105mm
封面
105mm封底
01
LED 指示灯
LED 指示灯
LED 指示灯
02
USB Type C 充电端口
麦克风
麦克风
包装清单 外观图示
S
XS S M
M L
RL
03
充电
05 06
07 08
09 10
11 12
USB充电线充电盒 耳机
耳塞套 使用说明书
收纳袋
x1
x1
x1x1x6
复位键
真无线立体声耳机
13
声明和警告
在配对新设备之前请断开当前设备。
警告！
长期暴露在高噪音环境中可能会导致永久性听力损伤。
请勿在禁止使用电子设备的场所使用 Noble Astrid 耳机。
如果您有心脏起搏器或其他电子医疗设备，请在使用您 Noble Astrid 耳机前咨询您的
医生。
此包装包含小零件，可能对小孩造成危险。
请勿擅自拆卸 Noble Astrid ，因为它包含锂电池，拆卸可能会导致触电、火灾或人身
伤害的危险。
避免在过高或过低温环境中使用。
任何未经授权的人员拆卸更换或试图维修 Noble Astrid ，都会导致 Noble Astrid 的保
修失效。
本产品不适用于在水中或过于潮湿的环境中使用，请勿放入或浸没在水或其它液体中。
否则将导致任何保修失效，并可能对产品造成永久性损坏。
如果产品鼓起或者破损，有可能意味着电池已经老化，因而造成爆炸、引起火灾。发现以
上情况，请切勿再继续使用！
03 04
使用说明书
说明：首次使用前请确保耳机和充电盒已充满电。
充电前和充电过程中，耳机和充电盒需要保持干净和干燥。
充电步骤：
1. 耳机放回充电盒且关闭充电盖时
会自动关机。
打开或关闭充电盒盖子时，LED指
示灯会显示电量状态。
2. 插入 USB Type C 充电线，将充
电盒与电源连接。
21
多功能传感器 (MFS)
多功能传感器 (MFS)
01
S
XS S M
M L
105mm
封面
105mm
True Wireless Stereo Earphone
INSTRUCTION MANUAL
封底
Reset Button
LED Light Indicators
LED Light
Indicators
LED Light Indicators
USB Type C Charging Port
Multifunction Sensor (MFS)
Multifunction Sensor (MFS)
Microphone
Microphone
Packing List Overview
Charging Case x1 Earphones Charging Cable x1
Ear Tips x6 Instruction Manual x1 Storage Bag x1
Notes:
Charging Steps:
Please make sure the earphones and charging case are fully charged prior to first use.
The earphones and charging case need to be clean and dry before and during the
charging process.
1. The earphones will power o
automatically when put back in the
charging case and the charging lid is
closed.
The LED light will indicate the power
capacity when lid is opened or closed.
2. Connect the charging case with
power source by inserting the USB
Type C charging cable.
Charging Wireless charging
05 06
07 08
09 10
Do not use the Noble Astrid earphones in locations prohibiting the use of electronic equipment.
WARNING!
Long-term exposure to high noise volumes may cause permanent hearing loss.
Consult your physician prior to using your Noble Astrid earphones if you have a pacemaker
or other electrical medical devices.
This package contains small parts, which may pose a hazard to small children.
Do not disassemble the Noble Astrid as it contains lithium batteries, and disassembly could
result in electric shock or fire or serious injury.
Any disassembly of the
Noble Astrid
, or attempt to replace or repair the
Noble Astrid
by an
unauthorized person, will void the Noble
FoKus
Prestige Encore warranty.
This product is not designed for use in water or wet environments. Keep product away from
water and liquids.
Failure to do so will void any warranty and may cause permanent damage to the product.
Dispose of the product if it becomes swollen or cracked as it may be an indication
that the battery is degraded and may burst and cause a fire.
Declarations and Warnings
Disconnect previous devices before pairing a new device.
11 12
13 14
重置程序
1. 将耳机放回充电仓内
2. 按下复位按键5秒,直到两个耳机上的蓝色 LED 灯快速闪烁，重置完成,所有先前配对
的设备都将被清除。
如果不小心只重置了一只耳机，则需要重置两只耳机才能再次作为一对耳机使用。
* 如果耳机无法相互配对或者无法与其他设备配对，请重置耳机。
21
5”
* If the earphones cannot pair to each other or to your bluetooth devices, please
reset them.
