When using electrical appliances, especially when children are present, basic
safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING.
KEEP AWAY FROM WATER.
DANGER
As with most electrical appliances, electrical parts are electrically live even
when the power switch is off. To reduce the risk of death by
electric shock:
• Always unplug this appliance from the electrical outlet immediately after using.
• Do not use while bathing or in the shower.
• Do not place or store this appliance where it can fall or be pulled into a tub or sink.
• Do not place in or drop into water or other liquid.
• Do not reach for an appliance that has fallen into water. Unplug it immediately.
• Unplug this appliance before cleaning it.
WARNING
To reduce the risk of burns, fire, electric shock, or injury to people:
• An appliance should never be left unattended when it is plugged in.
• Close supervision is necessary when this appliance is used by, on, or near
children or individuals with certain disabilities or special needs.
• Use this appliance only for its intended use as described in this manual. Do not
use attachments not recommended by manufacturer.
• Never operate this appliance if it has a damaged cord or plug, if it is not
working properly, if it has been dropped or damaged, or if it has been dropped
into water.
• Keep the cord away from heated surfaces. Do not wrap the cord around
the appliance.
• Never use while sleeping.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
• Never block the air openings of the appliance or place it on a soft surface,
such as a bed or couch, where the air openings may be blocked. Keep the air
openings free of lint, hair, and the like.
• Never drop or insert any object into any of the appliance’s openings.
• Do not use outdoors or operate where aerosol (spray) products are being used
or where oxygen is being administered.
• Do not use an extension cord.
• This appliance is hot when in use. Do not let eyes or bare skin touch
heated surfaces.
• Do not place the heated appliance directly on any surface while it is hot or
plugged in.
• This appliance has a polarized plug (one blade is wider than the other). As a
safety feature, this plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this safety feature.
• Always store this appliance and cord in a moisture-free area. Do not store it in
temperatures exceeding 140°F (60°C).
• This appliance is for household use only.
• Do not plug or unplug this appliance when your hands are wet.
KEEP AWAY FROM CHILDREN
Product Features
Thank you for purchasing the REMINGTON
®
Flat Iron and Curler. Please carefully
read the instructions contained in the booklet and keep them in a safe place for
future reference.
A high-performing flat iron that easily converts into a curler with
the slide of a cover – one high-performing tool for many styles.
S33A Series
Key Features:
• The FlexiCover™ sleeve seamlessly switches from flat iron to curler
1
• Dual heat system heats the flat iron and curler separately
• One-pass styling
2
with 1 ¼” smooth ceramic flat iron/curler
• Digital temperature control – up to five temperature choices with LED display
(plates: 300° F–450° F; barrel: 300° F–410° F)
• Ultra-fast heat – 20-second heat-up
• 2X more heaters
3
for consistent heat
• Ceramic plates for even, full contact heat
• Ceramic Titanium Griptech
TM
barrel for slip resistance
• Hinge lock
• Flexible swivel cord
• Additional safety measures
• FlexiCover™ sleeve high-heat material
• Cool tip
• Automatic safety shut-off – automatically turns off after approximately 1hour
Register Your New Product Today!
By registering your new REMINGTON
®
product, you will receive special offers.
Register online at: RemingtonProducts.com
Use and
Care Guide
1. Cool Tips
2. Ceramic Griptech
TM
Barrel
3. FlexiCover™ Sleeve
4. Ceramic Plates
5. LED Mode Display
6. Temperature Control Buttons (+/−)
7. On/Off Button
8. Swivel Cord
9. Hinge Lock
10. Hair Clips (may be sold separately)
Straightener Features
How to Use
Selecting a Styling Mode
When the FlexiCover™ sleeve is positioned over the barrel, the appliance is in
Plate Mode (flat iron) and only the plates will heat up. When the FlexiCover™
sleeve is slid down over the handle and locked in place, the appliance is in Barrel
Mode (curler) and only the barrel will heat up and the plates will automatically
turn off.
Heat Settings
Take extra care when using a professional styler. To prevent hair damage, make
sure to use the correct temperature setting for your hair type.
Select the appropriate temperature for your hair type from the table below.
Recommended Temperatures
Plate Mode:
Temperature Hair type
300° F–340° F Thin/fine or easy to style
340° F–375° F Color treated
375° F–410° F Textured
410° F–450° F Thick and harder to style
Barrel Mode:
Temperature Hair type
300° F–340° F Thin/fine or easy to style
340° F–375° F Color treated
375° F–410° F Textured or thick and harder to style
BAR REL MODE
(USE TO CURL)
2. SLIDE FLEXICOVER1. SET TEMPERAT URE &
L OCK HINGE
PLATES MODE
(USE TO STRAIGHTEN
OR CURL)
1. SLIDE FLEXICOVER 2. UNLOCK HINGE &
SET T EMPERAT URE
Usage Tips
Straightening Your Hair
1. Your hair should be dry and free of tangles before using the styling iron.
2. Plug the styler into an electrical outlet. Press and hold the On/Off Button until the
appliance turns on and the LED lights up.
