USER GUIDE
Start Here
Serenelifehome.com/register
Inflatable Stand-Up Paddle-Board
www.SereneLifeHome.com
2
California Prop 65 Warning
WARNING:
This product may expose you to chemicals, which is known to
the state of California to cause cancer, birth defects and other
reproductive harm. Do not ingest.
For more info go to: www.P65warnings.ca.gov
This manual provides general guidelines and may not cover
all features of your model. It may also describe features not
available on your specic unit. Features are subject to
change without notice.
FOR YOUR SAFETY
• Check your board & equipment before going into the water.
• Try to avoid going out on the water alone.
• Always have a means of communication while on the water.
• Check weather conditions and tides before heading out.
• Avoid paddling when winds are blowing away from shore.
• Be aware of tides and water ow, and how they may aect your
travel time.
• Wear a wetsuit or drysuit as needed.
• Always wear a life jacket or a otation device.
• Always wear your board leash.
• Take a rst aid course, and always carry rst aid equipment.
• Do not go out on the water if you cannot swim.
• Avoid going on the water if you have been drinking or are under
the inuence of drugs.
Features:
• Stand-Up Paddleboard (SUP)
• Single-Person Inatable Platform
• Water-ready with Everything Needed to Paddle
• Stable Design for Children, Teens, and Adults
• Marine-Grade, Waterproof, Corrosion-Resistant Build
• Lightweight, Portable, and Convenient
• Hassle-Free Setup for Quick Water Fun
• Advanced Double-Welded Seam
• Easy to Inate and Deate
• Non-Slip EVA Deck Pad
• Wide/Stable Shape
• Quick Fin Installation and Removal
• Ideal for Beginner to Intermediate Paddlers
• Suitable for Lakes, Rivers, or Oceans
• Some models include Pet-Friendly Design, Smooth Surface,
Transparent Viewing Window, and Universal GoPro Mount
www.SereneLifeHome.com
3
INTRODUCTION
IMPORTANT! PLEASE READ THIS MANUAL CAREFULLY, AND
IN ITS ENTIRETY, BEFORE INFLATING, ASSEMBLING OR USING
YOUR FREE-FLOW WELDED INFLATABLE STAND-UP
PADDLE-BOARD.
Thank you for purchasing our Free-Flow Welded Inatable
Stand-Up Paddle-Board. This versatile and durable paddleboard
is designed for users of all skill levels, providing an excellent way
to enjoy water activities such as paddling, surng, and more.
This manual will guide you through the setup, usage, and
maintenance of your paddleboard to ensure you have the best
experience possible. Please read it carefully before use.
What’s in the Box:
• Inatable SUP Paddleboard
• Double-Action Hand Pump
• (1) 3-Piece Aluminum SUP Paddle
• (1) Leash
• (1) Removable Fin
• (2) Side Fins (where applicable)
• Repair Kit
• Black Backpack
Technical Specications
• SLSUPB010: Dimensions: 10' x 33" x 6",
Max. Weight Capacity: 350 lbs., Item Weight: 7.8 lbs.
• SLSUPB0106: Dimensions: 10.6' x 33" x 6",
Max. Weight Capacity: 350 lbs., Item Weight: 8.35 lbs.
• SLSUPB011: Dimensions: 11' x 32" x 6",
Max. Weight Capacity: 350 lbs., Item Weight: 8.65 lbs.
• SLSUPP04: Dimensions: 11' x 35" x 6",
Max. Weight Capacity: 440 lbs., Item Weight: 9 lbs.,
Features: Pet-Friendly, GoPro Mount
• SLSUPP05: Dimensions: 11.6' x 35" x 6",
Max. Weight Capacity: 440 lbs., Item Weight: 8.86 lbs.,
Features: Smooth Surface
• SLSUPCL01: Dimensions: 10.6' x 32" x 6",
Max. Weight Capacity: 350 lbs., Item Weight: 7.9 lbs.,
Features: Transparent Viewing Window, GoPro Mount
Additional Specications
• Construction Material: Single-Layer Drop-Stitch
• Recommended Air Pressure Ination: 13 PSI (0.89 Bar)
• Water Fun for Ages: 10+
www.SereneLifeHome.com
4
WHAT’S WHAT?
