE
(1) Seat belt (2) Seat sliding lever
1. Adjust the seat properly and
fasten the seat belt. Adjust the
seat to easily reach the pedal and
the steering wheel.
If the seat belt is worn across the
abdomen or waist, not the hips, an
injury can occur in case of an acci-
dent or impact.
Adjust the levers properly accord-
ing to the driver's physical condi-
tion.
CAUTION
If the tractor is out of control, it
can cause a personal injury or
even death. Keep the following
instructions on a road:
•
Interlock the both brake ped-
als.
•
Use the foot throttle pedal.
•
Reduce the speed while driv-
ing on a slippery, or gravel
road.
•
Attach the proper weight.
•
When reducing the speed, use
the brake gently and carefully.
IMPORTANT
•
Don’t put a foot on the brake
pedal unnecessarily during
driving. Such action can re-
duce the brake's service life.
2024h_3026h.indb 162024h_3026h.indb 16 2020-09-18 오후 6:17:252020-09-18 오후 6:17:25
5
-
17
OPERATION
5
2. Check if both brake pedals are in-
terlocked.
(1) Brake Pedal
3. Lift the implement.
4. Control the hand throttle lever. In-
crease the engine rpm from low to
high speed gradually.
(1) Position Control Lever
(A) Lowering (B) Lifting
(1) Hand Throttle Lever
: Faster Engine RPM (A)
: Slower Engine RPM (B)
2024h_3026h.indb 172024h_3026h.indb 17 2020-09-18 오후 6:17:262020-09-18 오후 6:17:26
5
-
18
BAD BOY TRACTOR
5. Release the parking brake. Press
the button on the end of the park-
ing brake lever and push the lever
forward.
(1) Parking Brake Lever
6. Put the range shift levers into the
proper positions as the operator’s
intention.
(1) Range shift lever
CAUTION
•
The range shift lever should
be operated while the vehicle
is stationary. If not, there is a
risk of machinery damage.
7. Operate the HST pedal. This ped-
al is used to select forward or re-
verse driving of the tractor.
(1) HST Pedal Forward
(2) HST Pedal Reverse
2024h_3026h.indb 182024h_3026h.indb 18 2020-09-18 오후 6:17:262020-09-18 오후 6:17:26
5
-
19
OPERATION
5
CAUTION
•
Don’t put a foot on the clutch
pedal unnecessarily during
driving. Otherwise, the clutch
is set in the slip position, re-
sulting in premature wear of
the clutch.
•
Do not change the tractor
speed abruptly for safe driv-
ing.
•
Be careful of all directions of
the tractor before driving. If
not, it can cause an accident.
•
When driving on a steep slope
or moving to a location for
loading or unloading, do not
put your hand on the main
shift lever. If the shift lever is
half engaged, it can lead to an
accident. Make sure to place
the lever in the low speed po-
sition in advance.
DRIVING ON THE ROAD
•
When driving on a road or
crossing a dike, make sure to
connect the brake pedals. Oth-
erwise, the tractor may turn
abruptly or turn over due to
one-sided braking.
•
Observe the trac regulations
when driving on the road. Oth-
erwise, you may be involved
in an accident.
WARNING
•
This tractor is designed to ac-
commodate only one person. Do
not allow anyone on the tractor
other than the driver. Otherwise,
you will be exposed to a risk of
accident.
•
Put the PTO lever into “N” and
connect the brake pedals.
•
When making a turn, turn on the
direction indicator lamp to inform
other vehicles of your intention.
•
Pay particular cautions to narrow
farm roads, slopes, and grassy
shoulders, and reduce the speed.
•
Put the position control lever to
UP and lock it with the stopper.
Otherwise, you will be exposed
to a risk of an accident.
•
Connect the brake pedals when
driving on a road. Otherwise,
there is a risk of abrupt turning
or overturning due to one-sided
braking.
•
Before every operation, make
sure that operator wears safety
belt.
WARNING
2024h_3026h.indb 192024h_3026h.indb 19 2020-09-18 오후 6:17:262020-09-18 오후 6:17:26
5
-
20
BAD BOY TRACTOR
DRIVING ON THE SLOPE
•
Select a proper speed, and do
not shift the gear.
•
Do not park on a slope. Oth-
erwise, the tractor may slip or
overturn and cause an acci-
dent.
•
Reduce speed and pay special
attention to the speed.
WARNING
Do not put the
gear in neutral
on a slope!
•
Do not depress the clutch
pedal when driving on a slope.
The tractor may slide down
and lead to a serious situa-
tion.
•
When starting the tractor up-
wards on a slope, start slow-
ly in low gear with low engine
rpm. Otherwise, the front of
the tractor may be lifted and
cause a very dangerous situa-
tion.
•
You may shift the gear when
you are no longer on the
slope. If you stop on a slope,
apply the parking brake. Oth-
erwise, you may be exposed
to a risk of accident.
WARNING
ENTERING AND LEAVING THE
PAVEMENT
•
Make sure to connect the
brake pedal. Otherwise, the
tractor may turnover due to
one-sided braking.
WARNING
Keep
im
plement
plement
plement
low
until
rear
wh
eels
are
on
the pavement
the pavement
the pavement
Perpen-
dicular to
pavement!
Keep implement
low until rear
wheels are on
the pavement
2024h_3026h.indb 202024h_3026h.indb 20 2020-09-18 오후 6:17:262020-09-18 오후 6:17:26
5
-
21
OPERATION
5
•
When you cross a dike or
raised ground to enter or leave
the pavement, use loading
ramps with su cient strength,
and lower the implement to
achieve a lower center of grav-
ity.
•
Drive backward when climb-
ing up a steep slope, and drive
forward when climbing down.
WARNING
•
Enter or leave the pavement
in a perpendicular direction.
When climbing onto the pave-
ment, lower the implement to
achieve a lower center of grav-
ity. Once all wheels of the trac-
tor are on the pavement, raise
the implement.
NOTE
TURNING ON THE PAVEMENT
When making a turn, reduce the en-
gine rpm and make a slow turn.
When making a turn on the pave-
ment, remove the connector of the
brake pedals. Depress the brake
pedal on the side to which to make
a turn, while steering the wheel, this
will allow the tractor to make the turn
without moving ahead. Make sure to
keep the implement in the up posi-
tion when making a turn.
•
Make sure to release the dif-
ferential lock before making a
turn.
[Otherwise]
The tractor will not turn in the in-
tended direction. It may cause
an accident.
WARNING
Depress the pedal while
steering the wheel!
2024h_3026h.indb 212024h_3026h.indb 21 2020-09-18 오후 6:17:272020-09-18 오후 6:17:27
5
-
22
BAD BOY TRACTOR
STOPPING
1. Stop the tractor with the brake
pedal.
2. Put the main shift lever to the neu-
tral position.
3. Put the shuttle lever to the neutral
position.
4. Put all SCV levers to the neutral
position.
5. Set the PTO switch in the OFF po-
sition.
6. Lower all implements on the
ground.
7. Push the hand throttle lever back
slowly to decelerate the engine
and keep the engine for 1 - 2 min-
utes of unloaded idling.
8. Make sure the parking brake is
applied.
9. Turn the main switch to the
「
OFF
」
position to stop the en-
gine.
CAUTION
•
When leaving the tractor, put
the shuttle lever into the neu-
tral position. If not, the trac-
tor may move even though the
engine is stopped.
IMPORTANT
•
The tractor needs to be sta-
tionary before making a shift.
If the parking brake is applied
while the tractor is moving,
the transmission can be dam-
aged.
•
Each part of the engine is
cooled down by the engine oil.
If the hot engine is suddenly
stopped, its high temperature
or insufficient lubricant can
cause damage to the related
parts.
CAUTION
•
Remove the ignition key be-
fore leaving the tractor to pre-
vent its use by an unqualied
person.
2024h_3026h.indb 222024h_3026h.indb 22 2020-09-18 오후 6:17:272020-09-18 오후 6:17:27
5
-
23
OPERATION
5
PARKING
CAUTION
•
The brake disc can be rapid-
ly worn if you drive with the
parking brake applied. To park
the vehicle, apply the parking
brake and then place prop un-
der the rear wheels.
1. When parking or stopping the trac-
tor, pull the parking brake lever se-
curely.
(1) Parking Brake Lever
2024h_3026h.indb 232024h_3026h.indb 23 2020-09-18 오후 6:17:272020-09-18 오후 6:17:27
5
-
24
BAD BOY TRACTOR
1. This position control lever can be
used to lower and lift an imple-
ment freely.
