DT1
Website: www.fossibot.com
www.fossibot.com
Manufacturer:Shenzhen Qichang Intelligent Technology Co., Ltd
Address:Room 510, 5th Floor, Building 7, Yunli Smart Park, No.7
Changfa Middle Road, Yangmei Community, Bantian Street,
Longgang District, Shenzhen China
18
11000
%5
User Manual
SIM Card Ejector
3-Color
Indicator Ligit
L-sensor
Front Camera
Screen
FOSSiBOT
4QFBLFS4PVOE)PMF4QFBLFS4PVOE)PMF
5ZQF$1PSU 4*.5'DBSE
4QFBLFS4PVOE)PMF4QFBLFS4PVOE)PMF
Air Hole
Power
Flashlight
Cameras
Volume+
Volume-
Microphone
www.fossibot.com
fossibot.com
Manual-USB Cable-Charger-SIM card pin
Package box-Pad-User
3-farbig
Indikator Ligit
L-Sensor
Vordere Kamera
Bildschirm
5ZQ$"OTDIMVTT 4*.5',BSUF
-BVUTQSFDIFS
4DIBMMMPDI
-BVUTQSFDIFS
4DIBMMMPDI
-BVUTQSFDIFS
4DIBMMMPDI
-BVUTQSFDIFS
4DIBMMMPDI
18
11000
%5
Benutzerhandbuch
FOSSiBOT
Luftloch
Leistung
Taschenlampe
Kameras
Lautstärke+
Lautstärke-
Mikrofon
fossibot.com
Verpackungseinheit-Pad-Benutzerhandbuch-USB-
Kabel-Ladegerät-SIM-Kartenstecker
18
11000
%5
ɪɭɤɨɜɨɞɫɬɜɨɩɨɥɶɡɨɜɚɬɟɥɹ
FOSSiBOT
ɰɜɟɬɚ
ɂɧɞɢɤɚɬɨɪ
/ɫɟɧɫɨɪ
ɉɟɪɟɞɧɹɹ
ɤɚɦɟɪɚ
ɗɤɪɚɧ
ĻŚŜŞŞŔśŌ$ 4*.5'ŖŌŜŞŌ
ijŎşŖŚŎŚő
ŚŞŎőŜŝŞŔőŐŔřŌŘŔŖŌ
ijŎşŖŚŎŚő
ŚŞŎőŜŝŞŔőŐŔřŌŘŔŖŌ
ijŎşŖŚŎŚő
ŚŞŎőŜŝŞŔőŐŔřŌŘŔŖŌ
ijŎşŖŚŎŚő
ŚŞŎőŜŝŞŔőŐŔřŌŘŔŖŌ
ȼɨɡɞɭɲɧɨɟ
ɨɬɜɟɪɫɬɢɟ
ȼɥɚɫɬɶ
Ɏɨɧɚɪɢɤ
Ʉɚɦɟɪɵ
Ƚɪɨɦɤɨɫɬɶ
Ɉɛɴɟɦ
Ɇɢɤɪɨɮɨɧ
fossibot.com
ɉɚɤɟɬɧɚɹɤɨɪɨɛɤɚ
ɩɥɚɧɲɟɬɪɭɤɨɜɨɞɫɬɜɨɩɨɥɶɡɨɜɚɬɟɥɹɤɚɛɟɥɶ86%
ɡɚɪɹɞɧɨɟɭɫɬɪɨɣɫɬɜɨɤɨɧɬɚɤɬɧɚɹ6,0ɤɚɪɬɚ
Indicateur lumineux
à 3 couleurs
Capteur L
Caméra Frontale
Filtrer
1PSUEF5ZQF$ $BSUF4*.5'
0SJDF4POPSF
EV)BVU1BSMFVS
0SJDF4POPSF
EV)BVU1BSMFVS
0SJDF4POPSF
EV)BVU1BSMFVS
0SJDF4POPSF
EV)BVU1BSMFVS
18
11000
%5
Mode d'emploi
FOSSiBOT
Trou d'air
Pouvoir
Lampe de Poche
Appareils Photo
Volume+
Volume-
Microphone
fossibot.com
Boîte d'emballage - tablette - manuel d'utilisation -
câble USB - chargeur - broche pour carte SIM
18
カードはり針
11000
%5
FOSSiBOT
ϤʖδʖΪχ
৯නࣖ
ժ
νϕ&ϛʖφ 6,07)Ωʖχ
ηϒʖΩʖγΤϱχϙʖϩ ηϒʖΩʖγΤϱχϙʖϩ
ηϒʖΩʖγΤϱχϙʖϩ ηϒʖΩʖγΤϱχϙʖϩ
/ιϱγʖ
ϓϫϱφΩϟϧ
空気穴
ྙ
սు
Ωϟϧ
Խྖ
Խྖ
ϜέϫϓΧϱ
fossibot.com
ϏρχɼϤʖδʖϜωϣΠϩɼ86%ίʖϔϩɼ
ుحɼ6,0Ωʖχϒϱ
ϏρίʖζϚρέη ɼ
Indicatore a 3 colori Ligit
L-Sensore
Fotocamera
Frontale
Schermo
1PSUBEJ5JQP$ 4DIFEB4*.5'
'PSP4POPSP
EFMMBMUPQBSMBOUF
'PSP4POPSP
EFMMBMUPQBSMBOUF
'PSP4POPSP
EFMMBMUPQBSMBOUF
'PSP4POPSP
EFMMBMUPQBSMBOUF
18
11000
%5
FOSSiBOT
Manuale utente
Foro d'aria
Energia