STAINLESS D-RING
BUNGEES
MULTIFUNCTIONAL
D-RING
GRAB HANDLE
GRAB HANDLE
INFLATION AIR VALVE
EVA DECK PAD
• Heavy-Duty Drop-Stitch PVC
• Heavy-Duty Built-In Carrying Handles
• Large EVA Foot Pad: The board features a large EVA foot pad for superior
grip and comfort.
• Removable Fin
HEAVY-DUTY STORAGE BACKPACK
High-capacity bag designed to store and transport
the board and its accessories.
FIN
Detachable 9-inch ns enhance
directional stability while paddling.
LEASH
Keeps you connected to
the board for added safety.
PUMP W/GAUGE
This manual pump inates your board by
inserting the end of the hose into the inate
port and pumping it to the proper PSI.
REPAIR BAG
In case of punctures or rips, includes
patches and a valve tool to quickly x
punctures or damage.
EXP - 3-PIECE PADDLE
Aluminum paddle with a large blade for better water contact.
The length can be customized to suit your height and preference.
Please note that the pictures shown are only to illustrate the
accessories and various parts of dierent models of boards.
www.SereneLifeHome.com
5
12”-18”
FOWARD
LEASH
Paddle Height: Paddles should be adjusted
to the correct length-approximately 12-18
inches above your head when standing.
Stand Still: Stand on the board with your
feet shoulder-width apart. Hold the T-handle
with one hand and the paddle shaft with the
other. Avoid looking down at your feet; keep
your gaze level with the horizon. Keep your
knees slightly bent for balance.
Always Put Your Leash On: Always wear
the leash to ensure safety while paddling.
Paddling: Place the paddle into the water at
an arm's length in front of you, then pull it
back along the board. Ensure both hands
are aligned, and the blade is vertical during
the stroke.
Surfer Pose: When catching a wave, shift
one foot slightly forward to improve balance
and agility.
SUP Paddle:
The paddle consists of three parts: a lightweight aluminum shaft
and a durable plastic blade. It provides eective directional
control for extended use.
How to adjust the length of the paddle?
1. Use the spring ball and lock mechanism for quick assembly.
2. Adjust the paddle to your preferred length, ensuring it does
not exceed the "STOP" mark.
3. If the paddle feels loose at the connection point, tighten it by
rotating the lock clockwise (refer to Figure 1).
Note: The ergonomic grip ensures
comfortable handling (see Figure 2).
Paddle section
Paddle stem section
Handle section
Figure 1.
Separaration
and Flxation of
Slurry Lock
TIGHTEN
LOOSE
www.SereneLifeHome.com
6
US Fin
1. Detach the plate from the screw (Figure 1) and place it
into the n slot via the gap (Figure 2).
2. Use the screw to slide the plate into place along the slot.
3. Insert the n into the n box slot via the central gap,
slide the n to the back, and rmly push down the other
end (Figure 3).
4. Line up the screw with the screw plate and tighten until
fully secured (Figure 4).
Operation of Valves
To inate the board:
1. Remove the valve cover and turn it
clockwise to set it to the "output" position.
2. Inate the board using the pump provided.
3. Once inated, screw the valve cover back
on counterclockwise.
Fin Type
We have two ways to install ns, which can be chosen according-
ly. Your SUP is either equipped with a Slide Fin, Screw Fin, or US
Fin. Please check your n type and follow the instructions below.
Tip: Before you begin, please ensure the n box slot is clean and
free of sand and grit.
Slide Fin
Slide the n into the n box. Ensure the n
and the card slot of the n box are in the
same position.
Insert the gasket into the slot to secure the
n in place.
Figure 1
Figure 2
Figure 1 Figure 2 Figure 3 Figure 4
www.SereneLifeHome.com
7
To deate the board: Press the valve core clockwise with your ngers. Do not use the black wrench to deate.