2. Pulling the lever back lifts the im-
plement while pushing it forward
lowers the implement.
CAUTION
•
To avoid a personal injury, use
the position control lever when
attaching/detaching the imple-
ment.
TO RAISE OR LOWER THE
IMPLEMENT
ADJUSTING THE LOWERING SPEED OF THE IMPLEMENT
•
Do not work under or put a
foot under the implement.
[Otherwise]
The implement may fall and
cause an injury.
WARNING
For adjusting the lowering speed,
turn
valve (A) to the left for faster
movement or (B) to the right for slow-
er movement. Turning the valve fully
to the right (B) will block the hydrau-
lic pressure and will cause the imple-
ment to stop.
(1) Flow Control Valve
(A) Fast (B) Slow
(1) Position Control Lever
(A) Lowering (B) Lifting
2024h_3026h.indb 242024h_3026h.indb 24 2020-09-18 오후 6:17:272020-09-18 오후 6:17:27
5
-
25
OPERATION
5
TRACTOR LOADING /UNLOADING
•
Fix the direction so that the
tractor will not have to mod-
ify its direction on the load-
ing bridge, and proceed at the
lowest speed.
•
Never depress the clutch ped-
al to change direction or stop.
[Otherwise]
There is a danger that the tractor
may turn over.
DANGER
•
Loading and unloading must
be done on a flat and safe
place, with the engine turned
off and the parking brake en-
gaged. The loading lamp must
be non-slippery and have su-
cient strength, length, and width
for the tractor. To avoid slipping
of the loading lamp, latch it se-
curely onto the truck. Move the
tractor backward when loading,
and forward when unloading.
Fasten the tractor to the truck
securely with rope.
[Otherwise]
The tractor may fall o the truck
and cause an accident.
WARNING
2024h_3026h.indb 252024h_3026h.indb 25 2020-09-18 오후 6:17:272020-09-18 오후 6:17:27
5
-
26
BAD BOY TRACTOR
ATTACHMENT OF IMPLEMENT
ATTACHMENT POSITION
(1) Lift link
(2) Lower link
(3) Center link
(4) Check bar
(5) Draw bar
CAUTION
Select an implement to match
the tractor horse power;
The tractor horse power should
correspond with the size of an
implement. If the power level of
tractor is exceeded, the imple-
ment may be damaged. Also,
if the implement is too big, the
tractor may be damaged. Be
sure of the maximum and mini-
mum power of the tractor before
attaching an implement.
2024h_3026h.indb 262024h_3026h.indb 26 2020-09-18 오후 6:17:272020-09-18 오후 6:17:27
5
-
27
OPERATION
5
CENTER LINK ADJUSTMENT
The center link can be installed to 3
selective positions according to the
working condition.
A: If the center link is attached to the
top position, the draft system will
not be activated. This is good for
the implement such as a drilling
machine or equivalent which does
not require any traction force.
B: The center hole is the standard in-
stallation hole for a rotary tiller.
(1) Center link (A) Low traction
(B) Mid traction (C) High traction
ATTACHING IMPLEMENT
(1) Implement (2) Lower link
C: If the center link is attached to the
bottom position, the draft system
will be activated with highest sen-
sitivity which is suitable for the im-
plement such as a plow or equiva-
lent which requires traction force.
1. Drive the tractor backward to move
close to an implement to fit the
position of 3-point hitch.
2. Apply the parking brake and stop
the engine.
3. Attach the lower link to the link
hook and insert pin in to hook.
2024h_3026h.indb 272024h_3026h.indb 27 2020-09-18 오후 6:17:272020-09-18 오후 6:17:27
5
-
28
BAD BOY TRACTOR
•
To prevent the locker shaft
from unexpected movement,
turn "OFF" the traction (draft)
control before attaching the
implement to the hitch.
WARNING
4. Detach the center link from the x-
ing bracket.
5. Attach the center link to the top
mast of the implement.
6. Adjust the length of the center link
and lower link if required.
(1) Center link (2) Fixing bracket
IMPORTANT
•
Do not extend the center link
excessively out of the lim-
it. The center link's body or
thread can be damaged.
ADJUSTMENT OF CHECK BAR
1. For implements such as a plow
and disc harrow, adjust the length
so that it can be moved for 5 - 6
cm sideways.
2. For implements such as a rotary
tiller and mower, adjust the length
so that it cannot be swayed side-
ways.
(1) Check bar
2024h_3026h.indb 282024h_3026h.indb 28 2020-09-18 오후 6:17:272020-09-18 오후 6:17:27
5
-
29
OPERATION
5
INSTALLATION OF PTO DRIVEN
IMPLEMENT
1. Attach the implement to the trac-
tor.
2. Lift the implement o the ground.
3. Stop the engine and put the PTO
shift lever in the neutral position.
4. After opening the PTO cover, con-
nect the universal joint shaft while
turning the PTO shaft by hand so
as to align the splines.
5. To check the PTO shaft is se-
cured, check if the pin is returned
to the original position by pulling
the universal joint shaft.
6. Close the PTO cover.
7. Adjust the PTO shift lever accord-
ing to the working speed.
8. Check if the safety shields are in
place and working environment is
normal. If the master safety shield
is not installed, do not operate the
PTO. Stop the engine to check the
PTO shaft and its guards Repair
or lubricate if required.
9. The PTO shaft should not be inter-
fered by any surrounding parts.
8. Check if the safety shields are in
place and working environment is
normal. If the master safety shield
is not installed, do not operate the
PTO. Stop the engine to check the
PTO shaft and its guards Repair
or lubricate if required.
9. The PTO shaft should not be inter-
fered by any surrounding parts.
CAUTION
•
If someone is entangled in the
rotating part, it can cause a fa-
tal injury. Always wear protec-
tive gear and install the safety
shields and guards to the drive
line. Don’t wear loose clothing.
•
Do not remove the installed
protective cover of the PTO
drive shaft without permission.
If working with this protective
cover removed, it can cause
a severe injury. Refer to the
warning decal on the cover.
2024h_3026h.indb 292024h_3026h.indb 29 2020-09-18 오후 6:17:272020-09-18 오후 6:17:27
5
-
30
BAD BOY TRACTOR
CYLINDER HOSE CONNECTION
1. Make sure to use the correct hos-
es for expansion and retraction. The
expanding hose must be connect-
ed to the left coupler. The retracting
hose must be connected to the right
coupler.
2. Remove the dust cap from the end
of the hose.
3. Slide the coupler cap.
4. Make sure the end of the hose and
the coupler are clean. Insert the
hose tip correctly into the coupler.
Pull the hose once to make sure the
hose is correctly inserted into the
coupler.
5. When connecting an external hy-
draulic hose, be careful not to let
foreign substances enter. Be sure to
clean the connector and assemble it
in a clean state.
CAUTION
•
High pressure oil leaking un-
der pressure can penetrate the
skin and cause severe wounds.
Avoid danger by reducing
pressure before disconnecting
hydraulic or other wires. Tight-
en all connections before ap-
plying pressure.
•
To check for leakage, use a
piece of cardboard and protect
your hands and feet from the
pressurized uid.
•
Get medical attention immedi-
ately in case of accident. Flu-
ids injected into the skin may
rot if not removed surgically
within a few hours.
•
External hydraulic hoses can
be damaged by physical dam-
age, aging and explosion.
Check the hoses regularly. If
the hose is damaged, replace it
immediately.
2024h_3026h.indb 302024h_3026h.indb 30 2020-09-18 오후 6:17:272020-09-18 오후 6:17:27
5
-
31
OPERATION
5
PRECAUTIONS FOR CONNECTING THE IMPLEMENT
•
When the PTO shaft is not in
use, ax the safety cover on it.
[Otherwise]
There is a risk of getting entan-
gled in the tractor or injured.
WARNING
1. When engaging or disengaging
the implement by moving the trac-
tor, make sure that no one is al-
lowed around the tractor or be-
tween the implement and the trac-
tor.
2. Engage or disengage the imple-
ment on a flat and safe place.
Supply proper lighting at all times
and especially at night.
3. When engaging a heavy imple-
ment, load the weight on the front
to keep the balance of the tractor.
4. When adjusting the implement,
apply the parking brake, switch o
the engine, and confirm that the
PTO lever is on the “OFF” posi-
tion.
5. When towing something, make
sure to use the draw-bar.
6. Increase the wheel tread on a
slope or when towing.
