Please read this instruction carefully before using the product and keep it properly
Quick User Guide
clip on speaker
Model name:Clip-S
Button Functions
- 1 -
Hold on 2s / Hold on 4s Power On / Power O
Press for 2s turn on
enter pairing mode
≤10m (Free space)
INSMY-Clip-S
Auto o: No connection for 10 minutes.
Auto disconnect: No music playing for 30 minutes after wireless
connected
When the connection is successful, the white indicator light is on;
when playing music, the white indicator light is o; when
disconnected, the white indicator light ashes.
- 2 -
Button Functions
x 1
x 1
x 2
x 3
x 1
x 2
x 1s
x 1
x 1s
How do I activate stereo pairing mode?
1. Turn on both speakers and the indicator light will ash.
2. Double-tap the power button on either speaker.
3. A tone sounds and the indicator light stops ashing.
4. Turn on your Bluetooth device and search for INSMY CLIP S.
Please note that double-tapping the power button will disconnect
the pairing.
- 3 -
Hold on 5s
Reset Successfully:
White light stay on for 2s
Restore Facto Settings
* You might need to reset the INSMY-Clip-S if it's not in correct
connection with your devices.
* After reseting, delete the paired "INSMY-Clip-S" from your device
and re-pairing it.
Forget this device
Power the speaker o and on again to sta the new pair.
INSMY-Clip-S
LED
LED
Light on
Red indicator o
when fully charged
Red indicator on
during charging
1.5H（0%~100%）
Input:DC 5V@1A
- 4 -
Charging Instructions
FCC Warning
This device complies with pa 15 of the FCC Rules. Operation is
subject to the following two conditions:(1) This device may not cause
harmful inteerence, and (2) this device must accept any inteerence
received, including inteerence that may cause undesired operation.
Any Changes or modications not expressly approved by the pay
responsible for compliance could void the user's authority to operate
the equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to pa 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
inteerence in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
inteerence to radio communications. However, there is no guarantee
that inteerence will not occur in a paicular installation. If this
equipment does cause harmful inteerence to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to t to correct the inteerence by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in poable exposure condition
without restriction.
- 5 -
Customer Suppo
To Our Valued Customer,
Thank you for your purchase. If there is any quality issue
of the speaker, please feel free to contact us on Amazon
message seice or our Email se[email protected] . We
will follow up within 24 hours.
Sincerely,
INSMY
FCC ID: 2BA4Q-CLIP-S Made in China
