USER GUIDE
Start Here
Serenelifehome.com/register
SLSUP925LED
Inflatable Stand-Up Paddle-Board
www.SereneLifeHome.com
2
California Prop 65 Warning
WARNING:
This product may expose you to chemicals, which is known to
the state of California to cause cancer, birth defects and other
reproductive harm. Do not ingest.
For more info go to: www.P65warnings.ca.gov
Important Warnings
• This board does NOT provide protection against drowning.
• Only use within recommended pressure levels.
• Designed for swimmers only—not a lifesaving device.
• Always supervise children in the water.
Prohibited Uses:
• Do not use in white water.
• Do not use in breaking waves.
• Do not use in oshore currents.
• Do not use in strong oshore winds.
• Not for children under 10 years old.
Usage Guidelines:
• Read instructions before use.
• Fully inate all air chambers before use.
• One adult per board only.
• Safe distance from shore: Maximum 150 meters (492 ft).
WARNING & SAFETY REMINDERS
Before Use:
• Inspect your board and gear before heading into the water.
• Avoid paddling alone—use the buddy system.
• Carry a communication device while on the water.
• Check weather conditions and tides before riding.
• Avoid paddling when winds are blowing away from shore.
While On the Water:
• Be aware of tides and currents to estimate your travel time.
• Wear a wetsuit or dry suit when needed.
• Always wear a life jacket or otation device.
• Take a rst aid course and carry rst aid equipment.
DO NOT:
• Use the board if you cannot swim.
• Go on the water if under the inuence of alcohol or drugs.
www.SereneLifeHome.com
3
Features:
• Stand-Up Paddleboard (SUP)
• Single-Person Inatable Platform
• Water-ready with Everything Needed to Paddle
• Stable Design for Children, Teens, and Adults
• Marine-Grade, Waterproof, Corrosion-Resistant Build
• Lightweight, Portable and Convenient
• Built-in LED Lights, Multiple Color Options
• Hassle-Free Setup for Quick Water Fun
• Smooth Surface
• Advanced Double-Welded Seam
• Easy to Inate and Deate
• Non-Slip EVA Deck Pad
• Wide/ Stable Shape
• Quick Fin Installation and Removal
• Ideal for Beginner to Intermediate Young Paddlers
• Suitable for Lakes, Rivers, or Oceans
What’s in the Box:
• SUP Paddle-Board
• Double-Action Hand Pump
• (3) Shaft Aluminum Paddle
• (1) Operating Box with Third Gen Battery
• (1) Leash
• (2) Small Fixed Fins
• (1) Big Removable Fin
• Repair Kit
• Backpack
Technical Specs:
• Construction Materials: Single-Layer Drop-Stitch +
Double-Layer Side
• Number of Battery: 3
• Battery Construction Material: ABS
• Type of Battery: Rechargeable
• Battery Voltage: 12V
• Milliamp Hours (mAh): 2200
• Battery Wattage: 24.42 Wattage
• Battery Cells: Lithium Ion
• Battery Weight: 437g (including box)
• Weight Amount Lithium Battery
(If the Battery is Lithium): 138g
• Water Fun for Ages: 10+
• Recommended Air Pressure Ination: 13 PSI (0.89 Bar)
• Max. Weight Capacity: 275 lbs.
• Item Weight: 18.94 lbs.
• Product Dimension (L x W x H): 10’6'' x 32'' x 6'' -in. (Inated)
www.SereneLifeHome.com
4
INTRODUCTION
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE
REFERENCE.
Inatable stand-up paddleboards (ISUPs) are an excellent option for camping trips, boating, and riders with limited transport
or storage space. The board is impressively sti due to its high-quality materials and professional design.
Our premium Drop-Stitch construction ensures unmatched stability and rigidity within the inatable product category.
This manual has been compiled to help you operate your inatable Stand-Up Paddleboard (hereinafter referred to as ISUP)
safely and enjoyably. It contains details about the ISUP, the equipment provided, and their proper operation. Please read it
thoroughly and familiarize yourself with the ISUP before use.
Even the strongest ISUP can be severely damaged if not used properly. Improper use is incompatible with safe boating.
