Visit our website at: https://www.harborfreight.com
Email our technical support at: [email protected]
350 LB
HEAVY DUTY
MECHANIC’S
ROLLER SEAT
59639
TM
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s Date number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 25k
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
Copyright
©
2023 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Page 2 For technical questions, please call 1-800-444-3353. 59639
Specifications
Overall Dimensions 19.18″ L x 16.5″ W x 17.19″ H
Drawer Dimensions 9.50″ L x 12.31″ W x 2.12″ H
Tool Tray Dimensions 15.81″ L x 10.25″ W x 1.33″ H
Max. Weight Capacity 350 lb*
IMPORTANT SAFETY INFORMATION
1. Assemble only according to these
instructions. Improper assembly
can create hazards.
2. Wear ANSI-approved safety goggles
and heavy-duty work gloves
during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the
area during assembly.
5. Do not assemble when tired
or when under the influence of
alcohol, drugs or medication.
6. Weight capacity and other product
capabilities apply to properly and
completely assembled product only.
7. This product is not a toy. Do not allow
children to play with or near this item.
8. Use as intended only.
9. Inspect before every use; do not use
if parts are loose or damaged.
10. Do not exceed weight capacity of 350 lb.
Be aware of dynamic loading!
Sudden load movement may
briefly create excess load
causing product failure.
11. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
12. Store idle equipment. When not in
use, this product must be stored
in a dry location to inhibit rust.
13. Replacement parts and accessories.
When servicing, use only
identical replacement parts.
14. The warnings, cautions, and instructions
discussed in this instruction manual
cannot cover all possible conditions
and situations that may occur. It must
be understood by the operator that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the operator.
Page 3For technical questions, please call 1-800-444-3353.59639
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
1. Slide locking tabs on Tray (7) into slots
on both Connecting Plate(s) (6).
2. Install the Tray and Connecting Plates
onto both Support Frame(s) (8). Be
sure to align the holes and each end
with the holes in the Support Frames.
3. Install the Casters (5) through
the holes in the Connecting
Plates and Support Frames.
4. Thread the Nuts (4) onto each caster.
5. Attach Drawer Assembly (3) and
Seat Cushion (1) to Support Frame
using Washers (10) and Bolts (9)..
6. Tighten all hardware before using.
Note: Use a thread locking compound on
the threaded caster stems before assembly.
Note: To make assembly easier only
thread fasteners a few turns. Once
seat is completely assembled tighten
all hardware to its proper torque.
Parts List and Diagram
Part Description Qty
1 Cushion 1
2 Plug 4
3 Drawer Assembly 1
4 Nut 4
5 Swivel Caster 4
6 Connecting Plate 2
7 Tray 1
8 Support Frame 2
9 Bolt 4
10 Washer 4
Record Date Code Here:
Note: If product has no Date Code, record
month and year of purchase instead.
Note: Some parts are listed and shown
for illustration purposes only, and are
not available individually as replacement
parts. Specify UPC 193175477040
when ordering parts.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER
OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE
BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR
THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS,
AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality
and durability standards, and warrants to the original purchaser that this product is free from
defects in materials and workmanship for the period of 90 days from the date of purchase.
This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence
or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,
normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,
injuries to persons or property, or for incidental, contingent, special or consequential damages
arising from the use of our product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation of exclusion may not apply to you.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation
charges prepaid. Proof of purchase date and an explanation of the complaint must accompany
the merchandise. If our inspection verifies the defect, we will either repair or replace
the product at our election or we may elect to refund the purchase price if we cannot readily
and quickly provide you with a replacement. We will return repaired products at our expense,
but if we determine there is no defect, or that the defect resulted from causes not within
the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
26677 Agoura Road • Calabasas, CA 91302 • 1-800-444-3353
TM