7. Depending on the implement, the
overall length may become very
long. Pay particular attention to
people or objects nearby when
making a turn.
8. Do not substitute the balance
weight with a person or anything
else. Always use the recommend-
ed balance weight.
9. For front loader work, mount an
implement on the rear to keep the
balance of the tractor.
10. Read the instruction manual
of the implement mounted to the
tractor.
2024h_3026h.indb 312024h_3026h.indb 31 2020-09-18 오후 6:17:272020-09-18 오후 6:17:27
5
-
32
BAD BOY TRACTOR
PRECAUTIONS FOR HANDLING IMPLEMENT
ROTAVATOR
▶
Safety precautions for rotavator
● Never remove the safety cover of
the rotavator.
● Do not remove the PTO shaft cov-
er and safety cover on the univer-
sal joint.
● When adjusting each part, disen-
gage the PTO and stop the engine
in advance.
● When driving on a road, keep the
PTO disengaged. Also, keep the
rotavator lowered on a road as
long as it does not hit the ground.
● For the universal joint, its inner
shaft and outer shaft should be
overlapped at least 15 cm.
● Check that the universal joint is
rmly xed to the tractor and rota-
vator shaft.
•
Read instructions on warn-
ing decals on each implement
thoroughly before work.
•
To avoid an injury due to mis-
handling of an implement,
read the user’s manual of the
implement thoroughly and
work safely and precisely with
caution.
•
Installation of an improper im-
plement can lead to an injury.
Install only implements speci-
ed by the Manufacturer.
WARNING
1. When driving the tractor to attach
or detach an implement, make
sure that there is no one in be-
tween or around the tractor and
implement.
2. Install and remove the implement
only on safe and level ground.
3. When engaging a heavy imple-
ment, load the weight on the front
to keep the balance of the tractor.
4. When adjusting an implement, ap-
ply the parking brake, stop the en-
gine and set the PTO switch in the
OFF position in advance.
5. To tow anything, use the towing-
hitch only.
2024h_3026h.indb 322024h_3026h.indb 32 2020-09-18 오후 6:17:272020-09-18 오후 6:17:27
5
-
33
OPERATION
5
EFFECTIVE PLOWING PATTERN
▶
Safety precautions for rotavator
● This pattern can be useful in a
well-planned eld in a good condi-
tion.
● The border shown in the gure is
the effective plowing width of the
rotavator and should be set a little
narrower than three times of one
plowing width.
● The starting point is the ending
point.
● Plow in a sequential pattern from
(1) to (6) and in a circular pattern
from (7) to (18).
● When driving forward to plow,
have the bank on the right side.
● Be careful not to press al-
ready-plowed soil with the wheels.
Moving direction
Moving direction
●
Turning:
Turning:
Finish
Finish
A: Border
A: Border
Start
Start
(9)
(9)
(13)
(13)
(17)
(17)
(1)
(1)
(2)
(2)
(3)
(3)
(4)
(4)
(5)
(5)
(6)
(6)
(15)
(15)
(11)
(11)
(7)
(7)
(10)
(10)
(14)
(14)
(18)
(18)
(16)
(16)
(12)
(12)
A
A
(8)
(8)
Reverse driving
Reverse driving
2024h_3026h.indb 332024h_3026h.indb 33 2020-09-18 오후 6:17:272020-09-18 오후 6:17:27
5
-
34
BAD BOY TRACTOR
▶
Alternating returning plowing
pattern
● This pattern is useful for narrow
or short fields or poorly planned
elds in which are not easy to turn.
● In the gure, the plowing width for
(1), (2), (3) and (4) should be over-
lapped with the one for (5), (6) and
(7) for approx. 10 cm.
● For the sections (1) to (7), perform
plowing in an alternating pattern.
For the sections (8) to (19), plow
in a circular pattern.
● Refer to the sequential returning
pattern for other details.
Moving direction
Moving direction
Reverse driving
Reverse driving
Finish
Finish
A: Border
A: Border
A
A
Start
Start
(9)
(9)
(13)
(13)
(17)
(17)
(19)
(19)
(15)
(15)
(11)
(11)
(18)
(18)
(8)
(8)
(12)
(12)
(16)
(16)
(1)
(1)
(7)
(7)
(2)
(2)
(6)
(6)
(3)
(3)
(5)
(5)
(4)
(4)
(14)
(14)
(10)
(10)
●
Turning:
Turning:
2024h_3026h.indb 342024h_3026h.indb 34 2020-09-18 오후 6:17:282020-09-18 오후 6:17:28
5
-
35
OPERATION
5
▶
Land leveling pattern
● The land leveling work may be
performed after crushing soil or
not.
● The vehicle speed can be set fast-
er when performing the land level-
ing work with soil crushed already.
● When working in a wet field, fill
the eld with a sucient amount of
water so that the trace of plowing
cannot be seen.
● The border shown in the figure
should be set a little narrower than
two times of one plowing width.
● Refer to the alternating returning
pattern for other details.
Moving direction
Moving direction
Reverse driving
Reverse driving
Finish
Finish
A: Border
A: Border
Start
Start
(15)
(15)
(11)
(11)
(9)
(9)
(13)
(13)
A
A
(14)
(14)
(10)
(10)
(4)
(4)
(5)
(5)
(3)
(3)
(6)
(6)
(2)
(2)
(7)
(7)
(1)
(1)
(8)
(8)
(12)
(12)
●
Turning:
Turning:
2024h_3026h.indb 352024h_3026h.indb 35 2020-09-18 오후 6:17:282020-09-18 오후 6:17:28
5
-
36
BAD BOY TRACTOR
ADJUSTING WHEEL TREAD
Adjust the wheel tread depending on
the type and condition of the work.
Also, increase the wheel tread when
working on a slope or towing.
1. Pull the parking brake, block
the front wheels, and raise the
body with a jack to make the rear
wheels separate from the ground.
2. Be sure to make adjustments al-
ternatively between the left and
right wheels.
DESCRIPTION TIGHTENING TORQUE
FRONTWHEEL Bolts on wheels and axle 130 (18 kgf.m)~ 152 lb-ft (21 kgf.m)
REAR WHEEL
Bolts on wheels and axle 130 (18 kgf.m)~ 152 lb-ft (21 kgf.m)
Bolts on rim and disk of wheels 188 (26 kgf.m)~ 224 lb-ft (31 kgf.m)
►TIGHTENING TORQUE
•
When changing tires, please
use a hoist or strong sup-
port and make sure the tractor
does not move.
[Otherwise]
There is a risk of death or injury.
WARNING
2024h_3026h.indb 362024h_3026h.indb 36 2020-09-18 오후 6:17:282020-09-18 오후 6:17:28
5
-
37
OPERATION
5
TIRES, WHEELS AND BALLAST
TIRE TYPE
Though the tire pressure is factory
set to the prescribed level, it naturally
drops slowly in the course of time.
Thus, check it everyday and inflate
as necessary.
(1) Tire (2) Wheel nut
(3) Rim
WHEEL AND AXLE
If the wheel or axle is loosened, tighten
to the specied torque.
1. Dr
ive the tractor about 110 yds
(100 m) and tighten it to the
specified torque.
2. Inspect the wheel and axle every
10 hours of engine run or every 3
hours of working.
3. Inspect all wheels and axles fre-
quently and securely tighten if nec-
essary.
CAUTION
•
Never operate the tractor with
a loose rim, wheel, hub or axle.
•
When operating a new tractor
or when removing the wheel,
follow the procedures above.
NOTE
POWER STEERING
•
Pay attention to the steering
wheels while driving, because
it can be very lightly manipu-
lated when the engine is run-
ning.
•
Power steering will run only
when engine is running. When
engine is idling, power steer-
ing may feel a little heavy.
•
If the wheels are steered to the
maximum, the relief valve is
opened and a warning sound
will be made. Do not continue
to operate the tractor with the
warning sound.
•
Do not steer the wheels un-
necessarily, because steering
the wheel without moving will
attribute to early wear of tires
and rims.
CAUTION
2024h_3026h.indb 372024h_3026h.indb 37 2020-09-18 오후 6:17:282020-09-18 오후 6:17:28
5
-
38
BAD BOY TRACTOR
TOWING INSTRUCTIONS
1. Tractor traction should be conduct-
ed in short distance. (For instance,
from inside to outside)
2. Long distance towing is not al-
lowed in trac congestion.
3. In case tractor needs to tow, use
strong and safe checked chain.