Always adjust the ISUP’s speed and direction according to water conditions.
All users must wear a suitable buoyancy aid (life jacket or personal otation device) when using the ISUP. In some countries,
wearing a buoyancy aid that complies with national regulations is legally required at all times.
www.SereneLifeHome.com
5
ISUP Structure Terminology
Drop Stitch: 2600g/sq. meter
GoPro Mount
D-Ring
EVA Foot Pad:
Provides excellent grip
and comfort
Heavy-Duty Carry Handle
High-Pressure Recessed Valve:
Allows for quick and easy
ination/deation
D-Ring: Stainless steel ring for
attaching a safety leash (optional)
Tri-Fin Set:
Includes one center n
and two smaller side ns
Important Information
• Read the product instructions thoroughly before use.
Store the manual for future reference.
• Inspect the product carefully after opening the package.
If you discover any damage, contact the after-sales
department immediately.
Paddle Backpack Hand Pump
Repair Kit Fins
Operating Box
pvc
www.SereneLifeHome.com
6
SET-UP PREPARATION
1. Unfold the Board
• Choose a smooth, clean surface to unfold the board.
• Roll out the board until it lays at with the top side facing up.
2. Valve Operation
Follow the steps below for proper valve operation and correct ination/deation procedures:
• The ination valve is located near the nose of the board.
• For ination: Ensure the center valve pin is in the “UP” position. If the pin is in the “DOWN” position, press it once to return
it to the “UP” position.
• For deation: Press the valve pin to the “DOWN” position. You do not need to twist it.
Important:
• Avoid sand or debris around the valve during deation, as small particles may become airborne when air pressure is released.
• Always lock the valve cover over the valve stem during use to prevent accidental air release or entry of debris into the air
chambers.
1 2 3
www.SereneLifeHome.com
7
3. Board Ination Steps
a. Unscrew the valve cap and press down the valve pin to open the valve. Let air naturally ow into the board to save time.
Once some air has entered, press the valve pin again to return it to the “UP” position.
b. Ensure the pump hose is connected to the “INFLATE” outlet.
c. Connect the pump nozzle to the valve receptacle using a half-twist motion (clockwise).
d. Pump air into the board by sliding the pump piston up and down. Inate until the required pressure is reached:
• Minimum pressure: 8 psi
• Recommended operating pressure: 15 psi
e. After ination, tighten the valve cap securely. Only the valve cap ensures nal airtightness.
4. Fin Installation
• The two side ns are pre-attached to the board.
• After ination, slide the middle n into its base
and secure it by inserting the xed pin.
4 5 6
7 8 9
www.SereneLifeHome.com
8
5. Ination Tips and Precautions
• Do not use an air compressor. Over-ination caused by an air compressor can damage the board and is not covered
under warranty.
• A slight pressure loss over 2–3 days is normal due to temperature changes. If needed, add air with the pump.
• Before long paddling trips, inate the board for 24 hours beforehand to ensure it is airtight.
If you notice consistent air loss, refer to the “Board Repair” section for leak detection instructions.
• Maximum pressure: Do not exceed 15 psi. Proper pressure is achieved when the board feels rm under hand pressure.
• Avoid pumping the board to high pressure and leaving it in direct sunlight for extended periods.
In hot environments, slightly deate the board, as heat will increase internal pressure.
• In colder water conditions, you may notice a slight pressure drop. Carry a pump with you to add air if necessary.
ALU Telescopic Kayak Paddle
Your paddle comes in three pieces. Follow these steps to assemble and adjust it:
1. Press and hold the button while sliding the paddle pieces together until they
click into place.
2. Adjust the top section of the paddle to nd the ideal height:
• Start with the paddle approximately 6 inches taller than your height.
• Adjust the top section up or down until the paddle length feels comfortable.
• A longer paddle is better for smooth, easy paddling, while a shorter paddle is
ideal for performance or competition.
Note: If the adjustable section feels loose after assembly, tighten the screw
with a screwdriver to ensure a secure t.
3. Board Ination Steps
a. Unscrew the valve cap and press down the valve pin to open the valve. Let air naturally ow into the board to save time.
