&DVW6WRQH)LUH3LW
0RGHO1R65)3&
4XHVWLRQVSUREOHPVPLVVLQJSDUWV"%HIRUHUHWXUQLQJWR\RXUUHWDLOHUFDOORXUFXVWRPHU
VHUYLFHGHSDUWPHQWDWDPSP3670RQGD\)ULGD\RUVHQGDQ
HPDLOWRFXVWRPHUVHUYLFH#VKLQHULFKXVIRUKHOS
1
-2-
PARTS LIST:
.YTQNOITPIRCSED#TRAP
A
Cast stone base
1
B
Fire bowl
1
1
C Charcoal grid
D
Mesh screen cover
1
E
Lifting tool
1
HARDWARE LIST:
.YTQNOITPIRCSED#TRAP
F
M6 Ring Screw
G
M6 Nut
1
1
C
B
A
D
E
Step 1: Choose a level location for assembly. Remove all parts from the packaging,
and check for missing parts.
Step2: AttachtheM6ringscrew(F)tothemeshscreencover(D)usingoneM6Nut(G)
asshowninFig.1.
Step 3: Place all parts on the cast stone base as shown in Fig. 2.
ASSEMBLY
Fig.1
Fig.2
C
B
A
D
E
G
F
D
WARNING:TO AVOID INJURY
1. FOR OUTDOOR USE ONLY.
2. Do not use the fire pit indoors. Because of hazardous carbon monoxide fumes,
a lack of ventilation can cause death.
3. Do not use gasoline or kerosene to start fires in the fire pit. Keep all flammable
liquids away from the fire pit.
4. This unit is designed to burn charcoal and untreated wood only. Fill the bottom
of the bowl with sand until the surface of sand is 15 mm below the grill.
5. Do not use under or on combustible structures/surfaces including wooden decks.
6. Use protective gloves and long-handled tools with this fire pit.
7. Dispose of packaging materials properly.
8. Keep children away from hot fire pit.
9. Fire pit remains very hot for a period of time after using.
10. Be sure fire pit is cool before attempting to move it.
11.
12.
Do not burn charcoal over 1.6 lb. and untreated wood over 3 lb. at one time.
The handle of the tools may become hot during and after use. The fire bowl
should not be used on a combustible surface (including wood decks), and
should be placed no closer than 24 inch from walls during use.
-4-
WARNINGS AND CAUTIONS
Inspecting
Inspect this fire pit on a regular basis to ensure product safety and longer product
life. DO NOT attempt to inspect this outdoor fire pit until the fire is COMPLETELY
out and cooled down.
1. Check handles to make sure they are secure.
2. Check components for any signs of damage or rust.
3. If damage to any component is detected, do not operate until repairs are made.
Cleaning
This outdoor fire pit should be cleaned on a regular basis to promote safer use and
longer product life.
Note: After repeated use, a slight discoloration of the finish may occur.
DO NOT attempt to clean this outdoor fire pit until the fire is COMPLETELY out and
cooled down.
DO NOT use oven cleaner or abrasive cleaners as they will damage this product.
DO NOT clean any part of this outdoor firepit in a self-cleaning oven as it may
damage this finish.
1. Wipe exterior surfaces with a mild dishwashing detergent or baking soda.
2. For stubborn surfaces use a citrus based degreaser and a nylon scrubbing brush.
3. Rinse clean with water.
4. Remove built-up creosote from components with a chimney cleaning product.
Storage
DO NOT move or store this outdoor fire pit until the fire is COMPLETELY out and
cooled down.
1. Once the fire is out, coals are cold and outdoor fire pit is cooled to touch, remove
ashes and properly dispose.
2.
Store assembled in a location away from children and pets.
-5-
CARE AND MAINTENANCE
6
ONE-YEAR-LIMITED WARRANTY
Need help?
call our toll free number at:
1-8- or
HPDLOXVDW
EWUVQOGTUGTXKEG"UJKPGTKEJWU