4. Traction must be conducted from
the rear in usage of tow bar, tow
hook and 3-point linkage.
5. When driver turns the handle, use
the brake if necessary.
6. During traction, the transmission
and other parts, are not being lu-
bricated but rotating. In order to
prevent breakage, please note the
following:
7. Towing should be in short dis-
tance.
8. Traction speed is restricted to less
8 km/h.
9. If possible, start the engine in or-
der to make the power steering lu-
bricated.
10. Place the main gearshift and sub
gearshift in neutral.
PTO SPECIFICATIONS &
PRECAUTIONS
Wear close fitting clothing. Stop the
engine and be sure that PTO drive-
line is stopped before making adjust-
ments, connections, or cleaning out
PTO driven equipment.
Do not install any adapter device that
results in a portion of the rotating im-
plement shaft, tractor shaft, or the
adapter to be unguarded. The trac-
tor master shield should overlap the
end of the splined shaft and the add-
ed adaptor device as outlined in the
table.
2024h_3026h.indb 382024h_3026h.indb 38 2020-09-18 오후 6:17:282020-09-18 오후 6:17:28
5
-
39
OPERATION
5
PTO
Type
Diameter Splines
n ± 0.2
in.
(n ± 5 mm )
1
1.378 in.
(35 mm)
6
3.81 in
(97 mm)
LOADER OPERATION
Work with front-end loader. (Risk of
falling objects)
•
Avoid contact with electrical
power lines by loader or at-
tachments.
•
Do not lift or carry anyone in
the bucket or on any other po-
sition of loader attachment.
•
Inadvertent movement of the
loader or attachment could re-
sult in serious injury or death
from falling or crushing.
WARNING
2024h_3026h.indb 392024h_3026h.indb 39 2020-09-18 오후 6:17:282020-09-18 오후 6:17:28
5
-
40
BAD BOY TRACTOR
•
Make sure material in buck-
et cannot roll out and down on
tractor when bucket is raised
to full height.
•
Keep clear of overhead ob-
structions such as trees, limbs
or power lines when raising
bucket.
•
When lifting the load, keep the
bucket positioned to avoid
spillage.
CAUTION
1. Position the bucket just below the
level of the tractor hood for maxi-
mum stability and visibility, wheth-
er the bucket is loaded or empty.
2. Use extreme caution when oper-
ating the loader on a slope, keep
the bucket as low as possible, this
keeps the bucket and tractor cen-
ter of gravity low and will provide
maximum tractor stability.
CARRYING THE LOAD
•
Operating the loader on a hill-
side is dangerous. extreme
care is recommended.
CAUTION
2024h_3026h.indb 402024h_3026h.indb 40 2020-09-18 오후 6:17:292020-09-18 오후 6:17:29
5
-
41
OPERATION
5
DO THIS
NOT THIS
DO THIS
DO THIS
NOT THIS
NOT THIS
When transporting the load, keep the bucket as low as possible to avoid tipping,
in case a wheel drops in a rut.
DO THIS
NOT THIS
D
O
THI
S
N
O
T THI
S
HANDLING LARGE HEAVY
OBJECTS
•
When transporting the load,
keep the bucket as low as pos-
sible to resist tipping, in case
a wheel drops in a rut. This
will avoid tipping and possible
injury.
CAUTION
•
Do not use front end loaders
for handling large, heavy ob-
jects such as large, round or
rectangular bales, logs and oil
drums.
•
Handling large heavy objects
can be extremely dangerous
due to.
1. Possibility of rolling the trac-
tor over.
2. Possibility of upending the
tractor.
3. Possibility of the object roll-
ing or sliding down the load-
er arms onto the operator.
WARNING
DO THIS
NOT THIS
NOT THIS
DO THIS
2024h_3026h.indb 412024h_3026h.indb 41 2020-09-18 오후 6:17:292020-09-18 오후 6:17:29
5
-
42
BAD BOY TRACTOR
ROPS FOLDING METHOD
HOW TO FOLD DOWN THE ROPS
1. Turn the handle to separate the
push plate and the ROPS.
2. Pull the pins on both sides of the
tractor and turn them about 1/4
turns to release the lock of the
ROPS.
3. Raise the ROPS a little.
4. Replace the pin.
5. Fold down the ROPS, and the pins
will lock into place.
※ If it is not certain whether the pins
are xed, shake the frame a little
bit to x the pins for sure.
Raise the safety frame.
Pull the pins on both
sides and turn them
about 1/4 turns.
Replace
the pins.
•
Don’t fasten your seat belt af-
ter folding ROPS.
•
When you drive tractor, fold
up vertically.
•
Fasten your seat belt after
folding up ROPS.
•
When working with the tractor,
don’t fold down ROPS.
•
Don’t change ROPS without
authority.
•
Before using tractor, check
your ROPS support and other
parts.
•
If there is damage to the
ROPS, change ROPS at once.
[Otherwise]
If the tractor rolls over, you
could be injured or death may
occur.
※ ROPS are a very important
structure for protection on
roll over, always check your
ROPS.
CAUTION
1. Pull the pins on both sides of the
tractor and turn them about 1/4
turns to release the lock of the
ROPS.
2. Raise the ROPS a little.
3. Replace the pins.
4. Stand the ROPS up, and the pins
will lock into place.
※ If it is not certain whether the pins
are xed, shake the ROPS a little
bit to x the pins for sure.
5. Turn the handle to fix the push
plate and the frame.
HOW TO STAND UP THE ROPS
2024h_3026h.indb 422024h_3026h.indb 42 2020-09-18 오후 6:17:292020-09-18 오후 6:17:29
6
6. MAINTENANCE
MAINTENANCE SCHEDULE CHART.................6-2
OIL, GREASE AND ANTI-FREEZE CHART .......6-4
FUEL, OIL AND COOLANT CHART ...................6-5
OPENING HOOD ...................................................6-6
CHECKING AND CHANGING OILS ....................6-6
ENGINE OIL ............................................................. 6-6
TRANSMISSION OIL .............................................. 6-7
FRONT AXLE FLIUD ............................................... 6-8
FILTERS / COOLANT REPLACEMENT .............6-9
ENGINE OIL FILTER ............................................... 6-9
TRANSMISSION OIL FILTER .............................. 6-10
FUEL FILTER ......................................................... 6-10
DRAINING AIR IN FUEL LINE .............................. 6-11
COOLANT............................................................... 6-12
ANTI-FREEZE ........................................................ 6-13
OTHERS ...............................................................6-14
RADIATOR SCREEN & AIR CLEANER ELEMENT
....... 6-14
BATTERY ................................................................ 6-15
GREASING ............................................................. 6-16
STEERING WHEEL ............................................... 6-16
BRAKE .................................................................... 6-17
FAN BELT ............................................................... 6-18
TOE-IN .................................................................... 6-18
FUSE & FUSIBLE LINKS ...................................... 6-19
COLOR OF EXHAUST GAS ................................. 6-20
TIRES...................................................................... 6-20
2024h_3026h.indb 12024h_3026h.indb 1 2020-09-18 오후 6:17:292020-09-18 오후 6:17:29
6
-
2
BAD BOY TRACTOR
MAINTENANCE SCHEDULE CHART
RUNNING HOURS
CHECK ITEMS
50 100 150 200 250 300 350 400 450 500 550 600 650 700 1YR 2YR
1. Engine oil
⊙ ▲ ▲
2. Engine oil lter
⊙ ▲ ▲
3. Transmission oil
⊙ ▲ ▲
4. Transmission oil lter
⊙ ▲ ▲
5. Front axle oil
⊙ ▲ ▲
6. Radiator cleaning At the time the coolant is replaced
7. Fuel oil lter and element
● ● ● ● ● ● ●
▲ ▲
8. Coolant Check before every work (Replace every year)
9. Air cleaner element
⊙ ⊙ ⊙ ⊙ ⊙ ⊙ ⊙ ⊙ ⊙ ⊙ ⊙ ⊙ ⊙
▲
10. Fan and radiator cleaning
⊙ ⊙ ⊙ ⊙ ⊙ ⊙ ⊙ ⊙ ⊙ ⊙ ⊙ ⊙ ⊙ ⊙
11. Battery solution Replace every two years
12. Battery (specic gravity)
● ● ● ● ● ● ●
13. Fuel pipe and connection
● ● ● ● ● ● ● ● ● ● ● ● ● ●
▲
14. Steering wheel hose
● ● ● ● ● ● ● ● ● ● ● ● ● ●
▲
15. Radiator hose
● ● ●
▲
Meanings of symbols=
▲
: Replace
: Check
: Adjust
⊙
: Clean
2024h_3026h.indb 22024h_3026h.indb 2 2020-09-18 오후 6:17:292020-09-18 오후 6:17:29
6
-
3
MAINTENANCE
6
RUNNING HOURS
CHECK ITEMS
50 100 150 200 250 300 350 400 450 500 550 600 650 700 1YR 2YR
16. Hydraulic oil hose
● ● ● ● ● ● ●
▲
17. Fuel hose
● ● ● ● ● ● ●
▲
18. Electric cables
● ● ● ● ● ● ● ● ● ● ● ● ● ●
19. Greasing
● ● ● ● ● ● ● ● ● ● ● ● ● ●
20. Tightening handles
● ● ● ● ● ●
21. Tightening bolts & Nuts
● ● ● ● ● ● ● ●
22. Cooling fan belt
23. Clutch
24. Brake
25. Engine breed pipe
● ● ● ● ● ● ● ●
26. Engine crankcase
cleaning
⊙ ⊙
27. Intake/exhaust
gas valves
●
28. Fuel injection valve
●
29. Generator motor
● ● ● ●
30. Hydraulic system
● ● ● ●
※
Meanings of symbols=
▲
: Replace
: Check
: Adjust
⊙
: Clean
※
Inspection should be done every 50 hours. If the tractor is not used much, inspect every year.