Once some air has entered, press the valve pin again to return it to the “UP” position.
b. Ensure the pump hose is connected to the “INFLATE” outlet.
c. Connect the pump nozzle to the valve receptacle using a half-twist motion (clockwise).
d. Pump air into the board by sliding the pump piston up and down. Inate until the required pressure is reached:
• Minimum pressure: 8 psi
• Recommended operating pressure: 15 psi
e. After ination, tighten the valve cap securely. Only the valve cap ensures nal airtightness.
4. Fin Installation
• The two side ns are pre-attached to the board.
• After ination, slide the middle n into its base
and secure it by inserting the xed pin.
www.SereneLifeHome.com
9
• Adjustable Length: 63" – 83" (160 – 210 cm)
• Lightweight & Floating: 2.1 lbs (960 g)
• Shaft Material: Alloy 6005-T6, with 1.14" (29 mm) and 1.06" (27 mm) diameter sections
• Compact Design: Disassembles into three 31" (79 cm) sections for easy storage and transport
Operating Box
• Waterproof Rating: IP67
• Dimensions: 4.92" × 3.19" × 2.05" (125 × 81 × 52 mm)
• Input: DC 12V
• Output: 12V RGB
• Battery Type: 3 × 3.7V – 42V Li-ion Battery
• Battery Capacity:
• 1500mAh
• 11.1V – 12.6V, 2200mAh
• Charging Duration: Approx. 35 hours (5V, 2A)
Operating Box Setup Instructions
1. Install the Operating Box
• Insert the operating box (A) into the pedestal (C).
• Thread the screw (B) into the connecting hole
and tighten it securely.
A. Operating box
B. Installing screw
C. Pedestal
RGB LED Strip Lights
• Weight: 6.3 oz (180 g)
• Length: 23 ft (7 m) / 24.6 ft (7.5 m)
• Input: DC 12V
• Output Power: Max 19W
www.SereneLifeHome.com
10
2. Connect the LED Light Strip
• Insert the waterproof wire connector (D) into the LED light strip
waterproof connector (C).
• Tighten in the direction of the arrow to prevent water entry,
which could damage the LED strip.
3. Type-C Charging Port
D. Wire connection waterproof
E. LED light strip waterproof
www.SereneLifeHome.com
11
4. Operating Box Button Diagram
5. Power/Charging Indicator Light
Functions & Lighting Modes
FLASH Mode
• 7-Color Changing
• 7-Color Hopping
• 7-Color Flashing
• 3-Color Hopping
• 7-Color Brightness Adjustment
• 3-Color Brightness Adjustment
Brightness Levels: Five adjustable settings
Light is red when the power lower 40% ,
light is green when the power up 40%；
In-charge : red light ; Full charge : green light
STEADY Mode
• Red
• Pink
• Blue
• Yellow
• Green
• White
Attaching the LED Strip Lights
1. Locate the designated LED mounting points along the edges
of the board.
2. Carefully attach the LED strip lights.
3. Secure the strips.
4. Connect the LED strip lights to the operating box.
5. Ensure the battery is fully charged before use.
6. Use the power button on the operating box to turn the lights
on/o and cycle through colors.
www.SereneLifeHome.com
12
Operating Box Instructions
LED Light Strip On/Off
Left Button: Turns the LED strip on/o
Front Light Button
Right Button: Turns the front light on/o
LED Brightness Control Button
Press and Hold: Adjusts brightness within these levels:
• 20%
• 40%
• 60%
FLASH Mode Button
Press Briey: Cycles through lighting modes
STEADY Mode Button
Press Briey: Cycles through steady color modes
Waterproong & Connections
• Ensure the Operating Box and LED strip light are correctly
connected.
• Waterproof Level: IP67 (submersible in 3.3 ft (1 m) of water
for 30 minutes).
• Before use, ensure the charging plug cover on the front
light is securely xed to prevent water entry.
• Always check for a sucient power supply before use.
Operating Box General Safety
• Do not connect the LED strip or front light to any other
device to prevent damage.
• When using near water (e.g., boating), always wear a life
jacket and seat belt.
• Operating temperature: 32°F – 104°F (0°C – 40°C).
• Charging temperature: 50°F – 113°F (10°C – 45°C).
