X10 ACE MINI
Bike Pump
Read this manual carefully before
use and keep it for future reference.
User Manual
Contents
1.SAFETY INSTRUCTIONS
2. PRODUCT OVERVIEW
3. PACKAGE CONTENTS
4. BATTERY LEVEL INDICATOR & CHARGING
5. TURN ON/OFF
6. CONNECTION METHOD
7. RECOMMENDED INFLATION PRESSURE TABLE
8. DETECTING THE CURRENT PRESSURE
9. DETERMINING THE RIGHT AIR PRESSURE
10. PRESSURE PRESETS
11. START/STOP INFLATION
12. UNSCREWING THE VALVE
13. SPECIFICATIONS
14. TROUBLESHOOTING
02
12
13
14
15
04
05
06
07
07
09
10
10
11
- 01 -
●
●
●
●
●
●
●
●
●
1.SAFETY INSTRUCTIONS
The machine will produce about 80dB noise when working, please pay attention to protection.
This product is not a toy and is prohibited for children. The recommended user age is above
16 years old. During inflation, please keep children at a safe distance from the air pump.
The product contains a non-removable lithium-ion battery. Do not throw the product into a fire
or dispose of it arbitrarily. Overheating, impacting, or submerging the lithium-ion battery
poses risks of fire, spontaneous combustion, and explosion. Please avoid exposing it to
high-temperature environments such as inside vehicles.
The storage temperature of the product should not be below -10°C or above 45°C. Excessive
cold or heat can shorten the product's lifespan and damage the battery.
Do not disassemble, hit, squeeze, or cut the battery; otherwise, it may explode.
Do not place the battery at extremely low pressure; otherwise, the battery may explode or leak
flammable liquids and gases.
If the battery is severely expanded, do not continue to use.
Do not swallow the battery, otherwise it may cause chemical burns.
If you think the battery may have been swallowed or placed in any part of your body, seek
medical attention immediately.
- 02 -
The machine will produce about 80dB noise when working, please pay attention to protection.
This product is not a toy and is prohibited for children. The recommended user age is above
16 years old. During inflation, please keep children at a safe distance from the air pump.
The product contains a non-removable lithium-ion battery. Do not throw the product into a fire
or dispose of it arbitrarily. Overheating, impacting, or submerging the lithium-ion battery
poses risks of fire, spontaneous combustion, and explosion. Please avoid exposing it to
high-temperature environments such as inside vehicles.
The storage temperature of the product should not be below -10°C or above 45°C. Excessive
cold or heat can shorten the product's lifespan and damage the battery.
Do not disassemble, hit, squeeze, or cut the battery; otherwise, it may explode.
Do not place the battery at extremely low pressure; otherwise, the battery may explode or leak
flammable liquids and gases.
If the battery is severely expanded, do not continue to use.
Do not swallow the battery, otherwise it may cause chemical burns.
If you think the battery may have been swallowed or placed in any part of your body, seek
medical attention immediately.
Please do not throw the battery into the domestic waste for disposal, and please comply with
the corresponding national regulations to safely dispose of the used battery.
Long-term idling of the product may damage the battery. It is recommended to charge it at
least once every three months.
The product contains a DC motor, which may produce electrical sparks during operation. Do
not use it in flammable or explosive environments.
If abnormal sounds or excessive temperature are detected during operation, please
immediately turn off the power.
Do not leave during inflation and observe the process to prevent over-inflation due to
incorrect preset pressure values.
Use in a dry and clean environment. The ingress of dirt and dust may cause product damage.
The product is not waterproof, and rinsing with water is prohibited.
When abnormalities occur with the air pump, please try restarting it first.
Please use a safe and compliant adapter and original charging cable to charge this product.
Faults caused by not following these instructions are not covered by the warranty.
After prolonged use of the air pump, the temperature of the valve interface and the connection
between the air hose and the body rises. Do not touch to avoid burns.
●
●
●
●
●
●
●
●
●
Please do not throw the battery into the domestic waste for disposal, and please comply with
the corresponding national regulations to safely dispose of the used battery.
Long-term idling of the product may damage the battery. It is recommended to charge it at
least once every three months.
The product contains a DC motor, which may produce electrical sparks during operation. Do
not use it in flammable or explosive environments.
If abnormal sounds or excessive temperature are detected during operation, please
immediately turn off the power.
Do not leave during inflation and observe the process to prevent over-inflation due to
incorrect preset pressure values.
Use in a dry and clean environment. The ingress of dirt and dust may cause product damage.
The product is not waterproof, and rinsing with water is prohibited.
When abnormalities occur with the air pump, please try restarting it first.
Please use a safe and compliant adapter and original charging cable to charge this product.
Faults caused by not following these instructions are not covered by the warranty.
After prolonged use of the air pump, the temperature of the valve interface and the connection
between the air hose and the body rises. Do not touch to avoid burns.