※
Replace parts every two years regardless of running hours.
2024h_3026h.indb 32024h_3026h.indb 3 2020-09-18 오후 6:17:292020-09-18 오후 6:17:29
6
-
4
BAD BOY TRACTOR
OIL, GREASE AND ANTI-FREEZE CHART
NO ITEM TYPE REMARK
1 Fuel Diesel (Summer : S, Winter : W)
Use winter diesel when tempera-
ture in below 50°F
2 Engine oil SAE 10W-40 CG Above
3 Grease
Arctic Grease Below 14°F (-10°C)
SAE (NLGI) #0, #1 32~-22°F (0~-30°C)
SAE (NLGI) #2 32~122°F (0~50°C)
4 Coolant Anti - Freeze
ASTM D4985
Extended Lift antifreeze
5
Transmission / Steering/Front
axle oil
BAD BOY Origin Oil
Texaco TDH oil, 1893
6 Front axle oil SAE 80W-90
2024h_3026h.indb 42024h_3026h.indb 4 2020-09-18 오후 6:17:292020-09-18 오후 6:17:29
6
-
5
MAINTENANCE
6
FUEL, OIL AND COOLANT CHART
NO ITEM
CAPACITY
2024H 3026H
1 Fuel 6.08 gal (23 L) 6.08 gal (23 L)
2 Engine oil 0.79 gal (3.0 L) 0.79 gal (3.0 L)
3 Coolant 1.21 gal (4.6 L) 1.21 gal (4.6 L)
4 Transmission / Hyd oil 2.64 gal (13 L) 2.90 gal (13 L)
5 Front axle 0.79 gal (3.0 L) 0.79 gal (3.0 L)
•
Above listed fuel, oil and coolant table is only for initial lling, and may be reduced at the time of replace.
IMPORTANT
2024h_3026h.indb 52024h_3026h.indb 5 2020-09-18 오후 6:17:292020-09-18 오후 6:17:29
6
-
6
BAD BOY TRACTOR
OPENING HOOD CHECKING AND CHANG-
ING OILS
Do not dispose of waste oils in the
sewage system, and take appropri-
ate measures such as contacting a
waste oil disposal specialists.
ENGINE OIL
►CHECKING OIL
Pull out the dipstick, clean the tip of
dipstick, put it back into the engine,
and pull it out again to see if the oil
level is between the upper and lower
limit. If the oil level is below the lower
limit, add oil.
1. The hood can be unlocked by pull-
ingthe opening lever.
2. Slightly lift the hood with both
hands and the hood is automati-
cally lifted by the gas spring.
3. To close the hood, press its front
down slightly until a “click” sound
is heard.
4. After closing the hood, lift it to check
that the hood is securely xed.
•
Never fill the fuel tank when
the engine is running or hot.
[Otherwise]
There is a danger of re.
DANGER
•
Do not change the oil right af-
ter stopping the engine.
[Otherwise]
There is a danger of getting
burnt.
CAUTION
(1) Engine Oil Filler(1) Opening lever
2024h_3026h.indb 62024h_3026h.indb 6 2020-09-18 오후 6:17:302020-09-18 오후 6:17:30
6
-
7
MAINTENANCE
6
►CHANGING OIL
Drain the oil by removing the plug un-
der the engine. Put new oil through
the engine oil ller hole. Change the
oil periodically, and select the right
type of oil depending on the tem-
perature and usage.
TRANSMISSION OIL
►CHECKING
Check the uid level through the in-
spection window at the rear side of
the transmission compartment. The
level should be within sight through
the inspection gauge. If the uid level
is below proper level, add uid
•
Drain the oil when oil is warm
but be careful. If oil is hot,
there is a risk of getting burnt.
CAUTION
(1) Drain Plug
•
Check the oil level before the
engine is started or after the
engine is cooled down.
CAUTION
(1) Dipstick
(A) Upper Limit (B) Lower Limit
(1) Inspection Gauge
2024h_3026h.indb 72024h_3026h.indb 7 2020-09-18 오후 6:17:302020-09-18 오후 6:17:30
6
-
8
BAD BOY TRACTOR
►CHANGE OF FLUID
Drain the fluid through the drain
holes under the rear axle case and
rear axle housing. Supply the fluid
through the ller hole behind the hy-
draulic case.
1. Transmission oil can be used for
the hydraulic system and for the
power steering unit.
2. Make sure to the genuine BAD
BOY transmission uid.
(1) Drain Plug
•
Drain the oil when oil is warm
but be careful. If oil is hot,
there is a risk of getting burnt.
CAUTION
FRONT AXLE FLIUD
►CHECKING OIL
Open the uid ller cap on the upper
right side of the front axle, clean the
tip of the gauge, dip the cap without
screwing in, and take it out again to
read the uid level. Re ll the uid as
necessary, and also check for leaks.
(1) Front Axle Oil Filler
1
1
1
1
2024h_3026h.indb 82024h_3026h.indb 8 2020-09-18 오후 6:17:302020-09-18 오후 6:17:30
6
-
9
MAINTENANCE
6
FILTERS / COOLANT REPLACEMENT
ENGINE OIL FILTER
FRONT AXLE FLIUD
(1) Engine Oil Filter
Replace it every 300 hours or when
engine oil is changed.
•
First 50 hours, lter has to be
changed.
NOTE
►REPLACEMENT
1. After draining the engine oil, turn
the cartridge to the left with the l-
ter wrench.
2. Apply a thin lm of oil over the rub-
ber ring on the bottom of the new
cartridge and attach the new lter
securely.
3. After changing the engine oil, start
the engine and run it until the en-
gine oil pressure warning lamp is
turned o .
4. After the oil pressure warning
lamp is turned off, check the oil
level again. Add oil as necessary.
►CHANGING OIL
Drain the fluid through three drain
holes under the front axle.
Refill the fluid from the upper right
side of the front axle
(1) Drain Plug
2024h_3026h.indb 92024h_3026h.indb 9 2020-09-18 오후 6:17:302020-09-18 오후 6:17:30
6
-
10
BAD BOY TRACTOR
TRANSMISSION OIL FILTER
The lter is a cartridge type.
•
First 50 hours, lter has to be
changed.
NOTE
(1) Transmission Oil Filter
►REPLACEMENT
1. After draining the transmission u-
id, turn the cartridge to the left to
take it out.
2. Apply a thin film of fluid over the
rubber ring on the bottom of the
new cartridge and attach the new
lter securely.
3. After changing the transmission
fluid, start the engine to circulate
the uid and then stop the engine.
Check the uid level at dipstick on
left axle housing and add uid as
necessary.
FUEL FILTER
(1) Fuel Filter
(A) Open (B) Close
Cleaning and replacement of fuel l-
ter element
1. Put the fuel cock to “B” position
2. Take out the lter and remove wa-
ter and dust inside the lter.
3. After cleaning the lter, replace it
and put the fuel cock to “A” posi-
tion. Remove the air.
