Read this user manual with diagrams carefully before using this product and
store it properly for future reference.
Wet and Dry Vacuum Cleaner User Manual
03
English 03
Français 11
Deutsch 19
Italiano 27
Español 35
Nederlands 43
Polski 51
Norsk 59
Svenska 67
Português 75
Suomi 83
Contents
04 Safety Information
05 Product Introduction
05 Product Installation
05 Instructions for Use
07 Routine Maintenance
08 Basic Parameters
08 Status Indicator Guide
09 Common Issues
10 EU Declaration of Conformity
10 WEEE Information
10 Warranty Information
0404
Usage Restrictions
•
Do not use this product outdoors or in any
commercial or industrial environments. It is
intended for home use only.
•
Do not store the product anywhere in a car to
avoid high or low temperatures affecting its
battery life.
•
The battery pack of this cleaner cannot be used
for charging or discharging in environments
with high humidity, or temperatures above 40°C
(104°F) or below 4°C (39°F).
•
Use the maintenance brush carefully to avoid
injury. Keep out of reach of children.
•
Children should be supervised to ensure that they
do not play with the appliance.
•
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety
(CB).
•
This appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use
of the appliance in a safe way and understand the
hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall
not be made by children without supervision (EU).
•
Keep hair, loose clothing, fingers, and all parts of
the body away from openings and moving parts.
•
Keep limbs and pets away from the rotating
brush heads to avoid injury.
•
Do not touch the power cord, nor operate the
product with wet hands to prevent injuries.
Safety Information
•
Do not vacuum any burning or smoking
substances (such as non-extinguished cigarette
butts).
•
Do not vacuum any hard or pointy objects (such
as building materials, glass, and nails).
•
This product is only to be used in areas below
3,000 meters above sea level.
•
When self-cleaning and drying, the
temperature of accessible surfaces of the
charging dock, roller and vacuum cleaner will be
high. Please do not touch the surfaces which are
prone to getting hot during use. Only touch after
the surfaces have cooled down.
•
Do not vacuum cords or other cables to avoid
danger.
•
Only use the product in accordance with the User
Manual. Any loss or damage caused by improper
use will be borne by the user.
•
Do not charge non-rechargeable batteries.
•
This product contains batteries that are only
replaceable by skilled persons.
•
For the purposes of recharging the battery, only
use the detachable docking station roborock
MDS18HRR provided with this product.
•
Do not use any third-party batteries, power cords
or docks.
•
To reduce the risk of injury from moving parts,
keep the power off before servicing.
•
Do not disassemble, repair or modify the battery,
power cord or the dock.
•
Do not charge the vacuum or install the dock
near heat sources or in humid areas (such as
radiators or bathrooms).
•
Do not wipe the power cord or the dock with a
wet cloth, nor touch them with wet hands.
Battery and Charging
WARNING
•
If the power cord is damaged or broken,
immediately stop use and contact the after-sales
service.
•
If the product is not going to be used for an
extended period of time, fully charge it, unplug its
power supply, and place it in a cool and dry place.
•
Make sure that you recharge it once every three
months to avoid battery overdischarge.
•
Do not discard waste batteries. Leave them with a
professional recycling organization.
Transportation
Note
•
It is recommended to transport the product in its
original packaging.
•
Rinse the filter at least once a month with tap
water. For details please refer to the Routine
Maintenance section.
05
Product Introduction
A
A1
Vacuum Cleaner
•
Press: Switch between ECO/Max modes
•
Press and hold for 2 seconds when
the vacuum cleaner waiting for
orders: Turn on/off voice messages /
Adjust volume
—Switch Mode
•
Press: Start/Pause
•
Press and hold for 2 seconds when
the vacuum cleaner waiting for
orders: Power off
—Power
•
Press while charging: Start self-
cleaning and drying
•
Press and hold for 2 seconds while
charging: Start drying
•
Press while self-cleaning or drying:
Pause/Resume self-cleaning or
drying
—Self-Clean
A1-1—Speaker
A1-2—Handle
A1-3—Handle Release Hole
A1-4—Roller Release Tab
A1-5—Wheels
A1-6—Status Indicator
A1-7—Dirty Tank Release
A1-8—Dirty Tank Handle
A1-9—Dirty Tank
A4
Filter
A3
Power Cord
A5
Maintenance Brush
The maintenance brush can be placed in the
groove at the back of the charging dock.