1. Put both earphones into the charging case
2. Hold the reset button for 5 seconds until the blue LED lights on both earphones
flash quickly. All previously paired devices will be cleared.The reset process is
completed.
In the case that only one earphone is accidently reset, both earphones will need to
be reset to function as a pair again.
21
Reset Procedure
5”
RL
04
2
OFF
1
ON
开机 / 关机
打开充电盒时，耳机会自动开机。
将耳机放回充电盒并合上盒盖，耳机将自动关机。
要手动打开耳机，请长按 MFS 按钮 3 秒钟。
要手动关闭耳机，请长按 MFS 按钮 7 秒钟。
两侧耳机都会自动断电。
To manually turn the earphones on, hold the MFS
button for 3 seconds.
To manually turn o the earphones, hold the MFS
button for 7 seconds. Both sides will power o
automatically.
The earphones will power on automatically when charging lid is opened.
The earphones will power o automatically when put back in the charging case and
the charging lid is closed.
Power On / O
2
OFF
1
ON
Noble Astrid
Settings
Bluetooth
Bluetooth
DEVICES
配对
配对新设备
使用前， Noble Astrid 需要与您的设备配对。 配对后，每次激活它们都会自动连接
。
配对/取消配对程序
1. 打开充电盒盖子。 耳机将自
动开机并进入配对模式，蓝白指
示灯闪烁。
2. 在智能手机上启用蓝牙并在
可用的蓝牙设备中搜索“
Noble
Astrid
”。 找到后，选择
“
Noble Astrid ”开始配对。
你会听到"Connected"，耳机就
可以使用了。
1. 打开充电盒的盖子。 耳机将自动开机并连接到您当前的设备。
2. 通过从智能手机的蓝牙设备列表中“断开连接”或删除“Noble Astrid ”来取消耳机
与上次连接的智能手机的配对。
3. 断开连接后，耳机将自动进入配对模式，蓝白指示灯交替闪烁。
4. 在新设备上启用蓝牙，并在可用的蓝牙设备中搜索“Noble Astrid ”。 找到后，选择
“Noble Astrid ”开始配对。 你会听到"Connected"，耳机就可以使用了。
Pairing a new device
Pairing
The Noble Astrid will need to be paired to your device before use. Once paired, they will
connect automatically each time they are activated.
1. Open the lid of the charging case.
The earphones will power on
automatically and enter pairing mode,
Blue and white LED light flashes.
2. Enable Bluetooth on your
smartphone and search for "Noble
Astrid" in available Bluetooth
devices. Once found, select "Noble
Astrid" to initiate pairing. You will
hear "connected", now the
earphones are ready for use.
1. Open the lid of your charging case. The earphones will power on automatically
and connect to your current device.
2. To unpair the earphones from your last connected smartphone by "disconnecting" or
deleting "
Noble Astrid
" from your smartphone's Bluetooth device list.
3. Once disconnected, the earphones will automatically enter pairing mode, with blue
and white indicator lights flashing alternately.
4. Enable Bluetooth on your new device, and search for "Noble Astrid" in the
available Bluetooth devices. Once found, select "Noble Astrid" to initiate
pairing. You will hear "connected", now the earphones are ready for use.
Pairing/Unpairing Procedure
Noble Astrid
Settings
Bluetooth
Bluetooth
DEVICES
21
S
XS S M
M L
佩戴
1. 选择适合您的耳塞套尺寸，将其插在耳机前端出音口上。
2. 将耳机插入耳道并调整至舒适的位置。确保耳塞紧密贴合。
1. Select an ear tip size suitable for your ear and slide them on to the tip of the earphone.
The case will automatically begin charging once placed on a wireless charger, The LED
indicator on your earbuds case will confirm charging status.
*(Wireless charger must be
purchased separately.)
2. Insert the earphones into your ear canals and adjust them to a comfortable fit. Be sure
that the eartips have a secure seal.