4. Replace the lter element.
1
1
2024h_3026h.indb 102024h_3026h.indb 10 2020-09-18 오후 6:17:302020-09-18 오후 6:17:30
6
-
11
MAINTENANCE
6
DRAINING AIR IN FUEL LINE
Drain the air from the fuel tank, fuel
lter, and fuel lter element when the
engine stops as the fuel runs out or
during maintenance
1. Re ll fuel to fuel tank.
2. Put the fuel lter valve to “OPEN.”
3. Put the throttle lever to MAX and
the key switch to START to run the
starting motor for about 10 sec-
onds. That completes the proce-
dure.
•
If air is not removed, then
there will be air in the fuel
lines. Please check fuel lines
for leakage or breakage.
NOTE
Throttle lever
to Max.
Pull reducer lever, put
main switch to START
for 10 seconds.
2024h_3026h.indb 112024h_3026h.indb 11 2020-09-18 오후 6:17:302020-09-18 오후 6:17:30
6
-
12
BAD BOY TRACTOR
►REPLACEMENT
1. Open the radiator cap and the
drain plug to completely drain the
water from the radiator.
2. Rinse the radiator with tap water
until no dirt or rust comes out.
※
For better results, fill the radia-
tor with water mixed with radiator
flush, run the engine for over 15
minutes, and drain the water solu-
tion
3. Assemble the drain plug, add an-
ti-freeze and fill the radiator with
tap water.
4. Assemble the radiator cap and run
the engine to mix the anti-freeze
and water.
•
Do not open the radiator
cap while the engine is run-
ning or right after the engine
is stopped. Open the radia-
tor cap only after the engine
is stopped and fully cooled
down.
[Otherwise]
Hot water will splash and may
cause burn injury
DANGER
COOLANT
►CHECKING
Open the engine hood and the side
cover and see if the water level in the
reservoir is between the upper and
lower limit. Add clean water as nec-
essary.
(1) Radiator Cap
2024h_3026h.indb 122024h_3026h.indb 12 2020-09-18 오후 6:17:312020-09-18 오후 6:17:31
6
-
13
MAINTENANCE
6
ANTI-FREEZE
The anti-freeze is lowering the freez-
ing temperature of water. The tractor
is lled with appropriate genuine an-
ti-freeze at factory.
(1) Anti-freeze reservoir tank
(A) FULL (B) LOW
CAUTION
•
When changing with new cool-
ant, add anti-rust agent and
idle the engine for 5 minutes
for mixing.
•
As the coolant level is re-
duced naturally, ll with clean
and fresh water.
•
The expiration date on an-
ti-freeze is 1 year. Make sure
to change it every year.
2024h_3026h.indb 132024h_3026h.indb 13 2020-09-18 오후 6:17:312020-09-18 오후 6:17:31
6
-
14
BAD BOY TRACTOR
OTHERS
RADIATOR SCREEN & AIR CLEANER ELEMENT
►CLEANING OF RADIATOR SCREEN
Unscrew the butterfly bolt, pull up
the radiator screen to take it out. Re-
move straw and dust. Clean it before
and after working.
The Air cleaner removes the dust
mixed in the intake air, thereby pre-
venting abrasion of cylinder liners
and piston rings to keep the engine
in good condition. When working in
dusty environments, clean the air l-
ter every 50 hours and replace it ev-
ery 400 hours.
In normal working environments,
clean the air filter every 100 hours
and replace it every 1,000 hours. If
the running hours are shorter, re-
place the element after one year.
►CLEANING OF AIR CLEANER
Open the cover and take out the ele-
ment. Blow air inside the element or
shake it to take the dust o the ele-
ment. Be careful to avoid damage to
the pins.
(1) Air Cleaner (1) Radiator Screen
1
1
2024h_3026h.indb 142024h_3026h.indb 14 2020-09-18 오후 6:17:312020-09-18 오후 6:17:31
6
-
15
MAINTENANCE
6
BATTERY
1. When replacing the battery, make
sure to install the battery of the
same capacity as designated in
the instruction manual.
2. To preserve the environment and
to recycle resources, do not dis-
card the old battery and hand it
over to the battery dealer for prop-
er disposal.
(1) Battery
•
Avoid heat when checking or
charging the battery.
[Otherwise]
The battery may explode and
cause burns or other injury.
DANGER
•
When connecting the battery
cable, connect the (+) terminal
rst. When disconnecting the
cable, disconnect the (-) termi-
nal rst.
[Otherwise]
There is a risk of getting burnt
due to shorting of the battery.
CAUTION
1
1
2024h_3026h.indb 152024h_3026h.indb 15 2020-09-18 오후 6:17:312020-09-18 오후 6:17:31
6
-
16
BAD BOY TRACTOR
GREASING
Apply grease every 50 hours. Check the relevant parts before starting work
everyday and add grease as necessary. After working on a watered farm,
make sure to apply grease to the tractor.
(1) Front Axle Support (1) Tie Rod LH / RH
(1) Lift Link (R) (1) Lift Link (L)
1
1
1
1
1
1
STEERING WHEEL
When the steering wheel is turned
lightly, there should be free play
0.8~2.0 in. If the extent of the free
play exceeds this range, the steer-
ing wheel may feel heavy or the trac-
tor may not move straight. If the free
play is not normal, have it fixed at
your nearest authorized dealer.
(1) Steering Handle
(A) Free Play : 0.8~ 2.0 in (20.3 ~50.8 mm)
2024h_3026h.indb 162024h_3026h.indb 16 2020-09-18 오후 6:17:322020-09-18 오후 6:17:32
6
-
17
MAINTENANCE
6
•
Make sure that the steering
wheel does not vibrate severe-
ly or has enough free play.
[Otherwise]
there is a risk or accident.
WARNING
•
Check the brakes to avoid
one-sided braking. Otherwise,
there is a risk of accident.
•
If the extent of free play is dif-
ferent between the two brakes
pedals, one-sided braking will
occur. Make sure that the free
play of both brake pedals is
the same.
WARNING
BRAKE
(1) Brake Pedal
Free Play : 1.2 in~ 1.5 in (30~40 mm)
• In this case, the free play of
the brake pedal is 1.2~1.5 in
(30~40mm).
• Adjust both of the brake pedals.
2024h_3026h.indb 172024h_3026h.indb 17 2020-09-18 오후 6:17:322020-09-18 오후 6:17:32
6
-
18
BAD BOY TRACTOR
FAN BELT
Open the engine hood and press the
middle of fan belt with finger to see
if the belt sags about 0.4~0.6 in or
if there is any damage to the belt. If
the sagging is not correct, loosen the
generator bolt and move the gener-
ator to adjust the tension of the fan
belt. If the fan belt still slips after the
generator is moved to the maximum,
replace the belt with a new one.
New belts must be inspected after 50
hours of use.
(1) Fan Belt
•
Carry out inspection or main-
tenance after the engine is ful-
ly cooled down.
[Otherwise]
There is a risk of getting burnt.
CAUTION
B
A
► CHECKING
If the toe-in is not properly aligned,
the steering wheel may be uncon-
trollable or the tractor may produce
an abnormal vibration. Measure the
distance A and the distance B of the
front wheels and see if the different
between the two measurements is
0.16~0.3 in (4~8 mm).
A
B
F
R
(F) Front (R) Rear
TOE-IN
2024h_3026h.indb 182024h_3026h.indb 18 2020-09-18 오후 6:17:322020-09-18 오후 6:17:32
6
-
19
MAINTENANCE
6
► ADJUSTING
If not, loosen nuts at the end of the
cylinder rod on both sides and adjust
the length of the screws. Tighten the
nuts when the toe-in is 0.16~0.3 in
(4~8 mm).
Left and right adjustment of screw
length must be same.
(1) Tie Rod Nut (2) Cylinder Rod
2
2
1
1
FUSE & FUSIBLE LINKS
(1) Fusible Links
Stop the engine and check the main
fuse. (Fusible link)
Open the fuse box cover and check
the fuses. Replace any burnt-out fuses
with new ones of required capacity.
A fusible link is a type of fuse, which
burns and disconnects the current in
the event of excessive current owing
in the circuit , if plastic coating is dis-
colored when it is cut o , it should be
inspected by a authorized dealer.
•
When replacing the fuse, use
only the one of the same ca-
pacity.
WARNING
If the fuse burns immediately after
being replaced, it must be checked
by the authorized dealer.
2024h_3026h.indb 192024h_3026h.indb 19 2020-09-18 오후 6:17:322020-09-18 오후 6:17:32
6
-
20
BAD BOY TRACTOR
COLOR OF EXHAUST GAS
The exhaust gas may be a little black
at the time of starting the engine, but
normally its color is clear.