Note:
A2
Drying & Charging Dock
A2-1—Drying Tray
A2-2—Drying Air Outlets
A2-3—Charging Contacts
To stop self-cleaning or drying, press the button
while charging.
Note:
B1-1—Connect the handle to the main body
until it clicks into place. The buttons
on the handle should face forward.
Product Installation
B
B1
Fitting the Handle
B1-2—To detach the handle, hold it firmly
and pull it out while inserting a hard
B2-1—Place the charging dock upside
down, connect the power cord to
the socket of the charging dock, and
loop the cord inside the cord storage
slot as required.
B2-2—Place the charging dock on a flat,
hard floor and plug it in.
The power cord can exit from either the right or
left cord storage slot opening.
Note:
B2
Positioning the Charging Dock
B2-3—The maintenance brush can be
placed in the groove at the back of
the charging dock.
Do not place the charging dock in humid
locations or near any heat sources, such as bathrooms,
kitchens, and radiators.
Note:
Instructions for Use
C
Press and hold the and buttons for 3
seconds to start language selection, then
press the
button to change language.
To confirm your selection, stay upon your
preferred language for 10 seconds or press
the
button.
Language Selection
A6-1—Status Indicator
A6
Status Indicator
•
Blue indicator: Normal operation
•
Red indicator: Abnormality or error
A1-10—Clean Tank Refill Port
A1-11—Clean Tank Release
A1-12—Clean Tank
A1-13—Roller
object into the handle release hole
on the back of the main body to press
the release button.
0606
C1-1—Grip the clean tank handle, press the
release button, and gently pull the
clean tank upwards at a slight angle
to uninstall the tank.
C1
Filling the Clean Tank
C1-2—Open the cap of the clean tank refill
port, add tap water, and then close
the cap.
Notes:
•
To avoid deforming the clean tank, only use cold water.
•
To prevent corrosion or damage, do not use
any disinfectant and only use cleaning solutions
recommended by Roborock.
•
To improve cleaning performance, we recommend
that you add a 1/4 bottle cap of the recommended
cleaning solution to a full tank of water for use.
C1-3—Place the clean tank back to the
cleaner head. Push it down gently
until it clicks into place.
Always lay the vacuum cleaner flat with the buttons
on the handle facing up.
Note:
Pull the handle to unlock the vacuum
cleaner, and press the
button to start it.
C3
Starting the Vacuum Cleaner
C4
Lay-Flat Cleaning
Press the button to switch between ECO
and MAX modes. The status indicator will
flash based on the current mode.
C5
Mode Switching
The vacuum cleaner can be laid flat to
clean under furniture. To lay it flat on the
floor, lower the handle while using the
machine. The available capacity of the dirty
tank decreases during lay-flat cleaning.
Therefore, it is recommended to empty the
dirty tank before cleaning under furniture.
1. Press the
button during cleaning
to pause the vacuum cleaner. It is now
waiting for orders.
Wait for Orders and Power off
C2
Locking and Unlocking
C2-1—Locked
C2-2—Unlocked
Lightly step on the cleaner head and hold the
handle. Push it to lock the vacuum cleaner,
and pull it to unlock the vacuum cleaner.
When the dirty tank is full during use, the
vacuum cleaner will provide audio and
1. Lock the vacuum cleaner when it is waiting
for orders and place it on the charging
dock. Charging starts when you hear
the "Charging started. Please start self-
cleaning." voice massage.
2. Press the
button to start/pause
self-cleaning.
Water Level Alerts
C7
Charging and Self-Cleaning
C6-3—Reinstall the tank cover. Tilt the dirty
tank, insert its bottom back in the
vacuum cleaner, and then push it
gently until it clicks into place.
C6
Emptying the Dirty Tank
C6-1—Hold the dirty tank handle, press the
release button, and pull out the dirty
tank.
C6-2—Gently pull out the tank cover, and
empty the dirty tank.
3. After self-cleaning and drying are
completed, follow the voice message and
empty the dirty tank timely to prevent odors.
2. Lock the vacuum cleaner when it is waiting
for orders so that it can stand upright on
the floor.
3. If the vacuum cleaner is left idle for 5
minutes when it is waiting for orders, it will
automatically turn off. To manually turn
it off, press and hold the
button for 2
seconds when it is waiting for orders.
