Image: Replace the above placeholder URL with an actual Aequa product image.
Brief Description
Aequa is a balance board designed for tness applications, providing real-time
force sensor data to track a user's weight distribution and balance. It enables a
wide range of standing and balancing exercises
AEQUA– Technical Specication
.
Technical Data
Parameter
Product Name
Intended Use
Dimensions
[e.g.] 450 mm x 300 mm x 30 mm (Replace with actual
measurements)
We
Specication
AEQUA(Neuroblast Balance Board
)Balance training
ight
[e.g.] 2.5 kg (approx.)
Parameter
Specication
Material
Reinforced plastic housing, slip-resistant top surface,
Aluminium
Sensor Type
Integrated force sensors
Load Capacity
[e.g.] Up to 150 kg
Connectivity
Bluetooth (2.4 GHz)
Battery Type
Rechargeable Li-ion battery, 5V
Charging
Via USB cable or dedicated adapter (Replace with actual
charging method)
Typical Charge Time
[e.g.] 2–3 hours
Operating Time
[e.g.] 4–6 hours (depending on usage)
Operating
Temperature
[e.g.] +10 °C to +40 °C
Storage Temperature
[e.g.] 0 °C to +45 °C
Certications
Key Features
• Force Sensor Array: Measures weight distribution and balance in real time,
oering objective data for rehabilitation.
• Slip-Resistant Surface: Textured top surface prevents users from slipping
during exercises.
• Portable Design: Lightweight, low-prole form factor for easy transport and
storage.
• Wireless Connectivity: Bluetooth interface for seamless data transfer to a
smartphone, tablet, or PC.
• Battery Powered: Internal rechargeable Li-ion battery for cordless operation
in clinical or home environments.
Additional Notes
• Charging: Use only the provided or approved 5V power adapter and cable.
• Maintenance: Clean with a soft, slightly damp cloth; avoid harsh chemicals
or submersion in water.
• Safety: Ensure the board is on a stable, level surface before use. Follow
guidance from medical professionals if used for rehabilitation.
• Storage: Keep in a dry, temperate environment away from direct sunlight or
extreme temperatures.
Warning: Changes or modifications to this unit not expressly approved by theparty
responsible
for compliance could void the user’s authority to operate theequipment.
NOTE: This equipment has been tested and found to comply with the limits fora
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with theinstructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio ortelevision
reception, which can be determined by turning the equipment off andon, the user is
encouraged to try to correct the interference by one or more of the
following measures:
l Reorient or relocate the receiving antenna.
l Increase the separation between the equipment and receiver.
l Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
l Consult the dealer or an experienced radio/TV technician for help
The device must not be co-located or operating in conjunction with any other
antenna or transmitter.
* RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