• Black – Incomplete combustion
due to too much fuel in-
take.
• White – Misfiring or cold tempera-
ture.
• Blue – Burning of engine oil
If the color of the exhaust gas remains
black or white during operation, have
the tractor inspected at your nearest
authorized dealer.
TIRES
High Low
Adjust air pressure in front and rear
tires to standard pressure.
Also, check if there are any cracks
on the tires.
When front wheels are put un-
der a load of the front weights or a
front loader, air pressure in the front
wheels must be adjusted to the max-
imum in the chart as followed.
►AIR PRESSURE IN TIRES
Air pressure(psi)
BAD BOY
Rear
9.5 - 16 6PR 30
11.2 - 20 8PR 34
33X12.5 - 16.5 4PR 30
12 - 16.5 6PR 40
Front
6 - 12,4PR 28
7-16 6PR 37
23X8.50 - 12, 4PR 22
23X8.50 - 12, 6PR 35
►TORQUE OF WHEEL BOLTS
Type Torque (lb-ft)
Front wheel 75 ~ 87
Rear wheel 192 ~ 224
2024h_3026h.indb 202024h_3026h.indb 20 2020-09-18 오후 6:17:322020-09-18 오후 6:17:32
7
7. TROUBLESHOOTING
TROUBLESHOOTING - ENGINE ..........................................................7-2
TROUBLESHOOTING - CLUTCH AND BRAKE ..................................7-5
TROUBLESHOOTING - HYDRAULIC SYSTEM .................................. 7-6
TROUBLESHOOTING - ELECTRICAL SYSTEM ................................7-7
2024h_3026h.indb 12024h_3026h.indb 1 2020-09-18 오후 6:17:332020-09-18 오후 6:17:33
7
-
2
BAD BOY TRACTOR
TROUBLESHOOTING - ENGINE
Symptom Inspection item Action
1. The starter motor
does not start when
the ignition switch is
turned to "START".
Is the clutch depressed?
Depress the clutch pedal fully and turn the igni-
tion switch to the "START" position.
Is the battery discharged?
Charge the battery.
Is the battery terminal loosened or corroded?
Clean and tighten the terminals.
Is the main fuse blown out?
Replace the fuse.
Is the ignition switch broken?
Contact the dealer for repair or replacement.
Is the starter motor damaged?
Contact the dealer for repair or replacement.
2. The starter motor
runs, but the engine
does not start.
Is the fuel tank empty?
Fill up the fuel tank and bleed the system.
Is the fuel mixed with air?
Bleed the fuel system.
3. The engine revolu-
tion is irregular.
Is air mixed in the fuel system?
Bleed the fuel system.
Is water mixed in the fuel?
Drain water and replace fuel.
Is the injection nozzle clogged?
Contact the dealer for repair or replacement.
Is the fuel lter clogged?
Clean or replace it.
2024h_3026h.indb 22024h_3026h.indb 2 2020-09-18 오후 6:17:332020-09-18 오후 6:17:33
7
-
3
TROUBLESHOOTING
7
Symptom Inspection item Action
4. The engine is over-
heated.
Is the coolant level low?
Rell the coolant.
Is the fan belt loosened or damaged?
Adjust the belt tension or replace it.
Is the radiator n clogged?
Clean it.
Is the engine oil level low?
Rell the engine oil.
Is the engine running under overload?
Reduce the load.
5. The engine power is
too weak.
Is the air cleaner clogged?
Inspect the air cleaner and replace the element.
Is the nozzle damaged?
Contact the dealer for repair.
Is the compression force weak?
Contact the dealer for repair.
Is the valve clearance adjusted properly?
Contact the dealer for repair.
Is the injection timing incorrect?
Contact the dealer for repair.
2024h_3026h.indb 32024h_3026h.indb 3 2020-09-18 오후 6:17:332020-09-18 오후 6:17:33
7
-
4
BAD BOY TRACTOR
Symptom Inspection item Action
6. The coolant warning
lamp is turned “ON”
during operation.
Is the coolant level in the reservoir tank low?
Rell the coolant.
7. The engine oil pres-
sure lamp is turned
“ON” during opera-
tion.
Is the engine oil level low?
Rell the engine oil up to required level.
Is the viscosity of the engine oil low?
Replace the engine oil with proper viscosity.
Is the pressure switch defective?
Replace the switch.
Is the oil pump defective?
Contact the dealer for repair.
8. The battery charge
warning lamp is
turned “ON” during
operation.
Is the alternator defective?
Contact the dealer for repair.
Is the fan belt loosened or damaged?
Adjust the fan belt tension or replace it.
2024h_3026h.indb 42024h_3026h.indb 4 2020-09-18 오후 6:17:332020-09-18 오후 6:17:33
7
-
5
TROUBLESHOOTING
7
Symptom Inspection item Action
1. The clutch slips or does not be dis-
engaged.
Is the free play of clutch pedal proper?
Adjust the free play of the pedals.
2. The brake does not work or works
only on one side.
Is the free play of the brake pedals proper?
Adjust the free play of the pedals.
3. The brake pedal does not return to
its original position properly and
it makes a noise.
Is the brake pedal return spring damaged?
Replace the spring.
Is each sliding part well greased?
Remove the rust and apply grease.
TROUBLESHOOTING - CLUTCH AND BRAKE
2024h_3026h.indb 52024h_3026h.indb 5 2020-09-18 오후 6:17:332020-09-18 오후 6:17:33
7
-
6
BAD BOY TRACTOR
Symptom Inspection item Action
1. The implement does not be lifted.
Is the hydraulic ow control dial in the close
position?
Adjust the hydraulic ow control dial.
Is the transmission oil level low?
Rell the transmission oil.
Is the air taken in the uid suction system?
Tighten the lter or connection parts. Re-
place the pipe or O-ring if damaged.
Is the oil lter clogged?
Clean or replace it.
Is the Selective control valve lever in the de-
tent position?
Put the Selective control valve lever in
the neutral position.
Is the hydraulic pump defective?
Contact the dealer for repair.
Is the cylinder damaged?
Contact the dealer for repair.
2. The implement does not be low-
ered.
Is the hydraulic ow control dial in the close
position?
Adjust the hydraulic ow control dial.
Is the position control lever on the lowest po-
sition?
Move the position control lever.
The implement cannot be lowered even
though the position control lever is placed in
the lowest position.
Contact the dealer for repair.
TROUBLESHOOTING - HYDRAULIC SYSTEM
2024h_3026h.indb 62024h_3026h.indb 6 2020-09-18 오후 6:17:332020-09-18 오후 6:17:33
7
-
7
TROUBLESHOOTING
7
Symptom Inspection item Action
1. The headlamp does
not turn “ON”.
Is the bulb blown?
Replace the bulb.
Is the fuse blown?
Replace the fuse.
Is the cable connector separated from the socket?
Inspect it.
Is the contact in a poor condition?
Inspect and clean the grounding and terminals.
2. The turn signal lamp
does not come “ON”.
Is the bulb blown?
Replace the bulb.
Is the fuse blown?
Replace the fuse.
Is the cable connector separated from the sock-
et?
Inspect it.
Is the contact in a poor condition?
Inspect and clean the grounding and terminals.
3. The other lamp does
not turn "ON".
Is the bulb blown?
Replace the bulb.
Is the fuse blown?
Replace the fuse.
Is the cable in a poor contact?
Inspect the cable and secure the contact.
Is the switch defective?
Replace the switch.
TROUBLESHOOTING - ELECTRIC SYSTEM
2024h_3026h.indb 72024h_3026h.indb 7 2020-09-18 오후 6:17:332020-09-18 오후 6:17:33
MEMO
2024h_3026h.indb 82024h_3026h.indb 8 2020-09-18 오후 6:17:332020-09-18 오후 6:17:33
8
8. STORAGE AND DISPOSAL
TRACTOR STORAGE ............................................................................8-2
DAILY STORAGE .........................................................................................................8-2
LONG-TERM STORAGE .............................................................................................8-3
USING TRACTOR AFTER LONG-TERM STORAGE ...............................................8-6
USE AND DISPOSAL ....................................................................................................8-7
2024h_3026h.indb 12024h_3026h.indb 1 2020-09-18 오후 6:17:332020-09-18 오후 6:17:33
8
-
2
BAD BOY TRACTOR
TRACTOR STORAGE
DAILY STORAGE
1. Store the tractor after cleaning it.
Especially, clean it thoroughly af-
ter harrowing or working in a wet
eld.
