FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: 1) this device may not cause harmful interference, and 2) this device
must accept any i nterference r eceived, i ncluding i nterference t hat may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by t he party r esponsible f or
compliance could void the user’s authority to operate the equipment.
ISED Statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Cet appareil contient des émetteurs/récepteurs sans licence conformes aux norms
CNR d'Innovation, Sciences et Développement économique Canada. Son
fonctionnement est assujetti aux deux conditions suivantes :
(1) Cet appareil ne doit pas causer d'interférence ; et
(2) Cet appareil doit tolérer toute interférence, y compris celles qui pourraient
entraîner un fonctionnement indésirable.
RF Exposure Statement
SAR tests are conducted using standard operating positions according standards with
the device transmitting at its highest certified power level in all tested frequency bands,
although the SAR is determined at the highest certified power level, the actual SAR
level of the device while operating can be well below the maximum value.
This model product has been tested and meets the RF exposure guidelines SAR
Limit 1.6W/Kg with the test distance 0mm for body worn. The highest SAR
1g
value is
0.72 W/Kg. The use of belt clips, holsters and similar accessories should not
contain metallic components in its assembly. The use of accessories that do not
satisfy these requirements may not comply with RF exposure requirements, and
should be avoided
Les tests SAR sont effectués en utilisant des positions de fonctionnement standard
conformément aux normes, l'appareil émettant à son niveau de puissance certifié le
plus élevé dans toutes les bandes de fréquences testées. Bien que le SAR soit
déterminé au niveau de puissance certifié le plus élevé, le niveau SAR réel de
l'appareil en fonctionnement peut être bien inférieur à la valeur maximale.
Ce produit modèle a été testé et répond aux directives d'exposition aux
radiofréquences, limite SAR de 1,6 W/kg avec une distance de test de 0 mm pour un
port sur le corps. La valeur SAR1g la plus élevée est de 0,72 W/Kg. Les attaches de
ceinture, étuis et accessoires similaires ne doivent pas comporter de composants
métalliques. L'utilisation d'accessoires non conformes à ces exigences peut entraîner
une non-conformité aux exigences d'exposition aux RF et devrait être évitée.
The device is restricted to indoor use only when operating in the 5150 to 5250MHz
frequency range.
L'appareil est limité à une utilisation à l'intérieur seulement lorsqu'il fonctionne dans
la gamme de fréquences de 5150 à 5250 MHz.
S26ultra