WARNING: Use only the pump provided or other recommended pumps. Do not use an air compressor to avoid over-ination and potential
board damage, which voids the warranty.
Note: The supplied black wrench is for tightening the valve only. Do not use it to deate the board.
Ination Process
1. Unroll your SUP on a smooth, clean surface.
2. Connect the air pump to the valve and secure the connection by pushing the air tap inwards and twisting it clockwise.
3. Check the recommended PSI on the valve and inate the board. Do not exceed the recommended PSI.
4. The pump gauge will start to register pressure at around 6-7 PSI. Continue inating until 12-15 PSI is reached.
5. Disconnect the pump and secure the valve once fully inated.
6. To deate the board press the valve core clockwise with your ngers. Do not use the black wrench to deate.
Important Notes:
• During ination, the gauge pointer begins to move once
pressure reaches 6-7 PSI. Continue inating until 12-15 PSI
is achieved.
• For optimal performance, avoid over-ination. If the board
will be exposed to heat or direct sunlight, slightly under-
inate to prevent pressure buildup.
www.SereneLifeHome.com
8
FAST SYSTEM: SWITCH-VALVE
TWO-WAY PUMP TEST
1. Detach the hose from the pump.
2. Fully press the air outlet with your
hand and push the pump handle
downward.
3. Check the pressure gauge needle;
if it moves, it indicates the ination
port, and the pressure gauge is
functioning correctly.
Note: The gauge will only register pressure after the air in the
board reaches 7 PSI. If the pointer does not move after multiple
tests, the gauge is damaged.
Recommendation: Inate the board to 12 PSI for standard use.
For any issues, contact customer service.
Closed Position
• 0 psi – 5 psi
• High pressure
• Single action
Opening Position
• 5 psi – 20 psi
• High capacity
• Double action
Air Valve Interface
at Both Ends
This valve has two functions:
• One end for air intake
• One end for air exhaust
Air valve
closed state
4. Fully press the air outlet with your
hand and lift the pump handle
upward.
5. If you feel a suction force on your
hand, it indicates the deation port.
www.SereneLifeHome.com
9
Start Here
Serenelifehome.com/pages/register
Model Number:
SLSUPB010
Storage and Care Tips:
1. Rinse the board with fresh water and allow it to dry completely
to prevent mildew.
2. Use mild soap for cleaning; avoid harsh chemicals.
3. Deate the board and store it in the provided protective bag.
Avoid rolling it too tightly.
4. Do not hang the board for storage.
5. Avoid storing the board in extreme temperatures (above 140°F
or below 23°F).
6. Keep the board in a cool, dry place to maintain its quality and
extend its service life.
Ination Tips and Precautions
• Inate the board using the provided hand or
electric pump. Start with an electric pump for 90% of the ination,
then switch to the hand pump for the nal pressure.
• Caution: Do not use air compressors, as they may overinate
and damage the board. Warranty is void if overination occurs.
• A slight pressure drop after 2-3 days is normal due to temperature
changes. Add more air if needed.
• Before long paddling sessions, inate the board for 24 hours to
ensure it’s airtight. Check for consistent pressure loss if needed.
• The maximum pressure is 12 PSI. When pressing the chambers,
they should feel rm but not overly hard.
• Avoid leaving the board fully inated in direct sunlight or hot
environments. Slightly underinate to allow heat to naturally
expand the air.
Board Care and Storage
The board is made from durable PVC for superior protection
against ultraviolet light. However, to extend its service life and
maintain bright colors, avoid storing the board in extreme
weather conditions or direct sunlight.
Register Product
Thank you for choosing SereneLife.
By registering your product, you ensure that you
receive the full benets of our exclusive warranty
and personalized customer support.
Complete the form to access expert support and
to keep your SereneLife purchase in perfect
condition.
Questions or Comments
We are here to help!
Phone: 1.718.535.1800
Serenelifehome.com/ContactUs