Torcia Elettrica
Macchine Fotografiche
Volume+
Volume-
Microfono
fossibot.com
pad, manuale d'uso, cavo USB, caricabatterie, spinotto per scheda SIM
Scatola della confezione,
18
11000
%5
FOSSiBOT
Manual del usuario
3 colores
Luz indicadora
Sensor L
Cámara frontal
Pantalla
1VFSUPUJQP$ 5BSKFUB4*.5'
0SJDJPEFTPOJEP
EFMBMUBWP[
0SJDJPEFTPOJEP
EFMBMUBWP[
0SJDJPEFTPOJEP
EFMBMUBWP[
0SJDJPEFTPOJEP
EFMBMUBWP[
Agujero
de aire
Fuerza
Linterna
Cámaras
Volumen+
Volumen-
Micrófono
fossibot.com
Caja, almohadilla, manual
de usuario, cable USB, cargador, pin para tarjeta SIM
ϝϭϥϝϡ΅εέ/LJLW
Ραα/
ϝϙϡϱέϝϡϡϱΓ
εεΓ
منفذ5ZQF$ بطاقة4*.5'
فتحةصوتالسماعة فتحةصوتالسماعة
فتحةصوتالسماعة فتحةصوتالسماعة
18
11000
%5
ΩϝϱϝϝαΕΥΩϡ
ΙϕΏϝϩϭ˯
ϕϭΓ
ϡιΏΡϱΩϭϱ
ϝϙϡϱέΕ
ΡΝϡ
ϡϕΩέ
ϡϱϙέϭϑϭϥ
FOSSiBOT
fossibot.com
ιϥΩϭϕϝωΏϭΓˬϭαΩΓˬΩϝϱϝϝϡαΕΥΩϡˬϙΏϝ86%ˬεΡϥ
ˬΩΏϭαΏρϕΓ6,0
RF Specification:
Function
Operation Frequency
Max RF output power:
BLE
2402MHz–2480MHz
<10dBm
BT(BR+EDR)
2402MHz–2480MHz
<10dBm
WIFI 802.11b/g/
n(HT20/40)
802.11b/g/n(20MHz): 2412~2472MHz;
802.11n(40MHz):2422~2462MHz
<20dBm
Wi-Fi
5.2G(802.11a/n20/n40/a
c20/ac40/ac80)
802.11a/ n20/ac20:5180MHz~5240MHz
802.11 n40/ac40:5190MHz~5230MHz
802.11 ac80:5210MHz
<20dBm
Wi-Fi
5.8G(802.11a/n20/n40/a
c20/ac40/ac80)
802.11a/ n20/ac20:5180MHz~5240MHz
802.11 n40/ac40:5190MHz~5230MHz
802.11 ac80:5210MHz
<13.98dBm
GSM/GPRS/EGPRS 900
TX(Uplink):880M‐915MHZ;
RX(Downlink):925M‐960MHZ
<36dBm
GSM/GPRS/EGPRS
1800
TX(Uplink):1710M‐1785MHZ;
RX(Downlink):1805M‐1880MHZ
<33dBm
WCDMA B1
TX(Uplink):1920-1980MHz;
RX(Downlink):2110-2170MHz
<25dBm
WCDMA B8
TX(Uplink): 880-915MHz;
RX(Downlink):925-960MHz
<25dBm
LTE FDD B1
TX(Uplink):1920-1980MHz;
RX(Downlink):2110-2170MHz
<25dBm
LTE FDD B3
TX(Uplink) :1710-1785MHz;
RX(Downlink):1805-1880MHz
<25dBm
LTE FDD B7
TX(Uplink) :2500-2570MHz;
RX(Downlink):2620-2690MHz
<25dBm
LTE FDD B8
TX(Uplink): 880MHz to 915 MHz
RX(Downlink): 925 MHz to 960 MHz
<25dBm
LTE FDD B20
TX(Uplink) 832MHz~862MHz;
RX(Downlink)791MHz~821MHz
<25dBm
LTE FDD B28
TX(Uplink) 703 MHz to 748MHz
RX(Downlink) 758 MHz to 803 MHz
<25dBm
LTE TDD B38
TX(Uplink)& RX(Downlink)
2570 MHz to 2620 MHz
<25dBm
LTE TDD B40
TX(Uplink)& RX(Downlink)
2300 MHz to 2400 MHz
<25dBm
FM
Rx(Downlink): 87.5MHz~108MHz
--
GPS
Rx(Downlink): 1.57542GHz
--
Warning:
1.Use careful with the earphone maybe possible excessive sound pressurefrom earphones and headphones
can cause hearing loss.
2. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BYAN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDINGTO THE
INSTRUCTIONS.
3. The product shall only be connected to a USB interface of version USB2.0.
4. Adapter shall be installed near the equipment and shall be easily accessible.
5. Operation temperature:-10~40ºC.
6. The plug considered as disconnect device of adapter.
7. SAR: The device complies with RF specifications when the device used at 0.5cm from your body (SAR limit
2.0 W/Kg). The device is in compliance with the requirements.
Restrictions in the 5 GHz band:
According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be
subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic
(CZ),Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain(ES), France (FR), Croatia
(HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania(LT), Luxembourg (LU), Hungary (HU), Malta (MT),
Netherlands (NL), Austria(AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK),Finland
(FI), Sweden (SE),, Turkey (TR), Norway(NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI).
The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5250 MHz
frequency range.
ES
LU
RO
CZ
FR
HU
SI
DK
HR
BE
BG
DE
EE
IE
EL
IT
Cy
LV
LT
SK
MT
NL
AT
PL
PT
FI
SE
TR
NO
CH
IS
LI
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
This Product meets the government's requirements for exposure to radio waves. The guidelines
are based on standards that were developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies.The standards include a substantial safety
margin designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is1.6 W/kg averaged
over one gram of this Mobile Phone (FCC ID:2BAK2-DT1) has been tested against this SAR limit.
SAR information on this can be viewed on-line at http://www.fcc.gov/oet/ea/fccid/. Please use the
device FCC ID number for search. The device has been evaluated to meet general RF exposure
requirements. The device can be used in portable exposure conditions without restriction.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the followingmeasures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC ID:2BAK2-DT1