2. Be sure to lower the implement.
3. Store it indoors if possible. If it
should be kept outside, cover it.
4. Remove the battery from the trac-
tor in winter and store it indoors
for easy starting.
5. Add anti-freeze to the tractor in
winter season in order to prevent
the radiator from freezing.
6. Remove the ignition key and store
it separately.
CAUTION
•
Unless the battery is removed
from the vehicle, make sure to
disconnect the negative bat-
tery cable. The wiring can be
gnawed by rodents, leading to
a re.
Don’t forget to dry
off and grease the
tractor after.
After work, clean the tractor. After
cleaning, dry the moisture and sup-
ply grease into each grease nipple.
Avoid water on electrical parts when-
ever possible, as it will cause equip-
ment breakdown.
•
When covering the tractor,
make sure that the engine or
the muffler has fully cooled
down.
[Otherwise]
There is a risk of re.
DANGER
•
When carrying out checking,
maintenance, or repair, make
sure to turn o the engine.
[Otherwise]
There is a risk that you may be
entangled in the tractor or get
injured.
CAUTION
2024h_3026h.indb 22024h_3026h.indb 2 2020-09-18 오후 6:17:332020-09-18 오후 6:17:33
8
-
3
STORAGE AND DISPOSAL
8
When the tractor will not be used for
a long time, store it in the following
manner.
1. For long storage, put the ignition
switch to “OFF”
2. Select a dry and well-drained place
for storage. Remove the weights &
implement or put it down onto the
ground.
3. Apply the anti-corrosion oil or en-
gine oil and grease on the parts
that are subject to rust.
4. Fill up the fuel tank. Empty space
in the fuel tank will produce dew-
drops that will produce condensa-
LONG-TERM STORAGE
If you carry out maintenance during
the o season, you can ensure opti-
mum condition of the tractor as well
as safe and comfortable working
conditions during the busy season.
Also, in order to secure the safety of
each part of the tractor and to pre-
vent an accident that may occur due
to poor maintenance, arrange with
your authorized dealer for periodic
maintenance once a year.
Best
condition
Maintenance
Annually
In particular, we recommend that the
electrical cables and the rubber hos-
es, such as fuel hose, steering wheel
hoses and radiator hoses, be re-
placed every two years.
Remove
&
2024h_3026h.indb 32024h_3026h.indb 3 2020-09-18 오후 6:17:332020-09-18 오후 6:17:33
8
-
4
BAD BOY TRACTOR
tion that will be the cause of rust
formation. And lock the fuel cock
to “C”. (Closed)
5. Disconnect the battery completely
and store it away from the tractor
in a well-ventilated, dry, dark place
if possible. When the battery is at-
tached to the tractor, make sure to
connect the (+) terminal rst
6. Change the engine oil and run the en-
gine to circulate oil throughout all the
engine parts for about 5 minutes.
7. Drain the coolant from the radiator.
After draining the coolant, fasten a
tag of "No coolant, do not start" to
the steering wheel. If there is an-
ti-freeze in the cooling system, it is
not necessary to drain it.
8. Check the bolts and nuts for loose-
ness, and tighten if necessary.
9. Add oil, uid and fuel to each part
according to the maintenance
chart.
10. Apply a slight coat of grease or
oil onto the tractor parts where is
easy to be rust such as bare metal
surface.
11. Inate the tires to a pressure a
little higher than usual.
12. Detach the weights and detach
or lower the attached implement
on the ground.
13. Place chocks behind and in front
of the rear wheels.
14. Remove the battery from the
tractor or disconnect the (-) ca-
ble from the battery.
15. When storing the tractor for a
long period of time, make sure to
put the clutch pedal in the disen-
gaging position. If not, the clutch
disc can be stuck to the ywheel
after a long period time.
16. Put wooden props under the
tires to protect them.
17. Recharge the battery every two
months during a long-term stor-
age.
18. Store it in a dry place to avoid
rain or snow and cover the body.
19. Keep the clutch pedal in a de-
pressed position to avoid rust on
the clutch.
20. Replace the worn or damaged
parts.
21. Put all controls into the neutral
position.
22. Install the cover to the exhaust
pipe.
23. Cover the air cleaner, muf-
fler, and engine oil inlet with
plastic sheets to keep moisture
away.
24. Maintain the air pressure in the
tires.
2024h_3026h.indb 42024h_3026h.indb 4 2020-09-18 오후 6:17:332020-09-18 오후 6:17:33
8
-
5
STORAGE AND DISPOSAL
8
IMPORTANT
•
When cleaning the tractor, be
sure to stop the engine. Allow
sufficient time for the engine
to cool before washing.
•
Cover the tractor after the muf-
fler and engine have cooled
down.
•
Carry out maintenance on a
flat and safe place where the
tractor will not fall or move
and there is no trac danger.
Also, block the front tires to
prevent moving of the tractor.
Otherwise, there is a risk of
accident, such as overturning
of the tractor.
WARNING
CAUTION
•
To avoid a personal injury,
•
Never clean the tractor body
while the engine is running.
•
Never run the engine in an en-
closed area without proper
ventilation system in order to
prevent poisoning by exhaust
gas.
•
When storing the tractor, re-
move the key from the switch
and store it separately in or-
der to prevent an unautho-
rized person from operating
the tractor and being injured.
•
Carry out checking and main-
tenance for each part every
year.
•
In particular, replace the fuel
pipe and the steering hose
every two years. Otherwise,
there is a risk of accident or
machinery breakdown due to
poor maintenance.
•
When carrying out checking
or maintenance, make sure to
stop the engine.
•
Replace the covers that have
been detached for checking or
maintenance.
•
Carry out checking or mainte-
nance after heated parts, such
as muer, engine or transmis-
sion, have fully cooled down.
[Otherwise]
There is a risk of getting burnt.
WARNING
2024h_3026h.indb 52024h_3026h.indb 5 2020-09-18 오후 6:17:332020-09-18 오후 6:17:33
8
-
6
BAD BOY TRACTOR
10. Get onto the tractor and start the
engine.
11. Check if the instrument pan-
el and all parts operate correct-
ly while running the engine for a
few minutes.
12. Drive the tractor outside and
check if it is operating properly.
Park the tractor outside and idle
the engine for at least 5 minutes.
Stop the engine and visually in-
spect the tractor. Check if there
is leakage.
13. Start the engine, release the
parking brake, and check the
brake condition by depressing
the brake pedal. Adjust the free
play of the brake pedals if nec-
essary.
14. Stop the engine and check for
leakage. Repair any part as re-
quired.
•
When operating the tractor in
an enclosed area, ventilate the
area to release exhaust gas
to the outside. Exhaust gas is
colorless and not visible, but
is harmful.
WARNING
USING TRACTOR AFTER
LONG-TERM STORAGE
Keep the following instructions when
using the tractor after its long-term
storage.
1. Perform the inspection procedures
before operation.
2. To prolong the life and to enhance
the performance of the engine,
idle the engine for about 30 min-
utes before starting work.
3. Check the tire air pressure and in-
ate the tires if they are low.
4. Install a fully charged battery.
Check that the battery is fully
charged before installing it.
5. Check the fan belt tension.
6. Check all uid levels. (Engine oil,
transmission/hydraulic oil, and en-
gine coolant)
7. Remove grease from the exposed
cylinder rod.
8. Apply grease to the lubrication
points.
9. Remove the cover from the ex-
haust pipe.
2024h_3026h.indb 62024h_3026h.indb 6 2020-09-18 오후 6:17:332020-09-18 오후 6:17:33
8
-
7
STORAGE AND DISPOSAL
8
USE AND DISPOSAL
It is recommended to keep the
following to protect the environment:
1. Overload on the machine shortens
the product life and increases the
harmful exhaust gas which causes
air pollution due to the incomplete
combustion.
2. When changing the fluid (engine
oil, transmission/hydraulic oil, and
engine coolant) by yourself, be
careful not to spill it and dispose
used oil and coolant properly ac-
cording to the applicable regula-
tions. Otherwise, it can pollute the
ground and water.
2024h_3026h.indb 72024h_3026h.indb 7 2020-09-18 오후 6:17:332020-09-18 오후 6:17:33
MEMO
2024h_3026h.indb 82024h_3026h.indb 8 2020-09-18 오후 6:17:342020-09-18 오후 6:17:34