• For air travel, check airline regulations before transporting
the battery.
• Keep the Operating Box away from gasoline, rubber
solutions, and volatile substances.
WARNING
Battery Safety
• Keep the battery out of reach of children.
• If swallowed or inserted into any body part, seek
immediate medical attention—severe or fatal injuries
can occur within 2 hours.
• Handle with care and follow all safety instructions.
• 80%
• 100%
www.SereneLifeHome.com
13
Battery Handling
• Use only the provided charging plug. Using a dierent charger may impact battery performance, cause over-heating, or
lead to safety hazards.
• Keep the battery away from ammable materials, liquids, and surfaces.
• Do not throw the charging box into re.
• Do not place it in a microwave, high-pressure container, or induction cooker.
• Do not disassemble or repair the device—this may cause leakage, re, or electric shock.
• If you notice any abnormalities, stop using immediately and contact customer service.
Lithium Battery Charging Methods & Precautions
1. Avoid High-Temperature Charging:
Charging the battery above 95°F (35°C) can reduce its lifespan and damage the battery.
2. Avoid Low-Temperature Charging:
Below 39°F (4°C), battery performance is reduced.
Some batteries may not charge at all in extreme cold. However, once warmed up, they return to normal capacity.
3. Frequent Use Extends Battery Life
• Use the battery regularly to maintain optimal performance.
• If not in use for an extended period, charge it fully once a month to maintain battery health.
www.SereneLifeHome.com
14
LEAK DETECTION AND REPAIR
Air Leak Detection
If the board is losing air pressure (not due to temperature changes), check for leaks, starting with the valves. While a leaking
valve is rare, if you nd one, tighten it using the included wrench.
To locate a leak:
1. Mix soap and water in a spray bottle.
2. Spray the solution around the valve.
3. If you see bubbles forming, check the valve seating and base, ensuring the valve insert is tightly screwed.
4. If the issue persists, contact customer support.
If the valves are secure but the board is still losing air, there may be a small puncture. These can be repaired easily:
• Spray soap and water around the board until you see bubbles. Mark the leak location.
• If no bubbles appear, inate the board to maximum pressure and listen carefully.
• Once you narrow down the leak, use the spray bottle again to conrm the exact spot.
Repair Kit Instructions
For Punctures Smaller Than 1/8"
1. Deate the board and clean/dry the aected area.
2. Apply a small drop of glue over the puncture.
3. Allow it to dry for 12 hours before re-inating.
www.SereneLifeHome.com
15
Register Product
Thank you for choosing SereneLife.
By registering your product, you ensure that
you receive the full benets of our exclusive
warranty and personalized customer support.
Complete the form to access expert support
and to keep your SereneLife purchase in
perfect condition.
For Larger Tears/Rips
1. Deate the board completely and lay it at. Allow it to dry.
2. Cut a patch at least 2 inches larger than the tear on all
sides.
3. Clean the repair area with alcohol.
4. Apply three coats of adhesive to both the patch and the
board, waiting 5 minutes between coats.
5. Place the patch carefully over the tear. The adhesive reacts
quickly, so position it accurately.
6. Use a roller to ensure the patch is at and even.
7. Wait 24 hours before re-inating the board.
INSTRUCTIONS FOR CARE AND STORAGE
Follow these guidelines to maintain your board:
Before Storage:
• Rinse the board with fresh water and let it dry completely
to prevent mildew.
• Use only mild soap and water for cleaning—avoid harsh
chemicals.
Storage Options:
• You can store the board inated or deated.
• If deated, store it in the protective bag provided.
• If storing outdoors, keep it o the ground and covered
with a tarp to protect it from sun exposure.
What to Avoid:
• Hanging the board is not recommended.
• Do not store the board in extreme temperatures:
• Above 150°F (66°C)
• Below -10°F (-23°C)
• Do not roll the board too tightly when storing it deated.
Fixing Bent Fins:
Place them in boiling water and use a hairdryer to reshape
them.
Start Here
Serenelifehome.com/pages/register
Model Number:
SLSUP925LED
Questions or Comments
We are here to help!
Phone: 1.718.535.1800
Serenelifehome.com/ContactUs
