Quick Reference Guide: IW026 Wireless Earbuds
Product Specifications | Model Number | IW026 | | Pairing Name | IW026 | | Earbud Battery
| 30mAh (approx. 1.5 hours to charge) | | Case Battery | 200mAh (approx. 1.5 hours to charge) | |
Power Input / Output | Input: DC 5V/200mA | Output: DC 5V/20mA*2 |
Touch Controls & Operation
Your earbuds are controlled using the multi-function button on either the left or right earbud:
Power On: Remove earbuds from the case, OR press the button for 3 seconds.
Power Off: Place earbuds back into the case, OR long-press the button for 5 seconds.
Play / Pause: Click the button once.
Volume Up / Down: Click the button twice (double-click).
Skip / Previous Track: Click the button three times.
Answer / Hang Up Call: Click the button once during an incoming or active call.
Reject Call: Long-press the button for 2 seconds during an incoming call.
Pairing Instructions:
1. Remove the earbuds from the case (or press the buttons for 3 seconds) to automatically
enter pairing mode.
2. Open the Bluetooth/Wireless settings on your device.
3. Select "IW026" from the list of available devices to pair. (Note: After the first successful
pairing, the earbuds will automatically reconnect to your device when turned on.)
Charging Guide
Charging the Earbuds:
Fully charge the earbuds before the first use.
Place the earbuds into the charging case; they will begin charging automatically.
A red indicator light on the earbuds means they are charging.
The red light will turn off when fully charged.
Note: Inside the case, blue indicator lights will also turn off once the earbuds are fully
charged.
Charging the Case:
Fully charge the charging case before the first use.
Plug a Type-C cable into the case and connect it to a USB power source.
The battery indicator lights on the case will light up during charging.
FCC ID:2BU8M-BKCQ002
When fully charged, all four indicator lights will remain solid on. As the case battery
drains through use, these lights will turn off one by one.
Safety & Compliance Notices
Environment: Keep away from children, open flames, and extreme temperatures (heat,
cold, humidity), as this will negatively impact performance.
Care: Do not tamper with or disassemble the earbuds.
FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Warning: (1) Using earbuds at high to moderate volumes for extended periods of time
will result in permanent hearing damage. It is advised you keep volume levels moderate
to low at times for your safety. (2) Do not use while driving a car, cycling, operating
machinery, or performing other activities that require hearing surrounding sounds. (3) Do
not use earbuds in thunderstorms, the earbuds may not work properly in the condition,
and increase the risk of bringing hit by lightning. (4) Do not use any corrosive cleaner /
oil to clean the earbuds. (5) If the earbuds come in contact with liquid, please wipe it off
immediately. (6) If submersed in water, do not turn the earbuds on until completely dried.
(7) Please use the original charging cable provided by the earbuds manufacturer for
charging and choose the right adapter.
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarant ee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environm ent. This transmitter must not be co‐located or operating in conjunction with
any other antenna or transmitter.