3. Use the Temperature Control Buttons (+/−) to adjust the temperature. The
maximum temperature available in Plate Mode is 450° F. The display will flash
while the appliance heats up and then glow steadily when it has reached the
selected temperature.
4. Divide your hair into manageable sections and clip the upper layers on top of
your head out of the way. Work with underneath layers first.
5. Test the styler on a small section of hair. Then, adjust the temperature up or
down before styling the rest of your hair.
NOTE: If you find that you need a higher or lower temperature setting while
straightening your hair, simply adjust the setting. If you need a lower setting,
because the appliance is already hot, it may take a few minutes to cool off.
6. Take a small section of hair, pull it down and away from your scalp, and hold the
hair taut.
7. Starting at the roots, clamp your hair firmly between the plates and run the styler
down the entire hair strand from root to tip in one smooth stroke. Do not hold the
styler in one area for a long period of time because damage to hair may occur.
8. Repeat with all the sections of your hair, working with the underneath layers first
and then the top and sides to finish.
9. When you are finished styling, press and hold the On/Off Button to turn the
appliance off, unplug the appliance, and allow the appliance to cool
before storing.
1
The FlexiCover™ sleeve will become hot when in fl at iron mode. The LED light
will blink for 2 minutes while the FlexiCover™ sleeve is changed from fl at iron
mode to curler mode. Please wait 2 minutes before starting curling operation to
avoid burning your hands from contact with the FlexiCover™ sleeve.
2
Varies by hair type and technique.
3
Based on two individual heating systems vs. a standard REMINGTON
®
tool one
heating system.
Using the Temperature Control Buttons (+/−)
• Set to your desired temperature setting.
• During heat-up time, the LED temperature display will pulse until the desired
temperature is reached.
• When the appliance reaches the desired temperature, the pulsing will stop and
the set temperature will be displayed.
Automatic Safety Shutoff
After approximately one hour, the appliance will automatically shut itself off. To
reactivate the appliance, press the On/Off Button.
™
1
2
4
3
5
6
7
9
8
10
Cleaning
Make sure the appliance is unplugged and cool. Use a damp cloth to clean the
plates and the outside of the power handle. No other maintenance of the appliance is
required. This appliance has no user-serviceable parts.
Storage
Unplug the appliance whenever it is not in use. Allow it to cool and then store it
out of reach of children in a safe, dry location.
Never wrap the cord around the appliance. This will cause the cord to wear
prematurely and break, thus voiding the warranty. Handle the cord carefully and
avoid jerking, twisting, or straining it, especially at plug connections. If the supply
cord is damaged, it must be replaced by the manufacturer, its service agent, or
similarly qualified persons in order to avoid a hazard.
Maintenance
120 VAC 60 Hz TYPE: S33A
Questions or comments: Call 800-736-4648 in the U.S.
or visit RemingtonProducts.com.
Dist. by Empower Brands, LLC, Middleton, WI 53562
® Registered Trademark and
TM
Trademark of Empower Brands, LLC
© 2023 Empower Brands, LLC. All rights reserved. 4/23 29778
Made in China. T22-7002875-C
Usage Tips
≤ 20 seconds
≤ 20 seconds
1. Select your desired barrel temperature,
press the plates together, and lock the
hinge to turn the appliance into a wand.
Wrap a ¾–1½-inch (2–4 cm) section
of hair around the barrel with the ends
wrapped last.
2. Keep your hair around the barrel by holding
the tips of the hair with your fingers. For
tight curls or harder-to-curl hair, hold the
appliance in place for up to 20seconds.
Hold for less time if you hair is easier to curl
or if you want loose curls or waves.
3. When you are ready to release the curl,
unwind about half a turn (slightly more for
longer hair). Release the tips of your hair
and gently withdraw the barrel from the
center of the curl.
4. Allow the curl to cool and try not to
disturb the curls while proceeding in the
same manner around your whole head.
1. Place a ¾–1½-inch (2–4 cm)
section of hair between the plates
near the roots. Close the plates.
2. Hold the tips together and rotate the
styler downward toward your head
one half turn only (180°). The formerly
outward side is now inward.
3. Very slowly glide the styler in this
position down the entire length of
the hair without stopping.
4. Release your hair from the styler.
Repeat curling around the head.
1. Clamp a ¾–1½-inch (2–4 cm)
section of hair between the
unheated plates, clamping near
the roots.