- 03 -
2.PRODUCT OVERVIEW
1. Type-C Charging Port
2. Button"-"
3. Power/Start-Stop Button
4. “+" Button
5. Display Screen
6. Presta Valve
1
2
3
4
5
6
- 04 -
3.PACKAGE CONTENTS
X10 ACE MINI Bike pump×1 Schrader-Presta
valve adaptor×1
Charging Cable×1 User manual×1Air hose×1
- 05 -
4.BATTERY LEVEL INDICATOR& CHARGING
Charging
Please fully charge before first use. Use a charging cable to connect a 5V USB adapter to the air
pump for charging.
Battery Level Indicators During Charging:
Charging: Battery level indicators are blinking.
Fully charged: The battery level indicator does not flash and goes off after three minutes (Power off).
Tips:
●The air pump is in power-off state during charging and cannot be used.
●You need to purchase a safe and compliant adapter yourself.
●Increased pressure load and lower ambient temperature can both lead to reduced endurance.
≤25%
25%＜ ≤50% 50%＜ ≤75% 75%＜ ≤100%
- 06 -
Charging
Please fully charge before first use. Use a charging cable to connect a 5V USB adapter to the air
pump for charging.
Battery Level Indicators During Charging:
Charging: Battery level indicators are blinking.
Fully charged: The battery level indicator does not flash and goes off after three minutes (Power off).
Tips:
●The air pump is in power-off state during charging and cannot be used.
●You need to purchase a safe and compliant adapter yourself.
●Increased pressure load and lower ambient temperature can both lead to reduced endurance.
● To ensure normal operation, please inflate under high pressure when the battery is sufficient
and charge it in time when the battery is low.
5.TURN ON/OFF
6.CONNECTION METHOD
On
Press and hold the Power/Start-Stop button for about 2 seconds to turn on the air pump.
Off
In the power-on state, press and hold the Power/Start-Stop button to turn off the air pump.
In the power-on state, if there are no operations within 3 minutes, the air pump will automatically
turn off.
Presta Valve
Connect the Air pump X10 Ace Mini’s valve to the Presta valve on the tire to inflate. During
inflation, keep the valve pressed tightly.
Note: When using the Presta valve, please screw the valve nut to the topmost position and secure it.
- 07 -
● To ensure normal operation, please inflate under high pressure when the battery is sufficient
and charge it in time when the battery is low.
Using Valve Connection
Connect the Air pump X10 Ace Mini’s Presta valve directly to the tire's
Presta valve for inflation.
Using Hose Connection
Connect the air pump to the standard high-pressure air hose, install the
Presta valve adapter, and then connect to the tire's Presta valve for
inflation.
Schrader Valve
Connect the Air pump X10 Ace Mini’s valve to the standard high-pressure
air hose, then connect to the Schrader Valve on the tire to inflate.
- 08 -
7.RECOMMENDED INFLATION PRESSURE TABLE
Product Category
Bicycle
Electric bicycle 26-44Psi
Product Type
Recommended
Pressure Range
30-50Psi
40-50Psi
45-65Psi
100-130Psi
12, 14, 16 inch bicycle tires
20, 22, 24 inch bicycle tires
26, 27.5, 29 inch mountain bike tires
700c road bicycle open tire
Electric bicycle tires
NOTE: The recommended inflation pressure range values are for reference only. Please refer to
the operating instructions of the product being inflated. Common Unit Conversion: 1bar ≈
14.5psi, 1bar = 100kPa.
- 09 -
8.DETECTING THE CURRENT PRESSURE
9.DETERMINING THE RIGHT AIR PRESSURE
When the air pump is in the power-on state and connected to the inflation pressure detection
object, the number displayed on the screen is the current pressure. The air pump's pressure
measurement range is 3-150 Psi / 0.2-10.3Bar.
For safety, please inquire about the required inflation pressure of the item being inflated before
inflating to avoid personal injury caused by explosion due to over-inflation.
Tires
The tolerable pressure range for tires of bicycles, electric bicycles, some
motorcycles, and scooters is indicated on the tire's sidewall. The inflation
pressure is related to the load weight. For more detailed pressure
recommendations, please consult the corresponding product manual.
5
0
P
S
I
- 10 -
10.PRESSURE PRESETS
Inflation Pressure Range
The pressure value unit is Psi, with an adjustable range of 3-120 Psi / 0.2-8.3Bar.
Adjusting Preset Values
Preset Value Adjustment: Before inflation, you can adjust the preset pressure value by
short-pressing the "+" or "-" button, or long-pressing for quick adjustment.
When adjusting the preset pressure value, the digits flickering indicate the target
pressure adjustment status, and the digits constantly lit indicate real-time pressure.
The value is memorable, and the air pump will display the pressure value set during
the last inflation upon power-on.