When the dirty tank is full, the red indicator will
stay on.
Note:
visual alerts. In this case, empty the dirty
tank prior to resuming cleaning.
Notes:
•
Make sure that the clean tank and dirty tank are in place
for optimum self-cleaning and drying performance.
•
The product is equipped with a built-in high-performance
lithium-ion rechargeable battery pack. To maintain
battery performance, keep the product charged for
normal use.
07
When self-cleaning is completed, drying will
start automatically. During charging, press
and hold
for 2 seconds to start drying
manually.
•
Drying will automatically start after self-cleaning
completes. Do not often start drying manually.
•
Self-cleaning and drying are available only when the
vacuum cleaner is being charged and with a high
battery level.
•
Stay away from the drying air outlets during drying.
•
If the Charge & Sleep mode is disabled and the
machine is shut down, ensure the machine is on the
charging dock, press the
button to turn it on, and
then start drying.
Notes:
Drying
Part
Maintenance
Frequency
Replacement
Frequency
Roller As needed 3 months
Filter As needed As needed
Cleaner Head
and Dirty
Water Pathway
As needed N/A
Dirty Tank As needed N/A
Charging Dock As needed N/A
Charging
Contacts
As needed N/A
Clean Tank 2-4 weeks N/A
Product Maintenance
Wipe and clean the vacuum cleaner with a soft,
dry cloth. Before cleaning, remove the vacuum
cleaner from the charging dock and power it off.
Vacuum Cleaner
D1
Dirty Tank and Filter
Notes:
•
Allow at least 24 hours for the filter to dry thoroughly
before reinstalling it.
•
Do not touch the filter surface with hands, brushes, or
sharp objects to avoid damaging it.
D1-2—Dry all the parts thoroughly before
reinstalling them back in place.
To maintain optimal performance of the
vacuum cleaner, refer to the following table
for routine maintenance:
Routine Maintenance
D
•
The vacuum cleaner must be powered off or stopped
running, and the charging dock unplugged before you
clean or maintain them.
Notes:
If this product is left unused for a prolonged
period of time, fully charge it, unplug it,
and store it in a cool and dry place. Do not
place it in humid locations or direct sunlight.
Charge it at least once every 3 months to
avoid battery overdischarge.
•
Always place the vacuum cleaner back on the charging
dock after use to avoid leaving water stains on the floor.
•
If the Charge & Sleep mode is disabled and the
machine is shut down, ensure the machine is on the
charging dock, press the
button to turn it on, and
then start self-cleaning.
D1-1—Uninstall the dirty tank, pull out the
tank cover, and remove the filter on
the tank cover. Use the provided
maintenance brush to clean the
debris on the filter. If the filter is very
dirty, rinse it with cold water and
shake off the remaining water.
The Charge & Sleep mode is disabled by
default. To enable or disable it, press the
button for 5 seconds while charging until
you hear the voice message: "Charge &
Sleep mode enabled" or "Charge & Sleep
mode disabled."
Enable/Disable Charge & Sleep
Mode
•
Charge & Sleep mode enabled: After the machine
has been charging for 5 minutes without operation,
the LED display will turn off. After the machine is fully
charged, it will not automatically shut down. To start
Notes:
self-cleaning and drying, press the
button. If the
machine is removed from the charging dock, it will
remain active, waiting for orders.
•
Charge & Sleep mode disabled: Five minutes after
the machine is fully charged, it will automatically shut
down. To start self-cleaning and drying, ensure the
machine is on the charging dock, press the
button
to turn it on, and then press the
button. If the
machine is removed from the charging dock, it will not
remain active and wait for orders.
•
The frequency of replacement may vary with the actual
situation. If abnormal wear occurs, replace the parts
immediately.
•
The filter and roller fibers have been treated with silver
ion antimicrobial agent to resist bacterial odors.
0808
D2-4—When you need to replace the roller,
pull the roller cap out of the roller by
grabbing the whole cap. Then, install
the roller cap to a new roller.
D2-3—Grab the roller release tab and pull
the roller out along the cleaner head.
Use the provided maintenance brush
to remove the dirt on the roller, then
rinse it with clean water.
D2-1—Grip the clean tank handle, press the
release button, and gently pull the
clean tank upwards at a slight angle
to uninstall the tank.