2. Grasp the safety tip with the
other hand, slightly loosen the
styler, and gently roll the hair
onto the barrel while keeping
the hair taut.
3. For tight curls or harder-to-curl
hair, hold the appliance in place
for up to 20 seconds. Hold for
less time if your hair is easier to
curl or if you want loose curls
or waves.
4. When you are ready to release
the curl, unwind about half a turn
(slightly more for longer hair).
Release the hair that is clamped
between the plates and gently
withdraw the barrel from the
center of the curl.
5. Allow the curl to cool and try
not to disturb the curls while
proceeding in the same manner
around your whole head.
1. Place a ¾–1½-inch (2–4 cm)
section of hair between the plates
near the roots. Close the plates.
2. Hold the tips together and rotate the
styler upwards away from your head
one half turn only (180°). The formerly
outward side is now inward.
3. Very slowly glide the styler in this
position down the entire length of
the hair without stopping.
4. Release your hair from the styler.
Repeat curling around the head.
Barrel Mode, Wand Curling
In Plates Mode (flat iron), curl tightness may vary by the amount of time your hair is heated and the speed at which the appliance is used to curl. Slower speeds
and steady heat will result in tighter curls with a uniform shape. Quicker speeds with steady heat will result in looser curls and a more natural shape.
Plates Mode – Half-Rotation Downwards
Barrel Mode, Clipped Curling
Plates Mode - Half-Rotation Upwards
Curling Your Hair
The REMINGTON
®
Flat Iron and Curler can create waves and curls in a variety of different ways. In Barrel Mode (curling) with the FlexiCover™ sleeve in place, set
your desired barrel temperature. The maximum temperature available in Barrel Mode is 410° F. To change the temperature while in Barrel Mode, unlock the hinge
lock and select your new desired temperature. Start by sectioning hair, and keep smooth.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
CAN ICES-003 (B)/NMB-003 (B).
Please do not throw this product away with normal household waste.
If possible, take it to an official collection point in your area that recycles this
type of product. Thank you for considering the environment.
Limited Three-Year Warranty
Empower Brands, LLC warrants this product to the original purchaser against any
defects that are due to faulty material or workmanship for a three-year period
from the original date of consumer purchase. This warranty does not include
damage to the product resulting from accident or misuse.
If the product should become defective within the warranty period, we will
replace it free of charge. Return your product and sales receipt with your name,
address and day time phone number to: Remington Returns Center, 507 Stokely
Dr., P.O. Box 1, Deforest, WI 53532. For more information call 800-736-4648.
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY PURPOSES.
This warranty does not cover products damaged by the following:
• Accident, misuse, abuse or alteration of the product
• Servicing by unauthorized persons
• Use with unauthorized accessories
• Connecting it to incorrect current and voltage
• Any other conditions beyond our control
No responsibility, obligation, or liability is assumed for the installation or
maintenance of this product.
Warranty
EMPOWER BRANDS, LLC SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IM PLIED
WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION
TO THREE YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other
rights which vary from state to state. Some states do not allow the exclusion or
limitation of incidental, special or consequential damages.
This warranty shall not be valid where it is contrary to U.S. and other
applicable laws, or where the warranty would be prohibited under any
economic sanctions, export control laws, embargos, or other restrictive trade
measures enforced by the United States or other applicable jurisdictions. This
includes, without limitation, any warranty claims implicating parties from, or
otherwise located in, Cuba, Iran, North Korea, Syria and the disputed Crimea
region.
Empower Brands, LLC Money-Back Offer
If within 30 days after you have purchased your Remington
®
branded product from
an authorized source, you are not satisfied and would like a refund, return it with
the sales receipt indicating purchase price and date of purchase to the retailer from
whom it was purchased. Empower Brands, LLC will reimburse all retailers who accept
the product within 30 days from the date of purchase. If you have any questions
concerning the money-back guarantee, please call 800-736-4648 in the U.S.
Remington Guarantees Satisfaction After 30 Days!
Remington 60-Day Money Back Guarantee
1
If within 60 days after purchasing any Remington
®
product, you are not completely
satisfied and would like a refund, return it with the original dated sales receipt
directly to Remington and receive a full refund.
2
For questions concerning the
money-back guarantee, please call 800-736-4648 in the U.S.
1
Applies to U.S. customers’ returns only.
2
Terms and conditions apply.
1. Refund will be in the form of a check issued in U.S. Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later than
60 days after purchase of the Remington
®
product:
a. The Remington
®
product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned product
was used in accordance with the instruction booklet (included with the product
at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Dr., P.O. Box 1
Deforest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged product.
7. Please allow 4–6 weeks to receive your refund by check.
