Technical Support and E-Warranty Certificate
www.vevor.com/support
MAGNET FISHING KIT
USER MANUAL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
Model:MGL75-2A
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
Fishing Magnet Kit
- 2 -
1. Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating.
2. Failure to follow the safety rules and other basic safety precautions may result
in serious personal injury.
GENERAL SAFETY RULES
1. This type of fishing magnet has an extremely strong magnet force. Please don’t
put fishing magnet near any item that is in iron material .
2. Please put the fishing magnets far away from one another to avoid sticking
together and making it difficult to separate .
3. Please be careful of your hands whenever handling the fishing magnet so as
not to be caught when it stick to items .
4. Children and minors are not allowed to use this product to avoid causing
personal injury.
5. The safety precautions and instructions given in this manual are unable to
cover in detail all the conditions and situations that may arise.
6. The operator and/or user must use common sense and caution when operating
the product especially for any matters that are not referred in the above
SAVE THESE INSTRUCTIONS
- 3 -
MODEL AND PARAMETERS
Model
MGL75-2A
Pulling Force Each Side
600lbs
Magnetic Direction
Two-sided
Magnet Dimensions
D75mm x H25mm
Magnet Material
NdFeB(N35)+Carbon Steel
Color
Silver
Rope
Terylene Φ6mm*L2000cm
STRUCTURE DIAGRAM
1. Magnet (Two-side) 2. Outer Steel Covering 3. Eye Bolt
4. Safety Buckle 5. Rope 6. Hook 7.Thread Locker 8.Case
- 4 -
COMPONENTS
NO.
Name
MGL75-2A
1
Magnet（Two-side）
1
2
Rope
1
3
Gloves
1
4
Hook
1
5
Case
1
6
Thread Locker
1
7
User Manual
1
OPERATING INSTRUCTION
Installation Preparation:
1. Please prepare a mat and you need to spread out all the accessories.
2. Please open all the boxes to check that the accessories are complete and in
good condition.
INSTALLATION
Step1：Put the gasket on the eye bolt, apply the thread locker, and then screw on
the magnet, as shown below.
Note:Depending on the use, only an eye bolt is needed at a time.
- 5 -
Step2：Lock the safety buckle on the rope to the eye bolt.
Step3:Put on gloves and put the fishing magnet into water slowly, and at the same
time, hold rope tightly by hand.
Step4: Then you may enjoy your fishing.
Note:
1) If the hook is used, the operation method is the same as above.
2) Do not exceed the Pulling Force of the magnet. Otherwise the magnet will be
damaged .
MAINTENANCE
1. After using the fishing magnet, clean it with a dry towel and lay it under
sunshine to ensure it is dry completely .Then , put it back into the case in dry cool
environment.
2. Dry the rope. Put them back in the case,too.
3. Each time before using the fishing magnet, please check whether the eye bolt
on the fishing magnet is loose or not. Please apply the thread locker if it is loose.
Make sure the rope is in good condition to guarantee your safe fishing journey.
- 6 -
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW
2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place,
Rancho Cucamonga, CA 91730
Made in China
Technical Support and E-Warranty Certificate
www.vevor.com/support