D2
Clean Tank and Roller
D2-2—Rinse the tank bottom with clean water.
D2-5—Reinstall the roller and clean tank.
1. Power off the vacuum cleaner and place it
in a stable position, then remove the dirty
tank, clean tank, and roller.
2. Clean the roller slot and dirty water pathway
with the provided maintenance brush.
3. Reinstall the dirty tank, clean tank, and roller.
Do not rinse the cleaner head directly with water.Note:
D3
Cleaner Head and Dirty
Water Pathway
Unplug the charging dock and use a soft, dry
cloth to clean its surface and the charging
contacts.
Do not rinse the charging dock directly with water.Note:
D4
Charging Dock
Model WD5M7B
Rated Voltage/
Current
21.6 VDC 8.8 A
Battery
21.6 V/2500 mAh (TYP)
Lithium-ion battery
Vacuum Cleaner
Basic Parameters
Dock Charger
Model MDS18HRR
Rated Input
Voltage
220-240 VAC
Rated
Frequency
50-60 Hz
Rated Input
(Charging)
0.35 A
Rated Input
(Drying)
3 A
Rated Output 30 VDC 1 A
Charging
Battery
21.6 V/2500 mAh (TYP)
Lithium-ion battery
Notes:
•
Use the maintenance brush carefully to avoid injury.
•
When you detach the roller cap, do not pull it by its
handle.
•
To prevent potential damage, keep the roller cap
attached while cleaning the roller.
Machine Status Status Indicator
Charging
Blue indicator
gradually brightens
Fully charged /
Operating, battery
level
≥
20%
Blue indicator stays
on
Battery level
＜
20%
Blue indicator flashes
slowly
Switch mode
successfully
Blue indicator flashes
quickly
Battery is
undervoltage
The indicator
flashes red and blue
alternately then goes
off
Dirty tank is full
Red indicator stays
on
Other errors
Red indicator keeps
flashing
Status Indicator Guide
Blue indicator represents normal
operations, and red indicator represents
errors or abnormalities.
09
Common Issues
Issue Solution
There are obvious water stains on the floor,
the cleaner head leaks water, or water
cannot be vacuumed from the floor.
•
Remove the roller and dirty tank, check the dirty tank pathway and the suction port inside
the roller slot for any clogging, and check if the filter is clogged or wet. Confirm that the
dirty tank and filter are properly installed, then try again.
The indicator does not light up and the
vacuum cleaner cannot start.
•
Low battery level. Charge it before use.
There is an unpleasant smell during use.
•
Clean the roller, dirty tank and filter.
Cleaning creates a lot of foam.
•
Do not add any disinfectant to the clean tank or spray it on the floor. Only use cleaning
solutions recommended by Roborock in the clean tank.
•
Do not over-add the recommended cleaning solution.
The vacuum cleaner does not charge when
docked.
•
Clean the charging contacts on the charging dock and vacuum cleaner.
The indicator is on, but the vacuum cleaner
does not respond on button pressing.
•
Press and hold the
button for 2 seconds to force a power-off, then restart the machine.
Is power always being drawn when the
vacuum cleaner is on the dock?
•
The vacuum cleaner will consume power while it is docked to maintain battery performance,
but the power consumption is extremely low.
1010
We Shenzhen Roborock Innovation Technology Co., Ltd. hereby declare that this equipment is in compliance with the applicable Directives
and European Norms, and amendments. The full text of the EU declaration of conformity is available at the following internet address:
https://global.roborock.com/pages/compliance
EU Declaration of Conformity
WEEE Information
Correct Disposal of this product. This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmentally safe recycling.
Warranty Information
The warranty period depends on the laws of the country in which the product is sold, and the warranty is the responsibility of the seller.
The warranty only covers defects in material or workmanship.
The repairs under warranty may only be carried out by an authorized service centre. When making a claim under the warranty, the original bill
of purchase (with purchase date) must be submitted.
The warranty will not apply in cases of:
•
Normal wear and tear.
•
Incorrect use, e.g. overloading of the appliance, use of non-approved accessories, use of force.
•
Damage caused by external influences.
•
Damage caused by non-observance of the user manual, e.g. connection to an unsuitable mains supply or non-compliance with the
installation instructions.
•
Partially or completely dismantled appliances.
