2 5/8"
(66.68mm)
8 5/8"
(219.1mm)
2 1/2"
(63.5mm)
3 1/2"
(88.9mm)
4"
(101.6mm)
1 1/4"
(31.75mm)
1 5/8"
(41.28mm)
a. Drain Body
b. Thin Gasket
c. Concave Washer
d. Plastic Washer
e. Mounting Nut
f. Gasket
g. Tailpiece
h. Nut
b
c
d
e
R
INSPIRED FOR LIVING
TM
Installation Instructions
PU25 - DIAGRAM AND PARTS BREAKDOWN
SPECIFICATIONS
PU25
Begin by removing the nut (h), tailpiece (g), mounting
nut (e), plastic washer (d) and concave washer (c)
from the drain body (a).
a.
b.
c.
d.
e.
f.
g.
h.
Install the drain body (a), with the thin gasket (b) attached,
into the drain hole of the vanity bowl. From underneath
the bowl, attach concave washer (c) (narrow end facing
up), plastic washer (d) and mounting nut (e) to the drain
body (a).
Tighten the mounting nut (e) with an adjustable wrench
until snug. Thread the nut (h) with the tailpipe (g)
attached, onto the drain body (a) and hand tighten.
NOTE: Make sure the tailpipe gasket (f) is installed into
the tailpiece.
Connect the tailpiece (g) to the p-trap.
CARE & MAINTENANCE INSTRUCTIONS
To keep your drain clean & functioning correctly, please
follow these steps below:
1. Rinse with clean water & dry with a soft cloth.
2. Do not clean with acid, polish, abrasives or harsh
cleaners on your drain.
3. Do not use abrasive scouring pads.
a
f
g
h
1
2
3
4
e
g
a
