The Small Aperture (SA) placeholder serves as a trim kit template, to aid in properly
sizing cuts of the surface material, and it also protects the SA’s port from any debris
from entering the enclosure during the construction phase.
20180409
SMALL APERTURE
®
PLACEHOLDER
Sheetrock Trim Kit Installation:
First, choose the placeholder that matches your trim kit, round/square, and mount it to the SA
cabinet. Next cut a hole in the sheetrock just large enough to accommodate the placeholder
and install the sheetrock over the SA cabinet. If done properly, only the MDF placeholder will be
visible when sheetrock is installed. Now, remove the MDF placeholder and attach the sheetrock
trim kit to the SA’s enclosure. Insert the provided foam piece into the center hole of the
the trim kit and any required spacers in place. Making sure to mud up to the rim of the trim kit
install the speaker module and grille into the exposed port to complete the installation.
First, choose the placeholder that matches your trim kit, round/square, and mount it to the SA's
cabinet. Next cut a hole in the surface material just large enough to accommodate
placeholder and install the trim kit and any required spacers, speaker module, and grille into the
exposed port to complete the installation.
1
2