- 11 -
Tips: The machine will automatically stop inflating if it is operated below 5 psi for one minute.
The machine will automatically stop inflating if it is operated above 100 psi for one minute.
11.START/STOP INFLATION
Start Inflation
In the power-on state, shortly press the Start-Stop button to start inflation. During inflation, the
number displayed shows real-time pressure changes (if there is no pressure change and inflation
stops automatically after more than one minute, please check if the tire is leaking air). Noise of
about 80dB will be produced during inflation, so please take precautions. After prolonged use,
the high-pressure air hose, valve interface, and body will have significant temperature increases.
Avoid touching them for an extended period to prevent burns.
Stop Inflation
When the pressure reaches the preset pressure value, the air pump will automatically stop
inflating. You can also stop inflation by shortly pressing the Power/Start-Stop button during the
process.
- 12 -
Start Inflation
In the power-on state, shortly press the Start-Stop button to start inflation. During inflation, the
number displayed shows real-time pressure changes (if there is no pressure change and inflation
stops automatically after more than one minute, please check if the tire is leaking air). Noise of
about 80dB will be produced during inflation, so please take precautions. After prolonged use,
the high-pressure air hose, valve interface, and body will have significant temperature increases.
Avoid touching them for an extended period to prevent burns.
Stop Inflation
When the pressure reaches the preset pressure value, the air pump will automatically stop
inflating. You can also stop inflation by shortly pressing the Power/Start-Stop button during the
process.
Note:
Products such as balloons, toy balls, and swimming rings have inflation pressures lower than the
air pump's measurement range and cannot automatically stop inflation at the preset pressure.
Please use them cautiously.
After inflation is complete, the high-pressure air hose and valve interface will have high
temperatures. Be careful of burns when disconnecting the valve. There will be slight air leakage
when disconnecting, so please disconnect quickly to reduce air output.
12.UNSCREWING THE VALVE
Note:
Products such as balloons, toy balls, and swimming rings have inflation pressures lower than the
air pump's measurement range and cannot automatically stop inflation at the preset pressure.
Please use them cautiously.
After inflation is complete, the high-pressure air hose and valve interface will have high
temperatures. Be careful of burns when disconnecting the valve. There will be slight air leakage
when disconnecting, so please disconnect quickly to reduce air output.
- 13 -
13.SPECIFICATIONS
Name
Model
Item Dimensions
Length of air hose
Inflation Pressure Range
Pressure Measuring Range
Working Temperature
Storage Temperature
Battery Capacity
Input parameter
Charging Port
Charging Time
Sensor Accuracy
Fanttik X10 Ace Mini Portable Electric tire inflator
X10 Ace Mini
72×53×30mm
100mm
3-120Psi
3-150Psi
0℃~45℃
-10℃~45℃
3.7Wh/7.4V / 500mAh
5V/2A
USB Type-C
Less than 1 hour
±1Psi
- 14 -
/0.2-8.3Bar
/0.2-10.3Bar
14.TROUBLESHOOTING
Problem
Slow inflation speed
Air compressor turns
on but does not
inflate
Air compressor inflates
normally but the
displayed
pressure is zero
Air leaks out when
connecting the air hose
Air compressor was
already turned off after
connecting the air hose
to a valve
Solution
1.Check whether the air compressor's battery level is sufficient.
2.Check whether the air hose is leaking.
3. Check whether both ends of the air hose are securely connected.
4. Check whether the item that is being inflated is leaking.
1.Check whether the air compressor's battery level is sufficient.
2. Check if the current tire pressure is higher than the preset value.
Products such as balloons with low inflatable pressure are
not within the range of this product.
Press and hold the ON/OFF button to turn on the inflator again.
Tighten the valve.
- 15 -
Problem Solution
The color of the battery
indicator in the inflated
state is inconsistent
with that in the standby
state.
Cannot be turned on
Cannot inflate or detect
air pressure
Error codes H, L
Error code E1
Make sure that the battery is sufficiently charged.
There is a significant voltage drop when the lithium battery is being
discharged, which leads to color inconsistencies between the
indicators in the inflated state and the standby state.
This is not considered a fault.
1. Make sure that you are using the correct valve connector.
2. When using the Presta valve adapter, make sure that the screws
of the tire valve core are unscrewed.
3. When using the Schrader valve adapter, make sure that the tire
valve core is clean and free of foreign particles such as dirt.
lf the temperature exceeds the range, let the device cool at
room temperature for one hour before use.
When the air pressure exceeds the range, unscrew the valve to
check if the pressure is restored. lf the error code disappears,
check if the pressure of the inflation target exceeds the range.
- 16 -
9296936066 MONFRI 9AM5PM (ET)
www.fanttik.com
METASEE LLC
12 GREENWAY PLZ STE 1161A HOUSTON, TX 770461203