Fit
21
S
XS S M
M L
<25%
25%-50%
50%-75%
>75%
100%
21
<25%
25%-50%
50%-75%
>75%
100%
LED指示灯
使用场景
ＬＥＤ指示灯状态
˙超距离回连：当耳机超出手机连接范围时，3分钟内回到有效距离会自动回连手机；
若超时 3 分钟未回连接，耳机将自动关机。
˙单声道模式：蓝牙成功连接后，只要把任意一只耳机放回充电盒并合上盖子，另一只
耳机将独立工作。
˙开机并连接后，如果任一只耳机电量耗尽并关机，另一只耳机可继续使用。
白色 LED 灯闪烁一秒钟
蓝色 LED 灯闪烁一秒钟
蓝色 LED 灯每 8 秒闪烁两次
白灯亮2秒, 熄灭
蓝白 LED 灯闪烁
开机
关机
配对
配对成功
播放音乐或通话
耳机低电量
将耳机放入充电盒中
耳机放入充电盒满电后
LED 灯关闭
LED 灯关闭
蓝色 LED 灯常亮
充电盒充电中
充电盒满电后
<25%
25%-50%
50%-75%
>75%
100%
所有灯常亮
模式切换
简而言之，就是通透模式/ANC模式/关闭
ANC模式的循环，长按左耳塞 3 秒。
在待机模式或播放音乐时
长按 3 秒
长按 3 秒
长按左耳塞触摸传感器 3 秒钟，语音提示“ANC Off”,
将恢复到普通模式。
长按3秒
长按左耳塞触摸传感器3秒，语音提示“Ambient Mode”，将激活外部声音
捕捉功能。
长按左耳塞触摸传感器3秒，语音提示“ANC ON”，
将滤掉外界噪音。
开启降噪模式
长按 3 秒
开启通透模式
关闭降噪模式
Ambient Mode
In standby mode or when playing music
Press and hold
for 3 secs
Press and hold the left earbud touch sensor for 3 seconds with voice prompt
“Ambient Mode On”, it will activate the external sound capturing function.
Press and hold the left earbud touch sensor for 3 seconds with voice prompt
“ANC On”, will filter out external noise.
Press and hold the left earbud touch sensor for 3 seconds with voice prompt
“ANC O ”, Will return to normal mode.
There are three modes available. “Ambient
Mode”, “ANC On”, and “ANC o mode”.
To switch between modes, press and hold
the left earbud for 3 secs. The voice
prompt will confirm current selected mode.
Ambient Mode On
ANC On
ANC o mode
Press and hold for 3 secs
Press and hold for 3 secs
Press and hold for 3 secs
产品规格
产品型号
蓝牙版本
支持协议
驱动单元
频率响应
连接距离
耳机电池容量(单个)
充电保护盒电池容量
播放时间(因音量和内容而异） 8H (降噪开），11H（降噪关）
充电时间 耳机：1.5小时； 充电盒：2小时
充电接口类型 Type C
电源输入
500mAh
65mAh
≥10m
20HZ～20KHZ
A2DP、 AVRCP、 HFP
蓝牙解码
V 5.4
Astrid
5V 1A
1个动圈单元/1个动铁单元/1个平板单元
SBC、 aptX Lossless/Adaptive、 LDAC
控制
单击 MFS（L/R）
单击 MFS（L/R）
三击 MFS (L）
双击 MFS (L)
双击 MFS (R)
三击 MFS（R）
长按 MFS 2秒（L/R）
长按 MFS 3秒（R）
播放/暂停
提高音量+
音量减小 -
上一曲
下一曲
接听/挂断电话
拒接来电
通透模式 /
ANC模式
语音助手功能 -
Siri / Google
长按 MFS 3 秒（L）
Operation
Single Click MFS (L/R）
Single Click
MFS (L/R）
Triple Click
MFS (L）
Double Click
MFS (L)
Triple Click
MFS (R)
Double Click MFS（R）
Press the MFS for 3 seconds（R）
Press the MFS for 2 seconds（L/R）
Press the MFS for 3 seconds（L）
Play/Pause
Volume Up+
Volume Down-
Previous Track
Next Track
Answer Call/Hang Up
Reject Call
Voice Assistant function-
Siri / Google
Ambient mode /
ANC mode
02
Scan this QR code for Product
Registration and to find this
manual in other languages
Android
Noble FoKus App
Specification
Type C
500mAh
65mAh
≥10m
20HZ～20KHZ
A2DP、AVRCP、HFP
SBC、aptX Lossless/Adaptive、LDAC
V 5.4
Astrid
1 Dynamic Driver/ 1BA / 1 Planar
Product Model
Bluetooth Version
Bluetooth Profile
Connection Distance
Earphone Battery Capacity
Charging Case Battery Capacity
Play time
Charging time
Charging Port
Power input
5V 1A
Frequency response
DD Diameter
Audio Codec
Earbuds: 1.5 hours; charger case: 2 hours
Up to 8 hours with ANC on and 11 hours
with ANC o
LED Indicator Lights
Single Pairing mode: Put one side back in the charging case and the other earphone
will work independently.
