Visit our website at: https://www.harborfreight.com
For product assistance, visit harborfreight.com/customer-support/contact-us
DOMING BLOCK AND PUNCH SET
93539
TM
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s Date code in the back of
the manual near the assembly diagram (or month and year of purchase if product has no number). Keep
this manual and the receipt in a safe and dry place for future reference.
26h
When unpacking, make sure that the product is intact and
undamaged. If any parts are missing or broken, please
visit harborfreight.com/customer-support/contact-us
as soon as possible.
Copyright
©
2026 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2
For product assistance, please visit harborfreight.com/customer-support/contact-us
Item 93539
Specifications
Doming Block 18 Hemispheres (Sizes: 4.5mm to 38.5mm)
Punches 24 Punches (Sizes: 2.3mm to 25mm)
IMPORTANT SAFETY INFORMATION
1. Use only according to these instructions.
Improper use can create hazards.
2. Wear ANSI-approved safety goggles, full face
shield and heavy-duty work gloves during use.
3. Keep work area clean and well lit.
4. Keep bystanders out of the area during use.
5. Do not use when tired or when under the
influence of drugs or medication.
6. This product is not a toy. Do not allow
children to play with or near this item.
7. Use for intended purpose(s) only.
8. Inspect before use; do not use if parts are damaged.
9. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
10. Harbor Freight Tools cannot be held responsible
for damage to jewelry or other items resulting
from use of this Punch/Block Set.
11. The face of these tools may chip if struck against
another striking tool or hardened surface. This
will damage the tool and possibly result in
eye or bodily injury. Always check tool before
using, and always discard a chipped tool.
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
Note: The quality of shapes produced by this tool is largely dependent on the quality
and preparation of the workpieces and also the care of the user.
1. This tool is used to shape metal sheet material,
such as Copper, Aluminum, Soft Steel and Brass.
2. The material must be smaller in diameter than the
hemisphere it will be placed in. If the material is
too thick , or placed in a hemisphere that is too
small, the material may dimple, crease, or fail to
take on the shape and radius of the hemisphere.
3. If the punch is too small the edges
of the material will buckle.
4. Choose a hemisphere and punch based on
the size of the material to be shaped.
5. Center the material in the hemisphere. Place
the punch directly on top of the material.
6. Hold the punch firmly. Make sure your fingers
are clear of the top surface of the punch.
7. Using a wooden mallet, strike the top surface
of the punch in a tapping motion.
8. Periodically remove the punch and
check the progress of the shaping.
9. Repeat Steps 7 and 8 until material takes on
the smooth, curved radius of the hemisphere.
Maintenance and Servicing
1. Before each use, inspect general condition of
doming block and punches. Check for cracked or
broken parts, and any other condition that may affect
its safe operation. Do not use damaged equipment.
2. After opening and each use, wipe the heads
and block with a soft, dry cloth to remove
protective oil, moisture, and residue.
3. Before long-term storage, apply a thin layer
of light machine oil to the steel surfaces.
4. Store the punches in the provided wooden stand to
prevent contact and maintain the polished finish.
5. CAUTION! All maintenance, service, and repairs
not mentioned in this manual must only be
performed by a qualified service technician.
Page 3
For product assistance, please visit harborfreight.com/customer-support/contact-us
Item 93539
Component List and Diagram
PUNCH
NO PUNCH FACE SIZE (MM)
1 2.3
2 3.5
3 4.3
4 5.1
5 5.9
6 6.7
7 7.5
8 8.3
9 9.1
10 9.9
11 10.7
12 11.5
13 12.3
14 13
15 13.8
16 14.6
17 15.4
18 16.2
19 17
20 18.6
21 20.2
22 21.8
23 23.4
24 25
DOMING BLOCK (49MM X 49MM)
FACE CAVITY SIZE
1 4mm, 5mm, 6mm, 7mm, 8mm, 9mm,
10mm, 11mm, 12mm, 13mm, 14mm
2 16mm , 18mm , 20mm
3 25mm
4 30mm
5 35mm
6 40mm
The component list and assembly diagram are shown for reference only. To view
all currently available replacement parts, please visit harborfreight.com/parts
Doming Block
Punches
(24 Pieces)
Record Product’s Date Code Here:
Note: If product has no Date Code, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes
only, and are not available individually as replacement parts.
Specify UPC 193175552327 when ordering parts.
TM
For product assistance, visit harborfreight.com/customer-support/contact-us
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE COMPONENT LIST AND
ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE
MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY
KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT,
OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS,
AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability
standards, and warrants to the original purchaser that this product is free from defects in materials
and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside
our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent,
special or consequential damages arising from the use of our product. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion
may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