One side will continue working even when the other side is powered o.
Pairing after being taken out of range: The earphones will automatically pair to the
smartphone within 3 minutes if they are close to the smartphone again after being
taken out of range. If they are not brought within range within three minutes, the
headphones will automatically power o.
Blue LED light flashes for one second
Blue LED light flashes twice every 8 seconds
Blue and white LED light flashes
Power On
Power O
Pairing
Pairing succeeds
Playing music or on calling
Low Power
When put earphones in the charger case
Earphones are sitted in the charger case
White LED light on
Blue LED light on
Usage Scenario
LED Indicator Status
LED light o
Case is charging
Case full charged
LED light o
<25%
25%-50%
50%-75%
>75%
100%
White LED light flashes for one second
White LED remains on for 2 seconds
www.nobleaudio.com
***-******
请扫描二维码查看多国语言
苹果手机APP
安卓手机APP
www.nobleaudio.com
***-*******
iOS
Noble FoKus App
It Sounds Even Better with the Noble FoKus App!
Noble Astrid
Noble Astrid
14
如果本设备确实对无线电或电视接收造成有害干扰（可通过关闭和
打开设备来确定），我们建议用户尝试以下方法来解除干扰：
注意：本设备经过测试，符合FCC规则第15部分对B类数字设备的
限制性要求。这些限制旨在提供合理的保护，以防止住宅环境中的
有害干扰。本设备会产生、使用、并发射无线电波，如果未按照说
明进行安装和使用，可能对无线电通信造成有害干扰。然而，我们
不能保证在特定安装条件下不会发生干扰。
调整接收天线的方向或位置。
增加设备和接收器之间的距离。
将设备连接到与接收器不同的电路插座上。
咨询经销商或有经验的无线电/电视技术人员，寻求帮助。
FCC 信息
FCC ID：2AT8X-NBASTRID
本设备符合FCC规则第15部分的规定。 操作须符合以下两个条件：
1. 本设备不得产生有害干扰。
2. 本设备必须接受任何收到的干扰，包括可能导致意外操作的干扰。
警告：未经制造商授权的修改可能会导致用户丧失操作本设备的权力。
<25%
25%-50%
50%-75%
>75%
100%
将充电盒放在无线充电器上后，充电盒将自动开始充电，充电盒上的 LED 指示灯将
指示充电状态。
无线充电
使用无线充电器给充电盒充电:
只需将充电盒放在无线充电器
上即可。如果充电盒未充电，
请尝试重新放置。
*（无线充电器需自行购买）
<25%
25%-50%
50%-75%
>75%
100%
Using a wireless charger to
charge the charging case:
Simply place the charging case
on the wireless charger. If the
charging case is not being
charged, please try to reposition
it.
CMIIT ID:
Noble Hifi.LLC
CMIIT ID:
Noble Hifi.LLC
FCC STATEMENT
FCC ID：2AT8X-NBASTRID
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
( 1 ) This device may not cause harmful interference, and
( 2 ) This device must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure Warning Statement:
ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforan
uncontrolledenvironment.Thisequipmentcanbeusedinportableexposure
conditions.
滚滚长江东逝水
